Attachment_0001_to_FedBizOpps_Synopsis-Solicitaton_29AUG2019.docx

DEPARTMENT OF THE ARMY

U.S. ARMY CONTRACTING COMMAND

ABERDEEN PROVING GROUND

6565 SURVEILLANCE LOOP, BLDG 6001

ABERDEEN PROVING GROUND, MARYLAND 21005-1846

REPLY TO

ATTENTION OF CCAP-CCE

29 August 2019

SUBJECT: CECOM: ILSC: LAB Electronic and Communication Equipment, Sustainment Supplies and Equipment, Facilities Supplies and Equipment (Regional Supply Order)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

The U.S. Army Contracting Command-APG (ACC-APG) is requesting a Firm-Fixed-Price Quotation for Commercial-Off-the-Shelf (COTS) Electronic and Communication Equipment, Sustainment Supplies and Equipment, Facilities Supplies and Equipment. The NAICS Code applicable to this acquisition is 811219. This solicitation is a 100% Service Disabled Veteran Owned Small Business Set-Aside. Make sure your SAMs information is updated for the correct NAICS code and your representations are up to date. The solicitation number is W56JSR-19-R-0022.

Product Descriptions are below. Please respond to the requirement in the order of the list provided below:

B&K Prevision

•Graduation interval 0.5 •Scale: slope ±90, slope % •Adjustable diopter •Dual saphire bearing •Liquid filled capsule for stable operation •Accuracy 1/4° •Graduation interval 0.5° •Scale: slope ±90°, slope % •Adjustable diopter •Dual saphire bearing •Liquid filled capsule for stable operation Compass •Accuracy 1/3° •Graduation interval 0.5° •Scale: Azimuth 360°, Reversed 360° •Adjustable diopter •Saphire bearing •Liquid filled capsule for stable operation •Anodized light-alloy housing •Nylon pouch with belt-loop •Lanyard 2-year warranty •Made in Finland” Tandem/360PC/360R G Clino/Compass Suunto Tandem

Testo

Item Tamper Bit Ratcheting Screwdriver Set Sizes Included Spanner: #4, #6, #8, #10, Tamper Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2mm, 2.5mm, 3mm, 4mm, 5mm,Tamper Resistant Torx: T7H, T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, Tri-Wing: #1, #2, #3, #4, Torq-Set: #6, #8, #10, Adapter Overall Length 9" Includes Adapter Tether Capable Standard Tool (Accessory Needed for Tethering) Handle Design Ergonomic Driver Type 32-in-1 Primary Application General Purpose Ratcheting Yes Single End/Double End Single End Bit Retainer Type Magnetic Number of Pieces 32 Shank Type Solid Shank Material Alloy Steel Finish Chrome Screwdriver Bit Material S2 Steel Drive Size 1/4" Standards TXF-702 401K73

Westward

Weight Empty (Lb.) 17.2 Height (In.) 17-15/16 Width (In.) 9-1/16 Collar 7-1/2 Base 8-1/16 Capacity (kg/Lb.) 11.84/26.1 Volume 722.5 cu. in.

Service Rating 400 psi For Use With CFC, HCFC and HFC Recovered or Virgin Refrigerants Finish Powder Coated, High Gloss Dual Port Connection Serves as a Liquid or Vapor Valve Agency Compliance DOT-4BA and ARI Guidelines Use With Liquid Level Sensor (4LZH4) or Scale Includes 3/4" Plug 4LZH2/Agency Compliance: DOT-4BA and ARI Guidelines

FLIR

40291/

54YE27 / 54E29

Material PVC/Polyester Apron Primary Material Nylon/PVC/Vinyl Resistant To Acids, Chemicals Length 45" Width 35" Standards ASTM D 6413-99,CSPC 16CFR 1611 Seam Style Raw Thickness 18 mil Size 48" x 35" Apron Waist Closure Type Ties Apron Neck Closure Type Ties Number of Pockets 0 Grommet Type Metal Color Green 4T299

Condor

•Ultratip 1.0mm Needle Tip 70-01-01 •Ultratip 3.3mm Chisel Tip 70-01-02 •Ultratip 0.5mm Needle Tip 70-01-05 •Ultratip Hot Knife 70-01-16 •Hot Air Tip 70-01-52 •Shrink Attachment 70-01-55 •Sponge, Cap and Rugged Plastic Carrying Case

UT-100SITC

Master Appliance

(Ah) 2.4 30251218

Dewalt

Analog Bandwidth 0 - 200 kHz Max. Sample Rate 1 Msps 12 Bits Sample Memory Depth 4096 Measuring Points Horizontal Sensitivity 1 uS/Div ~ 10 S/Div Horizontal Position Adjustable with indicator Vertical Sensitivity 10 mV/Div ~ 10 V/Div (with 1x probe) 100mV/Div ~ 100 V/Div (with 10x probe) Vertical Position Adjustable with indicator Input Impedance 1 megohm (1MΩ) Max Input Voltage ±40Vpp (1x probe) ±400Vpp (10x probe) Coupling DC Trigger Modes Auto, Normal, Single, and Scan Rising/falling edge trigger Trig level adjustable with indicator Trig sensitivity adjustable with indicator Waveform Measurements Frequency, Duty Cycle, Voltage EMS, Pulse Count, Vpp, VMin, Vmax, Vavg Vertical cursors, adjustable Horizontal cursors, adjustable Hold/run feature Signal Generator Built-in 10Hzk ~ 1MHz (1-2-5 Step) Removable Memory 2GB removable microSD card Connection to PC USB Firmware Update Via USB, requires PC with Windows 7 or 10 Power Supply 3.7V Chargeable Lithium battery / USB Dimensions (w/o Probe) 91 mm x 62 mm x 13 mm (3.6″ x 2.5″ x 0.5″) uScope

AESwave

•Insulated alligator clip rated up to 5A •Insulated probe tip extender rated up to 3A •Modular test probe with banana connector in the handle, rated up to 10A •Modular hook-style clip test lead with banana connector, rated up to 5A •Modular pinch-style clip test lead with banana connector, rated up to 5A •Modular alligator clip with banana connector, rated up to 5A •Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers •Bare spade lug with banana connector, rated up to 10A

•CAT III 300V

•Compatible with other multimeters that accept safety shrouded, standard diameter banana connectors •UL approved•

TL81A

Fluke

Flashlight Grade Industrial Safety Rated Not Safety Rated Lighting Technology LED Rechargeable Yes Flashlight Battery Type Lithium-Ion Flashlight Battery Size 18650 Lumens 5/50/150/400/950 Lumens Range Greater Than 750 Maximum Lumens Output 950 Run Time on High Setting 3 hr.

Light Output Modes Turbo / High / Medium / Low / Eco Body Color Black Flashlight Body Material Aluminum Special Light Output Mode Red Light Number of Batteries 1 Batteries Included Yes Battery Burn Time 100/29/10/3/0.8 hr.

Lamp Life 50,000 hr.

Flashlight Beam Type Spot Weight with Batteries 8.00 oz.

Lens Material Tempered Glass Switch Type Push Button Replacement Lamp LED Mounting Type Head Strap Body Dia. 1.80" Beam Distance 8/27/46/76/116m Water Penetration Rating IPX8 Drop Rating 1.0m Standards ANSI Peak Beam Intensity 18/179/536/1430/3396cd Manufacturer’s Warranty Length Limited Lifetime Green Environmental Attribute Product is Rechargeable

HL60R

Fenix

Version

USB-SA44B — 4.4 GHz Spectrum Analyzer - Standard, Temperature Range: 0°C to +70°C - $919 Weight .64 lb (.29 kg) Dimensions 7.65" x 3.18" x 1.18" (19.4 x 8 x 3 cm)

SA44B

Spectrum Analyzers and SDR Receivers

37194 B&K Precision CT 2701

Kit Includes:

1 of 1001026 687-002 JENSEN LABEL 1 of 3055-1538/14-409 Feeler Gauge, 11 Blades 1 of Aven 13.509/8276 ALIGNMENT TOOL 13.509/8276 1 of Aven 13.530/8608 ALIGNMENT TRIMPOT TOOL 1 of Aven 44205 PK/5 #11 BLADE 44205 1 of Barco 04404 Ball Peen Hammer, 4 oz.

1 of Beau Tech SH20A "SH20A SoLDER AID REAMER/ FoRK 8"" BEAUTECH" 1 of Beau Tech SH20K Stainless Steel Brush/Scraper 1 of Eclipse ProsKit 900-123 Pocket Magnifier 1 of Edsyn 423-000 DESOLDER PUMP JENSEN 1 of Edsyn 424-340 Constant Temperature Soldering Iron 30W 1 of Eklind 69291 Hex Key Inch Set, 10 pc.

1 of Etcon CT102 Receptacle Tester 1 of Flambeau 5126CL Parts Box with 17 Compartments, 7 x 4 x 1-1/16” 1 of General 185B033 807U Slotted Ratchet Driver 1 of General 185B412 807XU Phillips Ratchet Driver 1 of General 300MEJENLOGO STAINLESS STEEL RULER 6" 300MEJENLOGO 1 of General 83 SCRIBE GENERAL (83) 1 of Grobet 37.793 #3 METAL FERRULED FILE H ANDLE 37.793 1 of Grobet JEN5 3PC FILE SET JEN5 GROBET 1 of Imperial 22R61 External Style Retaining Ring Pliers 1 of Jensen Tools 03-00-007150 Backpack case only , black 1 of Jensen Tools 1-001/5016 Chain Nose Pliers with Cutter 1 of Jensen Tools 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long 1 of Jensen Tools 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long 1 of Jensen Tools 1-006/ G270P-NP 7" Long Groove Joint Pliers with 1-1/8" Capacity 1 of Jensen Tools 1-007/4024 Miniature Chain Nose Pliers 4-7/8" Long 1 of Jensen Tools 100E61 Economy V Wire Stripper without Spring, 10-20 AWG 1 of Jensen Tools 1-010/ G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity 1 of Jensen Tools 13.166 Silver Penlight (AAA Batteries) 1 of Jensen Tools 1720 5" Straight Hemostats 1 of Jensen Tools 175* Smooth Blade Electrician's Scissors 5-1/4" Long 1 of Jensen Tools 18001 Light-Duty Precision Knife 1 of Jensen Tools 36B901 HANDLE 4 1/8" 1 of Jensen Tools 74701 Adjustable Wrench, 6", 1" Jaw Opening 1 of Jensen Tools 9J64101J Phillips Screwdriver, #1 Tip, 3" Blade, 6-5/8" Overall, Regular Style 1 of Jensen Tools 9J64102J Phillips Screwdriver, #2 Tip, 4" Blade, 8-1/2" Overall, Regular Style 1 of Jensen Tools 9J64105J #2 Phillips Screwdriver - Stubby Style 1 of Jensen Tools 9J64130J #0 Phillips Screwdriver - Pocket Clip Style 1 of Jensen Tools 9J66101J 1/8" Slotted Screwdriver - Pocket Clip Style 1 of Jensen Tools 9J66118J 1/8" Slotted Screwdriver - Regular Style 1 of Jensen Tools 9J66161J 1/4" Slotted Screwdriver - Stubby Style 1 of Jensen Tools 9J66164J 1/4" Slotted Screwdriver - Regular Style 1 of Jensen Tools 9J66166J 5/16" Slotted Scewdriver - Regular Style 1 of Jensen Tools 9J66183J 3/16" Slotted Screwdriver - Regular Style 1 of Jensen Tools M3300 Stamped Steel Crimper/Stripper 1 of Jensen Tools TWZ-935.00-J Reverse-Action Tweezer 1 of Jonard Tools AT-6241 Non Conductive Alignment Tool 7" 1 of Jonard Tools M-130/SX 8" Push-Pull Spring Tool 1 of Jonard Tools OB-1/3 BURNISHER FILES PKG/3 JONARD OB1 1 of Mayhew 21701 1/16" PIN PUNCH MAYHEW 21701 1 of Mayhew 21703 1/8" PIN PUNCH MAYHEW 21703 1 of Mayhew 24303-949 Center Punch 1 of Moody 58-0114 SCREWDRIVER SET MOODY TOOLS 58-0114 1 of OK Industries EX1 DIP Extractor for 8 to 24 pin narrow chips 1 of Proto j4974/21171 Small Metric Set 1 of Stanley 33-215 Powerlock Tape, 12'/3.5m 1 of Ullman A2 J, Pocket Inspection Mirror 7/8", 7-1/2" 1 of Ullman D-3 Slotted Screwstarter, 9" 1 of Ullman PD11-B Phillips Aluminum Screwstarter, 9" 1 of Vise Grip 5WR 5" Curved Jaw Locking Pliers with Cutter 1 of Xcelite 36-997 HEX BLADE 7/64" 1 of Xcelite 36B906 NUTDRIVER BLADE 3/16 1 of Xcelite 36B907 NUTDRIVER BLADE 7/32" 1 of Xcelite 36B908 NUTDRIVER BLADE 1/4" 1 of Xcelite 36B909 NUTDRIVER BLADE 9/32" 1 of Xcelite 36B910 NUTDRIVER BLADE 5/16" 1 of Xcelite 36B911 NUTDRIVER BLADE 11/32" 1 of Xcelite 36B912 NUTDRIVER BLADE 3/8" 1 of Xcelite 36B914 NUTDRIVER BLADE 7/16" 1 of Xcelite 36B916 NUTDRIVER BLADE 1/2" 1 of Xcelite 36B920 HEX BLADE .050" 1 of Xcelite 36B921 HEX BLADE 1/16" 1 of Xcelite 36B922 HEX BLADE 5/64" 1 of Xcelite 36B923 HEX BLADE 3/32" 1 of Xcelite 36B924 HEX BLADE 1/8" 1 of Xcelite 36B925 HEX BLADE 5/32" 1 of Xcelite 36B926 HEX BLADE 3/16" 1 of Xcelite 36B994 HEX BLADE 9/64" 1 of Xcelite 994 T Style Handle, 1 x 3-3/8 3055-1538/14-409 Feeler Gauge, 11 Blades Aven 13.509/8276 ALIGNMENT TOOL 13.509/8276 Aven 13.530/8608 ALIGNMENT TRIMPOT TOOL Aven 44205 PK/5 #11 BLADE 44205 Barco 04404 Ball Peen Hammer, 4 oz.

Beau Tech SH20A "SH20A SoLDER AID REAMER/ FoRK 8"" BEAUTECH" Beau Tech SH20K Stainless Steel Brush/Scraper Eclipse ProsKit 900-123 Pocket Magnifier Edsyn 423-000 DESOLDER PUMP JENSEN Edsyn 424-340 Constant Temperature Soldering Iron 30W Eklind 69291 Hex Key Inch Set, 10 pc.

Etcon CT102 Receptacle Tester Flambeau 5126CL Parts Box with 17 Compartments, 7 x 4 x 1-1/16” General 185B033 807U Slotted Ratchet Driver General 185B412 807XU Phillips Ratchet Driver General 300MEJENLOGO STAINLESS STEEL RULER 6" 300MEJENLOGO General 83 SCRIBE GENERAL (83) Grobet 37.793 #3 METAL FERRULED FILE H ANDLE 37.793 Grobet JEN5 3PC FILE SET JEN5 GROBET Imperial 22R61 External Style Retaining Ring Pliers Jensen Tools 03-00-007150 Backpack case only , black Jensen Tools 1-001/5016 Chain Nose Pliers with Cutter Jensen Tools 1-003/4012 Miniature Diagonal Cutters 4-3/8" Long Jensen Tools 1-005/5002 Diagonal Cutting Pliers 5-1/4" Long Jensen Tools 1-006/ G270P-NP 7" Long Groove Joint Pliers with 1-1/8" Capacity Jensen Tools 1-007/4024 Miniature Chain Nose Pliers 4-7/8" Long Jensen Tools 100E61 Economy V Wire Stripper without Spring, 10-20 AWG Jensen Tools 1-010/ G271P-NP 10" Long Groove Joint Pliers with 1-1/2" Capacity Jensen Tools 13.166 Silver Penlight (AAA Batteries) Jensen Tools 175* Smooth Blade Electrician's Scissors 5-1/4" Long Jensen Tools 18001 Light-Duty Precision Knife Jensen Tools 36B901 HANDLE 4 1/8" Jensen Tools 74701 Adjustable Wrench, 6", 1" Jaw Opening Jensen Tools 9J64101J Phillips Screwdriver, #1 Tip, 3" Blade, 6-5/8" Overall, Regular Style Jensen Tools 9J64102J Phillips Screwdriver, #2 Tip, 4" Blade, 8-1/2" Overall, Regular Style Jensen Tools 9J64105J #2 Phillips Screwdriver - Stubby Style Jensen Tools 9J64130J #0 Phillips Screwdriver - Pocket Clip Style Jensen Tools 9J66101J 1/8" Slotted Screwdriver - Pocket Clip Style Jensen Tools 9J66118J 1/8" Slotted Screwdriver - Regular Style Jensen Tools 9J66161J 1/4" Slotted Screwdriver - Stubby Style Jensen Tools 9J66164J 1/4" Slotted Screwdriver - Regular Style Jensen Tools 9J66166J 5/16" Slotted Scewdriver - Regular Style Jensen Tools 9J66183J 3/16" Slotted Screwdriver - Regular Style Jensen Tools M3300 Stamped Steel Crimper/Stripper Jensen Tools TWZ-935.00-J Reverse-Action Tweezer Jonard Tools AT-6241 Non Conductive Alignment Tool 7" Jonard Tools M-130/SX 8" Push-Pull Spring Tool Jonard Tools OB-1/3 BURNISHER FILES PKG/3 JONARD OB1 Mayhew 21701 1/16" PIN PUNCH MAYHEW 21701 Mayhew 21703 1/8" PIN PUNCH MAYHEW 21703 Mayhew 24303-949 Center Punch Moody 58-0114 SCREWDRIVER SET MOODY TOOLS 58-0114 OK Industries EX1 DIP Extractor for 8 to 24 pin narrow chips Proto j4974/21171 Small Metric Set Stanley 33-215 Powerlock Tape, 12'/3.5m Ullman A2 J, Pocket Inspection Mirror 7/8", 7-1/2" Ullman D-3 Slotted Screwstarter, 9" Ullman PD11-B Phillips Aluminum Screwstarter, 9" Vise Grip 5WR 5" Curved Jaw Locking Pliers with Cutter Xcelite 36-997 HEX BLADE 7/64" Xcelite 36B906 NUTDRIVER BLADE 3/16 Xcelite 36B907 NUTDRIVER BLADE 7/32" Xcelite 36B908 NUTDRIVER BLADE 1/4" Xcelite 36B909 NUTDRIVER BLADE 9/32" Xcelite 36B910 NUTDRIVER BLADE 5/16" Xcelite 36B911 NUTDRIVER BLADE 11/32" Xcelite 36B912 NUTDRIVER BLADE 3/8" Xcelite 36B914 NUTDRIVER BLADE 7/16" Xcelite 36B916 NUTDRIVER BLADE 1/2" Xcelite 36B920 HEX BLADE .050" Xcelite 36B921 HEX BLADE 1/16" Xcelite 36B922 HEX BLADE 5/64" Xcelite 36B923 HEX BLADE 3/32" Xcelite 36B924 HEX BLADE 1/8" Xcelite 36B925 HEX BLADE 5/32" Xcelite 36B926 HEX BLADE 3/16" Xcelite 36B994 HEX BLADE 9/64" Xcelite 994 T Style Handle, 1 x 3-3/8

JTK-87B

Jensen

•Fast go/no-go testing with VoltAlert™ non-contact voltage detection •AutoVolt automatic AC/DC voltage selection •Low input impedance helps prevent false readings due to ghost voltage •Work in poorly lit areas with the Large white LED backlit display •True RMS voltage and current for accurate measurements on non-linear loads •Measures 10 A directly (20 A overload for 30-seconds) without a current clamp •Resistance, continuity, frequency and capacitance •Record signal fluctuations using Min/Max/Average and elapsed time stamps •Easy to use with one hand •Hands free operation with optional magnetic hanger (ToolPak™) •CAT III 600 V safety rated Fluke 323 True-rms Clamp Meter •400 A AC current measurement •600 VAC and DC voltage measurement •True RMS AC voltage and current for accurate measurements on non-linear signals •Resistance measurement up to 40 kΩ with continuity detection 117-323 Kit

Fluke.com

Milestek

Small footprint with integrated KVM cables Self-powered; draws power from the server USB connections Multi-platform support USB and PS/2 to the server or KVM (PS/2 for keyboard only) Upgradable firmware LED indicators for USB link, host video link, and host keyboard/mouse link Manual video adjustments to control the picture position, sharpness, image, and noise for optimal performance settings

NOTECONS01

Startech

Insertion Loss (Single Mode) Typical - 0.40dB / Max - 0.75dB Back Reflection (Single Mode-UPC Polish) Typical - -50dB / Max - -40dB Operating Temperature -46° C to + 71° C Storage Temperature -55° C to + 85° C Mud 5 minute immersion, clean with water (per MIL-C-83526/12 /13 requirements) Water Pressure MIL-STD-810, Method 512.4, 1m, 48hr Ice Crush DOD-STD-1678, Method 4050 Humidity DOD-STD-1678, Method 4030, 10 Cycles Flammability MIL-STD-1344, Method 1012 Vibration (Operational) MIL-STD-1344, Method 2500.1 Shock EIA/TIA-455-14, Condition A Mating Durability 2,000 cycles per EIA/TIA-455-21 Cable Seal Flexing 100 cycles per MIL-STD-1344, Method 2017, Procedure 1 Twist 1,000 cycles per EIA/TIA-455-36 Cable Retention 400 pounds minimum per EIA/TIA-455-6, 1hr (applies to plug and strain relief receptacles) Impact EIA/TIA-455-2 Crush Resistance 450 pounds minimum per EIA/TIA-455-26 EMI Shielding Effectiveness (Receptacle Only) > 60dB, 15KHz to 10GHz Corrosion Resistance MIL-STD-1344, Method 1001, Cond A

12080501CT-10

Fiber System International

•FS7H1000M-L-03

•FS7H1000M-L-10 TFOCA Loopback, NSN: 6060-01-506-8084 •FS7H1000M-L-23.5 TFOCA Loopback 23.5 dB, NSN:6060-01-469-8429 •FS4H1000-L-M1 TFOCA-II® Loopback NSN: 5935-01-501-6715 •FS4H1000-L-S1 TFOCA-II® SM Loopback plug •FS4H1000-L-S1A TFOCA-II® SM Loopback 0dB S1-P2 / S2-P1 •11481044 TFOCA-II® Loopback plug, MM •EB4H1000L-S1 TACBeam® Loopback plug, 1310nm, 4-ch •EB4H1000L-S2 TACBeam® Loopback plug, 1550nm, 4-ch

FS4H1000

Fiber Systems International (FSI)

Milwaukee

Milwaukee

• Recognized as Bootable ODD (DVD, Blu-ray Rom), for booting by selecting a ISO file.

• AES 256-XTS/Write protect Blocker/Win To Go/Auto Sleep/4TB+/Safely Removal/Firmware Update

• You can use encrypted or normal disk

• VHD - virtual hard disk image to physical drive iodd 2451 iodd

Item Ratchet Crimper Insulated / Uninsulated Uninsulated Capacity RJ-11, RJ-45 Overall Length 13" For Use With Modular Plug Connectors Cuts Yes Strips Yes Max. Crimping Force Not Rated Adjustable Manual Handle Type Ergonomic Replacement Die Code None Features Built-in Wire Cutter and Stripper for Flat Cable, Rust-Resistant Includes RJ11, RJ45, Compact Design 30-696

IDEAL

Greenlee Communications

Item Hex Key Set Shape L Measurement Type SAE Arm Length 1.25" to 6.25" Blade Material Alloy Steel Finish Black Oxide Tether Capable Standard Tool (Accessory Needed for Tethering) Nonsparking No Insulated / Uninsulated Uninsulated Handle Type L-Shaped Arm Type Short Number of Pieces 18 Sizes Included 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" Handle Material Alloy Steel Meets/Exceeds ASME B18.3 Includes Metal Box Size Code S20 Tip Size 0.028",0.035",0.050",1/16",1/2",1/4",1/8",3/16",3/32",3/8",5/16",5/32",5/64",5/8",7/32",7/64",9/16",9/64" J4986

Proto

Respondent Due Date – Price and technical quotations are due within 13 calendar days of this notification, no later than close of business at 16:00 (EDST) on Wednesday, 11 September 2019. If you are unable to furnish a quote, respond with “no bid” and provide a detailed explanation as to why you are unable to.

Submit all responses and questions via email to Donna Brown at Donna.brown65.civ@mail.mil. Please cc Richard Newberg at Richard.m.newberg.civ@mail.mil and Eric Becoat at Eric.l.becoat.civ@mail.mil

Respondent Instructions – Reponses should clearly indicate the following:

· All quotes should indicate the original equipment manufacturer’s name and part number(s) specified under the above Product Description, with itemized pricing for each part number specified. Any deviations from the OEM and or Part Numbers specified shall be explained in the Offerors’ technical proposal.

The technical proposal should verify that the company is submitting its quotation on the equipment listed in the RFQ and or that the company is submitting an alternate product as an equal product. For the “or equal alternate products submissions, list the OEM, part number and provide the salient characteristics data from the OEM.

· Contractor CAGE Code, DUNS Number and business type / size.

· Published Commercial Price, if applicable.

· Any and all applicable discounts applied to the pricing.

· Quotes should separately identify any applicable costs associated with meeting the delivery instructions.

This document is neither a purchase order, nor a contract, nor a promise to issue an award.

The Government reserves the right to issue an award in part or in whole for the items described above. The Government is not obligated to make an award for all or any portion of the items described.

The contract will be awarded to the lowest responsive responsible bidder. The evaluation will be based upon the base year.

Delivery Instructions:

The Electronic and Communication Equipment, Sustainment Supplies and Equipment, Facilities Supplies and Equipment shall be delivered with inspection at destination within 30 days of award to:

(W58H9U)

The following will be incorporated into the award document for this requirement:

Contract Clauses/Provisions:

FAR/DFARS Description

252.232-7006 - WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS.

(TO BE COMPLETED AT AWARD)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area Work Flow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Pay Official DoDAAC

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Contracting Officer: richard.m.newberg.civ@mail.mil

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

CONTRACT PROVISIONS

52.212-2 -- EVALUATION -- COMMERCIAL ITEMS.

(a) The Government will award a contract resulting from this solicitation to the responsive responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price:

Technical and past performance, when combined, are less than Price.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 -- Offeror Representations and Certifications -- Commercial Items.

As prescribed in 12.301(b)(2), insert the following provision:

Offeror Representations and Certifications -- Commercial Items (Aug 2018) The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Website located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

(a) Definitions. As used in this provision-- “Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(6) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(7) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors)…