A07_-_Provisions_and_Clauses.doc

SECTION B

ACC - APG POINT OF CONTACT

ACC - APG POINT OF CONTACT

The ACC - APG point of contact for this action is:

Contract Specialist: Christine Chase Telephone Number: (301) 394-4012 E-mail: Christine.m.chase10.civ@mail.mil Contracting Officer Name: James O’Keefe Telephone Number: (301) 394-2135 E-mail: james.g.okeefe3.civ@mail.mil

TECHNICAL POINT OF CONTACT

TECHNICAL POINT OF CONTACT

TPOC Name: TO BE INCLUDED AT TIME OF AWARD Telephone Number: (P-2) Email: (P-3) Fax: (P-4)

TYPE OF CONTRACT

TYPE OF CONTRACT (Reference: 52.216-1)

This is a Firm Fixed Price (FFP) type of contract.

E.1

GOV INSPECTION AND ACCEPTANCE

GOVERNMENT INSPECTION AND ACCEPTANCE

Government Inspection and Acceptance shall be performed at US Army Research Lab by an authorized Government Representative.

G.3

PAYMENT OFFICE (BANKCARD)

PAYMENT OFFICE (BANKCARD - INVOICES REQUIRED)

Invoice:

The Contractor shall submit their invoice, via email, to the following address:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The Contractor shall include the contract number and invoice number in the subject line of the email.

The invoice must include all of the following:

1. Name, address, and phone number of the Contractor / Vendor.

2. Invoice date. (The contractor is encouraged to date invoices as close as possible to the date of the mailing or transmission.)

3. Contract number or other authorization for supplies delivered or services performed (including order number and contract line item number.)

4. Include the Contract Line Item number with the associated description, quantity, unit price, and extended price of supplies delivered or services performed.

5. Shipping and payment terms (e.g., shipment number and date of shipment, prompt payment discount terms.) Bill of lading number and weight of shipment will be shown for shipments on Government bills of lading.

6. Name and address of Contractor to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment.)

7. Name (where applicable), title, telephone number, and mailing address of person to be notified in the event of a defective invoice.

8. Name of the cognizant COR listed in the contract.

9. Any other pertinent information or documentation required by the contract (such as evidence of shipment.)

The bankcard invoice processing office will not process partial payments on contracts for supply items where the delivery date is constant. All partial payment schedules must be obtained through the contacting officer with the appropriate clauses included in the contract.

The invoice will be forwarded by the Bankcard Invoice Processing Office personnel to the procuring activity’s Technical Representative for approval, and then will be paid by bankcard.

Receiving Report:

The Technical Point of Contact (TPOC)/Contracting Officer’s Representative (COR) listed in this contract shall submit a receiving report, via email, to the following address once all supplies/services have been delivered/performed:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The receiving report must include all of the following:

1. Date that the contract deliverables/service was fully completed

2. Contract number or other authorization for supplies delivered or services performed (including order number if applicable)

3. Name, title, telephone number, and mailing address of person submitting the receiving report

4. Name, title, telephone number, and mailing address of Government Acceptor of supplies/services (if different than number #3)

G.6

TAX EXEMPTION CERT. (ARL)

TAX EXEMPTION CERTIFICATE (ARL)

Exemption certificate number 30005004 covers exemption from Maryland retail sales and use tax.

The Federal Tax Identification number for the Army Research Laboratory is: 53-0215803.

RECEIVING ROOM - WSMR

RECEIVING ROOM REQUIREMENTS - ALTERNATE II (WSMR)

At WHITE SANDS MISSILE RANGE truck shipments are accepted Monday through Friday (except holidays) from 8:00 AM to 3:00 PM only at Shipping and Receiving, Building 1646. Suppliers shall affix packing slips to the outside of any packages delivered under this contract. Packing slips must be clearly identified and easy to retrieve enclosed packing papers. To coordinate/schedule deliveries, contact Bldg. 1646 at 575-678-6893 or 575-678-3747.

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Invoice and Receiving Report (Combo)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

D/D - Destination/Destination

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

HQ0490

Issue By DoDAAC

W911QX

Admin DoDAAC

W911QX

Inspect By DoDAAC

W813LR

Ship To Code

W813LR

Ship From Code

TO BE FILLED IN AT TIME OF AWARD

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

TO BE FILLED IN AT TIME OF AWARD

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TO BE FILLED IN AT TIME OF AWARD

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

I.1

DFARS COMMERCIAL CLAUSES

COMMERCIAL ACQUISITION PROVISIONS & CLAUSES (DFARS) (MAR 2017)

As prescribed in DFARS 212.301, the following provisions and clauses that have been selected are included in this contract by reference. Selection is defined as having a mark in the blank space to the left of the clause title. Unselected clauses are not included in this contract.

____ 52.203-3, Gratuities, as prescribed in FAR 3.202, to comply with 10 U.S.C. 2207.

____ 252.203-7005, Representation Relating to Compensation of Former DoD Officials, as prescribed in 203.171-4(b).

____ 252.204-7008 (OCT 2016), Compliance with Safeguarding Covered Defense Information Controls, as prescribed in 204.7304(a).

____ 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Information, as prescribed in 204.7304(b).

__X__ 252.204-7011, Alternative Line Item Structure, as prescribed in 204.7109(b).

____ 252.204-7013, Limitations on the Use or Disclosure of Information by Litigation Support Solicitation Offerors, as prescribed in 204.7403(a), to comply with 10 U.S.C. 129d.

____ 252.204-7014, Limitations on the Use or Disclosure of Information by Litigation Support Contractors, as prescribed in 204.7403(b), to comply with 10 U.S.C. 129d.

__X__ 252.204-7015, Disclosure of Information to Litigation Support Contractors, as prescribed in 204.7403(c), to comply with 10 U.S.C. 129d.

____ 252.205-7000, Provision of Information to Cooperative Agreement Holders, as prescribed in 205.470, to comply with 10 U.S.C. 2416.

__X__ 252.211-7003, Item Identification and Valuation, as prescribed in 211.274-6(a)(1).

____ 252.211-7006, Passive Radio Frequency Identification, as prescribed in 211.275-3.

____ 252.211-7007, Reporting of Government-Furnished Property, as prescribed in 211.274-6.

____ 252.211-7008, Use of Government-Assigned Serial Numbers, as prescribed in 211.274-6(c).

____ 252.213-7000, Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System—Statistical Reporting in Past Performance Evaluations, as prescribed in 213.106-2-70.

____ 252.215-7003, Requirements for Submission of Data Other Than Certified Cost or Pricing Data—Canadian Commercial Corporation, as prescribed at 215.408(3)(i).

____ 252.215-7004, Requirement for Submission of Data other Than Certified Cost or Pricing Data—Modifications—Canadian Commercial Corporation, as prescribed at 215.408(3)(ii).

____ 252.215-7007, Notice of Intent to Resolicit, and

____ 252.215-7008, Only One Offer, as prescribed in 215.408(3) and (4), respectively.

____ 252.219-7003 (DEVIATION 2016-O0009), Small Business Subcontracting Plan (DoD Contracts), to comply with 15 U.S.C. 637.

____ (1) Use the basic clause as prescribed in 219.708(b)(1)(A)(1).

____ (2) Use the alternate I clause as prescribed in 219.708(b)(1)(A)(2).

____ 252.219-7004, Small Business Subcontracting Plan (Test Program), as prescribed in 219.708(b)(1)(B), to comply with 15 U.S.C. 637 note.

____ 252.219-7000, Advancing Small Business Growth, as prescribed in 219.309(1), to comply with 10 U.S.C. 2419.

____ 252.222-7007Application of Labor Laws to Government Acquisitions, as prescribed in 222.1771.

__X__ 252.223-7008, Prohibition of Hexavalent Chromium, as prescribed in 223.7306.

____ 252.225-7000, Buy American—Balance of Payments Program Certificate, as prescribed in 225.1101(1)(i), to comply with 41 U.S.C. chapter 83 and Executive Order 10582 of December 17, 1954, Prescribing Uniform Procedures for Certain Determinations Under the Buy-American Act.

____ Alternate I as prescribed in 225.1101(1)(ii).

____ 252.225-7001, Buy American and Balance of Payments Program, as prescribed in 225.1101(2)(i), to comply with 41 U.S.C. chapter 83 and Executive Order 10582 of December 17, 1954, Prescribing Uniform Procedures for Certain Determinations Under the Buy-American Act.

____ Alternate I as prescribed in 225.1101(2)(ii).

____ 252.225-7006, Acquisition of the American Flag, as prescribed in 225.7002-3(c), to comply with section 8123 of the DoD Appropriations Act, 2014 (Pub. L. 113-76, division C, title VIII), and the same provision in subsequent DoD appropriations acts.

____ 252.225-7008, Restriction on Acquisition of Specialty Metals, as prescribed in 225.7003-5(a)(1), to comply with 10 U.S.C. 2533b.

____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals, as prescribed in 225.7003-5(a)(2), to comply with 10 U.S.C. 2533b.

____ 252.225-7010, Commercial Derivative Military Article—Specialty Metals Compliance Certificate, as prescribed in 225.7003-5(b), to comply with 10 U.S.C. 2533b.

____ 252.225-7012, Preference for Certain Domestic Commodities, as prescribed in 225.7002-3(a), to comply with 10 U.S.C. 2533a.

____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools, as prescribed in 225.7002-3(b), to comply with 10 U.S.C. 2533a.

____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings, as prescribed in 225.7009-5, to comply with section 8065 of Pub. L. 107-117 and the same restriction in subsequent DoD appropriations acts.

____ 252.225-7017, Photovoltaic Devices, as prescribed in 225.7017-5(a), to comply with section 846 of Pub. L. 111-383.

____ 252.225-7018, Photovoltaic Devices—Certificate, as prescribed in 225.7017-5(b), to comply with section 846 of Pub. L. 111-383.

____ 252.225-7020, Trade Agreements Certificate, as prescribed in 225.1101(5)(i), to comply with 19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note. Alternate I also implements section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate I as prescribed in 225.1101(5)(ii).

____ 252.225-7021, Trade Agreements as prescribed in 225.1101(6)(i), to comply with 19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note. Alternate I also implements section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate II as prescribed in 225.1101(6)(iii).

____ 252.225-7023, Preference for Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-5(a), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ 252.225-7024, Requirement for Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-5(b), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ 252.225-7026, Acquisition Restricted to Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-5(c), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales, as prescribed in 225.7307(a), to comply with 22 U.S.C. 2779.

____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments, as prescribed in 225.7307(b), to comply with 22 U.S.C. 2755.

____ 252.225-7029, Acquisition of Uniform Components for Afghan Military or Afghan National Police, as prescribed in 225.7703-4(d).

____ 252.225-7031, Secondary Arab Boycott of Israel, as prescribed in 225.7605, to comply with 10 U.S.C. 2410i.

____ 252.225-7035, Buy American—Free Trade Agreements—Balance of Payments Program Certificate, as prescribed in 225.1101(9)(i), to comply with 41 U.S.C. chapter 83 and 19 U.S.C. 3301 note. Alternates II, III, and V also implement section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate I as prescribed in 225.1101(9)(ii).

____ Alternate II as prescribed in 225.1101(9)(iii).

____ Alternate III as prescribed in 225.1101(9)(iv).

____ Alternate IV as prescribed in 225.1101(9)(v).

____ Alternate V as prescribed in 225.1101(9)(vi).

____ 252.225-7036, Buy American--Free (B) Trade Agreements-- Balance of Payments Program as prescribed in 225.1101(10)(i)(A), to comply with 41 U.S.C. chapter 83 and 19 U.S.C. 3301 note. Alternates II, III, and V also implement section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate I as prescribed in 225.1101(10)(i)(B).

____ Alternate II as prescribed in 225.1101(10)(i)(A).

____ Alternate III as prescribed in 225.1101(10)(i)(B).

____ Alternate IV as prescribed in 225.1101(10)(i)(C).

____ Alternate V as prescribed in 225.1101(10)(i)(C).

____ 252.225-7037, Evaluation of Offers for Air Circuit Breakers, as prescribed in 225.7006-4(a), to comply with 10 U.S.C. 2534(a)(3).

____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers, as prescribed in 225.7006-4(b), to comply with 10 U.S.C. 2534(a)(3).

____ 252.225-7039, Defense Contractors Performing Private Security Functions Outside the United States, as prescribed in 225.302-6.

____ 252.225-7040, Contractor Personnel Authorized to Accompany U.S. Armed Forces Deployed Outside the United States, as prescribed in 225.7402-5(a).

____ 252.225-7043, Antiterrorism/Force Protection Policy for Defense Contractors Outside the United States, as prescribed in 225.7403-2.

____ 252.225-7049, Prohibition on Acquisition of Commercial Satellite Services from Certain Foreign Entities—Representations, as prescribed at 225.772-5.

____ 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism, as prescribed in 225.771-5, to comply with 10 U.S.C. 2327(b).

____ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns, as prescribed in 226.104, to comply with section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts.

____ 252.227-7013, Rights in Technical Data–Noncommercial Items, as prescribed in 227.7103-6(a), to comply with 10 U.S.C. 7317 and 17 U.S.C. 1301, et. seq.

____ Alternate I as prescribed in 227.7103-6(b)(1).

____ Alternate II as prescribed in 227.7103-6(b)(2).

____ 252.227-7015, Technical Data–Commercial Items, as prescribed in 227.7102-4(a)(1), to comply with 10 U.S.C. 2320, to comply with 10 U.S.C. 7317 and 17 U.S.C. 1301, et. seq.

____ Alternate I as prescribed in 227.7102-4(a)(2), ____ 252.227-7037, Validation of Restrictive Markings on Technical Data, as prescribed in 227.7102-4(c).

____ 252.232-7009, Mandatory Payment by Government-wide Commercial Purchase Card, as prescribed in 232.1110.

____ 252.232-7010, Levies on Contract Payments, as prescribed in 232.7102.

____ 252.232-7011, Payments in Support of Emergencies and Contingency Operations, as prescribed in 232.908.

____ 252.232-7014, Notification of Payment in Local Currency (Afghanistan), as prescribed in 232.7202.

____ 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel, as prescribed in 237.173-5, to comply with section 1038 of Pub. L. 111-84.

____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees, as prescribed in 237.171-4, to comply with section 1092 of Pub. L. 108-375.

____ 252.239-7009, Representation of Use of Cloud Computing, as prescribed in 239.7604(a).

____ 252.239-7010, Cloud Computing Services, as prescribed in 239.7604(b).

____ 252.239-7017, Notice of Supply Chain Risk, as prescribed in 239.7306(a).

____ 252.239-7018, Supply Chain Risk, as prescribed in 239.7306(b), to comply with section 806 of Pub. L. 111-383, in all solicitations and contracts involving the development or delivery of any information technology, whether acquired as a service or as a supply.

____ 252.243-7002, Requests for Equitable Adjustment, as prescribed in 243.205-71, to comply with 10 U.S.C. 2410.

_X___ 252.244-7000, Subcontracts for Commercial Items, as prescribed in 244.403.

____ 252.246-7003, Notification of Potential Safety Issues, as prescribed in 246.371(a).

____ 252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations, as prescribed in 246.270-4, to comply with section 807 of Pub. L. 111-84.

____ 252.246-7008, Sources of Electronic Parts, as prescribed in 246.870-3(b), to comply with section 818(c)(3) of Pub. L. 112-81, as amended by section 817 of the National Defense Authorization Act for Fiscal Year 2015 (Pub. L. 113-291).

____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer, as prescribed in 247.207, to comply with section 884 of Pub. L. 110-417.

____ 252.247-7022, Representation of Extent of Transportation by Sea, as prescribed in 247.574(a).

__X__ 252.247-7023, Transportation of Supplies by Sea, as prescribed in 247.574(b)(1), to comply with the Cargo Preference Act of 1904 (10 U.S.C. 2631(a)).

____ Alternate I as prescribed in 247.574(b)(2).

____ Alternate II as prescribed in 247.574(b)(3).

____ 252.247-7024, Notification of Transportation of Supplies by Sea, as prescribed in 247.574(c).

____ 252.247-7025, Reflagging or Repair Work, as prescribed in 247.574(d), to comply with 10 U.S.C. 2631(b).

____ 252.247-7026, Evaluation Preference for Use of Domestic Shipyards – Applicable to Acquisition of Carriage by Vessel for DoD Cargo in the Coastwise or Noncontiguous Trade, as prescribed in 247.574(e), to comply with section 1017 of Pub. L. 109-364.

____ 252.247-7027, Riding Gang Member Requirements, as prescribed in 247.574(f), to comply with section 3504 of the National Defense Authorization Act for Fiscal Year 2009 (Pub. L. 110-417).

____ 252.247-7028, Application for U.S Government Shipping Documentation/Instructions, as prescribed in 247.207.

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS

PROGRAM CERTIFICATE—BASIC (NOV 2014)

(a) Definitions. “Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation, the offeror certifies that—

(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The offeror shall identify all end products that are not domestic end products.

(i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products:

(Line Item Number) (Country of Origin)

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products:

(Line Item Number) (Country of Origin)

(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

(Line Item Number) (Country of Origin (If known))

(End of provision)

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS

PROGRAM—BASIC (DEC 2017)

(a) Definitions. As used in this clause—

“Bahrainian end product” means an article that—

(i) Is wholly the growth, product, or manufacture of Bahrain; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(i) Means any item of supply (including construction material) that is—

(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);

(B) Sold in substantial quantities in the commercial marketplace; and

(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Domestic end product” means—

(i) An unmanufactured end product that has been mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;

“Free Trade Agreement country end product” means an article that—

(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(i) Is wholly the growth, product, or manufacture of Morocco; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(i) Is wholly the growth, product, or manufacture of Panama; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(i) Is wholly the growth, product, or manufacture of Peru; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means

(i) An unmanufactured end product mined or produced in a qualifying country; or

(ii) An end product manufactured in a qualifying country if—

(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:

(1) Components mined, produced, or manufactured in a qualifying country.

(2) Components mined, produced, or manufactured in the United States.

(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(B) The end product is a COTS item.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Basic provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor’s option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

ADELPHI CONTR. DIVISION URL

ADELPHI CONTRACTING DIVISION WEBSITE

Offeror(s) may access the Adelphi Contracting Division website at: http://www.arl.army.mil/www/default.cfm?page=509

FOREIGN NATIONALS PERFORMING

FOREIGN NATIONALS PERFORMING UNDER CONTRACT

In accordance with Title 8 U.S.C. 1324A, local Foreign Disclosure Officers (FDOs) may approve access by foreign nationals working on unclassified public domain contracts for the duration of the contract, provided the foreign nationals have appropriate work authorization documentation.

Offerors who expect to employ foreign nationals in the anticipated effort shall submit with their proposals documentary evidence verifying employment eligibility of the foreign nationals in accordance with 8 CFR 274a.12. Offerors not employing foreign nationals in performance of any resultant contract may disregard this provision.

For further information, please contact: Army Research Laboratory

Adelphi Laboratory Center

ATTN: AMSRL-CS-IO-FI

2800 Powder Mill Road

Adelphi, MD 20783-1197

PAYMENT TERMS

Payment terms of less than net thirty (30) days are unacceptable. Offers conditioned upon such terms will not be considered for award.