W58RGZ26B0004-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2026JUL06

W58RGZ

ARMY CONTRACTING COMMAND-REDSTONE

REDSTONE ARSENAL AL 35898-5280

JASON L. HOWELL

EMAIL: JASON.L.HOWELL4.CIV@ARMY.MIL

W58RGZ-26-B-0004

2026MAY04

X

X 2026JUL21 06:00pm

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 2

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: JASON L. HOWELL

Buyer Office Symbol/Telephone Number: CCAM-AVA-B/(520)674-8706

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

A-1. The purpose of Amendment 0002 to solicitation W58RGZ-26-B-0004 is to answer questions from industry.

A-2. Is the Government going to provide bushing drawings for contractors to manufacture their own bushings or will these have to be procured? These will have to be procured. Local manufacturing could be approved via a FCDD-AMR-AM FORM 1379 provided industry demonstrates the capability to meet all requirements. Manufactured bushings must comply with bushing specifications, tech data, and DMWR requirements.

A-3. Is contractor manufacturing the data plates as part of the overhaul or are we able to procure them? Data plates may be procured.

Local manufacturing may be authorized under FCDD-AMR-AM FORM 1379, provided the manufacturing source demonstrates the capability to meet all marking and material requirements in accordance with the applicable specifications and DMWR.

A-4. Who will support the contractor if we have technical issues outside the DMWR for engineering support or detailed drawing requests for paint schemes, plating schemes, outside the DMWR guidance? The Systems Readiness Directorate is the technical point of contact.

These questions will be submitted via a FCDD-AMR-AM FORM 1379 to the contracting officer who will input them into the PAID database.

Then the questions will be assigned to an engineer.

A-5. Is the resin coating IAW MIL-PRF-3043 required to be stripped at every overhaul? No, the baked resin coating is not required to be stripped at every overhaul. Per WP 0010 [In-Process Inspection], it should only be stripped and reapplied if it is worn, lost, or exhibits poor adhesion.

A-6. Is cadmium allowed to be substituted as a coating instead of Ion Vapor Deposited (IVD) Aluminum? Per the DMWR, IVD is allowed to be substituted for Cadmium coated parts. Is it possible to substitute IVD for Cadmium? Per the DMWR, substituting IVD Aluminum in place of Cadmium is permitted, but the reverse is considered a deviation and therefore must be evaluated on a case-by-case basis for specific components. To request an evaluation for a specific part, submit a FCDD-AMR-AM FORM 1379 for technical disposition.

A-7. Is chemical stripping the only allowed method for stripping paint and other coatings or can we use the dry blasting method of plastic media? Dry blasting with plastic media is not an authorized method for stripping any coating under the DMWR. Aluminum Ion Vapor

(IVD) Coating may be stripped via Glass Media Blast. Otherwise, all other coatings must be chemically stripped.

A-8. Are contractors stripping all coatings (minus anodizing and chrome/HVOF) for overhaul? All coatings, excluding anodizing, get stripped during the overhaul process. For added clarification and in contrast to the question statement, Chrome and HVOF coatings are stripped as required during damage repair for specific components.

A-10. What is the "general DMWR" or standard practice manual number if something falls out of guidance within DMWR 1-1620-247? Overhaul should follow the procedures outlined in the DMWR. The Contractor shall submit a FCDD-AMR-AM FORM 1379 form for deviation or exception requests.

A-11. For the replacement cost of the parts of scrap are we including these parts in the bid for the firm fixed price or repair/overhaul only? If the UNSERV asset is determined to be Scrap, then 99% of the time that UNSERV asset is disposed of locally at the vendor's facility.

A-12. The due date for proposal submission is changed from 14 July to 21 July 2026.

A-13. All other terms and conditions remain the same.

*** END OF NARRATIVE A0003 ***

2 2

W58RGZ-26-B-0004

SECTION A