Attachment_1_Statement_of_Work.pdf

STATEMENT OF WORK

FOR

Electric Motors Rewind, Repair, Test, and Replace

1.0 Scope:

This statement of work establishes a requirement for maintenance support to rewind, repair, test, and replace electric motors located at Anniston Army Depot, Anniston, Alabama. The contract period shall be for a one-year base period beginning with award of this contract, plus four (4) option years.

2.0 Maintenance Requirements:

2.1 Maintenance:

The Contractor shall provide the Government maintenance support for the Electric Motors located at Anniston Army Depot, Anniston, Alabama which includes but is not limited to:

A. Repair, rewind, test, and replace motors. This cost will not exceed half the cost of a new motor. If the motor cannot be repaired or exceed half the cost of a new motor the Contractor will call Contracting Officer Representative (COR) at 256-741-5223 for prior authorization.

B. Contractor shall stamp repaired or replaced motors with date of repair and warranty expiration date.

C. Contractor shall provide an invoice with each motor returned with list of repair parts and labor rates. Contractor further agrees that repair parts and material will be billed at cost. Motor’s that cannot be repaired will be returned back to the government.

D. Contractor shall pick up motors within 24 hours of contact by COR and returned repaired within 72 hours. Emergency repairs that are picked up on the same day as notification shall be returned repaired within 48 hours.

E. If any part is out sourced by the Contractor all requirements listed in this Statement of Work (SOW) applies.

3.0 Documentation of Malfunctions and Service Calls:

The Contractor shall furnish to the Government a service document which will be used to report the date and time of notification, along with a brief description of each malfunction reported to him. The Contractor shall furnish to the Government one copy of this report form upon completion of any corrective or preventive action taken by the Contractor. The report form shall include as a minimum the following:

A. Date and Time of Notification

B. Date and Time of Arrival

C. Time Spent for Repair

D. Description of Malfunction and/or Maintenance Performed

E. Description of Parts Replaced

4.0 Normal Period of Support (NPS):

The normal period of maintenance support shall be Monday through Thursday 0700-1630 hours and 0700-1530 hours every other Friday. Maintenance support shall be made available to the Government during this period at a fixed hourly rate.

5.0 Support Outside Normal Period of Support (SONPS):

On-call emergency maintenance support shall be made available to the Government outside the Normal Period of Support (NPS) (including Federal holidays and weekends) at a fixed hourly rate (or rates), as specified in this contract.

6.0 Contractor’s Point of Contact:

The Contractor shall provide the Contracting Officer with a point of contact and a telephone number for the Government to report service calls, and shall make arrangements for qualified service personnel (e.g. qualified technician) to receive notification and respond to the Government within twenty-four hours. Telephone recording devices and/or voice-mail systems are acceptable. The Contracting Officer shall supply the Contractor with the name and telephone number of his/her designated technical representative. The COR is authorized to request maintenance support services.

7.0 Contractor Service Personnel:

The Contractor shall provide trained personnel, with the necessary expertise to perform all required technical support and emergency maintenance support on the electric motors. Work shall be performed in accordance with best commercial practices without unnecessary delays or interference with Government missions or functions.

8.0 Response Remedies:

If, twenty-four (24) hours after the Contracting Officer or COR notifies the Contractor, the Contracting Officer determines that the contractor is not making continuous progress toward remedying any reported equipment malfunction, the Government shall reserve the right to secure the services of other commercial or Government qualified technicians to repair, replace, or otherwise correct the reported malfunction of the equipment at the Contractor’s expense.

9.0 Replacement Parts/Materials:

Replacement parts shall be supplied by the Contractor on a cost reimbursement basis as specified in this contract. Only new standard parts or parts refurbished equivalent to new, shall be used in effecting repairs. A discount on all parts and all upgrades shall be offered to the Government as part of this emergency on-call maintenance contract.

10.0 Warranty of Parts/Materials:

Parts/materials replaced under this contract will be subject to the standard commercial warranty applied to those parts or materials. All rebuilt 3 phase motors shall come with a one year warranty. And all rebuilt single phase motors shall have a 90 day warranty.

11.0 Surveillance/Communication:

All technical surveillance of on-call, on-site services will be performed by the Contracting Officer’s Representative. After correction of each malfunction, the Contractor shall notify the contract administrator named in this contract. Communication of all technical matters pertaining to this contract shall be in writing directly between the Contractor and the Contracting Officer, Anniston Army Depot, ATTN: AMSTA-AN-CTCS, 7 Frankford Avenue, Anniston, Alabama 36201-4199, with a copy furnished to the COR.

12.0 Contractor Responsibilities:

12.1 The Contractor shall provide all parts, tools, labor, documentation and materials necessary to perform the maintenance support required by the terms of this contract.

12.2 The offered shall include the following in his response to this request for proposals:

A. Hourly labor rate to be charged during the Service Outside Normal Period of Support (SONPS) for the base year and each one-year option.

1. Hourly Labor Rate during the Service Outside Normal Period of Support

(SONPS):

a. AC Motors between 2HP – 25HP Dollar ($) per hour

b. AC Motors between 26HP – 200HP $ per hour

c. AC Motors greater than 200HP $ per hour

B. Hourly labor rate to be charged during the Normal Period of Support (NPS) for the base year and each one-year option.

1. Hourly Labor Rate during the Normal Period of Support (NPS):

a. AC Motors between 2Horsepower (HP) – 25HP $ per hour

b. AC Motors between 26HP – 200HP $ per hour

c. AC Motors greater than 200HP $ per hour

13.0 Contractor Manpower Reporting:

A. The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor will report ALL Contractor manpower (including subcontractor labor hours) required for performance of services provided under this contract via secure data collection site. The Contractor is required to completely fill in all the required data fields in the format using the following web address: https://www.ecmra.mil/Default.sapx. The required information includes the following:

(1) Contracting Office, Contracting Officer, COR;

(2) Contract number, including task and delivery order number;

(3) Beginning and ending dates covered by reporting period;

(4) Contractor name, address, phone number, e-mail address, identity of Contractor employee entering data;

(5) Direct labor hours (including sub-contractors);

(6) Direct labor dollars paid this reporting period (including sub- contractors);

(7) Total payments (including sub-contractors);

(8) Predominant Federal Service Code (FSC) reflecting services provided by Contractor (and separate predominant FSC for each sub-contractor if different);

(9) Data collection cost;

(10) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Army Requiring Activity is responsible for providing the Contractor with its UIC for the purposes of reporting this information);

(11) Locations where Contractor and sub-contractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas location, using standardized nomenclature provided on website);

(12) Presence of deployment or contingency contract language; and

(13) Number of Contractor, and sub-contractor employees deployed in theater this reporting period (by country).

B. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September30.

While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2013. Contractors may direct questions to the help desk at: https://www.ecmra.mil/Default.aspx.

14.0 Access and General Protection/Security Policy and Procedures:

A. This standard language is for Contractor employees with an area of performance within an Army-controlled installation, facility, or area. The Contractor and all associated subcontractors employees shall provide all information required for background checks to meet installation access requirements to be accomplished by the installation Provost Marshal Office, Director of Emergency Services, or Security office. The Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA, and/or local policy. In addition to the changes otherwise authorized by the change clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in Contractor security matters or processes.

B. For Contractors that do not require a Common Access Card (CAC), but require access to a DOD facility or installation. Contractor and all associated subcontractor employees shall comply with adjudication standards and procedures using the National Crime Information Center interstate identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

C. If necessary, Contractor shall acquire and return all issued U.S. Government Common Access Cards, installation badges, and/or access passes.