Application_Specifics_-_Fixture_Product_Data.pdf

2AV 2'x4' Linear Fluorescent

T8 1, 2 or 3 lamps

FEATURES & SPECIFICATIONS

INTENDED USE

The Avante 2x4 is a general lighting luminaire for large spaces including open offices, circulation areas, classrooms, libraries, cafeterias, airport tick-eting and wait areas, and numerous other commercial applications. Static or air functions available. Certain airborne contaminants can diminish in-tegrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION

Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.

All shieldings pivot on light traps and swing down for easy lamp access.

Molded light traps prevent light leaks between shielding and endplates.

All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.

OPTICAL SYSTEM

Twin matte white polyester powder paint finished reflectors provide uniform light distribution. Optional low brightness diffuse aluminum stepped reflectors available.

All diffusers control direct light distribution and glare by shielding lamps from direct view.

Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes backed with white acrylic diffuser.

Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered center. Sides and louver backed with white acrylic diffuser.

Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser.

Acrylic diffuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic diffuser.

Metal diffuser with center slots (MDC). 52% open metal, .075" diameter holes with 1" wide solid center. Slotted with 1/2"x2" open slots. Diffuser is backed with white acrylic overlay.

ELECTRICAL SYSTEM

All ballasts supplied are class P, thermally protected, resetting, HPF, non- PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combi-nations conform to UL 935.

INSTALLATION

Trims available for standard 1" and 9/16" tee bar or screw slot grids.

Fixtures can be row mounted end-to-end.

Drywall ceiling adapters available.

NOTES:

1 Refer to options and accessories section for more detailed information.

2 MVOLT (120 - 277 volt).

3 Must specify voltage, 120 or 277.

4 SIMPLY5 system includes 13' S5SSC RELOC wiring system. Specify voltage unless HW (hardwire) or PWS1836 is ordered.

Specifications

Length: 48" (1219) Width: 24" (602) Diffuser Width: 8" (203) Depth: 5-1/2" (140)

Sheet #: 2AV 2X4 T8 ARCH-280

All dimensions are inches (millimeters).

LISTING

UL Listed to US and Canadian safety standards. Chicago Plenum approved and NYC approved (see Options).

Specifications are subject to change without notice.

Avante is covered by one or more of the following patents: 5,988,829; 399,586;

411,641; 413,402; 2,212,513; 87,513.

Catalog Number

Notes Type

Fluorescent

Lamp type

32 32W T8 (48")

Series

2AV 2' wide

2AV

Trim type

G Grid trim ST Screw slot

Number of lamps

Not included.

Diffuser

MDR Metal diffuser, round holes

SBL Straight blade louver, round holes

MDM Metal diffuser, mini slots ADP Acrylic diffuser, linear prismatic lens MDC Metal diffuser, round holes with large center slots1

Others available.

Voltage

MVOLT2

Others available.

Air function

(blank) Static (no air function) A Air return/supply

Options

GEB10IS Electronic ballast, < 10% THD, instant start

GEB10RS Electronic ballast, < 10% THD, rapid start

S5100 1.0 ballast factor, SIMPLY5™ system4

ALG Acrylic litter guard1

EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety section)

GLR Internal fast-blow fuse3

HW Hardwire for SIMPLY5™ system;

replaces RELOC® wiring

PWS1836 6' prewire, 3/8" dia., 18-gauge, 3 wires

NYC New York City approved CP Chicago Plenum approved

APB Air pattern control blades1

Reflector option ASR Aluminum stepped reflector

Accessories

Order as separate catalog number.

DGA24 Drywall ceiling adapter, unit installation. Use G trim plus DGA accessory for fixture trim flange and fixture support in plaster or plasterboard ceilings.

For shortest lead times, configure product using standard options (shown in bold).

Example: 2AV G 2 32 MDR MVOLT GEB10IS

ORDERING INFORMATION

http://www.acuitybrandslighting.com/Library/LL/documents/specsheets/Acrylic-Compatibility.pdf cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조 cyunk 강조

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

12.3 19.9 34.0 42.2 0.0 42.2

29.2 47.1 80.6

100.0 0.0

100.0

Efficiency: 42.2%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

17.7 29.3 52.9 68.1 0.0 68.1

26.0 43.0 77.7

100.0 0.0

100.0

Efficiency: 68.1%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

17.9 29.6 53.2 68.3 0.0 68.3

26.2 43.3 78.0

100.0 0.0

100.0

Efficiency: 68.3%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

2AV 2x4 Direct/Indirect Lighting 2AV G 2 32 MDR, (2) 32W T8 lamps, 2850 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL 10121

2AV G 3 32 MDR, (3) 32W T8 lamps, 2850 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10155

2AV G 3 32 MDR ASR, (3) 32W T8 lamps, 2850 lumens per lamp, s/m 1.2 (along) 1.3 (across), test no. LTL 10120

Sheet #: 2AV 2X4 T8 ©2007-2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 1/18/10

MOUNTING DATA

*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 48-3/4" (Tolerance is +1/8", -0”).

For additional photometric information, visit our website at 'lithonia.com'.

Appropriate Ceiling Type Trim Type Exposed grid tee (1' and 9/16") G Concealed grid tee G Screw slot ST Plaster or plasterboard G*

Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com

STAGASTG

Screw Slot (screw slot tee)Lay-in trim (exposed grid teeLay-in trim (exposed grid tee Screw slot trim (screw slot tee))