A21_Amendment_0001_W90WL5-17-T-0011.pdf

W67G227096007G

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Change in quantity to reflect 20 containers per w eek.

A: Paragraph 4.0 in the Statement of Work has been revised from ten (10) containers per w eek to tw enty (20) containers per w eek.

B: Solicitation period is extended to Wednesday, July 5th, 2017 by 11:00 AM.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 29-Jun-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W90WL5-17-T-0011

X 9B. DATED (SEE ITEM 11)

15-Jun-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

29-Jun-2017

CODE

TOOELE ARMY DEPOT

CONTRACTING OFFICE CCRC-IDT

1 TOOELE ARMY DEPOT BLDG 501

TOOELE UT 84074-5000

W90WL5 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W90WL5-17-T-0011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 27-Jun-2017 11:00 AM to 05-Jul-2017 11:00 AM.

The following have been modified:

STATEMENT OF WORK

Performance Work Statement Certified Weld Inspection for One-Metric Ton Containers

1.0 General

This is a non-personnel services contract to provide Certified Weld Inspections for One- Metric Ton Containers. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform Certified Weld Inspection for One-Metric Ton Containers as defined in this Performance Work Statement (PWS). The contractor shall perform to the standards in this contract.

2.0 Project Background

Tooele Army Depot (TEAD) is manufacturing a minimum of three hundred (300) one-metric ton containers and a necessary step in the manufacturing process is certified weld inspection. TEAD currently requires this process be outsourced. See attached literature for schematics and pictures of the one-metric ton container.

3.0 Requirements

Contractor and all associated sub-contractor’s employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

The contractor shall furnish all services, materials, supplies, and labor required to perform the Certified Weld Inspection for One-Metric Ton Containers.

The inspector shall be certified Nondestructive Examination (NDE) Level II or Level III.

All welding inspection and/or visual inspection shall performed by personnel certified in accordance with AWS D1.1 and AWS QC1 as minimum of CWI (Certified Welding Inspector).

The inspector shall submit NDE examiner certification records as well as eye exams in accordance with the American Welding Society (AWS) D1.1, Section 6.1.4.4 within 7-10 days of contract award and prior to performing inspections. Failure to do so could result in delay in contract payments or cancellation of the contract.

The contractor shall be capable of performing weld inspections for the one-metric ton containers at TEAD.

The CWI shall perform visual inspection of one hundred percent (100%) of each container’s welds in accordance with AWS D1.1, Table 6.1, for Statically Loaded Connections.

The contracted inspector shall complete a weld examination report and those portions of the Shop Operations Traveler associated to their inspections.

The contractor shall develop and maintain an effective quality control program to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract.

The certifying procedures and contractor inspection and quality program shall be developed by a Level III CWI. Certifying procedures for non-destructive examination (NDE) equipment, operators and inspection and quality procedures shall be performed in accordance with Paragraph E-6, MSSP-28 Rev 3, dated June 26, 2103, as well as applicable Industry Standards and this PWS.

4.0 Project Schedule

Twenty (20) one-metric ton containers will be welded per week, until a minimum of three hundred (300) are completed. There will be some weeks where the quantity varies.

Contractor must be capable of inspecting from zero (0) containers to forty (40) containers in a given week. Tooele Army Depot’s work week is Monday through Thursday 7am- 5pm. Friday’s will be utilized for overtime as needed. Weekly coordination will be made with the contractor for Friday’s work schedule.

5.0 Specific Tasks

5.1. Weld Inspection

The CWI shall verify that the filler metal is the correct controlled material, and that required certifications, etc. are present.

Special attention shall be given to thorough final examination of all completed welds.

Visual examinations for all steels may begin immediately after the completed welds have cooled to ambient temperature.

A CWI (Certified Weld Inspector) shall visually inspect 100% of each weld. Each pass of welding shall be inspected and accepted before the next pass of weld is applied.

The CWI shall inspect: the half couple weld; all tack bead welds; all body joint root welds, all body joint welds, all hex nut tack beads, all channel tack welds, all channel welds.

5.2 Documentation

The contractor shall certify that each container has been 100% visually inspected in the Shop Operations Traveler.

The inspector will complete inspection reports on a daily basis and submit them to TEAD by the start of the next working day.

5.3 Total Quantity of Containers

Contractor shall weld inspect a minimum of ten (10) one-metric ton containers and up to three hundred twenty (320) one-metric ton containers. (The additional inspections above 300 are in case re-inspection of containers is required due to quality defects, etc.).

5.4 Reporting

Contractor shall register with the Contract Manpower Reporting Application (CMRA), and submit all required reports to the Contract Manpower Reporting Application (CMRA), including the end of project report. Failure to do so may result in delay of acceptance and payment of associated invoices.

6.0 Quality Control

The Contractor shall ensure that all services and products provided to fulfill this Task Order, including work performed by subcontractors, are at or above the levels of quality required by the base contract under which this Task Order is written.

7.0 Attachments/Technical Exhibits

7.1 One-Metric Ton Container Technical Drawing

(End of Summary of Changes)