Salient Characteristics - Amendment 0001.doc

44 KB Posted

Attached to
Total of Thirteen (13) Workbenches with Additional Specifications
Solicitation number
W911QX24Q0298
Issued by

About this file

Written by GovTribe AI ·

This document is a Salient Characteristics Amendment for a federal contract opportunity to procure a total of 13 workbenches. The Government is seeking 4 workbenches that are 72" Length x 36" Width x 36" Height and 9 workbenches that are 96" Length x 36" Width x 36" Height. All workbenches must have a black phenolic work surface, powder coated steel gray cabinetry with 3 open shelves on the left and 1 door with storage on the right, an individual cabinet and shelf weight capacity of 400 lbs, and a bench top weight capacity over 1500 lbs. Shipping and installation are included. This is a small business set-aside solicitation with a NAICS code of 337127 and a size standard of 500 employees. Award will be made to the offer most advantageous to the Government based on price, technical capabilities, and past performance. Offers are due by no later than 4-6 weeks after contract award. The contracting agency is the Department of the Army Materiel Command, Army Contracting Command Aberdeen Proving Ground.

View the file

Other files

File Type Posted
Combination Synopsis-Solicitation for Commercial Purchases (Under SAT) - Amendment 0001.docx DOCX document
Adelphi Local List of Special Instructions - Clauses and Provisions - Workbench.doc DOC document
Combination Synopsis-Solicitation for Commercial Purchases (Under SAT) - Workbench.docx DOCX document
Workbench Drawing - Dimensions and Measurements.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics Amendment 0001

Dated 9/13/2024 Revisions Highlighted in Yellow The salient characteristics mentioned below are non-negotiable due to the type of materials being utilized the size of the benches the weight bearing load and the design.

The Government’s minimum requirements are below:

· Quantity of four (4) 72’’ (inch) Length x 36’’ Width x 36’’ Height workbenches

· Quantity of nine (9) 96’’ Length x 36’’ Width x 36’’ Height workbenches Both types of required workbenches listed above shall meet the following minimum requirements:

· Black Phenolic work surface.

· Cabinetry shall be powder coated steel in gray color.

· Custom design cabinetry with three (3) open shelves on the left side and one (1) door with storage on the right side. (See Attached Drawing for required design)

· Individual cabinet and shelf weight capacity of 400 lbs.

· Bench top weight capacity over 1500 lbs.

· Shipping and installation included.

File details come from the government source that posted it. Updated .