SMCWV FORM 1155.pdf
PDF 321 KB Posted
- Solicitation number
- W911PT22B0001
About this file
This document contains a federal solicitation and related opportunity for tube forgings. The solicitation requests offers for 225 each tube forging per drawing number 12901305 Revision B, with an option for 100 additional forgings. Delivery of the first article is required within 150 days of contract award, with production quantities to begin 150 days after award or first article approval at a minimum rate of 25 forgings per month until complete. The solicitation will be issued electronically on the SAM website and through Army Contracting Command ACC-WVA. To be eligible for award, the successful offeror's SAM registration must be active and include representations and certifications. The solicitation document contains militarily critical technical data, so only certified businesses with a valid requirement and an active DD2345 may obtain it. The agency is the Department of the Army Materiel Command Contracting Command Detroit Arsenal.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QAP 12901305 Rev C.pdf | ||
| 8767017.pdf | ||
| DWG8769067-P.pdf | ||
| 010731-QAP-APPX-BL.pdf | ||
| 12521199 Rev A.pdf | ||
| released W911PT-22-B-0001 - 81mm tube forgings.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
*SEE NOTES BELOW FOR NUMBERED FIELDS
1. RECORD OF TREATMENT AND TEST:
2. CONTRACTOR: CONTRACT NO: DATE:
SPECIFICATION NO: DRAWING NO: DATE SHIPPED:
CHEMICAL ANALYSIS MADE BY: METHOD/SPEC: MACROETCH: SATISFACTORY
C
Mn P S Si Ni Cr Mo V MACROETCH: NOT TAKEN
OBTAINED DATE CAST:
REQUIRED DATE FORGED:
HEAT NO: TYPE OF INGOT: INGOT DIA: INGOT LENGTH:
INGOT NO: INGOT WEIGHT: INGOTS/HEAT:
3. HEAT TREATMENT: HEAT TREATMENT PERFORMED BY:
MECHANICAL TESTS MADE BY:
SPECIMEN LOCATIONS YS TS RA, % 4. ELONG, % 5. FRACTURE HARDNESS CHARPY, FT-LBS/JOULES
% OFFSET= TEMP =
6. VALUE DIFFERENCE
REQUIREMENT
REMARKS:
NOTES: 1. ENTER THE NUMBERS OF ALL FORGINGS OR CASTINGS REPRESENTED BY THESE TESTS, MARKING WITH AN ASTERISK (*) THOSE FROM WHICH SPECIMENS ARE TAKEN. 2. ENTER FIRM NAME AND ADDRESS. 3. USE REMARKS
BLOCK. 4. INDICATE GAGE LENGTH AND WHETHER 4D OR 5D IN REMARKS BLOCK. 5. C=CUPPED; CR=CRYSTALLINE; I=IRREGULAR; N=NONMETALLIC; P=PITTED; L=LAMINATED; W=WOODY; LC=LUSTROUS CAVITIES.
6. WHEN REQUIRED, INDICATE + OR – VALUE. ALSO INDICATE ADJUSTED MECHANICAL PROPERTIES USING: ADJ VALUE = PROD VALUE + VALUE DIFFERENCE.
GOVT INSPECTOR (TYPED NAME & SIGNATURE) ORGANIZATION DATE: SIGNATURE AND TITLE OF CERTIFYING OFFICIAL: DATE:
SMCWV FORM 1155 1 AUGUST 1990 PREVIOUS EDITIONS OBSOLETE
File details come from the government source that posted it. Updated .