3D_Printer_SOW.pdf

SOW-2016-064

Statement of Work for the

Veterans Health Administration (VHA)

3D Printer

28 July 2016

U.S. Army Program Executive Office for

Simulation, Training, and Instrumentation (PEO STRI)

12350 Research Parkway

Orlando, FL 32826-3276

Table of Contents

1. Scope

2. Applicable Documents

3. Requirements

3.1 Procurement of Supplies

3.2 Shipping and Delivery Services

3.3 Program Management

Appendix A Appendix B

1. Scope.

This Statement of Work (SOW) defines the specific requirements for procuring and delivering a 3D printer for the Veterans Health Administration (VHA). This device will be used to print biocompatible models of patient-specific anatomy and surgical tools to train medical professionals on models before surgeries.

2. Applicable Documents.

The following documents form a part of this SOW to the extent specified herein.

None.

3. Requirements.

The Contractor shall fulfill the requirements outlined in this SOW to ensure a successful delivery of a 3D printer to the VHA National Simulation Center (NSC). Appendix A of this SOW includes the 3D printer requirements.

3.1 Procurement of Supplies

The Contractor shall provide the 3D printer for the VHA as specified in Appendix A of this SOW.

3.2 Shipping and Delivery Services.

The Contractor shall ship the 3D printer to the VHA NSC located at 13800 Veterans Way, Building # 13, Orlando, FL 32827-333. The Contractor shall deliver the 3D printer no later than Thirty (30) days after the contract award date. The Contractor, after shipping the 3D printer, shall notify the Program POC and the Facility Logistical Officer listed in Appendix B to inform them their 3D printer has been shipped.

3.3 Program Management.

The Contractor shall provide the overall management necessary to provide the 3D printer for the VHA in accordance with the Appendices of this SOW.

Appendix A

3D Printer Requirements

1. Shall be capable of printing biocompatible models of patient-specific anatomy.

2. Shall be capable of printing rigid and flexible models.

3. Shall be capable of printing models that can be sterilized and used in an operating room.

4. Shall be capable of printing models of multiple materials (e.g. plastic, rubber, etc.).

5. Shall have a build volume of at least: 11.5 x 7.5 x 5.5 cm.

6. Shall have photo-curable resin/polyjet technology.

7. Shall have a printing resolution of at least X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi.

8. Shall be capable of printing models with a thickness layer of 25 µm (microns).

9. Shall be capable of printing surgical instruments.

Appendix B

3D Printer Delivery Information

Program POC Shipping Address Facility Chief Logistics Officer

Facility Name

Name Email Phone Street City State Zip Name Email Phone

NSC

Phil

Hargreaves phil.hargreaves

@va.gov

(407) 531-

13800 Veterans Way Building # 13

Orlando FL 32827 Fletcher Valentine

Fletcher.Valentine @va.gov

(407) 531-