Sources Sought signed.doc

Sources Sought Template:

(1) Action Code :

SOURCES SOUGHT

This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation.

The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate.

(2) Date : 11/7/2024

(3) Classification Code : 3449

(4) NAICS Code: 332999

(5) NAICS Size Standard: 750 employees

(6) Contracting Office Address:

2800 Powder Mill Road Bldg. 601 Adelphi, Maryland 20783

(7) Subject: Sources Sought for one (1) Bullet Assembly Machine (BAM)

(8) Proposed Solicitation Number: W911QX25Q0021

(9) Sources Sought Closing Response Date: 11/14/2024

(10) Contact Point:

Douglas Dennard, Contract Specialist, Douglas.C.Dennard.civ@army.mil, 301-394-3371 (11)

A. Objective:

To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation.

B. The Contractor shall provide one (1) high speed, high bandwidth, low noise digital oscilloscope for data acquisition, in accordance with the below minimum salient characteristics:

1. Shall perform Machine capacity: 20 - 50 tons

2. Shall perform Ram stroke length range: 3” - 8”

3. Shall perform Ram width range: 36” - 60”

4. Shall perform Speed ranges: 50 - 300 strokes per minute

5. Shall perform Stations: Quantity 10 – 25

Potential BAMs of interest on the market include the following models and manufacturers:

1. Shall perform 3-45 High Speed Multiple Transfer Press manufactured by US Baird

2. Shall perform 4-56 High Speed Multiple Transfer Press manufactured by US Baird

3. Shall perform 220 Transfer Press manufactured by Bliss Munitions Equipment

4. BAM manufactured by Waterbury Farrel Delivery shall be made eight (8) weeks after receipt order (ARO) to Aberdeen Proving Ground (APG), MD.

C. Responses:

All interested parties should notify this office in writing, mail, fax, or e-mail within the posted date. Responses shall include:

(I) To what extent each of the specifications can be met.

(II) Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 332999 750 employees standard that accompanies NAICS code 332999. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.].

(III) Past experience/ performance through the description of completed projects.

(12) Responses to this sources sought are due no later than 11:59 AM eastern standard time 14 November 2024. Submissions should be emailed to Douglas Dennard, Contract Specialist, douglas.c.dennard.civ@army.mil.

Questions concerning this sources sought may be directed to Douglas Dennard, Contract Specialist, douglas.c.dennard.civ@army.mil. Please be advised that .zip and .exe files cannot be accepted.

(13) Place of Contract Performance:

U.S. Army Research Laboratory

6375 Johnson Road, Building 321

Aberdeen Proving Ground, MD 21005

(14) Estimated Delivery Timeframe or Period of Performance:

Eight (8) weeks After Receipt of Order (ARO).

Last updated 2/13/2017