Amendment_1_W911QY-17-Q-0001.docx

AMENDMENT No. 1 W911QY-17-Q-0001 DATE: 16 NOV 2016 Maintenance and Calibration Services for NSRDEC TMET Equipment This Amendment MUST be acknowledged in writing with your quotation submission.

Changes have been incorporated into solicitation W911QY-17-Q-0001 Maintenance and Calibration Services for NSRDEC TMET Equipment in order to correct equipment serial numbers and extend the solicitation close date by one week to allow offerors additional time to account for this amendment. Changes are summarized as follows:

1) Under initial untitled section, paragraph 3, sentence 1 was changed FROM:

The US Army Natick Soldier Research, Development and Engineering Center (NSRDEC) has a requirement for preventive maintenance and calibration services for Atlas LLC equipment utilized by its Textile Materials Evaluation Team (TMET).

TO:

The US Army Natick Soldier Research, Development and Engineering Center (NSRDEC) has a requirement for preventive maintenance and calibration services for Atlas LLC and Pellerin Milnor Co. equipment utilized by its Textile Materials Evaluation Team (TMET).

2) Under section DESCRIPTION OF REQUIREMENT paragraph 1, sentences 2 and 3 were changed FROM:

The Contractor's primary focus shall be to conduct preventive maintenance of Atlas equipment and certification of calibration for serial numbers # 18811, 63897, 25313, 36026QP6, 10399, 80160, QTP222 and QTP223. The Contractor shall provide the above equipment a service plan that includes monthly preventive maintenance visits with a certificate of calibration every 6 months or as needed for 18811, 63897, 25313, QTP222, QTP223 and yearly for 10399, 80160, and 36026QP6.

TO:

The Contractor shall provide all maintenance and calibration services (including replacement parts), provide all deliverables, and meet all requirements as defined in Attachment 1 – Statement of Work. The Contractor's primary focus shall be to conduct preventive maintenance of Atlas and Pellerin equipment and certification of calibration for the following equipment models (internal-generated bar code in parentheses): Atlas model numbers CI4000 (63897, serial 25313), CI35F (18811), M222QTP (QTP222), QTP223 (QTP223), LHT (10399), M228AA (80160) and Pellerin model number 36026Q6P (46580). The Contractor shall provide the above equipment a service plan that includes monthly preventive maintenance visits with a certificate of calibration every 6 months or as needed for the following equipment models (internal-generated bar code in parentheses): Atlas model numbers CI4000 (63897, 25313), CI35F (18811), M222QTP (QTP222), QTP223 (QTP223). The service shall provide assurance that the systems meet the specified requirements for weathering, fading and laundering. The Contractor shall provide yearly service for the SDL Launder-Ometer units LHT (10399), M228AA (80160), Pellerin Milnor 36026Q6P (46580) and the HRO-400 Harris-Millipore System. The Contractor shall provide parts as needed during service.

3) Under section SUBMISSION OF PROPOSALS paragraph 2, sentence 2 was changed FROM:

All proposals shall be submitted by 4:00 pm EDT on 06 December 2017.

TO:

All proposals shall be submitted by 4:00 pm EDT on 13 December 2017.

4) Changes have been made respectively to Attachment 1 – Statement of Work (SOW) in order to correct the equipment serial numbers as described above.