A02_-_Provisions_and_Clauses_Full-Text_Attachment_(Cleanroom).doc

Provisions and Clauses Full-Text Attachment

APG-ADL-B.5152.204-4409

ACC - APG POINT OF CONTACT (APR 2011)

The ACC - APG point of contact for this action is:

Contract Specialist: Jessica Camunez Telephone Number: (575) 678-8283 E-mail: jessica.r.camunez.civ@mail.mil Contracting Officer Dan Dougherty Telephone number: (301) 394-4648 E-mail: daniel.p.dougherty14.civ@mail.mil (End of clause)

APG-ADL-B.5152.204-4411

TECHNICAL POINT OF CONTACT (DEC 2002)

TPOC Name: WILL COMPLETE UPON AWARD Telephone:

Email:

Fax:

(End of clause)

APG-ADL-B.5152.204-4412 CONTRACTING OFFICER’S REPRESENTATIVE (COR) (DEC 2002)

The COR appointed to this contract is identified below. See formal letter of appointment for authorized duties/responsibilities.

COR Name: WILL COMPLETE UPON AWARD COR Telephone: (P-2)

COR Email address: (P-3)

Technical Monitor , please remove this or fill in as N/A if no technical monitor is listed.

Tech Monitor Name: (P-1)

Tech Monitor Telephone: (P-2)

Tech Monitor Email address: (P-3)

(End of clause)

APG-ADL-B.5152.216-4407

TYPE OF CONTRACT (SEP 1999)

This is a Firm Fixed Price type of contract.

(End of clause)

APG-ADL-E.5152.246-4400 GOVERNMENT INSPECTION AND ACCEPTANCE (SEP 1999)

Government Inspection and Acceptance shall be performed at (P-1) by an authorized Government Representative.

(End of clause)

APG-ADL-G.5152.232-4418 TAX EXEMPTION CERTIFICATE (SEP 1999)

Exemption certificate number 30005004 covers exemption from Maryland retail sales and use tax.

The Federal Tax Identification number for the Army Research Laboratory is: 53-0215803.

(End of clause)

APG-ADL-L.5152.215-4441

US ARMY CONTRACTING COMMAND (ACC-APG) – ADELPHI CONTRACTING DIVISION WEBSITE

Offeror(s) may access the Adelphi Contracting Division website at: http://www.arl.army.mil/www/default.cfm?page=509 (End of clause)

APG-ADL-H.5152.211-4401 RECEIVING ROOM REQUIREMENT - ALC (SEPT 1999)

At ADELPHI LABORATORY CENTER truck shipments are accepted at Building #102, Receiving Room, Monday through Friday (except holidays) from 7:30 AM to 4:00 PM only.

(End of clause)

APG-ADL-G.5152.232-4423 PAYMENT OFFICE (BANKCARD - INVOICES REQUIRED) (JUNE 2016)

Invoice:

The Contractor shall submit their invoice, via email, to the following address:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The Contractor shall include the contract number and invoice number in the subject line of the email.

The invoice must include all of the following:

1. Name, address, and phone number of the Contractor / Vendor.

2. Invoice date. (The contractor is encouraged to date invoices as close as possible to the date of the mailing or transmission.)

3. Contract number or other authorization for supplies delivered or services performed (including order number and contract line item number.)

4. Include the Contract Line Item number with the associated description, quantity, unit price, and extended price of supplies delivered or services performed.

5. Shipping and payment terms (e.g., shipment number and date of shipment, prompt payment discount terms.) Bill of lading number and weight of shipment will be shown for shipments on Government bills of lading.

6. Name and address of Contractor to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment.)

7. Name (where applicable), title, telephone number, and mailing address of person to be notified in the event of a defective invoice.

8. Name of the cognizant COR listed in the contract.

9. Any other pertinent information or documentation required by the contract (such as evidence of shipment.)

The bankcard invoice processing office will not process partial payments on contracts for supply items where the delivery date is constant. All partial payment schedules must be obtained through the contacting officer with the appropriate clauses included in the contract.

The invoice will be forwarded by the Bankcard Invoice Processing Office personnel to the procuring activity’s Technical Representative for approval, and then will be paid by bankcard.

Receiving Report:

The Technical Point of Contact (TPOC)/Contracting Officer’s Representative (COR) listed in this contract shall submit a receiving report, via email, to the following address once all supplies/services have been delivered/performed:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The receiving report must include all of the following:

1. Date that the contract deliverables/service was fully completed

2. Contract number or other authorization for supplies delivered or services performed (including order number if applicable)

3. Name, title, telephone number, and mailing address of person submitting the receiving report

4. Name, title, telephone number, and mailing address of Government Acceptor of supplies/services (if different than number #3)

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Combo

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

Aberdeen Proving Ground, MD 21005

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

WILL COMPLETE UPON AWARD

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

Template last updated 7/14/2015