Attachment 1 PWS for Tactical Weapons Lights.pdf
PDF 71 KB Posted
- Attached to
- Tactical Weapons Lights Federal contract opportunity
- Solicitation number
- W911KF-24-Q-0051
About this file
This document is a Performance Work Statement (PWS) for a one-time procurement of 200 tactical weapons light systems for the Department of Emergency Services (Law Enforcement Division) at Anniston Army Depot. The lights must be compatible with M-17/M-18 pistols and M-4 rifles, with 14 of the 200 lights required to be compatible with pressure switches. Key requirements include that the lights must be mountable on picatinny rails, provide a concentrated 1000 lumen beam, have a quick attachment/detachment mechanism, a scratch-resistant lens, and additional features such as strobe capability and a 50,000-hour LED lifetime. The contractor is responsible for delivering all parts and equipment to the Anniston Army Depot. The PWS is associated with Solicitation W911KF-24-Q-0051 issued by the Department of the Army Materiel Command Contracting Command Detroit Arsenal.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 01.pdf | ||
| Attachment 2 Evidence of Authority.pdf | ||
| W911KF-24-Q-0051 Released.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Performance Work Statement for Tactical Weapons Light System
1.0 Scope: This specification establishes a requirement to purchase lights and light kits for the
Department of Emergency Services (Law Enforcement Division), at Anniston Army Depot. This
PWS is designed for the one-time purchase of these lights and light systems.
2.0 Lights/Light Systems
The contractor shall provide 200 light systems that will be used on both M-17/M-18 pistols and M-4 rifles. 14 of the 200 must be compatible and function with pressure switches. All units shall meet the following requirements:
2.1 Systems must be mountable on picatinny rail systems and be ideally suited for ambidextrous persons.
2.2 Systems must be LED and capable of providing a concentrated 1000 lumen beam of light with a wide illumination pattern for clearing large areas and dark rooms.
2.3 Systems must provide for a safe, quick, and efficient attachment and detachment means.
2.4 Lens must be scratch resistant and durable. Must be black in color.
2.5 Additional Salient Features
• Length min: 3.39" max: 4.2”
• Width: min: 1.47"
• Height: min: 1.44"
• Weight: light
• Output: 1000 lumens
• Intensity: 15,000 candelas
• C4 LED light source with a 50,000-hour lifetime
• Minimum 200-meter beam distance
• Run time: 1.75 hours.
• Power Source: "CR123A" lithium batteries
• Standard ambidextrous on/off switch
• Unbreakable, gasket-sealed, scratch resistant polycarbonate lens.
• Strobe capable.
• Rail grip clamp system built for picatinny rails.
3.0 Site Delivery
Contractor shall be responsible for shipment of all needed parts and equipment required each light/light system to Anniston Army Depot 7 Frankford Avenue Anniston, AL 36201
Bldg. 53. ATTN: CPT Locke.
4.0 Scope Changes
The Contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.
File details come from the government source that posted it. Updated .