W9114F-21-Q-0007.pdf

SEE ADDENDUM

(No Collect Calls)

W9114F21Q0007 05-Nov-2020

b. TELEPHONE NUMBER

314-590-5414

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 07 Dec 2020

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W9114F9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

DOMENICO MADDALONI

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

W40M EUR REGIONAL CONTRACT OFC

KIRCHBERG KASERNE

BUILDING 3705

LANDSTUHL, 66849

GERMANY

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W91FVL 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

GENERAL HOSPITAL KARLOVAC

MARTINA BOGUT BARIC

3 ANDRIJE ŠTAMPARA STREET

KARLOVAC 47000

TEL: 385 1 4607 649 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339113

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF62

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W9114F21Q0007

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each Trauma Medical/Surgical Instruments

FFP

The Contractor shall delivery Trauma Medical/Surgical Instruments and Supplies Sets compatible for reconstructive, medical and surgical, neuro-technological and spine products, listed on the attached Technical Exhibit A.

NOTE: Backorders are not authorized.

The unit of measure “Each” is defined as the complete delivery of items listed in Technical Exhibit A Traceable Shipment, door-to-door, to:

General Hospital Karlovac, 3 Andrije tampara street, 47000, Karlovac Croatia

FOB: Destination

PSC CD: 6515

NET AMT

TECHNICAL EXHIBIT A

Supplies to be delivered and inspected at the following location:

General Hospital Karlovac, 3 Andrije Štampara street, 47000, Karlovac, Croatia

Delivery shall include all items listed below. Backorders are not authorized.

ITEM # QTY Description Unit Price

Ext.

Amount

Surgical pelvis set 1 Pelvis II - set of instruments 1 Pelvis II - set of pelvis retractors 1 Pelvis II - set pelvis tiles

1 Pelvis II - instr. and container for the pelvis tiles 1 Pelvis II - set of standard pelvis tiles 1 Pelvis II - instruments and container for the pelvis screws 1 Pelvis II - set of screws for the pelvis 1 Pelvis II - set of instruments for pelvic implants 1 Set of cannulated screws Asnis III 1 Instruments for cannulated screws Asnis III

BOARD SET

1 Handle for a large knife, length 135 mm 1 Handle for a large knife, length 180 mm 1 Scissors for dissection, slightly curved, length 180 mm 1 Scissors for dissection, slightly curved, length 200 mm 1 Scissors for dissection, slightly curved, length 230 mm 1 Scissors straight, for thread, length 180 mm 1 Scissors straight, heavier jaw, length 170 mm 2 Forceps anatomical, standard, length 180 mm 1 Forceps anatomical, standard, length 230 mm 1 Coagulation forceps, fine, length 160 mm 1 Coagulation forceps, fine, length 200 mm

Clamp for washing of the operating field, slightly curved, length 250 mm (per Duvall)

2 Surgical forceps, standard model, length 180 mm 2 Surgical forceps, short, extra large tip, length 145 mm 1 Clamp per Kocher, straight, length 200 mm 1 Clamp per Kocher, straight, length 245 mm 2 Clamp per Pean, slightly curved, length 140 mm 2 Clamp per Pean, slightly curved, length 160 mm 2 Clamp per Pean, slightly curved, length 200 mm

Hook per Korte, dull, four-toothed, for muscle, dim. 45 x 55 mm, length 230 mm

Hook per Kocher, four-toothed, semi-sharp, 16 x 20 mm, length 220 mm

Hook per Mathieu, blunt on both sides, in pair, dim. 37/45 x 25 mm, 41/47 x 13 mm

2 Hook per Richardson, blunt, blades 65 x 41 mm, length 250 mm

Hook per Kocher, blunt, dim. of blades 80 x 60 mm, length 250 mm

2 Needle-holder, standard, tip diameter 0.5, flat, length 180 mm 2 Needle-holder, standard, tip diameter 0.5, flat, length 200 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 240 mm 1 Acetab capsule clamp, granular tip, length 220 mm 1 Bone curette (kohlea), round, diameter 6,8 mm, length 170mm 1 Bone hook, single, sharp (small), length 230 mm 1 Bone hook, single, sharp (medium), length 230 mm 1 Raspatory for periosteum, flat, width 12 mm, length 160 mm 1 Elevation for lifting bones, wider model, length 160 mm 1 Reduction forceps for grasping bones, length 250 mm

1 Reduction forceps for grasping bones, length 160 mm

Subcostal hook, wider blades (60 mm), length 250 mm (per Langebeck)

Subcostal hook, slightly curved, wider blades (35 mm), length 270 mm,(per Homann)

2 Subcostal hook narrow tip, length 250 mm, (Cobra shaped) 1 Universal bending forceps, length 165 mm

Lateral wire cutting forceps (wire diameter up to 2.5mm), length

1 Chisel, flat, steel, tip width 13 mm, length 240 mm 1 Chisel, flat, steel, tip width 20 mm, length 245 mm 1 Hammer, metal, strong, length 220 mm 1 Screwdriver, hexagonal, for screws 4.5 and 6.5 mm 1 Depth gauge, larger, for screws 4.5 and 6.5 mm 1 Guide handle, double drilling, for drill size 3.2 and 4.5 mm

Bone cutting forceps, curved, wider jaw, length 205 mm (per Luer)

2 Metal dish, kidney-shaped, length 250 mm 1 Metal dish, capacity 0,4l 1 Container lid 588 x 285 x 46 mm 1 Sterilization box 592 x 274 x 90 mm 1 Wire basket 540 x 253 x 64 mm without feet 1 Bone drill bit for screws 4.5-6.5

SET FOR THE FOOT JOINT

1 Handle for a small knife, length 125 mm 1 Scissors for dissection, slightly curved, length 180 mm 1 Scissors for dissection, slightly curved, length 200 mm 1 Scissors straight, for thread, length 180 mm 1 Scissors straight, heavier jaw, length 170 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 180 mm 1 Needle-holder short, fine, length 130 mm, per Halsey 1 Forceps anatomical, standard, length 180 mm 1 Forceps surgical, standard model, length 180 mm 1 Forceps surgical, short, extra large tip, length 145 mm 1 Coagulation forceps, fine, fine, length 160 mm 2 Clamp per Pean, slightly curved, length 140 mm 2 Clamp per Pean, slightly curved, length 160 mm 1 Clamp per Kocher, straight, length 145 mm 1 Clamp per Kocher, straight, length 180 mm 1 Reduction forceps for grasping bones, smaller, length 160 mm

Reduction forceps for grasping bones, with a serrated tip, lockable handle, length 140 mm

1 Reduction forceps sharp tipped, lockable handle, length 130 mm

Reduction forceps with a bunt- sharp tip, lockable handle, length 130 mm

1 Bone curette (kohlea), round, diameter 3 mm, length 165mm

Bone curette (kohlea), elongated tip, diameter 3,4 mm, length 170mm

Periosteum elevation, with a slightly curved blade, flat, tip width 3 mm, 187/87 mm (Raspatory)

1 Raspatory per Williger, length 160 mm 1 Raspatory flat with plastic handle, width 12 mm, length 160 mm 1 Single-toothed bone microhook , length 160 mm 1 Single-toothed bone hook , sharp, small, length 160-180 mm do 200 mm

2 Subcostal hooks small, length 160 mm

Subcostal hook with a short slender tip, tip width 8 mm, length 160 mm

1 Chisel for osteotomy, straight, tip width 10 mm, length 150 mm 1 Depth gauge for screws 2.7/4.0 mm, screw gauge up to 60 mm 1 Screwdriver, hexagonal, for screws 3.5/4.0 mm 2 Hooks blunt, double-toothed, length 160 mm 2 Hooks blunt, double-sided, (per Farabeuf), length 125

Hooks blunt, small (venekahlice), tip 10x12 mm, length 140

1 Bone cutting forceps per Luer, curved tip, length 150 mm 1 Bone drill bit for screws 3.5-4.0 2 Metal dish, kidney-shaped 1 Metal dish, round, small, capacity 0.4 l 1 Container lid dim. 298 x 285 x 46 mm 1 Sterilization container box 300 x 274 x 135 1 Container box dim. 243 x 253 x 76 mm

SET FOR SMALL FRAGMENTS

1 Handle for a large knife, length 135 mm

1 Scissors for dissection, slightly curved, length 180 mm 1 Scissors for dissection, slightly curved, length 200 mm 1 Scissors straight, for thread, length 180 mm 1 Scissors straight, stronger jaw, length 170 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 180 mm 1 Needle-holder short, fine, length 130 mm, per Halsey 2 Forceps anatomic, standard, length 180 mm 1 Forceps surgical, standard model, length 180 mm 1 Forceps surgical, short,ekstra large tip, length 145 mm 1 Coagulation forceps, fine, length 160 mm 2 Clamp per Pean, slightly curved, length 140 mm 3 Clamp per Pean, slightly curved, length 160 mm 1 Clamp per Kocher, straight, length 145 mm 1 Clamp per Kocher, straight, length 180 mm

2 Reduction forceps for grasping bones, length 250 mm 2 Reduction forceps for grasping bones, length 160 mm

1 Bone curette (kohlea), round, diameter 6,8 mm, length 170mm

1 Raspatory per Williger, length 160 mm 1 Raspatory flat, tip width 12 mm, length 180 mm 1 Elevation for lifting bones, wider mode, length 180 mm 1 Elevation for lifting bones, narrow mode, length 160 mm 1 Bone hook, single-toothed, sharp (small), length 230 mm 1 Bone hook, single-toothed, sharp (medium), length 230 mm 1 Single-toothed bone hook , sharp, small, length 160-180 mm

Subcostal hook with a narrow tip, length 250 mm, (Cobra shaped)

Subcostal hook, slightly curved, wider blades (35 mm), length 270 mm,(per Homann)

1 Depth gauge for screws 2.7/4.0 mm, screw length up to 60 mm 1 Depth gauge for screws 4.5/6.5 mm, screw length up to 110 mm 1 Screwdriver, hexagonal, for screws 4.5/ 6.5 mm 1 Screwdriver, hexagonal, for screws 3.5/4.0 mm

2 Hooks blunt, double-toothed, length 160 mm 2 Hooks blunt, double-sided, (per Farabeuf), length 120 1 Bone cutting forceps per Luer, curved tip, length 150 mm 1 Bone cutting forceps per Luer, flat tip, length 180 mm 1 Bone drill bit for screws 3.5-4.0 1 Bone drill bit for screws 4.5-6.5 2 Metal dish, kidney-shaped 1 Metal dish, round, small, capacity 0.4 l 1 Universal guide handle for drill, double-sided, 2.5/3.2 1 Universal guide handle for drill, double-sided, 3.2/4.5 2 Tile modelers, large 2 Tile modelers, small 1 Container lid 588 x 285 x 46 mm 1 Sterilization box592 x 274 x 90 mm 1 Wire basket540 x 253 x 64 mm without feet

SPINE SET

1 Handle for a large knife, length 135 mm 1 Handle for a large knife, length 180 mm

1 Scissors for dissection, slightly curved, length 180 mm 1 Scissors for dissection, slightly curved, length 200 mm 1 Scissors straight, for thread, length 180 mm 1 Scissors straight, length 170 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 180 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 200 mm 1 Forceps anatomic, standard, length 180 mm 1 Forceps surgical, standard model, length 180 mm 2 Forceps surgical, short, extra large tip, length 145 mm 1 Coagulation forceps, fine, length 160 mm 1 Coagulation forceps, fine, length 200 mm 1 Clamp per Pean, slightly curved, length 140 mm 1 Clamp per Pean, slightly curved, length 160 mm 1 Clamp per Kocher, straight, length 145 mm 1 Clamp per Kocher, straight, length 180 mm 1 Universal Jacobs key with T handle 1 Bone cutting forceps per Luer, length 180 mm 1 Bone cutting forceps po Adson, length 200 mm 1 Piercer or awl, flat, tip length 7 mm, with a stopper

Chisel, cannulated, with a plastic handle, length 220 mm, width 20 mm

2 Retractors per Cone, bunt tip, length 200 mm

Retractors per Beckmann-Stille, blunt tip, dim. 40 x 40 mm, length 330 mm

1 Pedicular probe 1 Clamp per Kerrison, dim. 90*angle, tip width 1.8 mm 1 Clamp per Kerrison, dim. 90*angle, tip width 3.0 mm 1 Clamp per Kerrison, dim. 90*angle, tip width 5.5 mm 2 Dish kidney-shaped, metal 1 Dish small metal 0.4l 1 Container lid 588 x 285 x 46 mm 1 Sterilization box592 x 274 x 90 mm 1 Wire basket540 x 253 x 64 mm without feet

FIST SET

1 Scissors for dissection, medium, length 180 mm 1 Scissors straight, medium, length180 mm

Scissors for dissection, short, fine tip, length 145 mm, (Baby- Metzenbaum)

1 Scissors, straight, short, tough, length 150 mm 1 Needle-holder short, fine, length 130 mm, per Halsey

Needle-holder short, standard model, length 145 mm, Baumgartner

2 Forceps surgical, fine tip, length 120 mm, per Adson 2 Forceps surgical, standard model, length 130 mm 2 Forceps anatomic, length120 mm, per Adson 1 Forceps anatomic, standard model, length 130 mm 1 Coagulation forceps, fine, length 130 mm

Pean small, fine, slightly curved, length 100 mm Baby- Mosquito

2 Pean slightly curved, wider jaw, length 140 mm, per Kelly 1 Clamp per Kocher, straight, length 140 mm, Baby-Crile

Bone curette (kohlea), elongated tip, diameter 3,4 mm, length 170mm

1 Raspatory per Williger, length 160 mm

Raspatory- periostea elevation, blade around the entire edge, width 6 mm, length 190 mm

Raspatory- periostea elevation, slightly curved blade, flat tip, width 3 mm

1 sharp bone hook, length 155 mm 1 sharp bone hook, medium, length 230 mm do 200 mm

Subcostal hook with a slender tip, tip width 8 mm, length 160

1 Depth gauge for screws 2.7/4.0 mm, screw gauge up to 60 mm 1 Screwdriver, hexagonal, for screws 3.5/4.0 mm 2 Hooks blunt, double-toothed, length 160 mm 2 Hooks blunt, double-sided, (per Farabeuf), length 120

Hooks blunt, small (venekahlice), tip 10x12 mm, length 140

1 Bone cutting forceps per Luer, curved tip, length 150 mm 1 Retractors per Cone, blunt tip, length do 120 mm 1 Bone drill bit for screws 3.5-4.0 1 Hammer, small weight 300 g 1 Chisel for osteotomy, flat, width 10 mm, length 150 mm 2 Metal dish, kidney-shaped 1 Metal dish, round, small, capacity 0.4 l 1 Container lid dim. 298 x 285 x 46 mm 1 Sterilization container box 300 x 274 x 135

1 Container box dim. 243 x 253 x 76 mm

PELVIS SET

1 Handle for a large knife, length 135 mm 1 Handle for a large knife, length 220 mm 1 Scissors for dissection, slightly curved, length 180 mm 1 Scissors for dissection, slightly curved, length 200 mm 1 Scissors for dissection, slightly curved, length 230 mm 1 Scissors straight, for thread, length 180 mm 1 Scissors straight, stronger jaw, length 170 mm 2 Forceps anatomic, standard, length 180 mm 2 Forceps anatomic, standard, length 230 mm 1 Coagulation forceps, fine, length 160 mm 1 Coagulation forceps, fine, length 200 mm length 250 mm

2 Forceps surgical, standard model, length 200 mm 2 Forceps surgical, short, extra large tip, length 145 mm 2 Clamp per Kocher, straight, length 200 mm 1 Clamp per Kocher, straight, length 245 mm 2 Clamp per Pean, slightly curved, length 140 mm 3 Clamp per Pean, slightly curved, length 160 mm 3 Clamp per Pean, slightly curved, length 200 mm 2 Hook per Richardson, blunt, blades 65 x 41 mm, length 250 mm

Hook per Korte, blunt, four-toothed, for muscle, dim. 45 x 55 mm, length 230 mm

Hook per Mathie, blunt on both sides, in pair, dim. 37/45 x 25

2 Hook per Kocher, blunt, blade dim. 80 x 60 mm, length 250 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 180 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 200 mm 1 Needle-holder, standard, tip diameter 0.5, flat, length 240 mm 1 Acetab capsule clamp, granulated tip, length 220 mm 1 sharp spoon, kohlea, round, diameter 7 mm, length 250mm 1 sharp spoon, kohlea, round, diameter 4 mm, length 250mm 1 Bone hook, single-toothed, sharp (medium), length 230 mm 1 Raspatory for periostea, flat, width 12 mm, length 160 mm 1 Elevation for lifting bones, wider mode, length 160 mm 2 Reduction forceps for grasping bones, length 250 mm

Bone lever, wider blades (60 mm), length 250 mm per Langebeck

Bone lever, slightly curved, wider blades (35 mm), length 270 mm per Homann

2 Bone lever with a narrow tip, length 250 mm (Cobra)

1 Chisel flat, steel, tip length 12 mm, length 200 mm 1 Chisel flat, steel, tip length 20 mm, length 200 mm 1 Hammer, metal, strong, weight 700 g, length 220 mm 1 Screwdriver, hexagonal, for screws 4.5 and 6.5 mm 1 Depth gauge, larger, for screws 4.5 and 6.5 mm 1 Guide handle, double drilling, for drill size. 3.2 i 4.5 mm

Bone cutting forceps, curved, wider jaw, length 200 mm, per Luer

2 Nail Steinmann with wings

Bone cutting forceps, curved, narrower jaw, length 200 mm, per Luer

2 metal dish, kidney-shaped, length 250 mm 1 metal dish, capacity 0,4l 1 Container lid 588 x 285 x 46 mm 1 Sterilization box592 x 274 x 135 mm 1 Wire basket540 x 253 x 76 mm without feet

EXTERNAL FIXATOR

1 Key for external fixator Ø 11,0 mm, cannulated 1 Key, hexagonal, combined Ø 11,0 mm 1 Guide holder 1 Guide handle for drill 6.0/5.0, short threaded, serrated 1 Inner guide handle Ø 5.0, for drill Ø 3.5, short 1 Trocar Ø 3.5 mm, short 1 Guide handle for drill 8.0/6.0, long threaded, serrated 1 Guide handle 6.0/5.0 threaded 1 Inner guide handle Ø 5.0, for drill Ø 3.5, long 1 Trocar Ø 3.5 mm, long 1 Universal key with T handle 1 Container lid 588 x 285 x 46 mm 1 Sterilization box592 x 274 x 90 mm 1 Wire basket540 x 253 x 64 mm without feet

EXTERNAL FIXSATER-DISTAL RADIUS

Parallel guide handle for drill, Ø 4.0 mm, for external fixation of the distal radius

Screwdriver hexagonal, large, Ø 3.5 mm, cannulated, length 240

1 Sterilization container box 310 x 132 x 57 mm 1 Container lid for sterilization perforated

CANNULATED SCREW- TITANIUM Ø 7.0 mm 1 Handle for a large knife, 135 mm 1 Scissors for dissection, slightly curved, standard, length 180 mm 1 Scissors straight, standard, length 180 mm 1 Forceps anatomic, standard, length 180 mm 1 Forceps surgical, standard, length 180 mm 1 Needle-holder, standard, length 180 mm

Clamp for washing of the operating field per Duval, length 250

2 Hooks blunt, blades 28 x 16 mm, length 210 mm 1 Clamp per Pean, length 160 mm 4 Kirchner threaded spoon, Ø 2.0 mm, length 230 mm 1 Cannulated screws gauge Ø 7.0 mm 1 Hole drill bit for screw tip, cannulated with T handle

Drill Ø 4.5/2.1 mm, cannulated, calibrated, length 230/210 mm for fast coupling

1 Screwdriver attachment for clamping screws

Screwdriver hexagonal, cannulated for cannulated screws Ø 7.0

1 Parallel guide handle Ø 4.5, for cannulated screws Ø 7.0 mm

Guide handle (protective basin) 11.0/Ø 8.0 mm, for percutaneous placement of the cannulated screw

Guide handle for drill 8.0/Ø 4.5 , for percutaneous placement of the cannulated screw Ø 7.0 mm

Inner guide handle Ø 4.5/2.0 mm, for percutaneous placement of the cannulated screw Ø 7.0 mm

Trocar Ø 2.0 mm , for percutaneous placement of the cannulated screw

Container for titanium screw Ø 7.0 mm, screw length 30-120

1 Dish metal, kidney-shaped 1 Dish small, metal, capacity 0,4 l 1 Container lid 588 x 285 x 46 mm 1 Sterilization box592 x 274 x 90 mm 1 Wire basket540 x 253 x 64 mm without feet

LCP 3.5 mm INSTRUMENTARIUM 4 LCP guide handle for drill, 3.5 mm, for drill 2.8 mm 1 Double bone guide handle, for drill 3.5/2.5 mm 1 Double plate guide handle, for drill2.5/3.5 mm 2 Tile benders 2.7/3.5 mm 1 Handle with fast coupling for the moment key attachment 1 Moment key, 1.5 Nm, for fast coupling 1 Screwdriver hexagonal small, Ø 2.5 mm, cannulated 1 Screwdriver attachment for clamping screws 2 Drill for cortical screws, Ø 2.5 mm, short 110/85 mm 2 Drill for cortical screws, Ø 2.5 mm, long 180/155 mm 2 Drill for locking screws Ø 2.8 mm, calibrated, length 165 mm 1 Attachment for screwdriver hexagonal, small, Ø 2.5 mm 1 Gauge for screws 2.7/4.0 mm, screws length up to 60 mm 1 Sterilization container box 310 x 132 x 57 mm 1 Container lid for sterilization perforated

LCP 4.5/5.0 mm INSTRUMENTS 4 LCP guide handle Ø 5.0 mm , for drill Ø 4.3 mm 1 Double bone guide handle 3.2/4.5

1 Universal LCP guide handle for drill 4.5/3.2 1 Moment key, screwdriver for locking screws Ø 5.0 mm

Screwdriver hexagonal large, for screws Ø 4.5/5.0 mm cannulated

1 Attachment for screwdriver for clamping screws 2 Drill long, calibrated, Ø 4.3 mm, for fast coupling 1 Gauge for screws Ø 4.5/6.5 mm hexagonal 1 Sterilization container box 310 x 132 x 57 mm 1 Container lid for sterilization perforated

SET FOR EXTRACTION OF BROKEN SCREW

1 Body of a screwdriver T25 100 mm 1 Milling machine for removal of 5.0 and 7.0 mm screws 1 Milling machine tube, for removal of 5.0 and 7.0 mm screws 1 Extraction wedge for 6.0 and 7.0 mm screws 1 Milling machine for removal of a 4.5 mm screw 1 Milling machine tube, for removal of 4.5 mm screws 1 Extraction wedge for 4.5 and 5.0 mm screws 1 Conical extractor for screws 2.7 and 4.0 mm 1 Screw for extraction conical 1 Extractor for screws 4.5-6.5 mm 1 T-handle with fast coupling 1 Thread cutter for screws 1.5 mm 50/20 mm 1 Body of a screwdriver 100 mm HEX. HEAD 1 Milling machine for removal of 3.5 and 4.0 screws 1 Milling machine tube for removal of 3.5 and 4.0 mm screws 1 Extraction wedge for 3.5 and 4.0 mm screws 1 Body of a screwdriver 2.5 mm hexagonal 1 Drill bit for screws 3.5 mm 1 Screwdriver hexagonal, large 3.5 mm

Traumatological surgical set 1 Drill with accompanying attachments and saw 2 Surgical scissors 2 Needle-holder 2 Forceps anatomic 4 2-pean medium 3 Kohlea 4 Hooks per Homan (blunt and sharp) 3 spoon forceps (larger, medium and smaller) 2 cerclage tensioners 2 guide handles for cerclage 2 luer (smaller and larger) 3 chisels (smaller, medium and larger) 3 Raspatory (larger, medium and smaller) 2 one-toothed hooks 2 double-toothed hooks

6 bone forceps (smaller, medium and larger) 1 large femoral distractor 2 drill bits 2.5 2 drill bits 3.2 2 drill bits 4.5 small KFI instruments (forceps for one-toothed bones, pharabecku, one-toothed hooks,..)

10 Outer fixator (couplings double) 30 Outer fixator (open coupling) 10 Outer fixator (Shanz screw, dia. 4.5x170mm) 10 Outer fixator (Shanz screw, dia. 4.5x200mm) 10 Outer fixator (Shanz screw, dia. 4.5x250mm) 10 Outer fixator (tubes 200mmx11) 10 Outer fixator (tubes 300mmx11) 10 Outer fixator (tubes 3500mmx11) 1 dish clamp

“End of Technical Exhibit A”

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 29-JAN-2021 1 GENERAL HOSPITAL KARLOVAC

MARTINA BOGUT BARIC

3 ANDRIJE TAMPARA STREET

KARLOVAC 47000

385 1 4607 649 FOB: Destination

W91FVL

CLAUSES INCORPORATED BY REFERENCE

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

ADDENDUM TO FAR 52.212-4

Amend Paragraph 52.212-4(a) to include - The contractor shall provide the following, and by returning a signed copy of your quote, the contractor affirms that its quote meets the six (6) iteMs:

(1) Two paper copies and one electronic copy of Operator's Manual in Croatian and English.

(2) Two paper copies and one electronic copy of Maintenance Manual in Croatian and English.

(3) Display and control labels shall be in Croatian or English.

(4) A Statement from vendor of the warranty terms and conditions in English.

(5) The delivered equipment shall be new and not a used or re-manufactured product.

(6) Statement from Vendor that the Equipment possesses or meets Croatian Agency for Medicinal Product and Medical Devices requirements.

Add paragraph 52.212-4(w) - The non-FAR Part 12 discretionary FAR, DFARS, AFARS, and LOCAL clauses included herein are incorporated into this contract either by reference or in full text. If incorporated by reference, see clause 52.252-2 herein for locations where full text can be found.

Add paragraph 52.212-4(x) - SHARP - Advisory publications Army Regulation 600-20, Army Command Policy, 6 November 2014.

OTSG/MEDCOM Policy Memo 19-019, Policy for Reporting Incidents of Sexual Assault and Sexual Harassment under the Sexual Assault Prevention and Reponses Program (SHARP), 21 Mar 2019.

“End of Addendum to FAR 52.212-4”

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

AUG 2020

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment

JUN 2020

52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2020 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.225-14 Inconsistency Between English Version And Translation Of

Contract

FEB 2000

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.233-1 Disputes MAY 2014 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.225-7041 Correspondence in English JUN 1997 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7008 Assignment of Claims (Overseas) JUN 1997 252.232-7010 Levies on Contract Payments DEC 2006 252.233-7001 Choice of Law (Overseas) JUN 1997

CLAUSES INCORPORATED BY FULL TEXT

52.222-50 COMBATING TRAFFICKING IN PERSONS (OCT 2020) ALTERNATE I (MAR 2015)

(a) Definitions. As used in this clause—

“Agent” means any individual, including a director, an officer, an employee, or an independent contractor, authorized to act on behalf of the organization.

“Coercion” means—

(1) Threats of serious harm to or physical restraint against any person;

(2) Any scheme, plan, or pattern intended to cause a person to believe that failure to perform an act would result in serious harm to or physical restraint against any person; or

(3) The abuse or threatened abuse of the legal process.

“Commercial sex act” means any sex act on account of which anything of value is given to or received by any person.

“Commercially available off-the-shelf (COTS) item” means--

(1) Any item of supply (including construction material) that is—

(i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Debt bondage” means the status or condition of a debtor arising from a pledge by the debtor of his or her personal services or of those of a person under his or her control as a security for debt, if the value of those services as reasonably assessed is not applied toward the liquidation of the debt or the length and nature of those services are not respectively limited and defined.

“Employee” means an employee of the Contractor directly engaged in the performance of work under the contract who has other than a minimal impact or involvement in contract performance.

“Forced labor” means knowingly providing or obtaining the labor or services of a person—

(1) By threats of serious harm to, or physical restraint against, that person or another person;

(2) By means of any scheme, plan, or pattern intended to cause the person to believe that, if the person did not perform such labor or services, that person or another person would suffer serious harm or physical restraint; or

(3) By means of the abuse or threatened abuse of law or the legal process.

“Involuntary servitude” includes a condition of servitude induced by means of—

(1) Any scheme, plan, or pattern intended to cause a person to believe that, if the person did not enter into or continue in such conditions, that person or another person would suffer serious harm or physical restraint; or

(2) The abuse or threatened abuse of the legal process.

“Recruitment fees” means fees of any type, including charges, costs, assessments, or other financial obligations, that are associated with the recruiting process, regardless of the time, manner, or location of imposition or collection of the fee.

(1) Recruitment fees include, but are not limited to, the following fees (when they are associated with the recruiting process) for--

(i) Soliciting, identifying, considering, interviewing, referring, retaining, transferring, selecting, training, providing orientation to, skills testing, recommending, or placing employees or potential employees;

(ii) Advertising;

(iii) Obtaining permanent or temporary labor certification, including any associated fees;

(iv) Processing applications and petitions;

(v) Acquiring visas, including any associated fees;

(vi) Acquiring photographs and identity or immigration documents, such as passports, including any associated fees;

(vii) Accessing the job opportunity, including required medical examinations and immunizations; background, reference, and security clearance checks and examinations; and additional certifications;

(viii) An employer's recruiters, agents or attorneys, or other notary or legal fees;

(ix) Language interpretation or translation, arranging for or accompanying on travel, or providing other advice to employees or potential employees;

(x) Government-mandated fees, such as border crossing fees, levies, or worker welfare funds;

(xi) Transportation and subsistence costs--

(A) While in transit, including, but not limited to, airfare or costs of other modes of transportation, terminal fees, and travel taxes associated with travel from the country of origin to the country of performance and the return journey upon the end of employment; and

(B) From the airport or disembarkation point to the worksite;

(xii) Security deposits, bonds, and insurance; and

(xiii) Equipment charges.

(2) A recruitment fee, as described in the introductory text of this definition, is a recruitment fee, regardless of whether the payment is--

(i) Paid in property or money;

(ii) Deducted from wages;

(iii) Paid back in wage or benefit concessions;

(iv) Paid back as a kickback, bribe, in-kind payment, free labor, tip, or tribute; or

(v) Collected by an employer or a third party, whether licensed or unlicensed, including, but not limited to--

(A) Agents;

(B) Labor brokers;

(C) Recruiters;

(D) Staffing firms (including private employment and placement firms);

(E) Subsidiaries/affiliates of the employer;

(F) Any agent or employee of such entities; and

(G) Subcontractors at all tiers.

“Severe forms of trafficking in persons” means—

(1) Sex trafficking in which a commercial sex act is induced by force, fraud, or coercion, or in which the person induced to perform such act has not attained 18 years of age; or

(2) The recruitment, harboring, transportation, provision, or obtaining of a person for labor or services, through the use of force, fraud, or coercion for the purpose of subjection to involuntary servitude, peonage, debt bondage, or slavery.

“Sex trafficking” means the recruitment, harboring, transportation, provision, or obtaining of a person for the purpose of a commercial sex act.

“Subcontract” means any contract entered into by a subcontractor to furnish supplies or services for performance of a prime contract or a subcontract.

“Subcontractor” means any supplier, distributor, vendor, or firm that furnishes supplies or services to or for a prime contractor or another subcontractor.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Policy. The United States Government has adopted a policy prohibiting trafficking in persons including the trafficking-related activities of this clause. Contractors, contractor employees, and their agents shall not—

(1) Engage in severe forms of trafficking in persons during the period of performance of the contract;

(2) Procure commercial sex acts during the period of performance of the contract;

(3) Use forced labor in the performance of the contract;

(4) Destroy, conceal, confiscate, or otherwise deny access by an employee to the employee's identity or immigration documents, such as passports or drivers' licenses, regardless of issuing authority;

(5)(i) Use misleading or fraudulent practices during the recruitment of employees or offering of employment, such as failing to disclose, in a format and language understood by the employee or potential employee, basic information or making material misrepresentations during the recruitment of employees regarding the key terms and conditions of employment, including wages and fringe benefits, the location of work, the living conditions, housing and associated costs (if employer or agent provided or arranged), any significant costs to be charged to the employee or potential employee, and, if applicable, the hazardous nature of the work;

(ii) Use recruiters that do not comply with local labor laws of the country in which the recruiting takes place;

(6) Charge employees and potential employees recruitment fees;

(7)(i) Fail to provide return transportation or pay for the cost of return transportation upon the end of employment--

(A) For an employee who is not a national of the country in which the work is taking place and who was brought into that country for the purpose of working on a U.S. Government contract or subcontract (for portions of contracts performed outside the United States); or

(B) For an employee who is not a United States national and who was brought into the United States for the purpose of working on a U.S. Government contract or subcontract, if the payment of such costs is required under existing temporary worker programs or pursuant to a written agreement with the employee (for portions of contracts performed inside the United States); except that--

(ii) The requirements of paragraphs (b)(7)(i) of this clause shall not apply to an employee who is--

(B) Exempted by an authorized official of the contracting agency from the requirement to provide return transportation or pay for the cost of return transportation;

(iii) The requirements of paragraph (b)(7)(i) of this clause are modified for a victim of trafficking in persons who is seeking victim services or legal redress in the country of employment, or for a witness in an enforcement action related to trafficking in persons. The contractor shall provide the return transportation or pay the cost of return transportation in a way that does not obstruct the victim services, legal redress, or witness activity. For example, the contractor shall not only offer return transportation to a witness at a time when the witness is still needed to testify.

This paragraph does not apply when the exemptions at paragraph (b)(7)(ii) of this clause apply.

(8) Provide or arrange housing that fails to meet the host country housing and safety standards; or

(9) If required by law or contract, fail to provide an employment contract, recruitment agreement, or other required work document in writing. Such written work document shall be in a language the employee understands. If the employee must relocate to perform the work, the work document shall be provided to the employee at least five days prior to the employee relocating. The employee's work document shall include, but is not limited to, details about work description, wages, prohibition on charging recruitment fees, work location(s), living accommodations and associated costs, time off, roundtrip transportation arrangements, grievance process, and the content of applicable laws and regulations that prohibit trafficking in persons.

(c) Contractor requirements. The Contractor shall—

(1) Notify its employees of—

(i) (A) The United States Government's policy prohibiting trafficking in persons described in paragraph (b) of this clause; and

(B) The following directive(s) or notice(s) applicable to employees performing work at the contract place(s) of performance as indicated below:

Document Title: Army in Europe Circular 190-24 Consolidated List of Off-Limits Areas, Establishments, Firms, Individuals, and Organizations

Document may be obtained from: https://media.defense.gov/2019/Mar/07/2002097126/-1/-1/0/AEC190-24.PDF

Applies to performance in the United States European Command area of responsibility.

(ii) The actions that will be taken against employees or agents for violations of this policy. Such actions for employees may include, but are not limited to, removal from the contract, reduction in benefits, or termination of employment; and

(2) Take appropriate action, up to and including termination, against employees, agents, or subcontractors that violate the policy in paragraph (b) of this clause.

(d) Notification. (1) The Contractor shall inform the Contracting Officer and the agency Inspector General immediately of—

(i) Any credible information it receives from any source (including host country law enforcement) that alleges a Contractor employee, subcontractor, subcontractor employee, or their agent has engaged in conduct that violates the policy in paragraph (b) of this clause (see also 18 U.S.C. 1351, Fraud in Foreign Labor Contracting, and 52.203- 13(b)(3)(i)(A), if that clause is included in the solicitation or contract, which requires disclosure to the agency Office of the Inspector General when the Contractor has credible evidence of fraud); and

(ii) Any actions taken against a Contractor employee, subcontractor, subcontractor employee, or their agent pursuant to this clause.

(2) If the allegation may be associated with more than one contract, the Contractor shall inform the contracting officer for the contract with the highest dollar value.

(e) Remedies. In addition to other remedies available to the Government, the Contractor's failure to comply with the requirements of paragraphs (c), (d), (g), (h), or (i) of this clause may result in—

(1) Requiring the Contractor to remove a Contractor employee or employees from the performance of the contract;

(2) Requiring the Contractor to terminate a subcontract;

(3) Suspension of contract payments until the Contractor has taken appropriate remedial action;

(4) Loss of award fee, consistent with the award fee plan, for the performance period in which the Government determined Contractor non-compliance;

(5) Declining to exercise available options under the contract;

(6) Termination of the contract for default or cause, in accordance with the termination clause of this contract; or

(7) Suspension or debarment.

(f) Mitigating and aggravating factors. When determining remedies, the Contracting Officer may consider the following:

(1) Mitigating factors. The Contractor had a Trafficking in Persons compliance plan or an awareness program at the time of the violation, was in compliance with the plan, and has taken appropriate remedial actions for the violation, that may include reparation to victims for such violations.

(2) Aggravating factors. The Contractor failed to abate an alleged violation or enforce the requirements of a compliance plan, when directed by the Contracting Officer to do so.

(g) Full cooperation.

(1) The Contractor shall, at a minimum—

(i) Disclose to the agency Inspector General information sufficient to identify the nature and extent of an offense and the individuals responsible for the conduct;

(ii) Provide timely and complete responses to Government auditors' and investigators' requests for documents;

(iii) Cooperate fully in providing reasonable access to its facilities and staff (both inside and outside the U.S.) to allow contracting agencies and other responsible Federal agencies to conduct audits, investigations, or other actions to ascertain compliance with the Trafficking Victims Protection Act of 2000 (22 U.S.C. chapter 78), E.O. 13627, or any other applicable law or regulation establishing restrictions on trafficking in persons, the procurement of commercial sex acts, or the use of forced labor; and

(iv) Protect all employees suspected of being victims of or witnesses to prohibited activities, prior to returning to the country from which the employee was recruited, and shall not prevent or hinder the ability of these employees from cooperating fully with Government authorities.

(2) The requirement for full cooperation does not foreclose any Contractor rights arising in law, the FAR, or the terms of the contract. It does not—

(i) Require the Contractor to waive its attorney-client privilege or the protections afforded by the attorney work product doctrine;

(ii) Require any officer, director, owner, employee, or agent of the Contractor, including a sole proprietor, to waive his or her attorney client privilege or Fifth Amendment rights; or

(iii) Restrict the Contractor from—

(A) Conducting an internal investigation; or

(B) Defending a proceeding or dispute arising under the contract or related to a potential or disclosed violation.

(h) Compliance plan.

(1) This paragraph (h) applies to any portion of the contract that—

(i) Is for supplies, other than commercially available off-the-shelf items, acquired outside the United States, or services to be performed outside the United States; and

(ii) Has an estimated value that exceeds $550,000.

(2) The Contractor shall maintain a compliance plan during the performance of the contract that is appropriate—

(i) To the size and complexity of the contract; and

(ii) To the nature and scope of the activities to be performed for the Government, including the number of non- United States citizens expected to be employed and the risk that the contract or subcontract will involve services or supplies susceptible to trafficking in persons.

(3) Minimum requirements. The compliance plan must include, at a minimum, the following:

(i) An awareness program to inform contractor employees about the Government's policy prohibiting trafficking-related activities described in paragraph (b) of this clause, the activities prohibited, and the actions that will be taken against the employee for violations. Additional information about Trafficking in Persons and examples of awareness programs can be found at the Web site for the Department of State's Office to Monitor and Combat Trafficking in Persons at http://www.state.gov/j/tip/.

(ii) A process for employees to report, without fear of retaliation, activity inconsistent with the policy prohibiting trafficking in persons, including a means to make available to all employees and potential employees the hotline phone number of the Global Human Trafficking Hotline at 1-844-888-FREE and its email address at help@befree.org.

(iii) A recruitment and wage plan that only permits the use of recruitment companies with trained employees, prohibits charging recruitment fees to the employee or potential employee, and ensures that wages meet applicable host-country legal requirements or explains any variance.

(iv) A housing plan, if the Contractor or subcontractor intends to provide or arrange housing, that ensures that the housing meets host-country housing and safety standards.

(v) Procedures to prevent agents and subcontractors at any tier and at any dollar value from engaging in trafficking in persons (including activities in paragraph (b) of this clause) and to monitor, detect, and terminate any agents, subcontracts, or subcontractor employees that have engaged in such activities.

(4) Posting.

(i) The Contractor shall post the relevant contents of the compliance plan, no later than the initiation of contract performance, at the workplace (unless the work is to be performed in the field or not in a fixed location) and on the Contractor's Web site (if one is maintained). If posting at the workplace or on the Web site is impracticable, the Contractor shall provide the relevant contents of the compliance plan to each worker in writing.

(ii) The Contractor shall provide the compliance plan to the Contracting Officer upon request.

(5) Certification. Annually after receiving an award, the Contractor shall submit a certification to the Contracting Officer that—

(i) It has implemented a compliance plan to prevent any prohibited activities identified at paragraph (b) of this clause and to monitor, detect, and terminate any agent, subcontract or subcontractor employee engaging in prohibited activities; and

(ii) After having conducted due diligence, either—

(A) To the best of the Contractor's knowledge and belief, neither it nor any of its agents, subcontractors, or their agents is engaged in any such activities; or

(B) If abuses relating to any of the prohibited activities identified in paragraph (b) of this clause have been found, the Contractor or subcontractor has taken the appropriate remedial and referral actions.

(i) Subcontracts.

(1) The Contractor shall include the substance of this clause, including this paragraph (i), in all subcontracts and in all contracts with agents. The requirements in paragraph (h) of this clause apply only to any portion of the subcontract that—

(i) Is for supplies, other than commercially available off-the-shelf items, acquired outside the United States, or services to be performed outside the United States; and

(ii) Has an estimated value that exceeds $550,000.

(2) If any subcontractor is required by this clause to submit a certification, the Contractor shall require submission prior to the award of the subcontract and annually thereafter. The certification shall cover the items in paragraph (h)(5) of this clause.

(End of clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DoD FAR Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (DEC 2019)

(a) Definitions. As used in this clause--

Adequate security means protective measures that are commensurate with the consequences and probability of loss, misuse, or unauthorized access to, or modification of information.

Compromise means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

Contractor attributional/proprietary information means information that identifies the contractor(s), whether directly or indirectly, by the grouping of information that can be traced back to the contractor(s) (e.g., program description, facility locations), personally identifiable information, as well as trade secrets, commercial or financial information, or other commercially sensitive information that is not customarily shared outside of the company.

Controlled technical information means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination.

Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD…