TECHNICAL DATA SHEET for PN 759-364-025 Conduit Assy.pdf
PDF 172 KB Posted
- Attached to
- Conduit Assembly
- Solicitation number
- W911N2-27-Q-A012
About this file
Technical Data Sheet Summary
This is a Technical Data Sheet and Salient Characteristics document for a military-specification conduit assembly. The document specifies the Conduit Assembly, Electrical, Flexible, Shielded (Part Number 759-364-025, CAGE Code 06324) manufactured by Glenair, Inc., which is designed for the MIM-104 Patriot Missile Defense System, specifically for the Radar Set AN/MPQ-53 and AN/MPQ-65. The assembly is classified as an Unclassified Commercial Off-The-Shelf Defense Item and falls under Federal Supply Classes 5975 (Electrical Hardware and Supplies) and 5995 (Cable, Cord, and Wire Assemblies). The assembly is governed by baseline specification MIL-PRF-24758A and provides ruggedized mechanical, environmental, and electromagnetic interference (EMI/RFI) shielding for critical signal and low-voltage power distribution within the phased-array radar shelter and antenna mast grouping.
The assembly features a helically convoluted polytetrafluoroethylene (PTFE) or reinforced fluoropolymer inner core with tin-coated or nickel-plated copper braided metallic shielding for EMI/EMP protection, and a heavy-duty, low-smoke, zero-halogen (LSZH) elastomeric outer jacket providing environmental protection. The assembly is fluid-resistant to aircraft fuels (JP-8), synthetic turbine oils (MIL-PRF-23699), hydraulic fluids (MIL-PRF-83282), de-icing chemicals, and salt spray, with ozone, sunlight, and UV radiation resistance per ASTM G155. End "A" features a military backshell with MIL-DTL-38999 Series III mating compatibility, while End "B" is a transition coupling or bulkhead flange adapter. Both fittings use 316L stainless steel or aluminum alloy hardware with electroless nickel or olive drab cadmium finish and dual elastomeric O-ring compression glands for sealing. The assembly operates continuously from specified temperature ranges with transient capability to higher temperatures, maintains IP67/IP68 moisture protection submersible to specified water depth, withstands random vibration per MIL-STD-810 Method 514 (Category 24), mechanical shock per Method 516, and salt fog corrosion resistance per ASTM B117 and MIL-STD-810 Method 509. Quality assurance requires visual and dimensional inspection, hydrostatic/immersion pressure testing with no fluid ingress, electrical ground continuity verification, and minimum pull-off tensile strength testing. Procurement specifies Glenair, Inc. as the approved source with Military A/B packaging per MIL-STD-2073-1 and permanent marking via heat-shrink sleeves or laser engraving with manufacturer CAGE, part number, lot/date code (YYWW), and defense system cross-reference.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis_Solicitation_W911N2-27-Q-A012.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL DATA SHEET / SALIENT
CHARACTERISTICS
DOCUMENT CLASSIFICATION: Unclassified / Commercial Off-The-Shelf Defense Item ITEM IDENTIFICATION: Conduit Assembly, Flexible, Shielded
PART NUMBER (P/N): 759-364-025
CAGE CODE: 06324 (Glenair, Inc.)
MAJOR WEAPONS SYSTEM APPLICATION: MIM-104 Patriot Missile Defense System (Radar Set AN/MPQ-53 / AN/MPQ-65)
1. Item Identification & General Description
Field Data Requirement / Specification Nomenclature Conduit Assembly, Electrical, Flexible, Shielded Manufacturer / CAGE Glenair, Inc. (CAGE: 06324)
Base Part Series Glenair 759 Series (Point-to-Point Factory-Terminated Military Conduit)
Dash Suffix Designation -025 (Specifies an overall finished assembly length of ) Governing Baseline Designed to conform to or exceed MIL-PRF-24758A Federal Supply Class
(FSC)
5975 (Electrical Hardware and Supplies) / 5995 (Cable, Cord, and Wire Assemblies)
1.1 Scope & Functional Purpose
The 759-364-025 conduit assembly provides ruggedized mechanical, environmental, and electromagnetic interference (EMI/RFI) shielding for critical signal and low-voltage power distribution within the phased-array radar shelter and antenna mast grouping of the Patriot missile system. It is engineered to withstand continuous outdoor exposure, chemical immersion, extreme thermal gradients, and intense electromagnetic radiation environments.
2. Salient Physical & Mechanical Characteristics
2.1 Construction & Materials
• Inner Core Tube:
o Material: Helically convoluted polytetrafluoroethylene (PTFE) or reinforced fluoropolymer core.
o Internal Diameter (ID): Smooth internal transition to avoid chafe damage to conductor insulation during insertion and vibration.
o Crush Resistance: Minimum per MIL-PRF-24758 testing protocols.
• Shielding Layer (EMI/EMP Protection):
o Primary Shield: Braided metallic shield consisting of tin-coated copper or nickel-plated copper wire (minimum optical coverage).
o Shielding Effectiveness: Capable of attenuation across frequency spectrum to .
• Outer Jacketing (Environmental Protection):
o Material: Heavy-duty, low-smoke, zero-halogen (LSZH) elastomeric compound (Glenair Duralectric or equivalent vulcanized neoprene).
o Fluid Resistance: Impervious to aircraft fuels (JP-8), synthetic turbine lube oils (MIL-PRF-23699), hydraulic fluids (MIL-PRF-83282), de-icing chemicals, and salt spray.
o Weatherability: Ozone-, sunlight-, and UV-radiation resistant per ASTM G155.
2.2 Dimensional Parameters
• Overall Assembly Length (): ().
• Length Tolerance: () measured from reference datum surfaces of end fittings.
• Minimum Dynamic Bend Radius: outside diameter (OD).
• Minimum Static Bend Radius: outside diameter (OD).
3. Termination & End Fittings
Parameter End "A" Fitting End "B" Fitting
Fitting Type Military Backshell / Direct Interface Adapter
Transition Coupling / Bulkhead Flange Adapter
Mating Compatibility
Standard MIL-DTL-38999 Series III / Glenair Mighty Mouse
Bulkhead / Interface Panel Feedthrough
Angle Orientation Straight () Straight () or elbow (per TDP dash)
Hardware Material 316L Stainless Steel or Aluminum Alloy 316L Stainless Steel or
Aluminum Alloy
Finish / Plating Electroless Nickel or Olive Drab Cadmium
Electroless Nickel or Olive Drab Cadmium
Sealing System Dual elastomeric O-ring compression gland
Dual elastomeric O-ring compression gland
4. Environmental & Operational Performance Limits
• Operating Temperature Range: to (continuous rating); transient capability up to .
• Moisture / Ingress Protection: IP67 / IP68 equivalent; submersible up to () water depth when properly torqued.
• Vibration Resistance: Withstands random vibration spectrum per MIL-STD-810, Method 514, Category 24 (tactical ground equipment).
• Mechanical Shock: MIL-STD-810, Method 516 (, half-sine pulse).
• Salt Atmosphere: Minimum salt fog corrosion resistance per ASTM B117 / MIL-STD-
810 Method 509.
5. Quality Assurance, Inspection & Verification
5.1 Verification Test Matrix
All production lots must undergo and pass the following quality inspections prior to government acceptance:
1. Visual & Dimensional Inspection:
o Verification of overall length ().
o Inspection for surface blisters, cracks, cuts in jacket, or thread burrs on fittings.
2. Hydrostatic / Immersion Pressure Test:
o Conduit assemblies must demonstrate no fluid ingress when subjected to a minimum internal/external pneumatic pressure proof test ( for ).
3. Electrical Ground Continuity:
o Direct-current resistance across end-to-end fitting interface must not exceed () to ensure valid EMI shield grounding.
4. Pull-Off Tensile Strength:
o Minimum fitting-to-conduit pull-off tensile retention of without physical separation or jacket displacement.
6. Procurement & Packaging Requirements
• Approved Source of Supply:
o OEM: Glenair, Inc. (CAGE 06324) o Part Number: 759-364-025 o
• Marking & Identification:
o Assembly shall be permanently marked using heat-shrink marker sleeves or laser engraving with:
Manufacturer CAGE: 06324 Part Number: 759-364-025 Lot/Date Code: YYWW Defense System/Drawing Cross-Reference (if specified in delivery order)
• Packaging & Preservation:
o Packaging level Military A/B per MIL-STD-2073-1. End fittings must be protected with vinyl or polyethylene protective caps to prevent thread damage during transit.
| TECHNICAL DATA SHEET / SALIENT CHARACTERISTICS |
| 1. Item Identification & General Description |
| 1.1 Scope & Functional Purpose |
| 2. Salient Physical & Mechanical Characteristics |
| 2.1 Construction & Materials |
| 2.2 Dimensional Parameters |
| 3. Termination & End Fittings |
| 4. Environmental & Operational Performance Limits |
| 5. Quality Assurance, Inspection & Verification |
| 5.1 Verification Test Matrix |
6. Procurement & Packaging Requirements
File details come from the government source that posted it. Updated .