Salient Characteristics_Amendment P0001.doc
DOC document 88 KB Posted
- Solicitation number
- W911QX24Q0183
About this file
This document is a Salient Characteristics Amendment for a Request for Quote (RFQ) issued by the Department of the Army Materiel Command, Army Contracting Command Aberdeen Proving Ground.
The RFQ is for a single girder top running overhead crane with a 32-foot span, 10-ton capacity, and various other technical specifications detailed in the salient characteristics. The crane must meet CMAA class C specifications and include a radio control system, electric wire rope hoist, and installation services. The RFQ is a small business set-aside with a delivery requirement of 12 weeks after contract award. Award will be made to the responsible small business offeror whose proposal is most advantageous to the government based on price, technical capabilities, and past performance. If no acceptable small business offers are received, the procurement will convert to full and open competition.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combination Synopsis-Solicitation for Commercial Purchases (Under SAT) (1).docx | DOCX document | |
| Salient Characteristics_Crane.doc | DOC document | |
| Evaluation Criteria (Comparative).docx | DOCX document | |
| Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation).docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics Amendment 0001
7/16/2024 Revisions Highlighted in Yellow Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): Charlie Kranz, FCDD-RLA-SA Technical Point of Contact (TPOC)
The Government requires quantity one (1) Single Girder Top Running Overhead Bridge Crane that shall include at a minimum the following characteristics:
· Meets the Crane Manufacturers Association of America (CMAA) class C specifications
· Thirty-two-foot (32') span
· Maximum complete assembly height of 16 feet (16’)
· Minimum capacity of ten (10) tons
· 460 volt/ three (3) phase motor
· Bridge transversing speed of 8-80 feet per minute for variable frequency drive controls (VFD)
· Trolley transversing speed of 6-11 feet per minute for VFD
· Low lifting speed of 2–3.3 feet per minute for VFD
· Maximum high lifting speed of 20 feet per minute
· H4 rated electric wire rope hoist certified and listed to underwriters laboratories (UL) 1340
· Hoist no-load high-speed function with a load less 25 percent of rated capacity
· Electronic overload limiter
· 30-foot (30’) hoist factory lift
· Minimum twelve-foot (12’) lift from floor to high hook
· Radio control system with minimum of one (1) transmitter and (1) receiver
· Backup traveling push button
· Freestanding runway system with eight (8) columns
· 14-foot 6-inch (14’ 6”) height under runway beam
· 60-foot conductor bar system with tandem collectors
· Installation services to include electrical, rigging, labor, travel and lift equipment rentals for installation and load testing
· On-site operator training for shop employees
· Shall be OSHA load tested per OSHA requirements 1910.179(K)(2), 1926.251(A)(4), AND 1926.251(C)(15)(II)
· Shall include freight, pickup and delivery to Aberdeen Proving Ground, MD
· The contractor shall include a one-year warranty on all equipment pieces and industry standard warranties for the hoist motor and installation labor Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .