Scope_of_Work_for_Tire_Assembly_-12502073.pdf

Scope of Work Attachment 002 Dated: 10 May 2017 REV 2

1. Background:

The Tire Assembly is part of a mine sweeping device used by the US Army.

Drawing 12502073, Rev A shows the finished item. 12502074, Rev A shows the item the work will be performed to. The drawings are provided.

2. General Contractor Requirements:

Rock Island Arsenal-Joint Manufacturing and Technology Center (RIA JMTC) will supply the mold, part number 487303. The contractor shall provide all tools, equipment, and supplies required to produce the rubber sleeve and perform the assembly on 12502074, Rev A. RIA-JMTC will supply a quantity of 128 each tube, outer sleeves are per drawing 12502074, Rev A. The part will be supplied using Seamless Aluminum Pipe, 8 inch nominal diameter schedule 40 grade 6061-T6. The O.D. will be as stock, the ends will be machined to drawing 12502074, Rev A.

3. Transportation Requirements:

RIA-JMTC shall be responsible for shipping the mold 487303 and the quantity of 128 each tube, outer sleeves, drawing12502074, Rev A to the contractor for the final assembly. The contractor shall be responsible for shipping the mold 12502073-1 and finished parts 12502073 Rev A, in the original shipping containers back to RIA-JMTC once the work is complete.

4. Environmental:

The vendor must follow all applicable environmental, local, state, and federal environmental laws/regulations.

5. Schedule:

The contractor has 45 business days to complete assemblies after 128 each tube, outer sleeves (drawing 12502074 Rev A) are received from RIA-JMTC.

The 45 days includes return shipment to the Government at RIA-JMTC.