12-C-0002_AWARD.pdf

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

SEE SCHEDULE

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES 21. QUANTITY 22. UNIT 24. AMOUNT

PAGE 2 OF

23. UNIT PRICE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV 3/2005) BACK

Prescribed by GSA

FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

W911RQ-12-C-0002

Section SF 1449 - CONTINUATION SHEET

PURCHASE DESCRIPTION

Purchase Description Wheeled Crane

Red River Army Depot has a requirement for one (1) each of the following item:

Description: Pre-Owned 30 Ton Rough Terrain Crane

Minimum Specifications (completed description):

a. 30 Ton lifting capacity

b. 360 degree rotating cab

c. Swing away extension jib: 26 ft-43/45 ft

d. Winch/hoist: Two (2) speed

e. Power: Diesel Engine

f. Multiple forward & Reverse speeds with reverse alarm

g. Tires: Nominal 20.5x25-24 ply

h. Four wheel drive, four wheel steering

i. Fully independent multi-position out and down outriggers

j. Rated capacity indicator with automatic function disconnects

k. Full lighting package with turn indicators

l. Hook block: 30 Ton, 3 sheave with swivel hook & safety latch

m. Top swivel ball: 8.5 ton +/- ½ ton with hook & safety latch

n. Air Conditioned Cab

o. .62” X 450’ Auxiliary Cable

p. Run time is not to exceed 3500 hours.

Manufacturer and Stock Number or Part Number: Link-Belt RTC-8030 or equal.

Quantity: 1 Each

Shipping: FOB Destination

INSPECTION

A representative from Red River Army Depot (RRAD) will conduct a technical inspection of the item prior to acceptance – this will occur in three phases:

Phase One will be to determine that the vehicle is suitable to specifications and requirements.

Phase Two will be to ensure that the add-on jib and winch meet technical specifications and requirements.

Phase Three will be a final inspection upon receipt at RRAD for acceptance and payment purposes.

An RRAD representative may travel to the vendor’s site or vehicle site to conduct phase one before any modifications take place. It will be the using offices determination if a site visit is requirement or this can be determined via photographs.

The purpose of this is to avoid vendor time and expenses to have a vehicle rejected for condition or technical issues.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each $221,000.00 $221,000.00 Wheeled Crane

FFP

Pre-owned 30T Rough terrain crane, Standard equipment including: Main winch roller, Auxiliary winch, Auxiliary winch roller, air conditioned cab, 360 degree rotating cab, Auxiliary lifting sheave 27'-44' JIB (FLY), 8.5 Ton Hook & Ball, 30T Hook Block, .62"X 450' Auxiliary cable. Run Time: Maximum 3500 hours.

Manufacturer and Model/Part #: LINK-BELT RTC-8030 or equal.

FOB: Destination

NSN: 4WNR2:LINKBELTC

MILSTRIP: W45G18121400VJ

PURCHASE REQUEST NUMBER: W45G18121400VJ

ADDITIONAL MARKINGS: POC; June Jennings (903) 334-3447

NET AMT $221,000.00

ACRN AA

CIN: W45G18121400VJ0001

$221,000.00

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 05-MAR-2012 1 RED RIVER ARMY DEPOT

M/F BLDG 499

100 JAMES CARLOW DRIVE

TEXARKANA TX 75507-5000

FOB: Destination

W911RQ

ACCOUNTING AND APPROPRIATION DATA

AA: 97X4930AAPP6D 31E13A9000W45G18121400VJAAPPI8041117

AMOUNT: $221,000.00

CIN W45G18121400VJ0001: $221,000.00

CLAUSES INCORPORATED BY REFERENCE

52.212-4 Contract Terms and Conditions--Commercial Items JUN 2010 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.247-34 F.O.B. Destination NOV 1991

CLAUSES INCORPORATED BY FULL TEXT

52.000-4003 ISO 9001-2008 REGISTERED (Jan 2010) Red River Army Depot, an ISO 9001-2008 registered industrial complex, is committed to quality.

52.000-4953 WIDE AREA WORKFLOW INFORMATION/INSTRUCTIONS - SUPPLIES (Jun 2008)

(TACOM)

To implement DFARS 252.232-7003, “ELECTRONIC SUBMISSION OF PAYMENT REQUESTS”, Red River Army Depot uses Wide Area WorkFlow — Receipt and Acceptance (WAWF-RA) to electronically process vendor requests for payment. This application allows DoD vendors to submit and track invoices and receipt/acceptance documents electronically.

The contractor is required to use WAWF-RA when processing invoices and receiving reports under this order. Submission of hard copy DD250/invoices will no longer be accepted for payment.

The contractor shall register to use WAWF-RA at https://wawf.eb.mil. There is no charge to use WAWF. All questions relating to system setup and vendor training can be directed to the help desk at Ogden, UT. They can be reached at 1-866-618-5988 or 1-801-605-7095. Web-based training for WAWF is also available at http://www.wawftraining.com/ . If you are new to WAWF, please visit our website at https://redriver.army.mil.

Click on the Procurement button on the left. At the New Information for Vendors line, click on Access Information about Wide Area Workflow (WAWF). This will take you to the WAWF Getting Started Guide for Vendors. Print this guide for step by step instructions.

IMPORTANT INFORMATION:

http://www.wawftraining.com/� https://redriver.army.mil/�

PLEASE SUBMIT YOUR INVOICE/RECEIVING REPORT IN WAWF WHEN YOU SHIP YOUR ITEMS. WE

HAVE NOTHING TO RECEIVE YOUR SHIPMENT AGAINST IF THE INFORMATION HAS NOT BEEN

SUBMITTED IN WAWF WHEN YOUR DELIVERY ARRIVES.

INCLUDE THE PURCHASE REQUEST NUMBER IN THE LINE ITEM DESCRIPTION. YOU WILL FIND IT

UNDER THE LINE ITEM DESCRIPTION ON THIS ORDER.

THE FOLLOWING CODES WILL BE REQUIRED TO ROUTE YOUR INVOICES THROUGH WAWF.

All codes are required for proper processing.

[X] Invoice and Receiving Report (Combo)

[X] Contractor CAGE Code

[X] Pay D0DAAC: HQ0303

[X] Issue DoDAAC: W911RQ

[X] Admin D0DAAC: W911RQ

[X] Inspect by D0DAAC: W911RQ

[X] Contracting Officer: W911RQ

[X] Ship To Code: W911RQ

Contractor: WAWF will prompt asking for “additional e-mail submission” after clicking “SIGNATURE”. There are currently no additional e-mail submissions required.

The paying office DoDAAC and mailing address will be located on the front of your award. You can track your payment information on the DFAS website at http://www.dod.mil/dfas/contractorpay/myinvoice.html. Your purchase order/contract number or invoice will be required to inquire about status of your payment.

Questions concerning payment should be directed to the Defense Finance Accounting Services (DFAS) Centralized Customer Service Contact Center at 1-800-756-4571. Please have your order number and invoice ready when calling about payment status.

52.211-4009 DELIVERIES TO RED RIVER ARMY DEPOT (RRAD) (Aug 2009) Beginning August 10, 2009, all drivers will be required to schedule an appointment for delivery at least 24 hours in advance. On numerous occasions DDRT has seen an increase in the number of trucks arriving for delivery at the same time which resulted in trucks not being unloaded within the free time allotted. This increases costs in the form of detention charges to DOD.

Deliveries will be scheduled for Monday-Friday, 0700-1300. A copy of each bill needs to be emailed or faxed to the POC at CML (903)334-2208 or CML (903) 334-2881. POC’s are available Monday-Saturday 0700-1730 with the exception of government holidays. For directions, please call CML (903) 334-3060. Trucks are to enter through the commercial carrier route entrance and are to report to Building 23 Truck Control, 30 minutes prior to their scheduled appointment. Carriers that arrive at Truck Control without appointments will be placed at the end of the day’s schedule unless there is an earlier opening and will be worked /unloaded as soon as possible.

To schedule an appointment send an e-mail to ddrt-appt@dla.mil.

mailto:ddrt-appt@dla.mil�

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (AUG 2011)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (SEP 2006), with Alternate I (OCT 1995) (41 U.S.C. 253g and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010)(Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUL 2010) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) 52.204-11, American Recovery and Reinvestment Act—Reporting Requirements (JUL 2010) (Pub. L.

111-5).

_X__ (6) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (DEC 2010) (31 U.S.C. 6101 note).

_X__ (7) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (section 740 of Division C of Public Law 111-117, section 743 of Division D of Public Law 111-8, and section 745 of Division D of Public Law 110-161).

___ (8) 52.219-3, Notice of Total HUBZone Set-Aside or Sole-Source Award (JAN 2011) (15 U.S.C. 657a).

___ (9) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JAN 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

___ (10) [Reserved].

___ (11)(i) 52.219-6, Notice of Total Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644).

___ (ii) Alternate I (OCT 1995) of 52.219-6.

___ (iii) Alternate II (MAR 2004) of 52.219-6.

___ (12)(i) 52.219-7, Notice of Partial Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644).

___ (ii) Alternate I (OCT 1995) of 52.219-7.

___ (iii) Alternate II (MAR 2004) of 52.219-7.

___ (13) 52.219-8, Utilization of Small Business Concerns (JAN 2011) (15 U.S.C. 637 (d)(2) and (3)).

___ (14)(i) 52.219-9, Small Business Subcontracting Plan (JAN 2011) (15 U.S.C. 637(d)(4)).

___ (ii) Alternate I (OCT 2001) of 52.219-9

___ (iii) Alternate II (OCT 2001) of 52.219-9.

___ (iv) Alternate III (JUL 2010) of 52.219-9.

___ (15) 52.219-14, Limitations on Subcontracting (DEC 1996) (15 U.S.C. 637(a)(14)).

___ (16) 52.219-16, Liquidated Damages--Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (17)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT

2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).

___ (ii) Alternate I (JUNE 2003) of 52.219-23.

___ (18) 52.219-25, Small Disadvantaged Business Participation Program--Disadvantaged Status and Reporting

(DEC 2010) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

___ (19) 52.219-26, Small Disadvantaged Business Participation Program--Incentive Subcontracting (OCT 2000)

(Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

___ (20) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (MAY 2004)

(U.S.C. 657 f).

___ (21) 52.219-28, Post Award Small Business Program Rerepresentation (APR 2009) (15 U.S.C.

632(a)(2)).

___ (22) 52.219-29 Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (APR 2011).

___ (23) 52.219-30 Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (APR 2011).

_X__ (24) 52.222-3, Convict Labor (JUNE 2003) (E.O. 11755).

_X__ (25) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JUL 2010) (E.O. 13126).

_X__ (26) 52.222-21, Prohibition of Segregated Facilities (FEB 1999).

_X__ (27) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

_X__ (28) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212).

_X__ (29) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 2010) (29

U.S.C. 793).

_X__ (30) 52.222-37, Employment Reports on Veterans (SEPT 2010) (38 U.S.C. 4212).

_X__ (31) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

___ (32) 52.222-54, Employment Eligibility Verification (JAN 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (33) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(c)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (34) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b)

___ (35)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products

(DEC 2007) (E.O. 13423) .

___ (ii) Alternate I (DEC 2007) of 52.223-16. .

_X__ (36) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011).

___ (37) 52.225-1, Buy American Act--Supplies (JUNE 2003) (41 U.S.C. 10a-10d).

___ (38)(i) 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (JUN 2009) (41 U.S.C. 10a- 10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138).

___ (ii) Alternate I (JAN 2004) of 52.225-3.

___ (iii) Alternate II (JAN 2004) of 52.225-3.

___ (39) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X__ (40) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (41) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (42) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

___ (43) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C. 255(f), 10

U.S.C. 2307(f))

___ (44) 52.232-30, Installment Payments for Commercial Items (OCT 1995) (41 U.S.C. 255(f), 10 U.S.C.

2307(f)).

_X__ (45) 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003) (31

U.S.C. 3332).

___ (46) 52.232-34, Payment by Electronic Funds Transfer--Other than Central Contractor Registration (MAY

1999) (31 U.S.C. 3332)

___ (47) 52.232-36, Payment by Third Party (FEB 2010) (31 U.S.C. 3332).

___ (48) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

___ (49)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C.

Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (APR 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

____ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 1989) (29 U.S.C. 206 and 41 U.S.C.

351, et seq.).

____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act--Price Adjustment (Multiple Year and

Option Contracts) (SEP 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act--Price Adjustment (SEP 2009) (29 U.S.C.

206 and 41 U.S.C. 351, et seq.)

____ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

____ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--

Requirements (FEB 2009) (41 U.S.C. 351, et seq.).

____ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247).

____ (8) 52.237-11, Accepting and Dispensing of $1 Coin (SEP 2008)(31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (APR 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note).

(ii) 52.219-8, Utilization of Small Business Concerns (DEC 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) Reserved.

(iv) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 1998) (29 U.S.C. 793).

(vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

Alternate I (AUG 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-- Requirements (FEB 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (JAN 2009).

(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.246-4001 INSPECTION AND ACCEPTANCE (Apr 1994)

Red River Army Depot Texarkana, Texas

52.247-4049 PACKAGING & MARKING (Apr 1994) Material is to be packaged and packed in a manner to afford adequate protection against damage during shipment from supply source to destination. Package and pack shall conform to the applicable carrier rules, regulations and tariffs and may be the industry standard commercial practice. All unit, intermediate and exterior packs shall, as a minimum, be marked as follows by any means which provides legibility and durability: Federal Stock Number and/or Manufacturer's Part Number; Noun; Quantity; Purchase Order Number; Requisition Number; Mark for Bldg;

and Ship To. Exterior shipping containers shall contain a packing list or other documentation setting forth contents.

252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2011)

(a) Definitions. As used in this clause'

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD unique item identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a non-repeatable identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, or Defense Logistics Information System (DLIS) Commercial and Government Entity (CAGE) Code).

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise (e.g., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/web/Normen-ontwikkelen/ISOIEC-15459-Issuing- Agency-Codes.htm.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) All delivered items for which the Government's unit acquisition cost is $5,000 or more.

(ii) The following items for which the Government's unit acquisition cost is less than $5,000:

Contract line, subline, or exhibit line item No. Item description

(iii) Subassemblies, components, and parts embedded within delivered items as specified in Attachment Number ----

(2) The unique item identifier and the component data elements of the DoD unique item identification shall not change over the life of the item.

(3) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The encoded data elements (except issuing agency code) of the unique item identifier are marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology--Transfer Syntax for High Capacity Automatic Data Capture Media.

(4) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent; and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in the version of MIL-STD-130, Identification Marking of U.S. Military Property, cited in the contract Schedule.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires unique item identification under paragraph (c)(1)(i) or (ii) of this clause, in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of, or associated with, the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause in accordance with the data submission procedures at http://www.acq.osd.mil/dpap/pdi/uid/data_ submission_information.html.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which unique item identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s).

252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (DEC2011)

(a) The Contractor agrees to comply with the following Federal Acquisition Regulation (FAR) clause which, if checked, is included in this contract by reference to implement a provision of law applicable to acquisitions of commercial items or components.

__X__ 52.203-3, Gratuities (APR 1984) (10 U.S.C. 2207).

(b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components.

(1) ____ 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011) (Section 847 of Pub. L. 110-181).

(2) ____ 252.203-7003, Agency Office of the Inspector General (SEP 2010)(section 6101 of Pub. L. 110-252, 41 U.S.C. 3509).

(3) ____ 252.205-7000, Provision of Information to Cooperative Agreement Holders (DEC 1991) (10 U.S.C. 2416).

(4) ____ 252.219-7003, Small Business Subcontracting Plan (DoD Contracts) (SEP 2011) (15 U.S.C. 637).

(5) ____ 252.219-7004, Small Business Subcontracting Plan (Test Program) (JAN 2011) (15 U.S.C. 637 note).

(6)(i) _X__ 252.225-7001, Buy American Act and Balance of Payments Program (OCT 2011) (41 U.S.C. chapter 83, E.O. 10582).

(ii) ____ Alternate I (OCT 2011) of 252.225-7001.

(7) ____ 252.225-7008, Restriction on Acquisition of Specialty Metals (JUL 2009) (10 U.S.C. 2533b).

(8) ____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (JAN 2011) (10 U.S.C. 2533b).

(9) ____ 252.225-7012, Preference for Certain Domestic Commodities (JUN 2010) (10 U.S.C. 2533a).

(10) ____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools (JUN 2005) (10 U.S.C. 2533a).

(11) ____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings (JUN 2011) (Section 8065 of Pub.

L. 107-117 and the same restriction in subsequent DoD appropriations acts).

(12) ____ 252.225-7017, Photovoltaic Devices (DEC 2011) (Section 846 of Pub. L. 111-383).

(13)(i) ____ 252.225-7021, Trade Agreements (OCT 2011) (19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note).

(ii) ____ Alternate I (OCT 2011) of 252.225-7021.

(iii) ____ Alternate II (OCT 2011) of 252.225-7021.

(14) ____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales (APR 2003) (22 U.S.C. 2779).

(15) ____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments (APR 2003) (22 U.S.C.

2755).

(16)(i) ____ 252.225-7036, Buy American Act—Free Trade Agreements—Balance of Payments Program (OCT 2011) (41 U.S.C. chapter 83 and 19 U.S.C. 3301 note).

(ii) ____ Alternate I (OCT 2011) of 252.225-7036.

(iii) ____ Alternate II (OCT 2011) of 252.225-7036.

(iv) ____ Alternate III (OCT 2011) of 252.225-7036.

(17) ____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers (JUN 2005) (10 U.S.C. 2534(a)(3)).

(18) ____ 252.225-7039, Contractors Performing Private Security Functions (AUG 2011) (Section 862 of Pub. L.

110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383).

(19) ____ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns (SEP 2004) (Section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts).

(20) ____ 252.227-7013, Rights in Technical Data--Noncommercial Items (SEP 2011), if applicable (see 227.7103-6(a)).

(21) __X__ 252.227-7015, Technical Data—Commercial Items (DEC 2011) (10 U.S.C. 2320).

(22) ____ 252.227-7037, Validation of Restrictive Markings on Technical Data ((SEP 2011), if applicable (see 227.7102-4(c)))(10 U.S.C. 2321).

(23) _X___ 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227).

(24) ____ 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84)

(25) ____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375).

(26) ____ 252.243-7002, Requests for Equitable Adjustment (MAR 1998) (10 U.S.C. 2410).

(27) ____ 252.246-7004, Safety of Facilities, Infrastructure, and Equipment For Military Operations (OCT 2010) (Section 807 of Pub. L. 111-84).

(28) ____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417).

(29)(i) ____ 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).

(ii) ____ Alternate I (MAR 2000) of 252.247-7023.

(iii) ____ Alternate II (MAR 2000) of 252.247-7023.

(iv) ____ Alternate III (MAY 2002) of 252.247-7023.

(30) ____ 252.247-7024, Notification of Transportation of Supplies by Sea (MAR (2000) (10 U.S.C. 2631).

(31) ____ 252.247-7027, Riding Gang Member Requirements (OCT 2011) (Section 3504 of Pub. L. 110-417).

c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract:

(1) 252.225-7039, Contractors Performing Private Security Functions (AUG 2011) (Section 862 of Pub. L. 110-181, as amended by section 853 of Pub. L. 110-417 and sections 831 and 832 of Pub. L. 111-383).

2) 252.227-7013, Rights in Technical Data--Noncommercial Items (SEP 2011), if applicable (see 227.7103-6(a)).

(3) 252.227-7015, Technical Data--Commercial Items (DEC 2011), if applicable (see 227.7102-4(a)).

(4) 252.227-7037, Validation of Restrictive Markings on Technical Data (SEP 2011), if applicable (see 227.7102- 4(c)).

(5) 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (NOV 2010) (Section 1038 of Pub. L. 111-84).

(6) 252.237-7019, Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub.

L. 108-375).

(7) 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer (SEP 2010) (Section 884 of Pub. L. 110-417).

(8) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631).

(9) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631).

L2. AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQAMC- Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQAMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution.

Headquarters U.S. Army Materiel Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile number: (703) 806-8866 or 8875

Packages sent by FedEx, UPS, or other delivery service should be addressed to:

Headquarters U.S. Army Materiel Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527

The HQAMC-Level Protest Procedures are located at http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp.

If Internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQAMC-Level Protest Procedures.