A02_-_Provisions_and_Clauses_Full-Text_Attachment_(for_Combo_Synopsis-Solicitation).doc

W911QX-16-T-0164

Provisions and Clauses Full-Text Attachment (for Combo Synopsis-Solicitation)

CLAUSES INCORPORATED BY FULL TEXT

52.204-7 SYSTEM FOR AWARD MANAGEMENT (JULY 2013)

(a) Definitions. As used in this provision--

Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional System for Award Management records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same parent concern.

Registered in the System for Award Management SAM database means that--

(1) The offeror has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see Subpart 4.14) into the SAM database;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS +4” followed by the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number--

(i) Via the Internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company Physical Street Address, City, State, and Zip Code.

(iv) Company Mailing Address, City, State and Zip Code (if separate from physical).

(v) Company Telephone Number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) Offerors may obtain information on registration at https://www.acquisition.gov.

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

farsite.hill.af.mil/ (End of provision)

252.204-0009 CONTRACT-WIDE: BY FISCAL YEAR. (SEP 2009)

The payment office shall make payment using the oldest fiscal year appropriations first, exhausting all funds in the previous fiscal year before disbursing from the next fiscal year. In the event there is more than one ACRN associated with the same fiscal year, the payment amount shall be disbursed from each ACRN within a fiscal year in the same proportion as the amount of funding obligated for each ACRN within the fiscal year.

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Invoice and Receiving (Combo) (Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and

“Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

Destination/Destination (Contracting Officer: Insert inspection and acceptance locations or “Not applicable”.)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

HQ0490

Issue By DoDAAC

W911QX

Admin DoDAAC

W911QX

Inspect By DoDAAC

W813LT

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

W813LT

Service Acceptor (DoDAAC)

W813LT

Accept at Other DoDAAC

Not Applicable

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Contracting Officer: James O’Keefe; james.g.okeefe3.civ@mail.mil Contract Specialist: Christopher Moy; christopher.r.moy.civ@mail.mil Administrative Contracting Officer: James O’Keefe; james.g.okeefe3.civ@mail.mil Inspector: TBD Acceptor: TBD Receiving Office/Ship to POC: TBD

(g) WAWF point of contact: Michael Adams; michael.j.adams214.civ@mail.mil

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

N/A

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

DELIVERY INFORMATION

CLAUSES INCORPORATED BY FULL TEXT

APG-ADL-B.5152.204-4409

ACC - APG POINT OF CONTACT (APR 2011)

The ACC - APG point of contact for this action is:

Contract Specialist (Christopher R. Moy)

Telephone Number: (301-394-2021 E-mail: (Christopher.r.moy.civ@mai.mil)

Contracting Officer (James G. O'Keefe)

Telephone Number: (301-394-2135)

E-mail: (james.g.okeefe3@mail.mil)

(End of clause)

APG-ADL-B.5152.216-4407

TYPE OF CONTRACT (SEP 1999)

This is a (Firm Fixed Price) type of contract.

(End of clause)

APG-ADL-E.5152.246-4400 GOVERNMENT INSPECTION AND ACCEPTANCE (SEP 1999)

Government Inspection and Acceptance shall be performed in two (2) stages at the Army Research Laboratory (ARL) at Aberdeen Proving Ground (APG). Delivery shall be to ARL/APG, Shipping and Receiving, Building 321 Colleran Road, Aberdeen, MD 21005 USA. Government Inspection and acceptance shall be performed upon delivery by an authorized Government Representative. Installation, validation, and commissioning of the replacement vacuum system shall be performed at ARL/APG, Rodman Materials Research Laboratory, Building 4600, Aberdeen, MD 21005 USA. Government Inspection and Acceptance shall be performed again upon completion of the installation/validation/commissioning of the replacement vacuum system by an authorized Government Representative.

(End of clause)

APG-ADL-G.5152.232-4418 TAX EXEMPTION CERTIFICATE (SEP 1999)

Exemption certificate number 30005004 covers exemption from Maryland retail sales and use tax.

The Federal Tax Identification number for the Army Research Laboratory is: 53-0215803.

(End of clause)

APG-ADL-G.5152.232-4423 PAYMENT OFFICE (BANKCARD - INVOICES REQUIRED) (SEP 2010)

The Contractor shall forward submit their invoice, via email, to the following address:

usarmy.adelphi.arl.list.bankcard-invoices@mail.mil

The Contractor shall include the contract number and invoice number in the subject line of the email.

The invoice must include all of the following:

1. Name, address, and phone number of the Contractor / Vendor.

2. Invoice date. (The contractor is encouraged to date invoices as close as possible to the date of the mailing or transmission.)

3. Contract number or other authorization for supplies delivered or services performed (including order number and contract line item number.)

4. Include the Contract Line Item number with the associated description, quantity, unit price, and extended price of supplies delivered or services performed.

5. Shipping and payment terms (e.g., shipment number and date of shipment, prompt payment discount terms.) Bill of lading number and weight of shipment will be shown for shipments on Government bills of lading.

6. Name and address of Contractor to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment.)

7. Name (where applicable), title, telephone number, and mailing address of person to be notified in the event of a defective invoice.

8. Name of the cognizant COR listed in the contract.

9. Any other pertinent information or documentation required by the contract (such as evidence of shipment.)

The bankcard invoice processing office will not process partial payments on contracts for supply items where the delivery date is constant. All partial payment schedules must be obtained through the contacting officer with the appropriate clauses included in the contract.

The invoice will be forwarded by the Bankcard Invoice Processing Office personnel to the procuring activity’s Technical Representative for approval, and then will be paid by bankcard.

(End of clause)

APG-ADL-H.5152.211-4401 ALT RECEIVING ROOM REQUIREMENTS - APG ALTERNATE I (JAN 2003)

At ABERDEEN PROVING GROUNDS truck shipments are accepted Monday through Friday (except holidays) from 8:00 AM to 3:30 PM only at Shipping and Receiving, Building 321 Colleran Road, APG, MD

21005. Suppliers shall affix packing slips to the outside of any packages delivered under this contract. Packing slips must be clearly identified and easy to retrieve enclosed packing papers. Acceptance, installation, validation, and commissioning of the replacement vacuum system shall be performed at ARL/APG, Rodman Materials Research Laboratory, Building 4600, Aberdeen, MD 21005 USA. To coordinate/schedule deliveries, contact Bldg. 321 at 410-278-4406.

(End of clause)

APG-ADL-L.5152.203-4440

AMC-LEVEL PROTEST PROGRAM (JUL 2011)

If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103(e). Send protests (other than protests to the contracting officer) to:

Headquarters U.S. Army Materiel Command

Office of Command Counsel

4400 Martin Road

Room: A6SE040.001

Redstone Arsenal, AL 35898-5000

Fax: (256) 450-8840

The AMC-level protest procedures are found at:

http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp

If Internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures.

(End of provision)

APG-ADL-L.5152.215-4441

US ARMY CONTRACTING COMMAND (ACC-APG) – ADELPHI CONTRACTING DIVISION WEBSITE

Offeror(s) may access the Adelphi Contracting Division website at: http://www.arl.army.mil/www/default.cfm?page=509