Drawing133-144_pages.pdf

GENERAL NOTES

UFC 1-200-01, REVISION 8/01/2015, GENERAL BUILDING REQUIREMENTS

NFPA 30, 2015 EDITION, FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE

NFPA 30B, 2015 EDITION, MANUFACTURE AND STORAGE OF AEROSOL

NFPA 72, 2016 EDITION, NATIONAL FIRE ALARM AND SIGNALING CODE

1. THIS IS AN EXISTING STRUCTURE. THE INSTALLING CONTRACTOR SHALL BE FAMILIAR WITH

THIS STRUCTURE PRIOR TO BID AND WORK.

2. PROVIDE COMPLETE WET PIPE SPRINKLER SYSTEM THROUGHOUT THE FACILITY AS

NOTED ON PLANS. DESIGN AND INSTALL IN ACCORDANCE WITH UFC 3-600-01 8 AUGUST

2016 EDITION, CHANGE 2, 25 MARCH 2018, NFPA 13 2016 EDITION, NFPA 24 2014 EDITION, BID DRAWINGS, AND SPECIFICATIONS.

3. REFER TO SPECIFICATIONS FOR MATERIALS AND METHODS OF CONSTRUCTION.

4. REFER TO ARCHITECTURAL DRAWINGS FOR ROOM FINISH SCHEDULE AND ROOM USE.

REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR THE LOCATION OF ALL

CEILING-MOUNTED DEVICES. FIELD VERIFY AND COORDINATE THE LOCATIONS OF ALL

SYSTEM COMPONENTS INCLUDING PIPING, ALARMS, DRAINS, TEST POINTS, ETC. WITH

ARCHITECTURAL, STRUCTURAL, MECHANICAL, AND ELECTRICAL EQUIPMENT WITHIN THE

BUILDING.

5. PROVIDE SPRINKLERS BELOW ALL OBSTRUCTIONS OR GROUPS OF OBSTRUCTIONS WIDER

THAN 48".

6. PROVIDE SLEEVES AND WALL PLATES FOR ALL PENETRATIONS (EXCEPT WHERE NOTED)

THROUGH WALLS OR FLOORS THAT MIGHT INCLUDE DRILLING THROUGH CONCRETE,

METAL, SHEETROCK, OR OTHER MATERIALS. FIELD VERIFY APPROXIMATE WALL AND

FLOOR PENETRATIONS SHOWN ON THE PLANS. SEAL ALL PENETRATIONS IN RATED

SEPARATION TO MEET THE MINIMUM FIRE RATING OF THE WALL OR FLOOR.

7. THE TOTAL CALCULATED WATER DEMAND FOR EACH OCCUPANCY IS EQUAL TO THE SUM

OF THE SPRINKLER SYSTEM DEMAND PLUS THE COMBINED HOSE STREAM ALLOWANCE

REQUIRED PER UFC 3-600-01.

8 COORDINATE THE LOCATIONS OF RISERS, DRAINS, TEST CONNECTIONS, AND OTHER

SPRINKLER SYSTEM COMPONENTS WITH ARCHITECTURAL, STRUCTURAL,

MECHANICAL AND ELECTRICAL COMPONENTS OF THE BUILDING AND AS SHOWN ON THE

PLANS. THE DEDICATED FIRE LINES ARE EXISTING. EXISTING RISERS WILL BE REPLACED.

9. THE SPRINKLER SYSTEMS SHALL BE HYDRAULICALLY CALCULATED IN ACCORDANCE WITH

NFPA 13, AND USING UFC 3-600-01 DENSITY AND SPACING REQUIREMENTS. NO AREA

REDUCTIONS WILL BE ALLOWED.

10. PROVIDE RECESSED PENDENT SPRINKLERS WITH CHROME ESCUTCHEONS FOR AREAS

WITH SUSPENDED CEILINGS. PROVIDE CHROME PENDENT SPRINKLERS WITH CHROME

TWO-PIECE ESCUTCHEONS IN AREAS WITH SUSPENDED CEILINGS AND

SURFACE-MOUNTED LIGHT FIXTURES. CENTER SPRINKLERS IN ONE DIRECTION FOR

CEILING TILE, AND ALIGN SPRINKLERS WHERE POSSIBLE WITH LIGHT FIXTURES IN GYPSUM

BOARD CEILINGS. PROVIDE QUICK RESPONSE BRASS UPRIGHT SPRINKLERS IN AREAS

EXPOSED TO STRUCTURE WHERE PERMITTED.

11. PROVIDE THREADED, GROOVED, OR WELDED BLACK SCHEDULE 40 FOR ALL WET PIPE

SYSTEM. INSTALL GALVANIZED SCHEDULE 40 PIPE WHERE PIPE IS EXPOSED TO THE

OUTSIDE ELEMENTS SUCH AS DRAIN LINES.

12. PROVIDE AUXILIARY DRAINAGE FOR ALL TRAPPED SECTIONS OF PIPE.

13. PROVIDE ACCESS DOORS AND SIGNAGE WHERE ACCESS IS REQUIRED TO CONCEALED

SPRINKLER EQUIPMENT, VALVES, AND CONTROLS LOCATED IN WALLS OR ABOVE CEILINGS

AS APPROVED BY THE OWNER AND FIRE DEPARTMENT.

14. THE CENTERLINE OF THE SPRINKLER PIPE SHALL BE INSTALLED AS NOTED ABOVE THE

CEILING IN ALL AREAS WITH A CEILING, AND 12" BELOW THE TOP OF STEEL/ROOF DECK IN

EXPOSED AREAS OR AS NOTED ON PLAN. FIRE SPRINKLER CONTRACTOR SHALL BE

RESPONSIBLE FOR VERIFYING ALL ELEVATIONS AND SHALL COORDINATE WITH ALL TOP

AND BOTTOM OF STEEL ELEVATIONS, DUCTWORK, CABLE TRAYS, ETC. PRIOR TO

FABRICATION AND INSTALLATION.

15. SPRINKLERS NEAR UNIT HEATERS AND OTHER HEAT SOURCES SHALL BE A HIGH

TEMPERATURE AS DIRECTED BY UFC-3-600-01 AND NFPA 13.

16. THE FIRE PROTECTION ENGINEER OF RECORD SHALL WITNESS ALL FINAL TESTS OF THE

SYSTEMS.

17. OFFICE, TRAINING, UNASSIGNED AND OTHER LIGHT HAZARD AREAS SHALL BE DESIGNED IN

ACCORDANCE WITH UFC 3-600-01 8 AUG 2016, CHANGE 2, 25 NOV 2018, HC-1 DESIGN

DISCHARGE CRITERIA OVER A 1,500 S.F. REMOTE AREA. 250 TOTAL GPM HOSE

ALLOWANCE SHALL BE INCLUDED. MAINTENANCE AND REPAIR BAYS, TOOL STORAGE,

WELDING SHOPS, AND MECHANICAL ROOMS SHALL BE DESIGNED IN ACCORDANCE WITH

FMGLOBAL HC-2 DESIGN DISCHARGE CRITERIA OVER A 2,500 S.F. REMOTE AREA. 250

TOTAL GPM HOSE ALLOWANCE SHALL BE INCLUDED. CONSOLIDATED BENCH REPAIR,

ARMS VAULT, AND COMSEC VAULT SHALL BE HYDRAULICALLY CALCULATED AS HC-3 0.30

GPM/SF OVER THE ENTIRE AREA PLUS 500 GPM HOSE ALLOWANCE. FLUID DISTRIBUTION

SHALL BE DESIGNED AS HC-3.

18. HEAT SHALL BE PROVIDED INSIDE THE ENTIRE BUILDING SO THE TEMPERATURE IS

MAINTAINED AT 40°F OR ABOVE AT ALL TIMES THROUGHOUT THE YEAR TO PREVENT THE

FIRE SPRINKLER PIPE, FITTINGS, SPRINKLERS, RISER, ETC. FROM FREEZING.

19. THE FIRE DEPARTMENT CONNECTION SHALL BE INSTALLED ON THE EXTERIOR WALL OF

THE MECHANICAL ROOM ADJACENT TO THE RISER AND WITHIN 150 FEET OF A FIRE

HYDRANT. IT SHALL BE WITHIN 150 FEET OF A FIRE LANE.

20. ALL RISER VALVES SHALL BE WIRED FOR SUPERVISION TO THE FIRE ALARM PANEL. ALL

WATER FLOW DETECTORS SHALL BE WIRED TO THE FIRE ALARM PANEL.

21. A NEW NRS GATE VALVE WITH WALL POST INDICATOR SHALL BE INSTALLED ABOVE THE

EXISTING FIRE LINE LEAD-IN SO THAT THE WHEEL OF THE WALL POST IS APPROXIMATELY

36" ABOVE THE FINISHED GRADE.

22. INSTALL A NEW DOUBLE CHECK VALVE ASSEMBLY ON THE NEW FIRE SPRINKLER RISER.

23. FLOW TEST RESULTS ARE PROVIDED BELOW. CONDUCT A NEW WATER FLOW TEST IF

RESULTS ARE OVER 12 MONTHS. VERIFY WITH ENGINEER OF RECORD, AND PROVIDE NEW

HYDRAULIC CALCULATIONS BASED UPON NEW INFORMATION.

THE FOLLOWING FLOW TEST HAS BEEN USED TO DETERMINE PIPE SIZES SHOWN ON THE

PLAN FOR BIDDING PURPOSES:

STATIC 52 PSI

RESIDUAL 46 PSI

FLOW 1154 GPM

DATE 10-30-18

APPLICABLE STANDARDS

UFC 1-200-01, REVISION 8/01/2015, GENERAL BUILDING REQUIREMENTS

UFC 3-600-01, FIRE PROTECTION ENGINEERING FOR FACILITIES, 8

AUGUST 2016, CHANGE 2, 25 MARCH 2018

UFC 4-010-01, REVISION 10/01/2013, DoD MINIMUM ANTITERRORISM

STANDARDS FOR BUILDINGS

INTERNATIONAL BUILDING CODE, 2015, WITH UFC MODIFICATIONS

NFPA 1, 2015 EDITION

NFPA 13, 2016 EDITION, INSTALLATION OF SPRINKLER SYSTEMS

NFPA 30, 2015 EDITION, FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE

NFPA 30A, 2015 EDITION, MOTOR FUELS DISPENSING AND REPAIR

GARAGE CODE

NFPA 30B, 2015 EDITION, MANUFACTURE AND STORAGE OF AEROSOL

PRODUCTS

NFPA 70, 2017 EDITION, NATIONAL ELECTRICAL CODE

NFPA 72, 2016 EDITION, NATIONAL FIRE ALARM AND SIGNALING CODE

NFPA 101, 2015 EDITION, LIFE SAFETY CODE

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I L E

N

A M

E

I S

S U

E

D

A T

E

C O

N T

R A

C T

O

S O

L I C

I T

A T

I O

N

N

O

F I

U M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-001

G E

N E

R A

L

N

O T

S

D

Y M

B O

L S

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

W

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

H

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

B

D

G

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

PLAN NORTH

KEY PLAN

MAINTENANCE

AREA

CONSOLIDATED

MATCHLINE MATCHLINE

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-002

D E

S I G

N

C

R I T

E R

I

F I R

O

E

A

A

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FIRE SPRINKLER DESIGN CRITERIA - FIRST FLOOR AREA A

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

SEE 2ND FLOOR PLAN FOR OVERHEAD

AutoCAD SHX Text

FIRE SPRINKLER LAYOUT THIS AREA.

AutoCAD SHX Text

HC-1 DESIGN CRITERIA WITH MINIMUM 5.6 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 225 S.F. DISCHARGING

AutoCAD SHX Text

0.10 GPM/SF OVER 1500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-2 DESIGN CRITERIA WITH MINIMUM 8.0 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 130 S.F. DISCHARGING

AutoCAD SHX Text

0.20 GPM/SF OVER 2500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-3 DESIGN CRITERIA WITH MINIMUM 11.2 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 100 S.F. DISCHARGING

AutoCAD SHX Text

0.30 GPM/SF OVER 2500 S.F. (ENTIRE AREA) + 500 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

DESIGN FOR NFPA 30, 2015 EDITION FOR PALLETIZED AND

AutoCAD SHX Text

HIGH PILED STORAGE OF CLASS IIIA LIQUIDS UP TO 5 FEET

AutoCAD SHX Text

IN HEIGHT AND CLASS IIIB LIQUIDS UP TO 18 FEET IN

AutoCAD SHX Text

HEIGHT STORED IN >5 - < OR = 60 GALLON METAL

AutoCAD SHX Text

NON-RELIEVING CONTAINERS. ADD 500 GPM HOSE ALLOWANCE.

AutoCAD SHX Text

0.40 GPM/SF OVER THE ENTIRE AREA.

AutoCAD SHX Text

%%UDESIGN CRITERIA LEGEND

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

SCALE 1/8"=1'-0"

MATCHLINE MATCHLINE

EXISTING CRANE STRUCTURE ABOVE

EXISTING CRANE STRUCTURE ABOVE

PLAN NORTH

KEY PLAN

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-003

D E

S I G

N

C

R I T

E R

I R

O

E

A

B

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FIRE SPRINKLER DESIGN CRITERIA - FIRST FLOOR AREA B

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

SEE 2ND FLOOR PLAN FOR FIRE

AutoCAD SHX Text

SPRINKLER LAYOUT THIS AREA.

AutoCAD SHX Text

HC-1 DESIGN CRITERIA WITH MINIMUM 5.6 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 225 S.F. DISCHARGING

AutoCAD SHX Text

0.10 GPM/SF OVER 1500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-2 DESIGN CRITERIA WITH MINIMUM 8.0 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 130 S.F. DISCHARGING

AutoCAD SHX Text

0.20 GPM/SF OVER 2500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-3 DESIGN CRITERIA WITH MINIMUM 11.2 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 100 S.F. DISCHARGING

AutoCAD SHX Text

0.30 GPM/SF OVER 2500 S.F. (ENTIRE AREA) + 500 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

DESIGN FOR NFPA 30, 2015 EDITION FOR PALLETIZED AND

AutoCAD SHX Text

HIGH PILED STORAGE OF CLASS IIIA LIQUIDS UP TO 5 FEET

AutoCAD SHX Text

IN HEIGHT AND CLASS IIIB LIQUIDS UP TO 18 FEET IN

AutoCAD SHX Text

HEIGHT STORED IN >5 - < OR = 60 GALLON METAL

AutoCAD SHX Text

NON-RELIEVING CONTAINERS. ADD 500 GPM HOSE ALLOWANCE.

AutoCAD SHX Text

0.40 GPM/SF OVER THE ENTIRE AREA.

AutoCAD SHX Text

%%UDESIGN CRITERIA LEGEND

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

CORRIDOR

OPEN TO BELOW

MATCHLINE MATCHLINE

MAINTENANCE

AREA

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-004

D E

S I G

N

C

R I T

E R

E

C O

O

E

A

A

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FIRE SPRINKLER DESIGN CRITERIA - SECOND FLOOR AREA A

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

HC-1 DESIGN CRITERIA WITH MINIMUM 5.6 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 225 S.F. DISCHARGING

AutoCAD SHX Text

0.10 GPM/SF OVER 1500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-2 DESIGN CRITERIA WITH MINIMUM 8.0 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 130 S.F. DISCHARGING

AutoCAD SHX Text

0.20 GPM/SF OVER 2500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-3 DESIGN CRITERIA WITH MINIMUM 11.2 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 100 S.F. DISCHARGING

AutoCAD SHX Text

0.30 GPM/SF OVER 2500 S.F. (ENTIRE AREA) + 500 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

DESIGN FOR NFPA 30, 2015 EDITION FOR PALLETIZED AND

AutoCAD SHX Text

HIGH PILED STORAGE OF CLASS IIIA LIQUIDS UP TO 5 FEET

AutoCAD SHX Text

IN HEIGHT AND CLASS IIIB LIQUIDS UP TO 18 FEET IN

AutoCAD SHX Text

HEIGHT STORED IN >5 - < OR = 60 GALLON METAL

AutoCAD SHX Text

NON-RELIEVING CONTAINERS. ADD 500 GPM HOSE ALLOWANCE.

AutoCAD SHX Text

0.40 GPM/SF OVER THE ENTIRE AREA.

AutoCAD SHX Text

%%UDESIGN CRITERIA LEGEND

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

COMM 2

CORRIDOR

TRAINING

ROOM

OPEN TO BELOW

ROOF BELOW

UNASSIGNED

EXISTING CRANE STRUCTURE ABOVE

EXISTING CRANE STRUCTURE ABOVE

MATCHLINE MATCHLINE

REPAIR

AREA

PLAN NORTH

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-005

D E

S I G

N

C

R I T

E R

E

C O

O

E

A

B

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FIRE SPRINKLER DESIGN CRITERIA - SECOND FLOOR AREA B

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

HC-1 DESIGN CRITERIA WITH MINIMUM 5.6 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 225 S.F. DISCHARGING

AutoCAD SHX Text

0.10 GPM/SF OVER 1500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

HC-2 DESIGN CRITERIA WITH MINIMUM 8.0 K-FACTOR

AutoCAD SHX Text

SPRINKLERS SPACED UP TO 130 S.F. DISCHARGING

AutoCAD SHX Text

0.20 GPM/SF OVER 2500 S.F. + 250 GPM

AutoCAD SHX Text

HOSE ALLOWANCE.

AutoCAD SHX Text

%%UDESIGN CRITERIA LEGEND

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FD-101

F I R

E

S

P R

I N

K L

E R

D E

M

P

A

N

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

3/32" = 1'-0"

A-101

A1

FLOOR PLAN - DEMO

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

REMOVE ALL EXISTING FIRE SPRINKLER ELEMENTS

AutoCAD SHX Text

AND DEVICES INCLUDING AIR COMPRESSOR,

AutoCAD SHX Text

RISER, VALVES, PIPE, SPRINKLERS, FITTINGS,

ELECTRICAL AND MECHANICAL ALARMS, ETC.

A

B

MAINTENANCE

AREA

MATCHLINE MATCHLINE

A.8A.2

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-101

F L

O O

R

P

L A

N

F I R

O

E

A

A

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FLOOR PLAN - FIRST FLOOR AREA A

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

SEE 2ND FLOOR PLAN FOR OVERHEAD

AutoCAD SHX Text

FIRE SPRINKLER LAYOUT THIS AREA.

AutoCAD SHX Text

TO PIPE IN MAINTENANCE BAY.

AutoCAD SHX Text

SEE SHEET FP102 FOR CONTINUATION.

AutoCAD SHX Text 2-4

AutoCAD SHX Text 6"

AutoCAD SHX Text 1-0

AutoCAD SHX Text 6"

AutoCAD SHX Text 9-9

AutoCAD SHX Text 6"

AutoCAD SHX Text E2

AutoCAD SHX Text S1

AutoCAD SHX Text S2

AutoCAD SHX Text

2-1/2" PIPE DOWN TO 2-1/2" ANGLE

AutoCAD SHX Text VALVE WITH 2-1/2" x 1-1/2" REDUCING

AutoCAD SHX Text

CAP AND CHAIN. BRACE TO WALL.

AutoCAD SHX Text

TO 6" CROSSMAIN - 2" PIPE

AutoCAD SHX Text

WITH SECTION CONTROL VALVE

AutoCAD SHX Text

TO SUPPLY SPRINKLERS IN THE

AutoCAD SHX Text

OIL SERVICE PIT.

AutoCAD SHX Text 27-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-11

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-0

AutoCAD SHX Text 2"

AutoCAD SHX Text Sprinkler Head Schedule

AutoCAD SHX Text Symbol

AutoCAD SHX Text Count

AutoCAD SHX Text Thread

AutoCAD SHX Text K-Factor

AutoCAD SHX Text Description

AutoCAD SHX Text Note

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 8.0

AutoCAD SHX Text

286°F 8.0K 17/32" ORIFICE 3/4"NPT STANDARD RESPONSE BRZ HORIZONTAL SIDEWALL

AutoCAD SHX Text 4 = Total Number of Heads This Floor = Total Number of Heads This Floor

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

A B C D E F H J

ELEC

TOOL ROOM

COMBAT

SPARES

COMM 1

MENS

CONSOLIDATED

BENCH

REPAIR

WOMENS

JAN

CORRIDOR

REPAIR

AREA

MECH

FLUID DISTR

BREAK /

TRAINING

OFFICE 1

OFFICE 2

ADMIN SHOP

CONTROL

ARMS VAULT

MATCHLINE

NON-SENS

SECURE

STOR

EXISTING CRANE STRUCTURE ABOVE

EXISTING CRANE STRUCTURE ABOVE

COMSEC

VAULT

F.5 F.7 G.7 G.9F.9

PLAN NORTH

KEY PLAN

1.1

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-102

F L

O O

R

P

L A

N

F I R

O

E

A

B

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FLOOR PLAN - FIRST FLOOR AREA B

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

SEE 2ND FLOOR PLAN FOR FIRE

AutoCAD SHX Text

SPRINKLER LAYOUT THIS AREA.

AutoCAD SHX Text

FIRE SPRINKLER

AutoCAD SHX Text

RISER

AutoCAD SHX Text

TO PIPE IN MAINTENANCE BAY.

AutoCAD SHX Text

SEE SHEET FP102 FOR CONTINUATION.

AutoCAD SHX Text 2-4

AutoCAD SHX Text 6"

AutoCAD SHX Text 1-0

AutoCAD SHX Text 6"

AutoCAD SHX Text 9-9

AutoCAD SHX Text 6"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-10\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-7\

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-7\

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-11\

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-7\

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-11\

AutoCAD SHX Text 2"

AutoCAD SHX Text 7-11

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-0\

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-10\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-11

AutoCAD SHX Text 1"

AutoCAD SHX Text 3-1

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9\

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-5

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 13-6\

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-5

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 14-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 7-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 7-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 7-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 7-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 14-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-10

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-0\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-10

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-3

AutoCAD SHX Text 6"

AutoCAD SHX Text 2-3

AutoCAD SHX Text 6"

AutoCAD SHX Text 8-2\

AutoCAD SHX Text 6"

AutoCAD SHX Text 8-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 6"

AutoCAD SHX Text 6-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 13-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 3-8

AutoCAD SHX Text 6"

AutoCAD SHX Text 13-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 7-7\

AutoCAD SHX Text 6"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 6"

AutoCAD SHX Text 8-10

AutoCAD SHX Text 6"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-4

AutoCAD SHX Text 8"

AutoCAD SHX Text 1-11

AutoCAD SHX Text 8"

AutoCAD SHX Text 10-1

AutoCAD SHX Text 8"

AutoCAD SHX Text 1-11

AutoCAD SHX Text 8"

AutoCAD SHX Text 14-0

AutoCAD SHX Text 8"

AutoCAD SHX Text 14-0

AutoCAD SHX Text 8"

AutoCAD SHX Text 3-9

AutoCAD SHX Text 8"

AutoCAD SHX Text 1-3

AutoCAD SHX Text 6"

AutoCAD SHX Text 5-0\

AutoCAD SHX Text 8"

AutoCAD SHX Text 1-3

AutoCAD SHX Text 6"

AutoCAD SHX Text 13-0

AutoCAD SHX Text 8"

AutoCAD SHX Text 1-5

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-1\

AutoCAD SHX Text 8"

AutoCAD SHX Text 8-3

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-8\

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-8\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 1"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 1"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 1"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 1"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 3-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text

SEE SHEET FP102 FOR CONTINUATION

AutoCAD SHX Text

IN MAINTENANCE BAY.

AutoCAD SHX Text E2

AutoCAD SHX Text E3

AutoCAD SHX Text E4

AutoCAD SHX Text E5

AutoCAD SHX Text E6

AutoCAD SHX Text E7

AutoCAD SHX Text F3

AutoCAD SHX Text F4

AutoCAD SHX Text F5

AutoCAD SHX Text F6

AutoCAD SHX Text F7

AutoCAD SHX Text

TEE

AutoCAD SHX Text G

AutoCAD SHX Text

TBFP

AutoCAD SHX Text

BBFP

AutoCAD SHX Text

UG1

AutoCAD SHX Text 1-6\

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-6\

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-6\

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-8

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-9

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-5

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-8

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 11-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-3

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-3\

AutoCAD SHX Text 2"

AutoCAD SHX Text 11-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-1

AutoCAD SHX Text 2"

AutoCAD SHX Text 0-4\

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-4\

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 1"

AutoCAD SHX Text S1

AutoCAD SHX Text S2

AutoCAD SHX Text S3

AutoCAD SHX Text S4

AutoCAD SHX Text S5

AutoCAD SHX Text S6

AutoCAD SHX Text S7

AutoCAD SHX Text S8

AutoCAD SHX Text S9

AutoCAD SHX Text S10

AutoCAD SHX Text S11

AutoCAD SHX Text S12

AutoCAD SHX Text S13

AutoCAD SHX Text S14

AutoCAD SHX Text S15

AutoCAD SHX Text S16

AutoCAD SHX Text S17

AutoCAD SHX Text S18

AutoCAD SHX Text S19

AutoCAD SHX Text S20

AutoCAD SHX Text Z1

AutoCAD SHX Text Z2

AutoCAD SHX Text Z3

AutoCAD SHX Text Z4

AutoCAD SHX Text Z5

AutoCAD SHX Text Z6

AutoCAD SHX Text Z7

AutoCAD SHX Text Z8

AutoCAD SHX Text 1-11\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-2\

AutoCAD SHX Text 6"

AutoCAD SHX Text 6-9\

AutoCAD SHX Text 8"

AutoCAD SHX Text Design Area Number:

AutoCAD SHX Text Hose Allowance (Included):

AutoCAD SHX Text System Flow:

AutoCAD SHX Text Design Density:

AutoCAD SHX Text Design Area Location:

AutoCAD SHX Text Hazard/Occupancy:

AutoCAD SHX Text Design Area:

AutoCAD SHX Text Number of Sprinklers in Design Area:

AutoCAD SHX Text System Pressure:

AutoCAD SHX Text Hydraulic Calculation Data

AutoCAD SHX Text

AutoCAD SHX Text

CONSOLIDATED BENCH REPAIR

AutoCAD SHX Text

HC-3

AutoCAD SHX Text 0.30

AutoCAD SHX Text

ENTIRE AREA

AutoCAD SHX Text

AutoCAD SHX Text 1258.97

AutoCAD SHX Text 42.36

AutoCAD SHX Text

AutoCAD SHX Text

2-1/2" PIPE DOWN TO 2-1/2" ANGLE

AutoCAD SHX Text VALVE WITH 2-1/2" x 1-1/2" REDUCING

AutoCAD SHX Text

CAP AND CHAIN. BRACE TO WALL.

AutoCAD SHX Text

2-1/2" PIPE DOWN TO 2-1/2" ANGLE

AutoCAD SHX Text VALVE WITH 2-1/2" x 1-1/2" REDUCING

AutoCAD SHX Text

CAP AND CHAIN. BRACE TO WALL.

AutoCAD SHX Text 2-8\

AutoCAD SHX Text 8"

AutoCAD SHX Text 7-1\

AutoCAD SHX Text 8"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 4"

AutoCAD SHX Text 1-2

AutoCAD SHX Text 4"

AutoCAD SHX Text 2-4

AutoCAD SHX Text 8"

AutoCAD SHX Text

TWO-WAY WALL MOUNTED

AutoCAD SHX Text

FIRE DEPARTMENT CONNECTION

AutoCAD SHX Text

FOUR-WAY BACKFLOW

AutoCAD SHX Text

TEST HEADER WITH

AutoCAD SHX Text

CAPS AND CHAINS

AutoCAD SHX Text

NEW 8" PVC C900 UNDERGROUND

AutoCAD SHX Text

PIPE OUT TO EXISTING 6" UNDERGROUND

AutoCAD SHX Text

PIPE. SEE CIVIL PLANS FOR INFORMATION.

AutoCAD SHX Text

FLOW TEST DATA

AutoCAD SHX Text

STATIC PRESSURE:

AutoCAD SHX Text

TEST DONE BY:

AutoCAD SHX Text

RESIDUAL PRESSURE:

AutoCAD SHX Text

LOCATION:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FLOW:

AutoCAD SHX Text CITY MAIN on HELL ON WHEELS BLVD.

AutoCAD SHX Text 10-30-2018

AutoCAD SHX Text

RFPE & AM WATER

AutoCAD SHX Text

AutoCAD SHX Text 1154.86

AutoCAD SHX Text

AutoCAD SHX Text Sprinkler Head Schedule

AutoCAD SHX Text Symbol

AutoCAD SHX Text Count

AutoCAD SHX Text Thread

AutoCAD SHX Text K-Factor

AutoCAD SHX Text Description

AutoCAD SHX Text Note

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 8.0

AutoCAD SHX Text

200°F 8.0K-FACTOR 3/4"NPT 17/32"ORIFICE QUICK RESPONSE BRZ UPRIGHT ON SPRIG UP

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 11.2

AutoCAD SHX Text 286°F 11.2 K-FACTOR 3/4"NPT .64"ORIFICE STANDARD RESPONSE BRZ UPRIGHT ON SPRIG UP

AutoCAD SHX Text

AutoCAD SHX Text 1/2"

AutoCAD SHX Text 5.6

AutoCAD SHX Text

155° 5.6K-FACTOR 1/2"NPT 1/2"ORIFICE CHROME SEMI-RECESSED QUICK RESPONSE PENDENT

AutoCAD SHX Text on Drop

AutoCAD SHX Text 67 = Total Number of Heads This Floor = Total Number of Heads This Floor

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

A

B

OPEN TO BELOW

MATCHLINE MATCHLINE

MAINTENANCE

AREA

A.8A.2

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-103

F L

O O

R

P

L A

N

S E

C O

O

E

A

A

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FLOOR PLAN - SECOND FLOOR AREA A

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text

FROM 1ST FLOOR.

AutoCAD SHX Text

SEE FP101 FOR

AutoCAD SHX Text S1

AutoCAD SHX Text S2

AutoCAD SHX Text S3

AutoCAD SHX Text S4

AutoCAD SHX Text S5

AutoCAD SHX Text S6

AutoCAD SHX Text S7

AutoCAD SHX Text S8

AutoCAD SHX Text S9

AutoCAD SHX Text S10

AutoCAD SHX Text S11

AutoCAD SHX Text S12

AutoCAD SHX Text S13

AutoCAD SHX Text S14

AutoCAD SHX Text S15

AutoCAD SHX Text S16

AutoCAD SHX Text S17

AutoCAD SHX Text S18

AutoCAD SHX Text S19

AutoCAD SHX Text S20

AutoCAD SHX Text S21

AutoCAD SHX Text S22

AutoCAD SHX Text S23

AutoCAD SHX Text S24

AutoCAD SHX Text S25

AutoCAD SHX Text A1

AutoCAD SHX Text A2

AutoCAD SHX Text A3

AutoCAD SHX Text A4

AutoCAD SHX Text A5

AutoCAD SHX Text A6

AutoCAD SHX Text A7

AutoCAD SHX Text A9

AutoCAD SHX Text A10

AutoCAD SHX Text B1

AutoCAD SHX Text B2

AutoCAD SHX Text B3

AutoCAD SHX Text B4

AutoCAD SHX Text B5

AutoCAD SHX Text B6

AutoCAD SHX Text B7

AutoCAD SHX Text A8

AutoCAD SHX Text B8

AutoCAD SHX Text B9

AutoCAD SHX Text B10

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text C3

AutoCAD SHX Text C4

AutoCAD SHX Text C5

AutoCAD SHX Text C6

AutoCAD SHX Text C7

AutoCAD SHX Text C8

AutoCAD SHX Text C9

AutoCAD SHX Text C10

AutoCAD SHX Text D1

AutoCAD SHX Text D2

AutoCAD SHX Text D3

AutoCAD SHX Text D4

AutoCAD SHX Text D5

AutoCAD SHX Text D6

AutoCAD SHX Text D7

AutoCAD SHX Text D8

AutoCAD SHX Text D9

AutoCAD SHX Text D10

AutoCAD SHX Text D10A

AutoCAD SHX Text Design Area Number:

AutoCAD SHX Text Hose Allowance (Included):

AutoCAD SHX Text System Flow:

AutoCAD SHX Text Design Density:

AutoCAD SHX Text Design Area Location:

AutoCAD SHX Text Hazard/Occupancy:

AutoCAD SHX Text Design Area:

AutoCAD SHX Text Number of Sprinklers in Design Area:

AutoCAD SHX Text System Pressure:

AutoCAD SHX Text Hydraulic Calculation Data

AutoCAD SHX Text

AutoCAD SHX Text

HIGH BAY AREA A

AutoCAD SHX Text

OH2/HC-2

AutoCAD SHX Text .2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 826.36

AutoCAD SHX Text 45.6

AutoCAD SHX Text

AutoCAD SHX Text

FLOW TEST DATA

AutoCAD SHX Text

STATIC PRESSURE:

AutoCAD SHX Text

TEST DONE BY:

AutoCAD SHX Text

RESIDUAL PRESSURE:

AutoCAD SHX Text

LOCATION:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FLOW:

AutoCAD SHX Text CITY MAIN on HELL ON WHEELS BLVD.

AutoCAD SHX Text 10-30-2018

AutoCAD SHX Text

RFPE & AM WATER

AutoCAD SHX Text

AutoCAD SHX Text 1154.86

AutoCAD SHX Text

AutoCAD SHX Text Sprinkler Head Schedule

AutoCAD SHX Text Symbol

AutoCAD SHX Text Count

AutoCAD SHX Text Thread

AutoCAD SHX Text K-Factor

AutoCAD SHX Text Description

AutoCAD SHX Text Note

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 8.0

AutoCAD SHX Text

200°F BRZ 17/32"ORIFICE 3/4"NPT BRZ QUICK RESPONSE UPRIGHT

AutoCAD SHX Text

SPRIG UPS TO BE INSTALLED BELOW 2ND FLOOR

AutoCAD SHX Text 68 = Total Number of Heads This Floor = Total Number of Heads This Floor

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

COMM 2

CORRIDOR

TRAINING

ROOM

OPEN TO BELOW

ROOF BELOW

UNASSIGNED

EXISTING CRANE STRUCTURE ABOVE

EXISTING CRANE STRUCTURE ABOVE

MATCHLINE

REPAIR

AREA

PLAN NORTH

KEY PLAN

1.1

A B C D E F H JF.5 F.7 G.7 G.9F.9

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-104

F L

O O

R

P

L A

N

S E

C O

O

E

A

B

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

1/8" = 1'-0"

A-101

A1

FLOOR PLAN - SECOND FLOOR AREA B

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 12-2\

AutoCAD SHX Text 2"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 12-3\

AutoCAD SHX Text 6"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 4"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 4"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 4"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 4"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 4"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 4"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 4"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 4"

AutoCAD SHX Text 11-11\

AutoCAD SHX Text 4"

AutoCAD SHX Text 12-0\

AutoCAD SHX Text 4"

AutoCAD SHX Text 12-3\

AutoCAD SHX Text 4"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 6"

AutoCAD SHX Text 9-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 11-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 10-6

AutoCAD SHX Text 2"

AutoCAD SHX Text 11-0

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 8-0

AutoCAD SHX Text 8-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 3-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 19'-0"

AutoCAD SHX Text 9'-6"

AutoCAD SHX Text 19'-0"

AutoCAD SHX Text

TO 1ST LEVEL. SEE

AutoCAD SHX Text

SHT FP101 FOR

AutoCAD SHX Text

CONTINUATION.

AutoCAD SHX Text

FROM 1ST FLOOR.

AutoCAD SHX Text

SEE FP101 FOR

AutoCAD SHX Text

CONTINUATION.

AutoCAD SHX Text 36-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 19'-0"

AutoCAD SHX Text 5-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 5-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text 2-11\

AutoCAD SHX Text 6"

AutoCAD SHX Text 4-11

AutoCAD SHX Text 6"

AutoCAD SHX Text 4-0\

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-11

AutoCAD SHX Text 2"

AutoCAD SHX Text 4-0\

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-11

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-8

AutoCAD SHX Text 4"

AutoCAD SHX Text 9-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 9-7

AutoCAD SHX Text 4"

AutoCAD SHX Text 14-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 6-7

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 8-1\

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-4

AutoCAD SHX Text 2"

AutoCAD SHX Text 9-7

AutoCAD SHX Text 4"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 9-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 0-6

AutoCAD SHX Text 4"

AutoCAD SHX Text 9-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 1-8

AutoCAD SHX Text 4"

AutoCAD SHX Text 5-0

AutoCAD SHX Text 4"

AutoCAD SHX Text 6-8

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-5

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-9\

AutoCAD SHX Text 2"

AutoCAD SHX Text 6-3\

AutoCAD SHX Text 2"

AutoCAD SHX Text 5-11

AutoCAD SHX Text 2"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text J1

AutoCAD SHX Text J2

AutoCAD SHX Text J3

AutoCAD SHX Text J4

AutoCAD SHX Text J5

AutoCAD SHX Text J6

AutoCAD SHX Text J7

AutoCAD SHX Text J8

AutoCAD SHX Text J9

AutoCAD SHX Text J10

AutoCAD SHX Text J11

AutoCAD SHX Text J12

AutoCAD SHX Text J13

AutoCAD SHX Text K1

AutoCAD SHX Text K2

AutoCAD SHX Text K3

AutoCAD SHX Text K5

AutoCAD SHX Text K6

AutoCAD SHX Text K7

AutoCAD SHX Text K8

AutoCAD SHX Text K9

AutoCAD SHX Text K10

AutoCAD SHX Text K11

AutoCAD SHX Text K12

AutoCAD SHX Text K13

AutoCAD SHX Text K13

AutoCAD SHX Text K14

AutoCAD SHX Text 21-8

AutoCAD SHX Text K3T

AutoCAD SHX Text K1T

AutoCAD SHX Text K2T

AutoCAD SHX Text K4T

AutoCAD SHX Text K5T

AutoCAD SHX Text K6T

AutoCAD SHX Text K7T

AutoCAD SHX Text K8T

AutoCAD SHX Text K9T

AutoCAD SHX Text K10T

AutoCAD SHX Text K11T

AutoCAD SHX Text K12T

AutoCAD SHX Text K13T

AutoCAD SHX Text J1T

AutoCAD SHX Text J2T

AutoCAD SHX Text J3T

AutoCAD SHX Text J4T

AutoCAD SHX Text J5T

AutoCAD SHX Text J6T

AutoCAD SHX Text J7T

AutoCAD SHX Text J8T

AutoCAD SHX Text J9T

AutoCAD SHX Text J10T

AutoCAD SHX Text J11T

AutoCAD SHX Text J12T

AutoCAD SHX Text 52-0\

AutoCAD SHX Text 6"

AutoCAD SHX Text K4

AutoCAD SHX Text A10

AutoCAD SHX Text B9

AutoCAD SHX Text B10

AutoCAD SHX Text C10

AutoCAD SHX Text D9

AutoCAD SHX Text D10

AutoCAD SHX Text D11

AutoCAD SHX Text D12

AutoCAD SHX Text D13

AutoCAD SHX Text B11

AutoCAD SHX Text B12

AutoCAD SHX Text B13

AutoCAD SHX Text E

AutoCAD SHX Text E1

AutoCAD SHX Text E2

AutoCAD SHX Text Design Area Number:

AutoCAD SHX Text Hose Allowance (Included):

AutoCAD SHX Text System Flow:

AutoCAD SHX Text Design Density:

AutoCAD SHX Text Design Area Location:

AutoCAD SHX Text Hazard/Occupancy:

AutoCAD SHX Text Design Area:

AutoCAD SHX Text Number of Sprinklers in Design Area:

AutoCAD SHX Text System Pressure:

AutoCAD SHX Text Hydraulic Calculation Data

AutoCAD SHX Text

AutoCAD SHX Text

HIGH BAY AREA B

AutoCAD SHX Text

OH2 /HC-2

AutoCAD SHX Text .2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 840.01

AutoCAD SHX Text 46.88

AutoCAD SHX Text

AutoCAD SHX Text D10A

AutoCAD SHX Text

FLOW TEST DATA

AutoCAD SHX Text

STATIC PRESSURE:

AutoCAD SHX Text

TEST DONE BY:

AutoCAD SHX Text

RESIDUAL PRESSURE:

AutoCAD SHX Text

LOCATION:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

FLOW:

AutoCAD SHX Text CITY MAIN on HELL ON WHEELS BLVD.

AutoCAD SHX Text 10-30-2018

AutoCAD SHX Text

RFPE & AM WATER

AutoCAD SHX Text

AutoCAD SHX Text 1154.86

AutoCAD SHX Text

AutoCAD SHX Text Sprinkler Head Schedule

AutoCAD SHX Text Symbol

AutoCAD SHX Text Count

AutoCAD SHX Text Thread

AutoCAD SHX Text K-Factor

AutoCAD SHX Text Description

AutoCAD SHX Text Note

AutoCAD SHX Text

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 8.0

AutoCAD SHX Text

200°F BRZ 17/32"ORIFICE 3/4"NPT BRZ STANDARD RESPONSE UPRIGHT

AutoCAD SHX Text 72 = Total Number of Heads This Floor = Total Number of Heads This Floor

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

US Army Corps of Engineers ®

SHEET ID

U S

A

R M

Y

E

N G

I N

E E

R

D

I S

T R

I C

T

D R

A W

N

B

Y

D E

S I G

N E

D

B

Y

S U

B M

I T

T E

D

B

Y

S I Z

E

C H

E C

K E

D

B

Y

A N

S I

D

F I

M

E

I S

S U

E

D

A T

E

C O

N T

R A

S O

L I C

I T

A T

I O

N

N

O

F I

M

B E

R

1 2 3 4 5

D

C

B

A

S a v o y

D r i v e

S u i t e

H o u s t o n

T e x a s

FP-501

G E

N E

R A

L

F

I R

E

S

P R

I N

K L

E R

D E

T A

I L

S

C O

R P

S

O

F

E

N G

I N

E E

R S

F O

R

T H

T

E X

A S

A P

R I L

- W G

D

F O

O

D

T

E X

A S

D E

S I G

N

O

F

T

E M

F

R

E N

O V

A T

I O

D

G

M A

R K

D E

S C

R I P

T I O

N

ADDISON, TEXAS 75001

800-381-5504

14135 MIDWAY, #G260

WWW.REEDFIRE.COM

FIRE PROTECTION

ENGINEERING

REED

TX REGISTRATION NO.F-5095

95% SUBMITTAL

AutoCAD SHX Text

STRUCTURAL SPAN

AutoCAD SHX Text

THAN 48" WIDE OR

AutoCAD SHX Text

SPRINKLER OVERHEAD

AutoCAD SHX Text

UPRIGHT SPRINKLER

AutoCAD SHX Text

WITH HEAD GUARD

AutoCAD SHX Text

WITHIN 18" OF

AutoCAD SHX Text

1" GLOBE VALVE

AutoCAD SHX Text

OBSTRUCTION GREATER

AutoCAD SHX Text

1" DOWN TO SPRINKLER

AutoCAD SHX Text

BELOW OBSTRUCTION

AutoCAD SHX Text

BRANCHLINE

AutoCAD SHX Text

CEILING TILE OR

AutoCAD SHX Text

NEW SPRINKLER

AutoCAD SHX Text

SYSTEM BRANCH LINE

AutoCAD SHX Text

WET-PIPE SPRINKLER

AutoCAD SHX Text

REDUCING

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UBEAM CLAMP HANGER DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UTRAPEZE HANGER DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UDRUM DRIP DETAIL AND DRAIN ABOVE CEILING

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%U SPRINKLER BELOW

AutoCAD SHX Text

%%UOBSTRUCTIONS DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UTYPICAL RETURN

AutoCAD SHX Text

%%UBEND DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

STRUCTURAL

AutoCAD SHX Text

BEAM CLAMP

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

PIPE RING

AutoCAD SHX Text

MEMBER

AutoCAD SHX Text

LOCKNUT

AutoCAD SHX Text

RETAINER STRAP

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

PIPE RING

AutoCAD SHX Text

BEAM CLAMP

AutoCAD SHX Text

LOCKNUT

AutoCAD SHX Text

HEX NUT AND

AutoCAD SHX Text

FLAT WASHER

AutoCAD SHX Text

ANGLE IRON OR

AutoCAD SHX Text

CHANNEL PER NFPA 13

AutoCAD SHX Text

MEMBER

AutoCAD SHX Text

RETAINER

AutoCAD SHX Text

STRAP

AutoCAD SHX Text

RIGID OR FIRELOCK

AutoCAD SHX Text

GROOVED TEE WITH

AutoCAD SHX Text

36" MINIMUM

AutoCAD SHX Text

RISER NIPPLE

AutoCAD SHX Text

LENGTH OF

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%URISER NIPPLE WITH

AutoCAD SHX Text

%%UFLEXIBLE COUPLING DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UFIRE LINE LEAD-IN

AutoCAD SHX Text

%%UFLOOR PENETRATION DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

STEEL PIPE

AutoCAD SHX Text

GROOVED COUPLING ON

AutoCAD SHX Text

GROOVED

AutoCAD SHX Text

FLEXIBLE

AutoCAD SHX Text

RISER NIPPLE

AutoCAD SHX Text

CROSS MAIN

AutoCAD SHX Text

RIGID OR FIRELOCK

AutoCAD SHX Text

WELD GROOVED OUTLET

AutoCAD SHX Text

GROOVED COUPLING

AutoCAD SHX Text

GYP BOARD CEILING

AutoCAD SHX Text

ALL THREAD ROD

AutoCAD SHX Text

3/8" FOR PIPE UNDER 6"

AutoCAD SHX Text

1/2" FOR PIPE OVER 6"

AutoCAD SHX Text

CONCRETE SLAB OR BEAM

AutoCAD SHX Text

SWIVEL RING HANGER

AutoCAD SHX Text

SPRINKLER PIPE

AutoCAD SHX Text

EXPANSION ANCHOR

AutoCAD SHX Text

- NOT TO SCALE.

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UCONCRETE ANCHOR HANGER DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

RIGID OR FIRELOCK

AutoCAD SHX Text

GROOVED TEE WITH

AutoCAD SHX Text

LESS THAN 36"

AutoCAD SHX Text

RISER NIPPLE

AutoCAD SHX Text

LENGTH OF

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

%%UTYPICAL RISER NIPPLE DETAIL

AutoCAD SHX Text

AutoCAD SHX Text

NTS

AutoCAD SHX Text

STEEL PIPE

AutoCAD SHX Text

GROOVED COUPLING ON

AutoCAD SHX Text

RISER NIPPLE

AutoCAD SHX Text

CROSS MAIN

AutoCAD SHX Text

RIGID OR FIRELOCK

AutoCAD SHX Text

WELD GROOVED OUTLET

AutoCAD SHX Text

GROOVED COUPLINGS

AutoCAD SHX Text

(PER NFPA 13)

AutoCAD SHX Text 1" Nipple and Cap or Plug

AutoCAD SHX Text Nipple or equivalent

AutoCAD SHX Text 2" x 12"

AutoCAD SHX Text 1" valve

AutoCAD SHX Text 1" valve

AutoCAD SHX Text Auxiliary Drain >5 GALLONS

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

1. Valve Not Smaller than 3/4"

AutoCAD SHX Text

2. Nipple

AutoCAD SHX Text

3. Cap or Plug

AutoCAD SHX Text Auxiliary Drain <5 Gallons

AutoCAD SHX Text (at least one shall be brass)

AutoCAD SHX Text Bearing Against Trench Walls

AutoCAD SHX Text Bearing Against Trench Wall

AutoCAD SHX Text Typical Thrust blocks

AutoCAD SHX Text Vg=-------- (neglecting Wy)

AutoCAD SHX Text Physical characteristics of the block are determined

AutoCAD SHX Text A = Cross sectinal area of pipe(in) =36 D'

AutoCAD SHX Text Allowable soil bearing pressure determines the minimum

AutoCAD SHX Text on the vertcal face of the block (Fp) or by joint

AutoCAD SHX Text thrust component (Tx) is counteracted by soil pressure

AutoCAD SHX Text Earth cover(We)is neeglected when determining(We) if

AutoCAD SHX Text unstable conditions are anticipated. The horizontal

AutoCAD SHX Text L = Minimum required restrained pipe length (ft)

AutoCAD SHX Text W = Density of thrust block material(ib/ft )

AutoCAD SHX Text where Wy = 1/2 Wc Lx

AutoCAD SHX Text Vg=-------- (including Wy)

AutoCAD SHX Text Service

AutoCAD SHX Text Pipe

AutoCAD SHX Text

THRUST

AutoCAD SHX Text

BLOCK

AutoCAD SHX Text Rod & Nuts

AutoCAD SHX Text per NFPA 24

AutoCAD SHX Text

4'-0" MIN

AutoCAD SHX Text Concrete

AutoCAD SHX Text Slab

AutoCAD SHX Text

BLDG.

AutoCAD SHX Text

WALL

AutoCAD SHX Text

FLANGE

AutoCAD SHX Text 1'-0"

AutoCAD SHX Text size of the block base.

AutoCAD SHX Text restraint.

AutoCAD SHX Text from the follwing formulas:

AutoCAD SHX Text P = Design pressure(psi)

AutoCAD SHX Text y = Backfill soil density (lb/ft )

AutoCAD SHX Text T = Resultant thrust force(lb)

AutoCAD SHX Text Where Vg=Volume of thrust block(ft)

AutoCAD SHX Text Wm

AutoCAD SHX Text Ty - Wy

AutoCAD SHX Text Wy

AutoCAD SHX Text PA Sin 0

AutoCAD SHX Text

NOMINAL

AutoCAD SHX Text IN. DEAD END 90%%D BEND 45%%d BEND BEND BEND

AutoCAD SHX Text PIPE DIA. 22.5%%d 11.25%%d

AutoCAD SHX Text NOTE: TO DETERMINE THRUST AT PRESSURE OTHER THAN 100psi, MULTPLY THE

AutoCAD SHX Text

THRUST OBTAINED IN THE TABLE BY THE RATIO OF THE PRESSURE TO 100.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD…