W58RGZ_23-B-0031_15_MAY_2023.pdf

SOLICITATION, OFFER AND AWARD 1. This Contract Is A Rated Order Under

DPAS (15 CFR 700)

Rating Page of Pages

2. Contract Number 3. Solicitation Number 4. Type of Solicitation 5. Date Issued 6. Requisition/Purchase Number Sealed Bid (IFB)

Negotiated (RFP)

7. Issued By Code 8. Address Offer To (If Other Than Item 7)

NOTE: In sealed bid solicitations ‘offer’ and ‘offeror’ mean ‘bid’ and ‘bidder’.

SOLICITATION

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in item 8, or if handcarried, in the depository located in until (hour) local time (Date).

Caution - Late Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. For Information A. Name B. Telephone (No Collect Calls) C. E-mail Address

Call: Area Code Number Ext.

11. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses

B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attach.

C Description/Specs./Work Statement J List of Attachments D Packaging and Marking Part IV - Representations And Instructions E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors H Special Contract Requirements M Evaluation Factors for Award

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within _____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. Discount For Prompt Payment 10 Calendar Days (%) 20 Calendar Days (%) 30 Calendar Days (%) Calendar Days (%) (See Section I, Clause No. 52.232-8)

14. Acknowledgment of Amendments (The offeror acknowledges Amendment No. Date Amendment No. Date receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

15A. Name and Code Facility 16. Name and Title of Person Authorized to Sign Offer Address of (Type or Print) Offeror

15B. Telephone Number 15C. Check if Remittance Address is 17. Signature 18. Offer Date Area Code Number Ext. Different From Above – Enter such

Address In Schedule

AWARD (To be completed by Government)

19. Accepted As To Items Numbered 20. Amount 21. Accounting And Appropriation

22. Authority For Using Other Than Full And Open Competition: 23. Submit Invoices To Address Shown In Item

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

24. Administered By (If other than Item 7) Code 25. Payment Will Be Made By Code

26. Name of Contracting Officer (Type or Print) 27. United States Of America 28. Award Date

(Signature of Contracting Officer)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 33 (Rev. 9-97) Previous edition is unusable Prescribed By GSA-FAR (48 CFR) 53.214(c)

W58RGZ-23-B-0031 X

1 signed

DOA1

SEE SCHEDULE

W58RGZ

ARMY CONTRACTING COMMAND-REDSTONE

REDSTONE ARSENAL AL 35898-5280

ERICA BURNETTE

(256)955-0134

CCAM-AL-B

ERICA.N.BURNETTE.CIV@ARMY.MIL

1 72

X 1

X 5 X 17

X 20 X 24

X 30

X 33

X 35

X 56

X 57

X 69

X 72

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: ERICA BURNETTE

Buyer Office Symbol/Telephone Number: CCAM-AL-B/(256)955-0134

Type of Contract 1: Firm Fixed Price

Kind of Contract: Maintenance Contracts

*** End of Narrative A0000 ***

W58RGZ-23-B-0031_________________

A-1. This is a full and open competition. The applicable North American Industry Classification Systems (NAICS) code is 336413 and the size standard is 1,250 employees. Only bidders with NAICS code 336413 registered in Sam.gov are eligible to submit a bid. If a bidder who does not have NAICS code 336413 submits a bid, the quote will be deemed non-responsive and the bid will not be considered for award.

In addition, the awardee of the resultant contract must be registered with NAICS code 336413 at the time of award.

A-2. This will be a 5 year Firm-Fixed Price (FFP) Maintenance and Overhaul (M&O) Indefinite Delivery Indefinite Quantity (IDIQ) contract pursuant to Federal Acquisition Regulation (FAR) 52.216-22 using Sealed Bidding procedures under FAR Part 14.

A-3. The Cylinder and Piston Assy is not a Critical Safety Item (CSI). There is an adequate Depot Maintenance Work Requirement (DMWR):

DMWR-1-1620-243, Revision date: 06/15/2018, No Change #.

A-4. Reserved.

A-5.The FMS Customer and geographical location(s) for deliveries are unknown at this time.

A-6. Subject to the availability of funds, any quantities ordered will be priced at the unit price established for the ordering period in which they are ordered. Funds shall be obligated by issuance of delivery orders and not by the contract itself.

A-7. The minimum quantity of 200 each (US quantity) shall be obligated on the first delivery order, to be issued simultaneously with the award of the contract. Any additional quantities ordered will be priced at the Firm Fixed unit price in effect during the ordering period in which they are ordered and will not exceed the maximum quantity of 1,200 each including 200 each for FMS.

A-8. The Government will not be required to obtain the contractor's signature prior to the issuance of an order.

A-9. The Government intends to award only one Firm-Fixed Price Indefinite Delivery, Indefinite Quantity (IDIQ) contract as a result of this solicitation to the responsible bidder whose bid, conforming to the invitation for bids, will be the most advantageous to the

Government, considering only price and the price-related factors included in the invitation.

A-10. The Government has segregated the estimated quantities into five ordering periods. However, this does not preclude exercising the

Government's right under FAR 52.216-19 by ordering the maximum quantity specified in FAR 52.216-19(b)(1) at any time during the five year ordering period.

Ordering Period 1 will be from date of contract award through 365 days after contract award (DACA).

Ordering Period 2 will be from 366 DACA through 730 DACA.

Ordering Period 3 will be from 731 DACA through 1,095 DACA.

Ordering Period 4 will be from 1,096 DACA through 1,460 DACA.

Ordering Period 5 will be from 1,461 DACA through 1,825 DACA.

A-11. Please insert your firm fixed unit prices for the 1st, 2nd, 3rd, 4th, and 5th ordering periods in the spaces provided under each

CLIN/SubCLIN.

A-12. The offer acceptance period is 120 days from the date for receipt of offers specified in Block 8, unless a different period is stated in the offeror's bid.

A-13. No Government Furnished Material (GFM) will be provided.

A-14. Electronic submissions for bids are authorized and is the only method of submission. Proposals should be emailed to erica.n.burnette.civ@army.mil and lindy.l.pinchon.civ@army.mil. Facsimile submissions are not authorized.

A-15. The Government will not accept hard copies of bids delivered by mail or hand.

2 72

W58RGZ-23-B-0031

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

A-16. Overhaul shall be performed IAW DMWR-1-1620-243, Revision date: 06/15/2018, No Change #.

A-17. There are no critical characteristics for this item.

A-18. Reserved.

A-19. The contractor may be required to submit certified cost or pricing data if only one offer is received IAW DFARS Clause 252.215-

7008, entitled "Only One Offer."

A-20. The contractor is instructed to put the following words in the remarks column of the DD 250/WAWF: "Repair and Return Process

D6M".

A-21. Access to DLA FedMALL (formerly known as EMALL) is NOT authorized. ___

A-23. The following websites are provided for the purpose of obtaining/reviewing various Army publications and technical manuals/bulletins:

A. https://logsa.army.mil/etms/online.cfm - Technical Manuals and Bulletins

B. http://www.pubs.army.mil/ - DA Pamphlets and Army Regulations

A-24. COMPLETE THE FOLLOWING CONTRACTOR POINT OF CONTACT INFORMATION:

NAME: _________________________________________

TELEPHONE NUMBER: _____________________________

FAX NUMBER: ___________________________________

E-MAIL ADDRESS: _______________________________

A-25. TECHNICAL DATA CAN ONLY BE DISTRIBUTED TO CONTRACTORS WHO HAVE A CURRENT DD 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT ON

FILE WITH DEFENSE LOGISTICS INFORMATION SERVICES (DLIS). TECHNICAL DATA THAT IS EXPORT-CONTROLLED MUST BE MARKED WITH AN EXPORT CONTROL

WARNING NOTICE. THIS STATEMENT IDENTIFIES TECHNICAL DATA WHICH THE DOD WILL WITHHOLD FROM PUBLIC RELEASE USING AUTHORITY IN 10

U.S.C.130, THE GOVERNMEN'S RIGHT TO USE, MODIFY, REPRODUCE, PERFORM, DISPLAY, OR DISCLOSE SUCH TECHNICAL SUCH TECHNICAL IS RESTRICTED

FOR THE CONTRACTOR/ITS SUBSIDIARIES/OR SUB-CONTRACTORS' AT EVERY LEVEL. ANY REPRODUCTION OF TECHNICAL DATA OR PORTIONS THEREOF MARKED

WITH THESE LEGENDS MUST ALSO REPODUCE THESE LEGENDS ON SUCH TECHNICAL DATA. CONTRACTORS WANTING TO OBTAIN ACCESS TO THE UNCLASSIFIED

TECHNICAL DATA DRAWINGS MUST HAVE JOINT CERTIFICATION PROGRAM (JCP) CERTIFICATION. INSTRUCTIONS FOR OBTAINING JCP CERTIFICATION CAN BE

FOUND AT:

HTTPS://PUBLIC.LOGISTICSINFORMANTIONSERVICE.DLA.MIL/PUBLICHOME/JPC/DEFAULT.ASPX

If you would like to request a copy of the Depot Maintenance Work Requirement (DMWR) and or applicable Maintenance Engineering Orders

(MEOs) please submit your request via e-mail to Edward McConnell at edward.n.mcconnell1.civ@army.mil along with a completed form DD2345.

If after three business days of submitting this request there is no response, the Contractor may forward the email request to contract specialist for further inquiry.

SOLICITATION PERIOD WILL NOT BE EXTENDED AS A RESULT OF LATE REQUEST FOR TECHNICAL DATA.

A-26. The Contractor shall comply with the Total Asset Visibility- contractor (TAV-C) reporting requirements, as outlined in Attachment

0009 - Contractor Repair TAV-C Requirements.

A-27. Due to a system error, the references to clauses 252.203-7002 and 252.243-7002 in Section I of this contract do not indicate the correct, latest versions. Notwithstanding the references in Section I, the intent is to use the current versions of those clauses, which are:

(a) DFARS Clause 252.203-7002, Requirement to Inform Employees of Whistleblower Rights, Dec 2022

(b) DFARS Clause 252.243-7002, Requests for Equitable Adjustment, Dec 2022.

3 72

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

*** END OF NARRATIVE A0001 ***

4 72

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

0001 PRODUCT VERIFICATION AUDIT

0001AA PRODUCT VERIFICATION AUDIT (PVA) $ ________________________________ __________________

SERVICE REQUESTED: PRODUCT VERIFICATION AUDIT

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN represents the Product Verification Audit

(PVA) for the Cylinder and Piston, output NSN: 1620-

01-625-2795,as shown in CLINs 0002AA, 0002AB, 0003AA and 0003AB.

This is a Firm Fixed Price CLIN.

Offeror is required to fill in a proposed firm fixed unit price for the PVA:

PVA shall be in accordance with The "Product

Verification Audit (PVA) Statement of Work".

PVA shall be conducted within 90 days after receipt of reparables. The Contractor shall prepare 3 assets for PVA. The Contractor is required to notify the

Government Quality Office for scheduling of the PVA by email to the following address:

usarmy.redstone.devcom-avmc.mbx.amr-mq-contracts@army.mil

With copy emailed to the Contract Specialist at:

erica.n.burnette.civ@army.mil

The Contractor will prepare and forward, through the cognizant Government Quality Element, finalized audit reports within 10 working days after completion of the PVA to the email address above.

NOTE: A copy of the cover letter for the report shall be e-mailed to the Contract Specialist at:

erica.n.burnette.civ@army.mil usarmy.redstone.acc.list.acc-rsa-mo-post-award@army.mil

PVA requires approval prior to Government acceptance of contract deliverable assets.

Failure to pass the PVA may lead to Termination for____________________________________________________

Default of the contract.________________________

5 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Payment Instructions: The Contractor will be paid for_____________________ the PVA by utilizing the Wide Area Work Flow (WAWF) site. The Contractor must enter code W58H0Z when submitting the PVA invoice, making it to the attention of Lindy Pinchon. The Contracting Officer will approve the PVA invoice.

(End of narrative C001)

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

0002 CYLINDER AND PISTON ASSY

NSN: 1620-01-625-2795

Mfr CAGE: 81996

Mfr Part Number: 70250-13101-046

The minimum quantity for this solicitation is 200 and the maximum US quantity is 1,000. For planning purposes, this solicitation assumes the quantities will be evenly split across CLINs

0002AA and 0002AB however, the exact quantity applicable to each CLIN may vary. The quantity could be placed under CLIN 0002AA or CLIN 0002AB or consist of any possible combination of quantities from these CLINs.

No US quantity is guaranteed beyond the minimum of 200.

(End of narrative A001)

0002AA OVERHAUL/UPGRADE CYLINDER AND PISTON ASSY (US QTY) $ $ __________________________________________________ ______________ __________________

COMMODITY NAME: CYLINDER AND PISTON ASSY

CLIN CONTRACT TYPE:

Firm Fixed Price

Estimated yearly quantities for CLIN 0002AA are:

Ordering Period 1: 100 each minimum qty

Ordering Period 2: 100 each estimated qty

Ordering Period 3: 100 each estimated qty

Ordering Period 4: 100 each estimated qty

Ordering Period 5: 100 each estimated qty

Funds for the ordering period 1 quantity set

6 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

forth herein shall be obligated on the first delivery order, to be issued simultaneously with the award of the firm fixed price contract.

(End of narrative B001)

INPUT NSN: 1620-01-421-0890

INPUT P/N: 70250-13101-044

OUTPUT NSN: 1620-01-625-2795

OUTPUT P/N: 70250-13101-046

Overhaul/Upgrade shall be in accordance with Section

C entitled 'Statement of Work'.

This Firm Fixed Price (FFP) CLIN includes all mandatory and nonmandatory parts, labor charges, preservation, packaging, packing, marking, and data items necessary to return the unit, to a serviceable condition, as stated in section C, Statement of Work.

Offeror is required to fill in proposed firm fixed unit price: US Qty 500 __________

Ordering Period 1- $_________ EST Qty 100 ea

Ordering Period 2- $_________ EST Qty 100 ea

Ordering Period 3- $_________ EST Qty 100 ea

Ordering Period 4- $_________ EST Qty 100 ea

Ordering Period 5- $_________ EST Qty 100 ea

(End of narrative C002)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-129R WITH CHANGE 3 MARKINGS APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: B

For Packaging Requirements refer to Section J

Attachment 0001 M&O Packing requirrements.

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

7 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

FOB POINT: Origin

Refer to the Narratives entitled "Delivery Schedule" and "Delivery of Additional Quantities" in section F for the Government's Required Delivery Schedule.

(End of narrative F001)

0002AB OVERHAUL CYLINDER AND PISTON ASSEMBLY (US) $ $ ___________________________________________ ______________ __________________

COMMODITY NAME: CYLINDER AND PISTON

CLIN CONTRACT TYPE:

Firm Fixed Price

Estimated yearly quantities for CLIN 0002AB are:

Ordering Period 1: 100 each minimum qty

Ordering Period 2: 100 each estimated qty

Ordering Period 3: 100 each estimated qty

Ordering Period 4: 100 each estimated qty

Ordering Period 5: 100 each estimated qty

Funds for the ordering period 1 quantity set forth herein shall be obligated on the first delivery order, to be issued simultaneously with the award of the firm fixed price contract.

(End of narrative B001)

INPUT NSN: 1620-01-625-2795

INPUT P/N: 70250-13101-046

OUTPUT NSN: 1620-01-625-2795

OUTPUT P/N: 70250-13101-046

Overhaul shall be in accordance with Section C entitled 'Statement of Work'.

This Firm Fixed Price (FFP) CLIN includes all mandatory and nonmandatory parts, labor charges, preservation, packaging, packing, marking, and data items necessary to return the unit, to a serviceable condition, as stated in section C, Statement of Work.

Offeror is required to fill in proposed firm fixed unit price: US Qty 500 __________

8 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Ordering Period 1- $_________ EST Qty 100 ea

Ordering Period 2- $_________ EST Qty 100 ea

Ordering Period 3- $_________ EST Qty 100 ea

Ordering Period 4- $_________ EST Qty 100 ea

Ordering Period 5- $_________ EST Qty 100 ea

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-129R WITH CHANGE 3 MARKINGS APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: B

For Packaging Instructions refer to Section J

Attachment 0001 M&o Packaging requirements.

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

Refer to the Narratives entitled "Delivery Schedule" and "Delivery of Additional Quantities" in section F for the Government's Required Delivery Schedule.

(End of narrative F001)

0003 CYLINDER AND PISTON ASSY

NSN: 1620-01-625-2795

Mfr CAGE: 81996

Mfr Part Number: 70250-13101-046

0003AA OVERHAUL/UPGRADE CYLINDER AND PISTON ASSY (FMS ______________________________________________

QTY) $ $ ____ ______________ __________________

COMMODITY NAME: CYLINDER AND PISTON ASSY

9 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

CLIN CONTRACT TYPE:

Firm Fixed Price

Estimated yearly quantities for CLIN 0003AA are:

Ordering Period 1: 0 each minimum qty

Ordering Period 2: 25 each estimated qty

Ordering Period 3: 25 each estimated qty

Ordering Period 4: 25 each estimated qty

Ordering Period 5: 25 each estimated qty

This CLIN will be used only if a FMS Customer requires this item. If no FMS Customers are identified, the US Army Requirer may utilize the

FMS quantity.

(End of narrative B001)

INPUT NSN:

1620-01-421-0890

INPUT P/N:

70250-13101-044

OUTPUT NSN: 1650-01-625-2795

OUTPUT P/N: 70250-13101-046

Overhaul/Upgrade shall be in accordance with Section

C entitled 'Statement of Work'.

This Firm Fixed Price (FFP) CLIN includes all mandatory and nonmandatory parts, labor charges, preservation, packaging, packing, marking, and data items necessary to return the unit, to a serviceable condition, as stated in section C, Statement of Work.

Offeror is required to fill in proposed firm fixed unit Price:

Ordering Period 1- $_________ EST Qty 0 ea

Ordering Period 2- $_________ EST Qty 25 ea

Ordering Period 3- $_________ EST Qty 25 ea

Ordering Period 4- $_________ EST Qty 25 ea

Ordering Period 5- $_________ EST Qty 25 ea

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-129R WITH CHANGE 3 MARKINGS APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

10 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

LEVEL PRESERVATION: Military

LEVEL PACKING: B

All Wood Packaging Material (WPM) must be ISPM-

15 compliant.

For packaging Instructions refer to Section J

Attachment 0001. M & O Packaging Instructions.

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

Refer to the Narratives entitled "Delivery Schedule" and "Delivery of Additional Quantities" in section F for the Government's Required Delivery Schedule.

(End of narrative F001)

0003AB OVERHAUL CYLINDER AND PISTON ASSY (FMS QTY) $ $ ____________________________________________ ______________ __________________

COMMODITY NAME: CYLINDER AND PISTON ASSY

Estimated yearly quantities for CLIN 0003AB are:

Ordering Period 1: 0 each minimum qty

Ordering Period 2: 25 each estimated qty

Ordering Period 3: 25 each estimated qty

Ordering Period 4: 25 each estimated qty

Ordering Period 5: 25 each estimated qty

This CLIN will be used only if a FMS Customer requires this item. If no FMS Customers are identified, the US Army Requirer may utilize the

FMS quantity.

(End of narrative B001)

INPUT NSN: 1620-01-625-2795

INPUT P/N: 70250-13101-046

OUTPUT NSN: 1650-01-625-2795

OUTPUT P/N: 70250-13101-046

11 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Overhaul shall be in accordance with Section C entitled 'Statement of Work'.

This Firm Fixed Price (FFP) CLIN includes all mandatory and nonmandatory parts, labor charges, preservation, packaging, packing, marking, and data items necessary to return the unit, to a serviceable condition, as stated in section C, Statement of Work.

Offeror is required to fill in proposed firm fixed unit Price:

Ordering Period 1- $_________ EST Qty 0 ea

Ordering Period 2- $_________ EST Qty 25 ea

Ordering Period 3- $_________ EST Qty 25 ea

Ordering Period 4- $_________ EST Qty 25 ea

Ordering Period 5- $_________ EST Qty 25 ea

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

MIL-STD-129 R WITH CHANGE 3 MARKINGS APPLY

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: B

All Wood Packaging Material (WPM) must be ISPM-

15 compliant.

For packaging Instructions refer to Section J

Attachment 0001. M & O Packaging Requirements.

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

Refer to the Narratives entitled "Delivery Schedule" and "Delivery of Additional Quantities" in section F for the Government's Required Delivery Schedule.

(End of narrative F001)

12 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0004 CYLINDER AND PISTON ASSY.

0004AA SCRAP $ __________________________ __________________

SERVICE REQUESTED: CYLINDER AND PISTON ASSY.

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is for assets which are Beyond

Economical Repair (i.e., scrap) from CLINs

0002AA, 0002AB,0003AA and/or 0003AB.

Offeror is required to fill in a proposed firm fixed unit price for each ordering period:

Ordering Period 1 $____________ EACH

Ordering Period 2 $____________ EACH

Ordering Period 3 $____________ EACH

Ordering Period 4 $____________ EACH

Ordering Period 5 $____________ EACH

(End of narrative B001)

Scrapped assets from CLINs 0002AA, 0002AB, 0003AA and 0003AB shall be in accordance with the Statement of Work.

As applicable on delivery orders issued, units determined to be scrapped in accordance with

Section C shall be reflected as an increase in

CLIN 0004AA with a corresponding decrease in quantity and funds in CLINs CLINs 0002AA, 0002AB, 0003AA, and 0003AB and/or

0003AA, as applicable.

In the event the Procuring Contracting Officer

(PCO) determines that certain items shall be scrapped, the contractor shall scrap such items at the fixed unit price in Section B hereof and make disposition in accordance with the contractor's approved Government property procedures.

The Government may, at it's discretion, replace any items scrapped by input of additional assets and said scrap quantities will not count as part of the total maximum quantity.

Scrap requires authorization by the PCO via

13 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

formal modification. In no event shall the contractor scrap an item prior to receiving a contractual modification for a unit.

(End of narrative C001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: ORIGIN

Refer to the Narrative entitled "Delivery Schedule" and "Delivery of Additional Quantities" in Section F for the Government's Required Delivery Schedule.

(End of narrative F001)

0005 CYLINDER AND PISTON ASSY

0005AA CONTRACTOR FURNISHED CONTAINERS $ _______________________________ __________________

SERVICE REQUESTED: CYLINDER AND PISTON ASSY

CLIN CONTRACT TYPE:

Firm Fixed Price

These prices apply to US and FMS reusable containers.

Offeror is required to fill in proposed firm-fixed unit price for all 5 ordering periods:

Ordering Period 1 $________ EST Qty 1 ea ________

Ordering Period 2 $________ EST Qty 1 ea ________

Ordering Period 3 $________ EST Qty 1 ea ________

Ordering Period 4 $________ EST Qty 1 ea ________

Ordering Period 5 $________ EST Qty 1 ea ________

The contractor shall provide containers IAW

Attachment 0001, M&O Packaging Requirements and the

Statement of Work and reusable containers.

The Government cannot determine, at the time of contract award, how many of the assets to be overhauled will be received by the Contractor in unserviceable containers or received without

14 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

containers.

Supplemental Information: CAP/PLUG, COIL IN CUSH IN

BAG (BS) WITHIN BOX (ED)

(End of narrative C001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

0006 CONTACTOR DATA REQUIREMENTS LIST ________________________________

This CLIN is "Not Separately Priced" (NSP). Pricing for data shall be included in the unit prices of

CLINs 0002AA,0002AB 0003AA and 0003AB.

The Contractor shall provide Data Items A001 - A004 in accordance with the Contract Data Requirements

List, Exhibits A thru D.

(End of narrative A001)

A001 GOVERNMENT PROPERTY INVENTORY REPORT $ ** NSP ** ____________________________________ __________________

SERVICE REQUESTED: GOV'T PROPERTTY INVENTORY RPT

DATA ITEM A001-DI-MGMT-80441D-Government Property

Inventory Report

(End of narrative C001)

Deliveries or Performance _________________________

15 72

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

A002 REPORT OF SHIPPING AND PACKAGING DISCREPANCY $ ** NSP ** ____________________________________________ __________________

SERVICE REQUESTED: REPORT OF SHIPPING

DATA ITEM A002 - DATA ACQUISITION DOCUMENT NUMBER: DI-

MGMT-80503

(End of narrative C001)

Deliveries or Performance _________________________

A003 M&O PLAN_TECHNICAL REPORT-STUDY SERVICES $ ** NSP ** ________________________________________ __________________

SERVICE REQUESTED: M&O PLAN

DATA ITEM A003- DATA ACQUISITION DOCUMENT NUMBER: DI-

MISC-8058B

(End of narrative C001)

Deliveries or Performance _________________________

A004 TAMMS-A - LOGISTICS PRODUCT DATA $ ** NSP ** ________________________________ __________________

SERVICE REQUESTED: TAMMS-A

DATA ITEM A001 - DATA ACQUISITION DOCUMENT NUMBER DI-

SESS-81758A

(End of narrative C001)

Deliveries or Performance _________________________

16 72

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Statement of Work for

NSN: 1620-01-421-0890 and 1620-01-625-2795

PRID: AB878

P/N: 70250-01-13101-044 and 70250-13101-046

Status: R

a. The Contractor shall furnish all services, facilities, labor, parts, materials, equipment, tools, and data (other than Government

Furnished Property), necessary to accomplish the inspection and overhaul/upgrade for the CYLINDER AND PISTON ASSEMBLY for the UH-60

(hereinafter the component) that is required to return the component to a serviceable condition sufficient to meet the standard of continued airworthiness IAW Army Regulation (AR) 70-62. Upon completion of the overhaul/upgrade, the overhauled/upgraded components shall be packaged IAW with this contract and shipped to the destination(s) specified in each individual delivery order.

b. Prior to commencement of overhaul/upgrade, the Contractor shall disassemble and inspect the component to the extent necessary to determine if the component is physically unrepairable or has suffered abnormal or catastrophic damage. If the latter condition exists, the Contractor shall notify the Procuring Contracting Officer (PCO) through the cognizant Administrative Contracting Officer (ACO) and shall discontinue the overhaul/upgrade until given further instructions or the authorization for disposition of the component by the

PCO.

c. In the event the PCO determines that certain items should be scrapped, the contractor shall scrap such items at the fixed unit price in Section B. In IAW DFARS Clause 252.245-7004 Reporting, Reutilization, and Disposal (Deviation 2022-O0006), included in this contract, the Contractor shall complete the Plant Clearance Inventory Schedule using the Plant Clearance capability of the

Government Furnished Property (GFP) Module of the Procurement Integrated Enterprise Environment (PIEE), an electronic equivalent of the

Standard Form 1428, Inventory Disposal Schedule. Users may register for access and obtain training on the PIEE home page https://wawf.eb.mil/piee-landing . Such scrapped components shall count toward the quantities ordered and the Government can replace any components scrapped by the Contractor.

d. The Government has an adequate Depot Maintenance Work Requirement (DMWR) for this effort, DMWR-1-1620-243 dated 15 June 2018.

e. Critical Safety Item: The Cylinder and Piston Assembly is not a critical safety item (CSI).

f. Upon receipt of the components, contractor shall inspect containers for serviceability. Containers shall be considered serviceable unless one or more of the following conditions exist: (1) containers are structurally damaged to include functional damage to the suspension system, cracks or holes to the container hull, hull deformity to the extent the container cannot be closed (or sealed where required), or dents that will interfere with the envelope; (2) corrosion has progressed to the point where fit, function or the life of the container is affected. Components received without containers or containers determined to be unserviceable shall be processed IAW the Contractor's locally approved Government-furnished Property (GFP) procedures. Components received improperly packaged, damaged with corrosion/deterioration or those with shipping discrepancies shall be reported IAW DI-MGMT-80503, CDRL A001 for CLIN's 0002AA, 000A2B, 0003AB, and 0003AB.

g. Government-furnished Property (GFP) Attachment: The components being provided to the Contractor are identified and tracked as GFP.

The Contractor shall maintain a system of internal controls to manage (control, use, preserve, protect, repair, and maintain) GFP in its possession IAW FAR 52.245-1, and its property management system shall satisfy the requirements of this clause. The contractor shall record the acquisition, receipt, shipment, consumption, disposal of GFP, and any transfer to another contract utilizing the GFP Module in the Procurement Integrated Enterprise Environment (PIEE), https://piee.eb.mil , as required by the DFARS PGI 245.103-72

Government-furnished Property Attachments to Solicitations and resultant contracts. GFP training and guidance is located at the DoD

Procurement Toolbox at https://dodprocurementtoolbox.com/ .

h. Contractor shall comply with U.S. Army Technical Manual (TM) 1-1500-345-23 w/change 1, July 7, 2015, Painting and Marking of Army

Aircraft, or most recent version, if painting is required in the performance of this contract.

i. Contractor shall submit required data IAW the Contract Data Requirements List (CDRL) DD Form 1423, Exhibit A electronically to the addresses indicated on the DD Form(s) 1423.

j. Product Verification Audit (PVA): The Contractor shall conduct the PVA IAW the detailed instructions as specified in Section E of the solicitation and resultant contract.

k. The Army Maintenance Management System - Aviation (TAMMS-A): The Contractor shall prepare TAMMS-A data IAW DI-SESS-81758 and the

TAMMS-A instructions attached to the solicitation and resultant contract. The Contractor shall complete the forms and records as specified in Department of the Army Pamphlet (DA PAM) 738-751and Technical Manual (TM) 1-1500-328-23 as detailed in the attached TAMMS-A

17 72

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

instructions. the AMCOM TAMMS-A Customer Support Office (AMAM-OPL), is reachable via email at usarmy.redstone.amcom.mbx.g3m-snrr@army.mil.

l. Product Quality Deficiency Reports (PQDRs): When requested, the Contractor shall assist the cognizant Contract Administration Office in evaluating PQDRs) and exhibits for defects reported on components overhauled/upgraded under this contract to determine the root cause for deficiencies. These defects may be reported from field or depot organizations. Corrective action to prevent repeat discrepancies shall be an integral part of the Contractors Quality Program. The Contractor shall utilize the Product Data Reporting and Evaluation

Program (PDREP) to submit a PQDR at https://www.pdrep.csd.disa.mil/pdrep_files/report_tools/pqdr.htm IAW AR 702-7-1, Reporting of Product Quality Deficiencies within the U.S. Army, 13 April 2020.

m. The items the Contractor shall overhaul/upgrade are identified below:

Input NSN P/N

1620-01-421-0890 70250-13101-044

1620-01-625-2795 70250-13101-046

Output NSN P/N

1620-01-625-2795 70250-13101-046

n. The overhaul/upgrade planned quantity for 5 years is Minimum 200, Maximum 1,200. Input will be 30 days after receipt of order. Output shall be as specified in the solicitation and resultant contract schedule. Serviceable assets shall be returned to DODAAC W25G1U, Plant

7002.

1st year qty 200 4th year qty 250

2nd year qty 250 5th year qty 250

3rd year qty 250

o. Transactional Inventory Procedures - The contractor shall prepare the following reports:

1. The contractor shall complete and retain a signed copy of DD Form 1348-1A, receipt for repairable on all shipments. The contractor shall complete the DD Form 1348-1A and include a signature to evidence shipment and receipt. Printed names, name/date stamps, and initials shall not be acceptable. If a DD Form 1348-1A is not delivered with the shipment, a DD Form 1348-1A is located at:

https://www.dla.mil/Disposition-Services/DDSR/Turn-In/1348-Help/

The contractor shall prepare this form and include the following corresponding receipt information:

A. Document Number - (Positions 30-44)

B. National Stock Number (NSN) - (Positions 8-22)

C. Condition Code - (Position 71)

D. Unit Price - (Positions 74-80)

E. Total Price - (Block 1)

F. Actual Quantity Received - (Block 10)

G. Nomenclature - (Block 17)

H. Signature and Date - (Blocks 22 and 23)

For questions with the above information, please contact: usarmy.redstone.usamc.mbx.immc-smb-ammo@army.mil

2. The Contractor shall perform an annual inventory of all GFP, including items for overhaul/upgrade and any contractor-acquired property such as containers during the period of performance of this contract. This shall include any subcontractor inventories where

GFP has been provided by the Government for overhaul/upgrade. Contractor shall provide all results, findings, and corrective actions of any annual physical inventories to the Government IAW FAR Clause 52.245-1(f)(1)(iv), Physical Inventory. The contractor shall prepare a physical inventory report IAW DI-MGMT-80441D.

3. The Contractor shall comply with the Total Asset Visibility - Contractor (TAV-C) reporting instructions IAW Attachment 0010

"Contractor Repair TAV-C Requirements".

p. Foreign Military Sales (FMS): Contractor shall segregate US quantities and FMS quantities and must keep segregated at all times while in transit and in storage and shall flow down this requirement to all subcontractors.

q. RESERVED

r. Item Unique Identification (IUID): The Contractor shall apply IUID IAWMIL-STD-130, latest version, AR 700-145, Item Unique

Identification, December 16, 2020, and DA Pamphlet (PAM) 700-145, IUID Procedures, 20 May 2022, DFARS 211.274-2 Policy for item unique identification, which requires in paragraph (a)(3)(i) that IUID is required regardless of value for any DoD serially managed item

(reparable or nonrepairable) or subassembly, component, or part embedded within a subassembly, component, or part... All registered

Unique Item Identifiers (UIIs) shall be maintained as received and any UIIs created for component received without one, shall follow any published documentation, such as DMWRs or Maintenance Engineering Orders. In the absence of these documents, Contractors must strictly adhere to the procedures outlined in the MIL-STD-130N. Maintaining a UII as received means the construction of the UII string shall not change; however, the UII can and will receive updates to the associated data, such as Marks, PN Rollovers, within the DoD IUID National

18 72

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Registry. Any questions about the IUID program should be directed toward the AMCOM IUID helpdesk at 256-425-8566 or usarmy.redstone.amcom.mbx.immc-sim-iuid@army.mil.

s. Shipping Containers and Shipment: Contractor shall utilize the packaging requirements contained in Attachment 0001, M&O Packaging Requirements. If containers are not reparable or if assets are not delivered in the approved containers, the containers shall be Contractor-furnished property. The method of shipment must include tracking of all packages for maintaining Government property accountability and visibility. Contractor must comply with MIL-STD-2073-1E w/change 4, DOD Standard Practice for Military Packaging and

MIL-STD-129R wjtb change 3, DOD Standard Practice for Military Marking for Shipment and Storage. The Contractor shall package electronic parts susceptible to static discharge damage IAW ANSI/ESD S20.20-2021 Protection of Electrical and Electronic Parts, Assemblies and

Equipment (Excluding Electrically Initiated Explosive Devices). Each individual repaired item must include a copy of all forms required by The Army Maintenance Management System Aviation (TAMMS-A).

t. Overhaul Plan Documentation: The contractor shall provide documentation IAW DI-MISC-80508. The documentation shall include all legacy

(existing) technical information, procedures, and processes (e.g., Overhaul/Repair travelers, workbooks, commercial manuals, drawings, specifications, planning, Federal Aviation Administration (FAA) approved documentation) that the contractor utilized or shall utilize in the overhaul of the item. The documentation may be in contractor format.

*** END OF NARRATIVE C0001 ***

19 72

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

For FAR clauses: https://www.acquisition.gov/

For DFARS clauses: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

E-1 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

E-2 52.246-4 INSPECTION OF SERVICES--FIXED-PRICE AUG/1996

E-3 52.246-15 CERTIFICATE OF CONFORMANCE APR/1984

E-4 52.246-16 RESPONSIBILITY FOR SUPPLIES APR/1984

E-5 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT DEC/2014

(a) The contractor shall comply with the higher-level quality standard(s) listed below.

ISO 90001:2000 Equivalent

(b) The contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts in--

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require--

(i) Control of such things as design, work operations, in-process control, testing and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

E-6. Product Verification Audit (PVA) Contract Requirements (June 2022 update)

PURPOSE. This PVA requirement establishes/assigns responsibilities for insertion of PVA procedures into overhaul work directives, maintenance data packages, and contract documents along with procedures and instructions to be applied in performing PVAs during overhaul, maintenance, modification kit installation, rework, remanufacture, manufacturing, and new procurement contracts. The PVA candidate(s) are used to evaluate that the contractor processes and procedures are adequate to ensure component integrity.

(A) The Contractor shall perform and present for acceptance THREE units as specified in this contract. This clause does not supersede instructions contained in depot overhaul work requirements, commercial overhaul manuals, new manufacture technical requirements or other applicable documents. It does not relieve the contractor from maintaining a quality system that will assure items conform to contractual requirements. Contractors may request to delay scheduled PVAs in frequency or waive PVA requirements of selected items in cases where accumulated objective evidence indicates that a consistent quality item is being delivered. PVA actions will be based on the overall performance history, failure impact, supply impact, length of program, and nonscheduled PVAs accomplished by the

Systems Readiness Directorate (SRD). Like or similar items may be grouped for these purposes provided concurrence is obtained from SRD

Quality Management Division. The contractor may be directed by the Procuring Contracting Officer (PCO) to increase or decrease the scope of a PVA pursuant to the "Changes" clause of the contract for non-commercial items. If however this procurement is for a commercial item, the contractor and the Contracting Officer (CO) will need to enter into a bilateral contract modification to increase or decrease the scope of a PVA.

(B) The Contractor shall,

(1) With the concurrence of SRD Quality Management Division (QMD), schedule and perform PVA as required by the terms of the contract or as otherwise required.

(2) Notify PCO with information copy to the SRD QMD, ATTN, usarmy.redstone.devcom-avmc.mbx.qs-contracts@army.mil of the date the PVA candidates will be available. Notification shall be provided at least 20 working days prior to the selected date if facilities are within the Continental United States. If facilities are outside the Continental United States, notification shall be provided at least

95 working days prior to the selected date to allow sufficient time for travelers to gain theater clearance.

(3) Provide technical personnel tooling, measuring and test equipment, work area, forms, and clerical assistance, as required, to perform the PVA. If test cell or other specialized equipment is required; notification of readiness for PVA shall include the availability of these.

20 72

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(C) The PVA candidate will be selected by the SRD PVA Team Chairman at random from the three (3) tendered candidates for acceptance to the Government. For reoccurring audits, if any, the audit candidate will be selected by the PVA Team Chairman from all completed items currently available.

(1) Alternate Procedure. Normally, three assets are required to be completed at time of PVA. If in the PVA Team Chairman's judgment it is in the best interest of the Government, an alternative approach may be taken due to circumstances such as shortage of overhaul assets, shortage of replacement parts, time constraints, or other considerations. At the PVA Team Chairman's discretion, only one PVA candidate may be required to be completed while the other two assets can be in various stages of overhaul as agreed upon (prior to the beginning of the PVA) between the PVA Team Chairman and the facility to be audited. For instance, one asset could be disassembled and ready for Overhaul Inspection Procedures, while the other may be prepared for a critical process such as acceptance testing. (This approach is particularly helpful if the critical process is performed by a subcontractor.) For reoccurring audits, if any, the audit candidate will be selected by the PVA Team Chairman from all completed items currently available.

(D) The item selected for PVA will be inspected for adherence to preservation, packaging, and marking requirements prior to removal from the shipping container. A visual inspection and functional test will be performed prior to disassembly.

(E) The PVA Team will review the shop travelers, production processes, procedures, tooling, and, equipment used to maintain, overhaul, repair, or manufacture the item being audited for adequacy and conformance to the contractual requirements. The PVA will include verification through objective evidence that all of the inspection, testing, measuring and diagnostic equipment used in the inspection/test of the PVA candidate are maintained in accordance with applicable calibration standards.

(F) Disassembly for overhauled items will be performed in an area accessible only to audit personnel. Normally, audit participation will be limited to specified production and quality assurance personnel of the contractor activity, the cognizant government Quality

Assurance Representative (QAR), and the SRD PVA Team Chairman and team personnel.

(G) Visual inspection, dimensional checks (such as backlash, end clearance, running clearance, etc.) and nondestructive testing are accomplished during and after disassembly IAW applicable technical directives. Findings are recorded for comparison with historical data and conformance evaluation. A 100% inspection (or as set forth in relevant specifications) of all physical characteristics, to include but not limited to any dimensions, certifications for materials, processes and/or procedures, as well as any other requirements which may be set forth by other applicable specifications, or in any procurement packages, technical drawings. Depot Maintenance Work

Requirements (DMWRs), Maintenance Engineering Orders (MEOs), and/or any other special/functional testing as set forth in this contract.

(H) Applicable accessories and components will be functionally tested and inspected to contractual/work specifications. The PVA team will review subcontractor certifications for testing and inspections. At the request of the PVA Team Chairman, processes (such as Shot peening, heat treating, etc.) performed by subcontractors may also be audited. Contractor shall be able to demonstrate that all testing/ inspection procedures, and acceptance methods are documented in the appropriate area of the overhaul documents, and are approved and controlled by management.

(I) The PVA item shall be reassembled and functionally tested IAW applicable specifications and made ready for Government acceptance including preservation, packaging, marking, and update of historical records and all applicable documentation.

(J) Conduct of the PVA will be planned in a manner that adequately allows examination/audit of all procedures involved. Each step in the process shall be analyzed to determine compliance to specifications. It may not be logical or possible, due to time constraints, to track the same item throughout the PVA; therefore, at the SRD PVA Team Chairman's discretion, examination of representative assemblies any may be used as evidence of compliance to specification requirements. The SRD PVA Team Chairman will determine the scope and detail of the PVA process. The SRD PVA Team Chairman may delegate follow-up actions to the DCMA QAR, when it is determined to be prudent to the

PVA.

(K) During the course of the PVA, the PVA Team Chairman may request progress meetings to provide status to the contractor. After the PVA is completed, the SRD PVA Team Chairman will conduct an exit critique attended by all concerned contractor personnel and the cognizant

DCMA QAR and PM Representative. The context of the audit findings and corrective actions will be discussed and any disputes will be resolved. Findings, classifications, and corrective actions will be discussed and determinations made as to cause of defect established

(i.e. workmanship, tooling, technical requirements, etc.).