BAA FY27 topic areas _11-18-2026.pdf
PDF 241 KB Posted
- Solicitation number
- W5J9CQ27S0001
About this file
This is a Broad Agency Announcement (BAA) for research and development contracts issued by the Army Geospatial Center under solicitation number W5J9CQ27S0001. The BAA is open for 365 days from the posting date of December 1, 2026, with a closing date of November 30, 2027 at 4:00 PM Eastern Standard Time. The Army Geospatial Center is soliciting white papers and proposals for basic and applied research, advanced technology development, and advanced component development and prototypes in multiple geospatial research topic areas under FAR 35.102 and DFARS regulations. Multiple awards are anticipated, and all contracts will be FAR-based procurement contracts only; no grants, cooperative agreements, or other transactions are available. The Government reserves the right to select for award all, some, one, or none of the proposals received and may fund proposals in phases with options for continued work.
The BAA follows a two-step process requiring white paper submission first (not to exceed 5 pages including principal investigator CV) followed by invitation-only full proposal submission upon Government request. Research topic areas span three directorates: Enterprise Support Branch (10 topics including AGE operations, geospatial standards, microservices, data modeling, modeling and simulation, interoperability testbeds, tactical cloud computing, disconnected/intermittent/low-bandwidth operations, high-performance architecture, and big data content management); Imagery Systems Branch (3 topics covering space-ground intelligence integration, sensor-to-shooter automation, and space superiority); and Systems Applications and Integration Branch (4 topic areas addressing AI and machine learning, geopolitical intelligence, and contested logistics). Proposals must address the applicable research topic and demonstrate capability to perform; evaluation criteria include scientific and technical merit, mission contribution, offeror capability, key personnel qualifications, cost/price reasonableness, and past performance. The preferred contract type is firm-fixed-price, though cost-reimbursement or hybrid types may be negotiated. All submissions must be sent to AGCBAAProposals@usace.army.mil and must not contain classified information. The Government encourages submissions from small businesses, women-owned small businesses, disadvantaged businesses, HUBZone businesses, 8(a) participants, service-disabled veteran-owned businesses, and educational institutions, with no set-asides specified for this full and open competition BAA.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ARMY GEOSPATIAL CENTER
BROAD AGENCY ANNOUNCEMENT (BAA)
SOLICITATION NUMBER W5J9CQ27S0001
OVERVIEW INFORMATION
Federal Agency Name: Army Geospatial Center (AGC) Funding: Research, Development, Test, & Evaluation (RDT&E) Opportunity Title: AGC Broad Agency Announcement Announcement Type: Initial Announcement Dates:
Posting Date – 1 December 2026 Closing Date – 30 November 2027 by 4:00pm Eastern Standard Time
Description of Opportunity: AGC is soliciting white papers and proposals in accordance with Federal Acquisition Regulation RFO FAR 35.102, Department of Defense Federal Acquisition Regulation Supplement RFO DFARS 206.101-70(a), and RFO DFARS 235.102, which provides for competitive selection of basic and applied research, advanced technology development, and advanced component development and prototypes (hereinafter referred to as research). This announcement is general in nature and addresses multiple topic areas of research for the Systems and Acquisition Support Directorate. Submissions in response to this announcement shall be for areas relating to the advancement of a wide variety of geospatial topics, which are listed herein.
Accordingly, proposals selected for award are considered to be the result of full and open competition and fully compliant with Public Law 98-369, "The Competition in Contracting Act of 1984,” RFO DFARS 215.202-71(d)(1)(iv), and RFO DFARS 235.172.
This BAA is for procurement contracts (hereinafter referred to as contracts) only, and does not include grants, cooperative agreements, or other transactions.
Anticipated individual awards: Multiple awards are anticipated; AGC reserves the right to select for award all, some, one, or none of the proposals received in response to this announcement.
Submission Process: Two Step Process consisting of the following: Step 1- White Paper and Step 2 - Proposal (proposal submitted upon issuance of a formal Request for Proposal to Offeror).
Types of instruments that may be awarded: FAR based contracts only
Amendments: Amendments to this Broad Agency Announcement (BAA) will be issued through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, available at https://piee.eb.mil, and will be publicly posted to SAM.gov Contract Opportunities at https://sam.gov. Offerors are responsible for monitoring the BAA notice for amendments.
Questions, White paper, and proposal submission mailbox: AGCBAAProposals@usace.army.mil
SECTION I: FUNDING OPPORTUNITY DESCRIPTION
AGC is soliciting proposals in accordance with RFO FAR 35.102 relating to the advancement of the state-of-the-art and increasing knowledge or understanding in any of the geospatial research topic areas identified in this solicitation.
This announcement is open for 365 days from the original posting date. Any white papers or proposals received during that time shall only be considered for award of a contract, not for any other transaction, grant, or cooperative agreement.
AGC Background
AGC is a Major Subordinate Command (MSC) under the U.S. Army Corps of Engineers (USACE) located at the Humphreys Engineer Center in Alexandria, Virginia. AGC’s focus is on the Army’s Geospatial Enterprise (AGE) function from Policy to Warfighting; supporting the Army's Mission Command Systems by facilitating collection, management, exploitation; and dissemination of relevant geospatial information and products to every level across the operational environment.
AGC Mission
Coordinate, integrate and synchronize geospatial information requirements and standards across the Army; develop and field geospatial-enterprise enabled systems and capabilities to the Army and the Department of War (DOW); and provide direct geospatial support and products to Warfighters.
Roles and Responsibilities
1. Execute policy and implement standards; monitor emerging technologies; validate AGE technical solutions.
2. Conduct Research Development Test & Evaluation (RDTE) aimed at increasing the agility of Mission Command through characterization and application of Geospatial Data & Information (GI&S).
3. Provide technical, acquisition integration and logistical support to the Army acquisition community and transitional technical capabilities under rapid prototyping, build and maintain a Ground – Warfighter Geospatial Data Model that provides a framework for common geospatial concepts and semantics required to share data and support common geospatial application services across the Army, other services, DOW organizations, and Coalition partners.
4. Serve as the Army’s Geospatial Center of Excellence, providing direct support to Geospatial Engineers (Geospatial Planning Cell down to Brigade Combat Team), as well as all other operating and generating forces that consume or produce geospatial information and services
Research Topic Areas for AGC 2027 BAA:
A. Systems and Acquisition Support Directorate
A.1. Enterprise
Support Branch
Branch Overview:
The Enterprise Support Branch synchronizes AGC policies, priorities, programs, production requirements, strategies, and technologies across the Army Acquisition Community—specifically supporting Capability Program Executive (CPE) and Program Managers (PMs). The branch ensures the efficient integration of Geographic Information System (GIS) and Geospatial Intelligence (GEOINT) technologies into military systems in a manner consistent with Headquarters, Department of the Army (HQDA) approved policies and the Army Geospatial Enterprise (AGE) architecture.
Topic Areas:
Army Geospatial Enterprise (AGE) Operations (AGC-01).
Objective: Research technologies, open architectures, and orchestration processes to support enterprise-wide geospatial operations from the tactical edge (dismounted soldiers/individual platforms) up to the theater and national levels. This includes investigation into how weapon systems can dynamically consume and share geospatial data within contested and congested computing environments.
Next-Generation Geospatial Standards (AGC-02).
Objective: Investigate metadata and interoperability standards (such as Open Geospatial Consortium Application Programming Interface OGC API features, 3D Portrayal, and 3D Tiles) to support rapid geospatial collaboration, discovery, and visualization. Research must focus on the constraints of disconnected, intermittent, and low-bandwidth (DIL) tactical communications networks, and cross-domain data synchronization.
Geospatial Applications and Microservices (AGC-03).
Objective: Design and prototype lightweight, containerized geospatial applications and microservices optimized for Next Generation Command and Control (NGC2). Research should focus on reducing bandwidth requirements, automating map compilation, and enabling decentralized edge-based geospatial processing.
Advanced Geospatial Data Model Development (AGC-04).
Objective: Support the evolution of the Army-wide geospatial data model. Research should examine alignment with the National System for Geospatial-Intelligence (NSG) and Joint/Coalition standards, optimizing data schemas for rapid querying, semantic interoperability, and artificial intelligence (AI) readiness.
Geospatial Modeling & Simulation (M&S) (AGC-05).
Objective: Research processes for the automated generation, verification, and validation of high accuracy digital terrain databases for use in constructive, virtual, and live training simulations.
Automated Interoperability Testbeds & Experimentation (AGC-06)
Objective: Research automated testing, validation, and certification software frameworks to assess whether newly procured systems conform to AGE standards and geospatial interoperability profiles. Develop metrics, emulation environments, and instrumentation to measure the operational effects of geospatial data latency, accuracy, and synchronization on tactical networks.
Hybrid Tactical Cloud Computing for Geospatial Enterprises (AGC-07)
Objective: Explore hybrid and multi-cloud architectures that extend to tactical edge nodes. Research should address indexing, storage, and delivery of large geospatial datasets (raster, vector and 3D point clouds date) to disconnected, intermittent, or bandwidth constrained tactical users while maintaining strict Zero Trust security principles. Design next-generation architectures for geospatial "Big Data" repositories architectures that automate the delivery of authoritative data sources (ADS) from national hubs down to tactical units and handheld devices.
Disconnected, Intermittent, and Low-Bandwidth (DIL) Operations (AGC-08)
Objective: Develop algorithms, software synchronization protocols, and edge-hardware optimizations that enable mobile devices , including augmented reality headsets and Team Awareness Kit (TAK) enabled devices, to operate using high-fidelity local geospatial databases. Research should enable the synchronization of change-detection packages back to the cloud-based repositories when connectivity is restored.
High-Performance Geospatial Architecture (AGC-09)
Objective: Research and develop secure file-based and service-based exchange architectures across security enclaves (NIPR, SIPR, JWICS). Solutions should support cross-domain guard capabilities for the secure transfer of raster, vector, and elevation data.
Big Data Geospatial Content Management (AGC -10)
Objective: Investigate AI and automated workflows for quality assurance/quality control (QA/QC), validation, deduplication, and packaging of large, heterogeneous geospatial datasets.
A.2. Imagery Systems Branch (ISB)
Branch Overview:
The Imagery Systems Branch conducts advanced and engineering development in geospatial intelligence, with emphasis on the Tasking, Processing, Exploitation, and Dissemination (TPED) pipeline. ISB supports the fielding, operation, and modernization of space-related and ground-based tactical systems and serves as the primary technical interface to the Army Tactical Exploitation of National Capabilities (TENCAP) office.
Topic Areas:
Space-Ground Geospatial Intelligence Integration (AGC-11)
Objective: Research end-to-end architectures that accelerate integration of national, commercial, and theater-level sensor data (including radar, electro-optical, infrared, and hyperspectral data) into tactical ground stations and mobile decision-support tools.
Sensor-to-Shooter Automation & Edge Processing (AGC-12)
Objective: Develop lightweight, power-efficient hardware and software prototypes that execute machine learning and computer vision models on airborne, spaceborne, or edge-computing platforms. Research should address automated target recognition, rapid hazard detection, and low-latency dissemination in global positioning system (GPS)-denied or electronic-warfare environments.
Space Superiority and Tactical Intelligence Integration (AGC-13)
Objective: Conduct research, analysis, and prototyping of geospatial systems, mapping frameworks, and Space Domain Awareness (SDA) technologies. Develop resilient hardware and software architectures to process, decrypt, and exploit high-resolution National Technical Means (NTM) data at the tactical edge. Prototypes should support secure, low-latency, and resilient data flows in contested space domains, heavily jammed communication environments, and satellite-denied conditions.
A.3. Systems Applications and Integration Branch (SAIB)
Branch Overview:
The Systems Applications and Integration Branch conducts R&D in AI, machine learning (ML), natural language processing (NLP), big data analytics, human geography, and decision support systems (DSS). SAIB is focused on delivering innovative, data-driven capabilities that support Army decision making and operations.
Research Areas:
Artificial Intelligence & Machine Learning for Geospatial Systems (AGC-14)
Predictive AI for Operational Environments (AGC-14.1): Integrate AI models to analyze urban terrain, land dynamics, microclimates, and hydrology. Research should focus on predicting environmental impacts (including cross-country mobility, flooding, and soil trafficability) to support military maneuver, security cooperation, and disaster response.
AI-Ready Data Engineering (AGC-14.2): Develop automated techniques to preprocess, normalize, and transform legacy defense geospatial formats into standardized, AI-ready inputs.
Geospatial Intelligence and Information Advantage for Great Power Competition (GPC)
(AGC-15)
Objective: Research geospatial intelligence and open-source intelligence (OSINT) analytics to detect, map, and analyze "Gray Zone" activities and influence operations, establishing a decisive information advantage over near-peer adversaries in contested regional spheres.
OSINT-GEOINT Fusion & Civil Informatics (AGC-15.1): Develop methodologies to integrate publicly available social media information, commercial imagery, maritime and aviation transponder data, and civil-military informatics (PMESII-PT) factors. Research should support analysis of peer-competitor activities, partner nation capabilities, and operationally relevant local vulnerabilities in near-real-time.
Geopolitical & Economic Supply Chain Mapping (AGC-15.2): Leverage geospatial analytics and graph database modeling to map adversary investments in critical global infrastructure, deep-water ports, telecommunication links, and critical mineral supply chains.
Contested Logistics (AGC-16)
Objective: Investigate the impact of extreme environmental conditions and resource scarcity on contested military logistics and physical survivability.
Arctic Security Operations & High-Latitude Mobility (AGC-16.1): Research thermal modeling, ice-sheet and permafrost changes, and dynamic maritime routes to support tactical maneuvers and infrastructure design in extreme cold environments.
Resource Scarcity-Driven Migration & Conflict Analysis (AGC-16.2): Build predictive models to forecast regional instabilities from resource scarcity driven conflicts.
Resilient Military & Logistics Infrastructure (AGC-16.3): Develop geospatial models to evaluate the structural vulnerability of domestic and foreign military installations, supply hubs, and tactical bridges to extreme weather, storm surges, and changing terrain profiles under near-peer targeting constraints.
PART II: EVALUATION CRITERIA
This BAA is for contracts. Accordingly, the Government may award any appropriate contract type under the FAR. This BAA supersedes all previous editions and shall remain in effect until superseded.
Multiple awards are anticipated as a result of this BAA. The amount of resources made available under this BAA will depend on the quality of the submissions received and the availability of RDT&E funds. The Government reserves the right to:
1. Select for negotiation all, some, one, or none of the proposals received in response to this BAA.
2. Award contracts with or without discussions with Offerors.
3. Remove Offerors from award consideration should the parties fail to reach agreement on award terms, conditions and cost/price within a reasonable time or the Offeror fails to timely provide requested additional information.
4. Have sole discretion to negotiate all contract clauses with selectees.
5. Accept proposals in their entirety or to select only portions of proposals for award. In the event the Government desires to award only portions of a proposal, negotiations may be opened with the Offeror.
6. Fund proposals in phases with options for continued work at the end of one or more of the phases.
PART III: SUBMISSION INSTRUCTIONS
The Offeror must be considered responsible in accordance with RFO FAR 9.104. By submission of an offer or execution of a contract in response to this solicitation, the Offeror certifies they are not debarred, suspended, declared ineligible for award of public contracts, or proposed for debarment pursuant to RFO FAR 9.406-2. If the Offeror cannot certify, or if the status of the Offeror changes prior to award, the Offeror must provide detailed information as to its current status.
Proposals submitted under this BAA should identify any research expected to constitute fundamental, as defined in National Security Defense Directive (NSDD) 189.
Fundamental research means basic and applied research in science and engineering, the results of which ordinarily are published and shared broadly within the scientific community, as distinguished from proprietary research and from industrial development, design, production, and product utilization, the results of which ordinarily are restricted for proprietary or national security reasons.
The AGC highly encourages small business concerns, women owned small businesses, small disadvantaged business concerns, small businesses located in HUBZones, businesses participating in the Small Business Administration 8(a) program, service disabled veteran- owned small businesses, and veterans to submit research proposals for consideration. There will be no set-aside used for this BAA and all contracts awarded as a result of this BAA are considered full and open competition.
Awards of contracts to colleges and universities are permissible under this BAA, in accordance with 10 USC 2361, and are highly encouraged to submit proposals for consideration.
AGC encourages proposals from eligible institutions of higher education in support of the research areas identified in this BAA. Offerors shall address the applicable research topic and demonstrate their capability to perform the proposed effort. All proposals will be evaluated in accordance with the evaluation criteria stated in this BAA.
No funds appropriated to the Department of War may be provided to an institution of higher education that is subject to the prohibition at 10 U.S.C. § 983.
Department of Defense funds may NOT be provided to any institution of higher education that either has a policy of denying or that effectively prevents the Secretary of Defense from obtaining, for military recruiting purposes, entry to campuses or access to students on campuses or access to directory information pertaining to students.
White papers or proposals from United States Government agencies or Federally Funded Research and Development Centers (FFRDCs) will not be considered under this BAA.
Organizational Conflict of Interests All Offerors and proposed subcontractors must affirm whether they are providing scientific, engineering, and technical assistance (SETA) or similar support to any DoD Component through an active contract or subcontract. All affirmations must state the office(s) that the Offeror supports and identify the prime contract numbers. Affirmations shall be furnished at the time of proposal submission. All facts relevant to the existence or potential existence of organizational conflicts of interest must be disclosed. The disclosure shall include a description of the action the Offeror has taken or proposes to take to avoid, neutralize, or mitigate such conflict. Without prior approval, a contractor cannot simultaneously be a SETA and related research and development performer. Proposals that fail to fully disclose potential conflicts of interests or do not have acceptable plans to mitigate identified conflicts will be rejected without technical evaluation and withdrawn from further consideration for award.
Offerors should raise potential OCI concerns with the Contracting Officer as early as practicable. The Government will evaluate disclosed conflicts and proposed mitigation measures in accordance with applicable law and regulation. The Government may reject a proposal when an OCI cannot be avoided, neutralized, or mitigated to the Government’s satisfaction.
Foreign Participation
Foreign-owned offerors and offerors proposing foreign-national participation are advised that participation may be subject to foreign disclosure review procedures, export-control, security, and other Government review requirements. Offerors shall identify proposed foreign national participation in their full proposal, including the individual’s role, nationality, and extent of involvement, as required by the solicitation or requested by the Government. Any contractor personnel requiring access to Government systems, facilities, information, or controlled technologies must obtain required approvals before receiving that access.
PART IV: WHITE PAPER AND PROPOSAL SUBMISSION INFORMATION
Introduction:
White papers and proposals under this BAA shall describe scientific study and experimentation intended to advance the state of the art or increase knowledge and understanding in the applicable research area. The Government anticipates responding to white papers within 75 working days after receipt, eitherby issuing a formal Request for Proposal (RFP) or notifying the offeror that the white paper will not be pursued. All white papers and proposals shall be submitted to the AGC BAA Proposals Mailbox at AGCBAAProposals@usace.army.mil. Offerors shall follow to the following instructions pertaining to the type of document they are submitting:
A. White Paper Submission Instructions
**Do not submit White Papers directly to technical personnel** White papers shall be submitted only to AGC BAA proposals mailbox identified below.
White papers shall not contain classified data. Offerors shall mark each page containing proprietary information accordingly. Do not submit documents marked “classified,” “confidential,” “secret,” or with similar classified markings.
1. Submission Method: Submit white papers by email to
AGCBAAProposals@usace.army.mil.
2. Required Information: Include the following information in the email body:
a. Topic Name and Topic Number (Do not use any acronyms for topic name.)
b. Offeror name and address
c. White paper Title
d. Total estimated dollar amount
3. Format and Content: The white paper, including any cover sheet and the required curriculum vitae (CV) of the principal investigator, shall not exceed 5 (five) pages total. All pages shall be numbered consecutively.
White pages shall be formatted for printing on 8-1/2- by 11-inch paper, use a font size of no less than 12 point, and have margins of at least one-inch on all sides.
Smaller, legible font sizes may be used for figures, tables, and charts.
Submissions shall be in English and submitted in PDF or DOCX format.
The white paper shall include:
a. A title describing the proposed research;
b. The applicable topic area and topic number;
c. The name and telephone number of the principal investigator or senior researcher proposed to supervise the effort;
d. The estimated period of performance and a cost/price rough order of magnitude
(ROM);
e. A description of the proposed research objectives or goals, including the working hypothesis to tested, if appropriate;
f. A description of the proposed technical approach. Experimental efforts should describe the proposed testing scope. Analytical efforts should identify key assumptions, scientific basis, and proposed analytical or numerical methods;
g. A description of the potential military and/or civil benefits of the proposed research to the U.S. Army Corps of Engineers; and
h. A one-page CV of the principal investigator.
B. Proposal Submission Instructions
**DO NOT submit Proposals to technical personnel** Proposals shall be submitted only to the AGC BAA Proposal Mailbox
Proposals shall not contain classified information. Offerors shall mark each page containing proprietary or restricted information in accordance with the instructions below. Do not submit documents marked “classified,” “confidential,” “secret,” or with similar classified markings.
1. Invitation Requirement. Only offerors invited by the Contracting Officer may submit a full proposal. The Government will issue a formal Request for Proposal (RFP) to invited offerors that identifies the submission due date and any additional proposal instructions.
The proposal shall be complete and shall stand on its own merit. Only information included in the proposal may be considered during evaluation.
Proposals should be clear, concise, and address the offeror’s capability to perform the proposed work. The technical proposal shall include a fully supported cost/price proposal.
2. Submission method. Submit proposal by email to
AGCBAAProposals@usace.army.mil.
3. Required Email Information. Include the following information in the email body:
a. Topic Name and Topic Number. Do not use acronyms in the topic name.
b. Offeror Name and Address
c. Proposal Title
d. Total proposed dollar amount
4. Additional Information. Offerors should include the name, address, telephone number and email address of their cognizant Defense Contract Audit Agency (DCAA) office, if applicable.
5. Contractor Manpower Reporting. If applicable to the resulting award, contractor and subcontractor manpower reporting requirements will be identified in the solicitation or resulting contract.
6. System for Award Management. Offerors shall be registered in the System for Award Management (SAM) at https://www.sam.gov, as required by applicable regulation. Offerors shall include their Unique Entity Identifier (UEI) in the proposal. [Include CAGE code only if required for the contemplated award.]
7. Restricted Data. An offeror submitting proprietary or restricted data shall identify the restricted data and apply the restrictive legend required by the applicable solicitation provision. The offeror shall place the approved restrictive-data notice on the proposal cover page and mark each page containing restricted data.
8. Proposal Format. Proposals shall include, at a minimum, a cover page, table of contents, list of illustrations/tables, and executive summary. All pages shall be formatted for printing on 8-1/2- by 11-inch paper, use a font size not smaller than 12 point, and have margins of at least one- inch on all sides. Smaller, legible font sizes may be used for figures, tables and charts.
Pages shall be numbered consecutively. Proposals shall be in English and submitted in PDF or DOCX format.
9. Proposal Volumes and Contents.
The proposal shall identify the applicable topic name and topic number and include the following volumes:
Volume I — Technical Proposal (not to exceed 30 pages) Volume II — Quality Control Plan Volume III — Cost/Price Proposal Volume IV — Additional Representations and Certifications Volume V — Subcontracting Plan, if applicable
Unless otherwise stated in the individual RFP, the 30-page limit for Volume I includes the cover page, table of contents, list of illustrations/tables, executive summary, resumes, references, and appendices. Offerors shall use the following outline.
Proposal Contents/Checklist:
1. Cover Page
2. Table of Contents
3. List of Illustrations/Tables
4. Executive Summary
VOLUME I - Technical Proposal
1.1 Main Technical Idea
1.1.1 Technical Approach
1.1.2 Technical Discussion
1.1.3 Technical Program Summary
1.1.4 Risk Analysis and Alternatives
1.1.5 References
1.2 Support Features
1.2.1 Special Technical Factors
1.2.2 Capabilities and Relevant Experience
1.2.3 Previous or Current Relevant Independent Research and Development Work
1.2.4 Related Government Contracts
1.2.5 Facilities/Resources
1.3 Resources
1.3.1 Schedule
1.3.2 Timeline Chart by Task
1.3.3 Program Organization
1.3.3.1 Organization Chart(s) with Key Personnel
1.3.3.2 Management Team and Technical Team
1.3.4 Prime Contractor Responsibilities
1.3.5 Subcontractor(s) Responsibilities
1.3.6 Consultant(s) Responsibilities
1.3.7 Resumes of Key Personnel
1.4 Appendix (ces)
VOLUME II – Quality Control Plan (QCP)
VOLUME III – Cost/Price Proposal
3.1 Proposal Cover Sheet
3.2 Summary by Cost Element and Profit or Fee
3.3 Cost Summary Breakout and Supporting Detail
VOLUME IV – Additional Representations and Certifications
VOLUME V – Subcontracting Plan (if applicable)
10. SF-33. If required by the individual RFO, the offeror shall complete and submit Standard Form 33, Solicitation, Offer and Award, with each full proposal.
11. Proposal Completeness. Offerors shall include all information required by this BAA and the individual RFP to support timely evaluation.
Contents of Proposals:
1. Cover Page: The cover page shall identify the BAA number, applicable research and development topic and reference number, proposal title, and technical and contractual points of contact, including names, telephone numbers, and email address. Include the applicable proprietary data notice, if any.
2. Table of Contents: The table of contents shall identify each proposal section and its page number and may be used as a final quality-control checklist.
3. List of Illustrations/Tables: Provide a list of figures, charts, graphs, and tables, as applicable.
4. Executive Summary: Provide a concise summary of the proposed effort, including objective, technical approach, expected outcomes, and principal benefits to AGC. The executive summary should not exceed two pages.
VOLUME I: Technical Proposal
The technical portion of the proposal shall address the evaluation criteria in Part V, Administrative Information, and include sufficient detail to demonstrate the offeror’s understanding of the research objective, technical approach, capability, resources, and ability to perform the proposed effort.
1.1 Main Technical Idea
1.1.1 Technical Approach: Describe the proposed technical approach in sufficient detail to demonstrate its feasibility and merit. Clearly identify the principal technical concept and methods proposed to achieve the research objective.
Offerors should present a focused approach rather than multiple alternatives without identifying a preferred approach.
1.1.2 Technical Discussion: Describe the background, objectives, scope, proposed level of effort, technical methods, anticipated results, and proposed products or deliverables. Identify technical limitations, assumptions, dependencies, and challenges. Where applicable, describe tradeoffs among alternatives and support the preferred approach through theory, modeling, simulation, experimental data, prior results, or other sound scientific and engineering practices.
1.1.3 Technical Program Summary: Summarize the proposed effort in a logical sequence, identifying major tasks, key decision points, expected outcomes, and the principal strengths of the proposed approach.
1.1.4 Risk Analysis and Alternatives: Identify significant technical, schedule, cost, integration, and other program risks. Describe the potential effect of each risk on the proposed effort and the planned mitigation approach, including feasible alternatives or fallback approaches.
1.1.5 References: Provide citations for technical literature, data, analyses, and other materials relied upon in the proposal.
1.2 Support Features
1.2.0 Special Technical Factors: Describe any unique capabilities, methods, intellectual property, tools, data, facilities, or other technical factors that support successful performance of the proposed effort.
1.2.1 Capabilities and Relevant Experience. Describe the offeror’s relevant technical capabilities and experience, including prior work that demonstrates the ability to perform the proposed research.
1.2.2 Relevant Independent Research and Development (IR&D) Work. Describe any previous or ongoing independent research and development work relevant to the proposed effort. Identify related work submitted to or funded by another Government agency only when necessary to disclose overlap, duplication, potential conflict, or another material relationship to the proposed effort.
1.2.3 Related Government Contracts and Past Performance. Identify recent or current Government contracts relevant to the proposed effort. For each reference, provide the customer organization, contract number, period of performance, contract value, brief description of relevant work, and a point of contact with current contact information. Provide up to three relevant references performed within the past three years.
1.2.4 Facilities and Resources. Describe the facilities, equipment, software, data, laboratory resources, security infrastructure, and other resources available to support performance of the proposed effort. Identify any resources not currently available and explain how and when they will be obtained.
1.3 Resources
1.3.1 Schedule: Provide a schedule that demonstrates the offeror’s plan to perform the proposed effort in an orderly and timely manner.
1.3.2 Task-Based Timeline: Provide a timeline depicting each major task, key milestones, technical interchange meetings, reviews, demonstrations, deliverables, and final presentation, as applicable. Identify the anticipated location for in-person events, if known.
1.3.3 Program Organization: Describe the offeror’s organizational structure and ability to manage and perform the proposed effort. Identify the offeror’s name, address, primary technical point of contact, and primary contractual point of contact.
1.3.3.1 Organizational Chart(s) with Key Personnel: Provide organization charts identifying the prime contractor, subcontractors, consultants, key personnel, and reporting relationships.
1.3.3.2 Management and Technical Team: Identify the responsibilities of the management and technical team. For subcontractors and consultants, identify the work to be performed and the basis for their selection.
1.3.4 Prime Contractor Responsibilities: Describe the prime contractor’s roles, responsibilities, and management approach.
1.3.5 Subcontractor Responsibilities: Describe the roles and responsibilities of each proposed subcontractor.
1.3.6 Consultant Responsibilities: Description the roles and responsibilities of proposed consultants.
1.3.7 Resumes of Key Personnel: Provide resumes for key personnel proposed by the prime contractor, subcontractor, and consultants. Resumes should identify relevant education, experience, technical qualifications, prior work and recent publications, as applicable.
1.4 Appendix(ces)
Appendices may include relevant technical reports, published papers, or other referenced material. A citation or brief description is generally sufficient. Do not include commercial marketing or advertising materials.
All Volume I content—including the cover page, table of contents, list of illustrations/tables, executive summary, resumes, references, and appendices— counts toward the 30-page limit.
VOLUME II: Quality Control Plan (QCP)
The offeror shall submit a documented Quality Control Plan (QCP) describing the process it will use to ensure that all services and deliverables satisfy the requirements of the resulting contract. The QCP shall identify methods for preventing, detecting, documenting, correcting and tracking deficiencies throughout contract performance.
The QCP shall include, at a minimum:
a. Government Communications. Procedures for written and verbal communication with the Government regarding performance, deliverables issues, and corrective actions.
b. Corrective Action Procedures. Procedures for identifying, documentation, analyzing, correcting, and preventing deficiencies without reliance on Government intervention.
c. Surveillance Procedures. Specific quality-control procedures for each proposed deliverable or service. For each procedure, identify:
1. The deliverable or service subject to quality control;
2. The quality standard or acceptance criterion;
3. The individual or organization responsible for conducting the quality-control activity;
4. The frequency and timing of the activity;
5. The inspection, review, test, or other method to be used;
6. The records that will be maintained; and
7. The corrective action to be taken when a deficiency is identified.
Quality-control activities may include, as appropriate:
1. Quality control checklists;
2. Peer or management reviews of deliverables;
3. Structured technical walkthroughs;
4. Statistical sampling;
5. Verification and validation activities;
6. Software, system, or performance testing; and
7. Corrective-action tracking and closure.
VOLUME III: Cost Proposal
Contract Type. The preferred contract type is firm-fixed-priced. If a fixed-priced contract type is not reasonable or feasible, the offeror shall submit a written justification with its full proposal explaining why a fixed-priced contract type is not reasonable or feasible. Upon acceptance of the justifications, cost-reimbursement contract type or hybrid contract type may be negotiated. Funding arrangements are at the discretion of the Government.
Content of Cost Proposal. The cost proposal shall include the proposed price, detailed cost elements, and proposed profit or fee for the proposed effort. The estimate shall be detailed by task and shall provide a clear breakout of proposed expenditures and the basis for proposed prices and rates.
Direct and indirect rates shall be supported by historical commercial or Government rates, or by comparable rates for personnel with equivalent qualifications and experience. If proposed rates are based on DCMA or DCAA negotiated rates, the applicable rate agreements shall be provided. Offerors shall furnish the name and telephone number of their cognizant audit agency.
For proposal-pricing purposes, the Offeror should assume a contract start date of 90 days after proposal submission.
The cost proposal should be limited to the minimum number of pages necessary to satisfy the requirements stated herein. Extensive computer-generated supporting data is not necessary or desired unless essential to support the cost proposal. Any supporting addendum shall be clearly cross-referenced to the applicable material in the cost proposal.
Cost proposals shall represent the Offeror’s best response to the solicitation. Any material inconsistency, whether actual or apparent, between proposed performance and cost or pricing data shall be fully explained. Failure to explain significant inconsistencies may demonstrate a lack of understanding of the nature and scope of the proposed work.
In accordance with RFO FAR 35.102(f), cost proposals shall contain sufficient information to establish the reasonableness, realism, and completeness of the proposed cost or price. Any modification to the initial proposal, whether made during negotiations or as part of a proposal revision, shall be fully supported in writing.
At a minimum, Cost Proposals shall include the following:
a) Proposal Cover Sheet. A cover sheet for the total proposed effort.
b) Cost/Price Summary. A summary of proposed cost elements and proposed profit or fee, as applicable, for the total proposed effort.
c) Labor Summary. A labor summary by labor category, labor rate, and labor hours. Describe each labor category by relevant training, education, experience, and professional certifications. For firm-fixed-price proposals, provide fully burdened labor rates.
d) Labor-Rate Development. An explanation of how labor rates were developed, including base rates, escalation, and the basis of estimate.
e) Interdivisional Transfers. A detailed breakout of costs for proposed interdivisional transfers, if applicable.
f) Indirect Rates. Identification of indirect rates by fiscal year, including the basis for each rate and the allocation base to which each rate applies.
g) Bill of Materials. A bill of materials identifying items by type, quantity, unit price, total amount, and basis of estimate. Provide written vendor quotations when available and relied upon.
h) Travel. A summary of proposed travel by destination, purpose, number of travelers, number of days, airfare, lodging, per diem, rental vehicle, and other associated costs.
i) Consultants. Identify proposed consultants by name, labor rate, and proposed hours or days. Provide the basis for the proposed rate and a copy of the consulting agreement, if applicable.
j) Computer Use. Identify proposed computer, cloud, software, or information-technology use by type, rate, quantity, and basis of estimate.
k) Other Direct Costs. Identify other direct costs by type, quantity, unit cost, total amount, purpose, and basis of estimate. Specifically identify any printing or publication costs.
l) Facilities Capital Cost of Money. Provide DD Form 1861, Contract Facilities Capital Cost of Money, if facilities capital cost of money is proposed.
m) Subcontractor Proposals. Provide proposed subcontractor cost/price information and the Offeror’s cost or price analysis. If subcontract competition was not conducted, provide a sole-source justification.
n) Funding Forecast. Provide a forecast of monthly and cumulative dollar commitments for the proposed period of performance.
o) Proposed Fee. Identify the proposed fee, if applicable.
Subcontractors' proposals shall be structured consistent with the requirements of this BAA. All subcontracted work shall be clearly identified in the Offeror’s proposal. If a subcontractor submits an abbreviated proposal to the Offeror, the Offeror shall ensure that the subcontractor simultaneously submits a complete and detailed cost/price proposal directly to the Contracting Officer. The subcontractor’s submission shall clearly identify the prime Offeror and the applicable proposal. The Offeror is responsible for ensuring that its subcontractors comply with the requirements of this BAA. In accordance with RFO FAR 15.404-8, the Offeror shall provide an analysis of each proposed subcontractors' cost/price proposals. The Offeror's proposal shall:
a. Identify the principal items or services to be subcontracted.
b. Identify proposed subcontractors and the basis for their selection. If subcontract competition was not conducted, provide a sole source justification.
c. Identify the contemplated subcontract type and provide the rationale for its selection.
d. Identify the basis for the proposed subcontract costs included in the Offeror's proposal, such as a firm quotation, historical pricing, market research, or engineering estimate.
e. Identify any cost or pricing data, or information other than cost or pricing data submitted by the subcontractor.
f. Provide a price analysis of the proposed subcontract in accordance with RFO FAR 15.404-1. The analysis shall address the reasonableness and completeness of the proposed subcontract cost or price. When the analysis relies on prior prices, identify the basis on which the prior prices were determined to be reasonable.
g. When price analysis is insufficient or when required by regulation, provide a cost analysis in accordance with RFO FAR 15.404-8(a). The cost analysis shall address, at a minimum, materials, labor, travel, other direct costs, and proposed profit or fee.
Cost Element Summary Format. Cost elements that do not apply to the proposed effort may be omitted. Offerors shall not combine cost elements in a manner that prevents meaningful evaluation. Offerors may add cost elements unique to their pricing structure and may rearrange cost elements as necessary, provided that each proposed cost element is separately identified and adequately supported.
Certified cost or pricing data is required for proposals valued at or above $10 million, in accordance with RFO FAR 15.403-3, RFO DFARS 215.403-3, and RFO FAR 15.406- 2.
For proposals below the applicable threshold, the Government reserves the right to request data other than certified cost or pricing data as necessary to determine a fair and reasonable price.
VOLUME IV: Additional Representations and Certifications Signed and dated Standard Form 33 and Additional Representations and Certifications.
VOLUME V: Subcontracting Plan
a. Other than small business concerns shall submit a Small Business Subcontracting Plan that complies with RFO 52.219-9, Small Business Subcontracting Plan, and DFARS Class Deviation 2026-O0037, Evaluating small business subcontracting plans. The Small Business Subcontracting Plan shall contain elements required by RFO 52.219-9(d)(1) through (15).
b. Subcontracting Plans will be reviewed for adequacy to ensure that all required information, goals, and assurances are included in accordance with RFO52.219- 9(d)(1) through (15). If other than small business concerns fail to submit and negotiate a Subcontracting Plan acceptable to the Contracting Officer within the time prescribed by the Contracting Officer, the small business concern will be ineligible for award.
a. Subcontracting Plans will be determined acceptable or unacceptable using the criteria established in RFO FAR 19.206-3, RFO DFARS 219.206-3, and AFARS
5119.206. Subcontracting goals shall be established on an individual contract basis and should be realistic, challenging and attainable. To the maximum practicable extent, proposed goals should maximize small business participation in subcontracting including Small Business, Small Disadvantage Business (SDB), Woman-Owned Small Business (WOSB), Service-Disabled Veteran- Owned Small Business (SDVOSB), Veteran- Owned Small Business (VOSB), and Historically Underutilized Business Zone (HUBZone) Small Business.
b. Proposed subcontracting goals shall support efficient contract performance and shall not result in increased costs to the Government or an undue administrative burden on the prime contractor.
***NOTE: Small business concerns are exempt from this requirement to submit a Subcontracting Plan. This BAA is for procurement contracts only.***
Standard Form 33: Offerors shall submit a completed and signed SF 33 with the full proposal. The form is available through the General Services Administration forms library.
PART V: ADMINISTRATIVE INFORMATION
Evaluation Criteria
1. Proposals submitted in response to this BAA will be evaluated using the following criteria:
a. Scientific and Technical Merit. The overall scientific and/or technical merit of the proposal, including the extent to which the proposed effort meets RFO FAR requirements for scientific study and experimentation directed toward advancing the state-of-the-art or increasing knowledge or understanding, rather than developing a specific system or hardware solution.
b. Mission Contribution. The potential contribution of the proposed effort to the U.S.
Army Geospatial Center mission and research and development program.
c. Offeror Capability. The Offeror's capabilities, relevant experience, facilities, techniques, or unique combination of these factors necessary to achieving the proposal objectives.
d. Key Personnel. The qualifications, capabilities and experience of the proposed principal investigator, team leader, and other key personnel critical to achieving the proposed objectives.
e. Cost/Price. The reasonableness and realism of proposed costs, fees, and prices, as applicable.
f. Past Performance. The Offeror's record of past performance.
2. Upon receipt of a proposal, proposals will undergo an initial review of scientific merit, potential contribution to the Army mission, and anticipated availability of funds.
Proposals that do not demonstrate sufficient scientific merit or relevance to Army needs, or for which funds are not expected to be available, may be declined without further evaluation.
3. AGC will treat all proposals as privileged information before award and will disclose proposal contents only as necessary for evaluation and in accordance with applicable law and regulation. Proposals not declined during the initial review may undergo peer review by qualified Government evaluators. Offerors shall identify and appropriately mark proprietary or restricted information in accordance with the proposal submission instructions.
4. Each proposal will be evaluated based on the merit and relevance of the specific R&D effort proposed in relation to the overall AGC research and development program, rather than against other proposals in the same general research area.
Type of Contract
The Government may award firm-fixed-price, fixed-price level-of-effort, cost-plus-fixed-fee, cost-reimbursement, or hybrid contracts, as appropriate. The preferred contract type is firm-fixed-price.
If a firm-fixed-price contract is not reasonable or feasible for the proposed effort, the Offeror shall submit a written justification with its full proposal. The Government may negotiate a cost-reimbursement or hybrid contract type when appropriate based on the nature of the research and the results of negotiations. Funding arrangements are at the discretion of the Government.
Selection of the contract type will be based on factors described in RFO FAR Part 16, including the nature of the research, the extent to which costs and performance requirements can be defined, the Offeror’s experience maintaining cost records, and the ability to identify, allocate, and support proposed costs.
Any contract awarded under this BAA will incorporate applicable and current RFO FAR and RFO DFARS provisions and clauses. Resulting contracts may include special provisions addressing patent rights, rights in technical data and computer software, reporting requirements, equal employment opportunity, and other requirements applicable to the award.
The Government will award contracts only to Offerors determined responsible in accordance with RFO FAR Part 9.1.
PART VI: OTHER
Awards
The Government may award a contract without discussions when the Offeror submits all required information and the proposal is determined to be acceptable. Offerors are responsible for reviewing and complying with all BAA and proposal requirements.
Resulting awards may be issued on Standard Form 33, Standard Form 26, DD Form 1155, or another appropriate award document. Awards will include applicable contract clauses and will be prepared in accordance with the Uniform Contract Format, as appropriate.
Contract awards will be made electronically.
Contract clauses that are self-deleting or otherwise determined inapplicable will not require a contract modification for removal. Commencement of performance after receipt of an award signed by the Contracting Officer constitutes the Contractor’s acceptance of the award terms and conditions.
Report Requirements
The resulting contract will identify the required reports and deliverables. Reports shall be prepared and submitted in accordance with the applicable Contract Data Requirements List and DD Form 1423.
This notice constitutes a Broad Agency Announcement under RFO FAR 35.102. This BAA uses a two-step process. Offerors may submit white papers in accordance with the instructions in this BAA.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .