A.09.03_W81K02-18-T-0035_Enclosure1.pdf

W81K02-18-T-0035

Section B - Supplies or Services and Prices

BPA Master Dollar Limit: $300,000.00

BPA Call Limit: $150,000.00

Period of Performance: 01-Feb-2018 to 31-Jan-2023

FSC Codes:

Section C - Descriptions and Specifications

TERMS AND CONDITIONS FOR A BLANKET PURCHASE AGREEMENT (BPA)

BETWEEN

XXXXXXX CONTRACTOR XXXXXXXX

AND

REGIONAL HEALTH CONTRACTING OFFICE -PACIFIC

TRIPLER ARMY MEDICAL CENTER

BLANKET PURCHASE AGREEMENT NO. W81K02-##-A-####

Authority:

In accordance with FAR Subpart 13.303, the subject BPA is established with

XXXX CONTRACTOR XXXXX

Description of Agreement:

The agreement shall be effective for a term of 5 years or NTE $300,000 starting on 01 Feb 2018.

XXX Contractor’s XXX published product descriptions and pricing is attached hereto and incorporated herein by reference. See Attachment 1, XXX Contractor XXX dated XXXXX for current product pricing.

It is the basis for all pricing.

Extent of Obligation:

The vendor’s prices provided at time of award shall be in the awarded BPA. Vendors may submit BPA price revision requests in writing to the Contracting Officer 30 days, at minimum, prior to the proposed effective date. The revised price list, if approved by the Contracting Officer, shall be incorporated into the BPA via a bilateral modification to the BPA. The Government is obligated only to the extent of calls (i.e., orders) placed by Individuals

Authorized to Place Calls and the purchase limitations of this BPA.

Purchase Limitations:

The BPA Master Dollar Limit is $300,000.00 NTE a period of 5 Years and the BPA per call limit is as follows.

BPA Call Limit - $25,000.00 (if placed via Government Purchase Card)

BPA Call Limit - $150, 000.00 (if ordered through the Contracting Office)

BPA Master Dollar Limit - $300,000.00 (for life of Agreement)

Individual(s) Authorized to Place Calls under the BPA:

The Contracting Office will provide the vendor a separate notification of the appointed Individuals Authorized to

Place Calls. All RHCO-P Contracting Officers are also permitted to act as Individuals Authorized to Place Calls.

A call number will be provided by the authorized individual placing the call. Each order under this agreement will be assigned a call code/number. Call numbers will consist of a two-alphabetic position code. The alphabetic position code identifies who is placing the call against the BPA.

Orders will be placed on an as needed basis.

EQUIPMENT as defined herein as a non-expendable item that is maintenance significant and/or property-accountable, regardless of cost, SHALL NOT BE PURCHASED VIA THIS BPA.

Delivery Tickets:

All packing lists (delivery tickets) shall contain the following minimum information:

1. Name of supplier.

2. BPA number.

3. Date of purchase.

4. Call or purchase order number.

5. Name of authorized representative placing the call.

6. Itemized list of supplies furnished.

7. Quantity, unit price, extension of each item, less applicable discounts.

8. Date of delivery or shipment.

PAYMENT INFORMATION:

FOR PAYMENT BY GOVERNMENT PURCHASE CARD

Payment will be by the government purchase card cardholder who is the Individual Authorized to Place Calls.

The billing period shall be from the 20th through the 19th of each month. The firm shall submit itemized invoice(s) for all deliveries made during the billing period to the Individual Authorized to Place Calls in the GPC

Delegation Memo placing the call. These invoices need not be supported by copies of delivery tickets.

A summary invoice shall be submitted at the end of the month for all deliveries made during the billing period.

FOR PAYMENT BY iRAPT

Any calls/transactions that exceed the $25,000.00 per call limit SHALL ONLY BE MADE BY A RHCO-P

Contracting Officer for each required order.

All calls will be issued against the same CAGE code listed on page 1 of the BPA award.

Orders will be placed on an as needed basis.

Contractor shall submit their invoice online via iRAPT for payment; Government receiving/accepting official will be listed in the iRAPT clause.

Please mark all shipments or invoices with BPA number and the Call Number provided by the Individuals

Authorized to Place Calls.

INVOICING INFORMATION

In accordance with FAR 13.303-3(a)(6)(iii):

When billing procedures provide for an individual invoice for each delivery, these invoices shall be accumulated, provided that—

(A) A consolidated payment will be made for each specified period; and

(B) The period of any discounts will commence on the final date of the billing period or on the date of receipt of invoices for all deliveries accepted during the billing period, whichever is later.

Contractor shall submit their invoice online via iRAPT for payment; Government receiving/accepting official will be listed in the iRAPT clause.

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017

ADDENDUM TO 52.212-4

(w) UNILATERAL MODIFICATIONS

In addition to 52.212-4(c), the Government may make unilateral modifications considered administrative in nature.

These include, but are not limited to, changes in the accounting and appropriation data, payment and issuing office addresses, and other corrections that have no effect on the terms and conditions of the contract.

(x) The non-FAR Part 12 discretionary FAR and DFARS clauses included herein are incorporated into this contract either by reference or in full text. If incorporated by reference, see clause 52.252-2 herein for locations where full text can be found.

(y) OTSG/MEDCOM Policy Memo 13-062 Implementation.

The contractor shall comply with OTSG/MEDCOM Policy Memo 13-062, Policy for Reporting Incidents of Sexual

Assault and Sexual Harassment under the Sexual Assault Prevention and Response Program (SHARP), 12 Nov

2013. The SHARP reporting requirements apply only to knowledge obtained by contractor personnel while providing the required supplies under this contract.

All contractor personnel with knowledge of an incident of sexual assault occurring on a Government facility, to include a Government leased facility, where the contractor is providing supplies under this contract shall immediately (within 24 hours) report the incident in writing to the government's contract POC. This reporting policy also applies to sexual assault incidents involving MEDCOM personnel that occur on the contractor’s owned or leased facility under this contract. All incidents shall be reported whether they involve contractor personnel or

Government personnel, or other individuals, when the incidents occur on a Government facility or a Government leased facility.

All contractor personnel with knowledge of an incident of sexual harassment occurring on a Government facility, to include a Government leased facility, where the contractor is providing supplies under this contract shall immediately (within 24 hours) report the incident in writing to the government's contract POC. This reporting policy also applies to sexual harassment incidents involving MEDCOM personnel that occur on the contractor’s owned or leased facility under this contract. All incidents shall be reported whether they involve contractor personnel or Government personnel, or other individuals, when the incidents occur on a Government facility or a

Government leased facility.

The contractor shall ensure contractor personnel associated with this contract receive Sexual Harassment/Assault

Response and Prevention (SHARP) training not later than 60 calendar days after the effective date of this contract.

Training can be obtained either online or in person. If contract individuals have an AKO account, they can access online the Team Bound Self Study course through Army Learning Management System (ALMS) at http://www.atsc.army.mil/tadlp/delivery/alms.asp

Advisory Publications

Army Regulation 600-20, Army Command Policy, 20 Sep 2012

Mandatory Publications

OTSG/MEDCOM Policy Memo 13-062, Policy for Reporting Incidents of Sexual Assault and Sexual Harassment under the Sexual Assault Prevention and Responses Program (SHARP), 12 Nov 2013.

Deliverables due

Sexual Assault Reporting. The contractor will immediately (within 24 hours) submit a written report of an incident of sexual assault to the Government contract POC.

Sexual Harassment Reporting. The contractor will immediately (within 24 hours) submit a written report of an incident of sexual harassment to the Government contract POC.

(z) TAS Reporting For reporting purposes, FAR Clause 52.204-10 Reporting Executive Compensation and First

Tier Subcontract Awards, the Treasury Account Symbol (TAS) is 97 0130.

(End Addendum 52.212-4)

52.203-3 Gratuities APR 1984

52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(Sep 2006) -- Alternate I

OCT 1995

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

OCT 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement

To Inform Employees of Whistleblower Rights

APR 2014

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

OCT 2016

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for

Debarment

OCT 2015

52.222-3 Convict Labor JUN 2003

52.222-19 Child Labor -- Cooperation with Authorities and Remedies OCT 2016

52.222-21 Prohibition Of Segregated Facilities APR 2015

52.222-26 Equal Opportunity SEP 2016

52.222-35 Equal Opportunity for Veterans OCT 2015

52.222-36 Equal Opportunity for Workers with Disabilities JUL 2014

52.222-37 Employment Reports on Veterans FEB 2016 http://www.atsc.army.mil/tadlp/delivery/alms.asp

52.222-50 Combating Trafficking in Persons MAR 2015

52.222-54 Employment Eligibility Verification OCT 2015

52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008

52.228-5 Insurance - Work On A Government Installation JAN 1997

52.232-18 Availability Of Funds APR 1984

52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-36 Payment by Third Party MAY 2014

52.232-37 Multiple Payment Arrangements MAY 1999

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-3 Protest After Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.242-13 Bankruptcy JUL 1995

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of

Terrorism

OCT 2015

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2016

252.225-7012 Preference For Certain Domestic Commodities DEC 2016

252.225-7021 Trade Agreements--Basic DEC 2016

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006

CLAUSES INCORPORATED BY FULL TEXT

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (NOV 2015)

(a) Definitions. As used in this clause--

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of

6 U.S.C. 395(c).

Subsidiary means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

(b) If the contractor reorganizes as an inverted domestic corporation or becomes a subsidiary of an inverted domestic corporation at any time during the period of performance of this contract, the Government may be prohibited from paying for Contractor activities performed after the date when it becomes an inverted domestic corporation or subsidiary. The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.

(c) Exceptions to this prohibition are located at 9.108-2.

(d) In the event the Contractor becomes either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation during contract performance, the Contractor shall give written notice to the Contracting

Officer within five business days from the date of the inversion event.

(End of clause)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013)

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts--

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The

Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the

Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in

SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code - assigned to contract number .

(Contractor to sign and date and insert authorized signer's name and title).

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DoD FAR Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT

(MAY 2016)

Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms, processes, flow charts, formulae, and related material that would enable the software to be reproduced, recreated, or recompiled. Computer software does not include computer data bases or computer software documentation.

Litigation support means administrative, technical, or professional services provided in support of the Government during or in anticipation of litigation.

Litigation support contractor means a contractor (including its experts, technical consultants, subcontractors, and suppliers) providing litigation support under a contract that contains the clause at 252.204-7014, Limitations on the

Use or Disclosure of Information by Litigation Support Contractors.

Sensitive information means controlled unclassified information of a commercial, financial, proprietary, or privileged nature. The term includes technical data and computer software, but does not include information that is lawfully, publicly available without restriction.

Technical data means recorded information, regardless of the form or method of the recording, of a scientific or technical nature (including computer software documentation). The term does not include computer software or data incidental to contract administration, such as financial and/or management information.

(b) Notice of authorized disclosures. Notwithstanding any other provision of this solicitation or contract, the

Government may disclose to a litigation support contractor, for the sole purpose of litigation support activities, any information, including sensitive information, received—

(1) Within or in connection with a quotation or offer; or

(2) In the performance of or in connection with a contract.

(c) Flowdown. Include the substance of this clause, including this paragraph (c), in all subcontracts, including subcontracts for commercial items.

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200

(ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical

Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

http://www.aimglobal.org/?Reg_Authority15459

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the

Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with

ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data

Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with

ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-

130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph

(g), in the applicable subcontract(s), including subcontracts for commercial items.

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

(a) The Contractor is not required to flow down the terms of any Defense Federal Acquisition Regulation

Supplement (DFARS) clause in subcontracts for commercial items at any tier under this contract, unless so specified in the particular clause.

(b) While not required, the Contractor may flow down to subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligation.

http://dodprocurementtoolbox.com/site/uidregistry/ http://dodprocurementtoolbox.com/site/uidregistry/

(c) The Contractor shall include the terms of this clause, including this paragraph (c), in subcontracts awarded under this contract, including subcontracts for the acquisition of commercial items.

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (APR 2014)

(a) Definitions. As used in this clause --

"Components" means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

"Department of Defense" (DoD) means the Army, Navy, Air Force, Marine Corps, and defense agencies.

"Foreign-flag vessel" means any vessel that is not a U.S.-flag vessel.

"Ocean transportation" means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.

"Subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.

"Supplies" means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the DoD at the time of transportation by sea.

(i) An item is clearly identifiable for eventual use by the DoD if, for example, the contract documentation contains a reference to a DoD contract number or a military destination.

(ii) "Supplies" includes (but is not limited to) public works; buildings and facilities; ships; floating equipment and vessels of every character, type, and description, with parts, subassemblies, accessories, and equipment; machine tools; material; equipment; stores of all kinds; end items; construction materials; and components of the foregoing.

"U.S.-flag vessel" means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.

(b)(1) The Contractor shall use U.S.-flag vessels when transporting any supplies by sea under this contract.

(2) A subcontractor transporting supplies by sea under this contract shall use U.S.-flag vessels if--

(i) This contract is a construction contract; or

(ii) The supplies being transported are--

(A) Noncommercial items; or

(B) Commercial items that--

(1) The Contractor is reselling or distributing to the Government without adding value (generally, the Contractor does not add value to items that it contracts for f.o.b. destination shipment);

(2) Are shipped in direct support of U.S. military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or

(3) Are commissary or exchange cargoes transported outside of the Defense Transportation System in accordance with 10 U.S.C. 2643.

(c) The Contractor and its subcontractors may request that the Contracting Officer authorize shipment in foreign-flag vessels, or designate available U.S.-flag vessels, if the Contractor or a subcontractor believes that --

(1) U.S.-flag vessels are not available for timely shipment;

(2) The freight charges are inordinately excessive or unreasonable; or

(3) Freight charges are higher than charges to private persons for transportation of like goods.

(d) The Contractor must submit any request for use of foreign-flag vessels in writing to the Contracting Officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The Contracting Officer will process requests submitted after such date(s) as expeditiously as possible, but the Contracting Officer's failure to grant approvals to meet the shipper's sailing date will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum --

(1) Type, weight, and cube of cargo;

(2) Required shipping date;

(3) Special handling and discharge requirements;

(4) Loading and discharge points;

(5) Name of shipper and consignee;

(6) Prime contract number; and

(7) A documented description of efforts made to secure U.S.-flag vessels, including points of contact (with names and telephone numbers) with at least two U.S.-flag carriers contacted. Copies of telephone notes, telegraphic and facsimile message or letters will be sufficient for this purpose.

(e) The Contractor shall, within 30 days after each shipment covered by this clause, provide the Contracting Officer and the Maritime Administration, Office of Cargo Preference, U.S. Department of Transportation, 400 Seventh

Street SW., Washington, DC 20590, one copy of the rated on board vessel operating carrier's ocean bill of lading, which shall contain the following information:

(1) Prime contract number;

(2) Name of vessel;

(3) Vessel flag of registry;

(4) Date of loading;

(5) Port of loading;

(6) Port of final discharge;

(7) Description of commodity;

(8) Gross weight in pounds and cubic feet if available;

(9) Total ocean freight in U.S. dollars; and

(10) Name of the steamship company.

(f) If this contract exceeds the simplified acquisition threshold, the Contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief--

(1) No ocean transportation was used in the performance of this contract;

(2) Ocean transportation was used and only U.S.-flag vessels were used for all ocean shipments under the contract;

(3) Ocean transportation was used, and the Contractor had the written consent of the Contracting Officer for all foreign-flag ocean transportation; or

(4) Ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of the Contracting Officer. The Contractor shall describe these shipments in the following format:

ITEM CONTRACT QUANTITY

DESCRIPTION LINE ITEMS

TOTAL_______________________________________________________________

(g) If this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the Government will reject and return it to the Contractor as an improper invoice for the purposes of the Prompt Payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the Contracting Officer is entitled to equitably adjust the contract, based on the unauthorized use.

(h) In the award of subcontracts for the types of supplies described in paragraph (b)(2) of this clause, including subcontracts for commercial items, the Contractor shall flow down the requirements of this clause as follows:

(1) The Contractor shall insert the substance of this clause, including this paragraph (h), in subcontracts that exceed the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

(2) The Contractor shall insert the substance of paragraphs (a) through (e) of this clause, and this paragraph (h), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation.

ADDITIONAL INFORMATION

Non-Defense Health Agency (Non-DHA) Health Insurance Portability and Accountability Act (HIPAA) Business Associate Agreement (BAA) (7 July 2014)

Introduction

In accordance with 45 CFR 164.502(e)(2) and 164.504(e) and paragraph C.3.4.1.3 of DoD 6025.18-R, “DoD Health

Information Privacy Regulation,” January 24, 2003, this document serves as a BAA between the signatory parties for purposes of the HIPAA and the “HITECH Act” amendments thereof, as implemented by the HIPAA Rules and

DoD HIPAA Issuances (both defined below). The parties are a DoD Military Health System (MHS) component, acting as a HIPAA covered entity, and a DoD contractor, acting as a HIPAA business associate. The HIPAA Rules require BAAs between covered entities and business associates. Implementing this BAA requirement, the applicable DoD HIPAA Issuance (DoD 6025.18-R, paragraph C3.4.1.3) provides that requirements applicable to business associates must be incorporated (or incorporated by reference) into the contract or agreement between the parties.

(a) Catchall Definition. Except as provided otherwise in this BAA, the following terms used in this BAA shall have the same meaning as those terms in the DoD HIPAA Rules: Data Aggregation, Designated Record Set, Disclosure, Health Care Operations, Individual, Minimum Necessary, Notice of Privacy Practices (NoPP), Protected Health

Information (PHI), Required By Law, Secretary, Security Incident, Subcontractor, Unsecured Protected Health

Information, and Use.

—Breach means actual or possible loss of control, unauthorized disclosure of or unauthorized access to PHI or other

PII (which may include, but is not limited to PHI), where persons other than authorized users gain access or potential access to such information for any purpose other than authorized purposes, where one or more individuals will be adversely affected. The foregoing definition is based on the definition of breach in DoD Privacy Act

Issuances as defined herein.

—Business Associate shall generally have the same meaning as the term “business associate” in the DoD HIPAA

Issuances, and in reference to this BAA, shall ***TO BE FILLED-IN UPON AWARD***.

—Agreement means this BAA together with the documents and/or other arrangements under which the Business

Associate signatory performs services involving access to PHI on behalf of the MHS component signatory to this

BAA.

—Covered Entity shall generally have the same meaning as the term “covered entity” in the DoD HIPAA Issuances, and in reference to this BAA, shall mean U.S. Army Medical Command.

—DHA Privacy Office means the DHA Privacy and Civil Liberties Office. The DHA Privacy Office Director is the

HIPAA Privacy and Security Officer for DHA, including the National Capital Region Medical Directorate

(NCRMD).

—DoD HIPAA Issuances means the DoD issuances implementing the HIPAA Rules in the DoD Military Health

System (MHS). These issuances are DoD 6025.18-R (2003), DoDI 6025.18 (2009), and DoD 8580.02-R (2007).

—DoD Privacy Act Issuances means the DoD issuances implementing the Privacy Act, which are DoDD 5400.11

(2007) and DoD 5400.11-R (2007).

—HHS Breach means a breach that satisfies the HIPAA Breach Rule definition of breach in 45 CFR 164.402.

—HIPAA Rules means, collectively, the HIPAA Privacy, Security, Breach and Enforcement Rules, issued by the

U.S. Department of Health and Human Services (HHS) and codified at 45 CFR Part 160 and Part 164, Subpart E

(Privacy), Subpart C (Security), Subpart D (Breach) and Part 160, Subparts C-D (Enforcement), as amended by the

2013 modifications to those Rules, implementing the “HITECH Act” provisions of Pub. L. 111-5. See 78 FR 5566-

5702 (Jan. 25, 2013) (with corrections at 78 FR 32464 (June 7, 2013)). Additional HIPAA rules regarding electronic transactions and code sets (45 CFR Part 162) are not addressed in this BAA and are not included in the term HIPAA Rules.

—Service-Level Privacy Office means one or more offices within the military services (Army, Navy, or Air Force) with oversight authority over Privacy Act and HIPAA privacy compliance.

I. Obligations and Activities of Business Associate

(a) The Business Associate shall not use or disclose PHI other than as permitted or required by the Agreement or as required by law.

(b) The Business Associate shall use appropriate safeguards, and comply with the DoD HIPAA Rules with respect to electronic PHI, to prevent use or disclosure of PHI other than as provided for by the Agreement.

(c) The Business Associate shall report to Covered Entity any Breach of which it becomes aware, and shall proceed with breach response steps as required by Part V of this BAA. With respect to electronic PHI, the Business

Associate shall also respond to any security incident of which it becomes aware in accordance with any Information

Assurance provisions of the Agreement. If at any point the Business Associate becomes aware that a security incident involves a Breach, the Business Associate shall immediately initiate breach response as required by part V of this BAA.

(d) In accordance with 45 CFR 164.502(e)(1)(ii)) and 164.308(b)(2), respectively), as applicable, the Business

Associate shall ensure that any subcontractors that create, receive, maintain, or transmit PHI on behalf of the

Business Associate agree to the same restrictions, conditions, and requirements that apply to the Business Associate with respect to such PHI.

(e) The Business Associate shall make available PHI in a Designated Record Set, to the Covered Entity or, as directed by the Covered Entity, to an Individual, as necessary to satisfy the Covered Entity obligations under 45

CFR 164.524.

(f) The Business Associate shall make any amendment(s) to PHI in a Designated Record Set as directed or agreed to by the Covered Entity pursuant to 45 CFR 164.526, or take other measures as necessary to satisfy Covered Entity’s obligations under 45 CFR 164.526.

(g) The Business Associate shall maintain and make available the information required to provide an accounting of disclosures to the Covered Entity or an individual as necessary to satisfy the Covered Entity’s obligations under 45

CFR 164.528.

(h) To the extent the Business Associate is to carry out one or more of Covered Entity's obligation(s) under the

HIPAA Privacy Rule, the Business Associate shall comply with the requirements of HIPAA Privacy Rule that apply to the Covered Entity in the performance of such obligation(s); and

(i) The Business Associate shall make its internal practices, books, and records available to the Secretary for purposes of determining compliance with the HIPAA Rules.

II. Permitted Uses and Disclosures by Business Associate

(a) The Business Associate may only use or disclose PHI as necessary to perform the services set forth in the

Agreement or as required by law. The Business Associate is not permitted to de-identify PHI under DoD HIPAA issuances or the corresponding 45 CFR 164.514(a)-(c), nor is it permitted to use or disclose de-identified PHI, except as provided by the Agreement or directed by the Covered Entity.

(b) The Business Associate agrees to use, disclose and request PHI only in accordance with the HIPAA Privacy Rule

“minimum necessary” standard and corresponding DHA policies and procedures as stated in the DoD HIPAA

Issuances.

(c) The Business Associate shall not use or disclose PHI in a manner that would violate the DoD HIPAA Issuances or HIPAA Privacy Rules if done by the Covered Entity, except uses and disclosures for the Business Associate’s own management and administration and legal responsibilities or for data aggregation services as set forth in the following three paragraphs.

(d) Except as otherwise limited in the Agreement, the Business Associate may use PHI for the proper management and administration of the Business Associate or to carry out the legal responsibilities of the Business Associate. The foregoing authority to use PHI does not apply to disclosure of PHI, which is covered in the next paragraph.

(e) Except as otherwise limited in the Agreement, the Business Associate may disclose PHI for the proper management and administration of the…