W56HZV23R0108-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2024JUN21

W912CH

ACC-DTA

6501 E. 11 MILE RD.

DETROIT ARSENAL, MI 48397-5000

JUSTINE BROUGHTON

EMAIL: JUSTINE.R.BROUGHTON.CIV@ARMY.MIL

W56HZV-23-R-0108

2024MAR26

X

X 2024JUL01 03:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 9

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: JUSTINE BROUGHTON

Buyer Office Symbol/Telephone Number: CCTA-APS-B/(586)282-7504

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

SOLICITATION: W56HZV-23-R-0108

AMENDMENT: 0002

1. The purpose of this amendment is to:

SF 30:

a) Extend the Offer Due Date from 26 April 2024 to 01 July 2024.

SECTION D:

b) Delete D.1.3.2 as referenced DFARS clause 252.211-7006 has been removed from regulations.

SECTION I:

c) Delete FAR 52.203-5 COVENANT AGAINST CONTINGENT FEES, as it is not applicable for commercial contracts.

d) Delete FAR 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT, as it is not applicable for commercial contracts.

e) Delete FAR 52.203-7 ANTI-KICKBACK PROCEDURES, as it is not applicable for commercial contracts.

f) Delete FAR 52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR IMPROPER ACTIVITY, as it is not applicable for commercial contracts.

g) Delete FAR 52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY, as it is not applicable for commercial contracts.

h) Delete FAR 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER, as it has been removed from regulation.

i) Delete FAR 52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT, as it is not applicable for commercial contracts.

j) Delete FAR 52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA, as it is not applicable for commercial contracts.

k) Delete FAR 52.215-14 INTEGRITY OF UNIT PRICES, as it is not applicable for commercial contracts.

l) Delete FAR 52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA --

MODIFICATIONS

m) Delete FAR 52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS (PRB) OTHER THAN PENSIONS, as it is not applicable for commercial contracts.

n) Delete FAR 52.222-20 CONTRACTS FOR MATERIALS, SUPPLIES, ARTICLES, AND EQUIPMENT, as it is not applicable for commercial contracts.

o) Delete FAR 52.223-6 DRUG-FREE WORKPLACE, as it is not applicable for commercial contracts.

p) Delete FAR 52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT, as it is not applicable for commercial contracts.

q) Delete FAR 52.227-9 REFUND OF ROYALTIES, as it is not applicable for commercial contracts.

r) Delete FAR 52.229-3 FEDERAL, STATE, AND LOCAL TAXES, as it is not applicable for commercial contracts.

s) Delete FAR 52.230-6 ADMINISTRATION OF COST ACCOUNTING STANDARDS, as it is not applicable for commercial contracts.

t) Delete FAR 52.232-1 PAYMENTS, as it is not applicable for commercial contracts.

2 9

W56HZV-23-R-0108

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

u) Delete FAR 52.232-8 DISCOUNTS FOR PROMPT PAYMENT, as it is not applicable for commercial contracts.

v) Delete FAR 52.232-11 EXTRAS, as it is not applicable for commercial contracts.

w) Delete FAR 52.232-17 INTEREST, as it is not applicable for commercial contracts.

x) Delete FAR 52.232-25 PROMPT PAYMENT, as it is not applicable for commercial contracts.

y) Delete FAR 52.242-5 PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS, as it is not applicable for commercial contracts.

z) Delete FAR 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM, as it is not applicable for commercial contracts.

aa) FAR 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS, as it is not applicable for commercial contracts.

ab) Delete FAR 52.242-13 BANKRUPTCY, as it is not applicable for commercial contracts.

ac) Delete FAR 52.244-5 COMPETITION IN SUBCONTRACTING, as it is not applicable for commercial contracts.

ad) Delete FAR 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES, as it is not applicable being Kidde is a small business.

ae) Delete FAR 52.246-26 REPORTING NONCONFORMING ITEMS, as it is not applicable for commercial contracts.

af) Delete FAR 52.247-63 PREFERENCE FOR U.S.-FLAG AIR CARRIERS, as it is not applicable for commercial contracts.

ag) Delete FAR 52.248-1 VALUE ENGINEERING, as it is not applicable for commercial contracts.

ah) Delete FAR 52.249-2 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE), as it is not applicable for commercial contracts.

ai) Delete FAR 52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) APR/1984

aj) Delete FAR 52.253-1 COMPUTER GENERATED FORMS, as it is not applicable for commercial contracts.

ak) Delete DFARS 252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-CONTRACT- RELATED FELONIES, as it is not applicable for commercial contracts.

al) Delete DFARS 252.204-7006 BILLING INSTRUCTIONS COST VOUCHERS, as it is not applicable for commercial contracts.

am) Delete DFARS 252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A TERRORIST COUNTRY, as it is not applicable for commercial contracts.

an) Delete DFARS 252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS, as it is not applicable for commercial contracts.

ao) Delete DFARS 252.216-7004 AWARD FEE REDUCTION OR DENIAL FOR JEOPARDIZING THE HEALTH OR SAFETY OF GOVERNMENT PERSONNEL, as it is not applicable for commercial contracts.

ap) Delete DFARS 252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS, as it is only applicable to Canadian contracts.

aq) Delete DFARS 252.223-7004 DRUG-FREE WORK FORCE, as it is not applicable for commercial contracts.

ar) Delete DFARS 252.225-7016 RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS, as it is not applicable for this contract.

as) Delete DFARS 252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND TUNGSTEN, as it is not applicable for this contract.

at) Delete DFARS 252.227-7013 RIGHTS IN TECHNICAL DATA--OTHER THAN COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES, as it is not applicable for commercial contracts.

au) Delete DFARS 252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL COMPUTER SOFTWARE DOCUMENTATION, as it is not applicable for commercial contracts.

av) Delete FAR 52.204-19, INCORPORATION BY REFERENCE OF REPRESENTATION AND CERTIFICATIONS, as it is not applicable for commercial contracts.

3 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

aw) Delete FAR 52.215-19 NOTIFICATION OF OWNERSHIP CHANGES, as it is not applicable for commercial contracts.

ax) Delete FAR 52.230-2 COST ACCOUNTING STANDARDS, as it is not applicable for commercial contracts.

ay) Delete DFARS 252.225-7972 PROHIBITION ON THE PROCUREMENT OF FOREIGN MADE UNMANNED AIRCRAFT SYSTEMS, as it is not applicable for this contract.

2. All other terms and conditions, except for those addressed above remain unchanged and are in full force and affect.

*** END OF NARRATIVE A0003 ***

4 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION D - PACKAGING AND MARKING

D.1 PACKAGING REQUIREMENTS (SPECIAL PACKAGING INSTRUCTIONS)

D.1.1 Military preservation, packing, and marking for this contract/order shall be accomplished in accordance with the specific requirements identified below, all the applicable requirements of, MIL-STD-2073-1, and the Special Packaging Instruction, see below.

D.1.1.1 LEVEL OF PRESERVATION: Military

D.1.1.2 LEVEL OF PACKING: B

D.1.1.3 QUANTITY PER UNIT PACKAGE: 001

D.1.1.4 SPECIAL PACKAGING INSTRUCTION NUMBER. AK16819997

D.1.1.4.1 REVISION A

D.1.1.4.2 DATE OF REVISION 13 MAY 2019

D.1.1.4.3 THE REQUIRED SPECIAL PACKAGING INSTRUCTION (SPI) IS AVAILABLE ON THE WEB AT THE FOLLOWING URL: N/A

(Note: You must have the Adobe Acrobat reader installed on your PC to view the SPI. See Adobes website (http://get.adobe.com/reader/ ) for information on obtaining the latest version of the reader. If you're experiencing problems opening the Special Packaging

Instructions in Adobe .PDF images using Internet Explorer, try the following: Go to "Tools," then "Internet Options." Click on the

"Advanced" tab. Scroll down to the "Security" section. Uncheck "Do not save encrypted pages to disk." Click "Apply." Click "OK.")

D.1.2 Unitization: Shipments of identical items going to the same destination shall be palletized if they have a total cubic displacement of 50 cubic feet or more unless skids or other forklift handling features are included on the containers. Pallet loads must be stable, and to the greatest extent possible, provide a level top for ease of stacking. A palletized load shall be of a size to allow for placement of two loads high and wide in a conveyance. The weight capacity of the pallet must be adequate for the load. The preferred pallet is a 40 x 48 inch, 4-way entry pallet although variations may be permitted as dictated by the characteristics of the items being unitized. The load shall be contained in a manner that will permit safe handling during shipment and storage.

D.1.3 Marking:

D.1.3.1 In addition to any special markings called out on the SPI, all unit packages, intermediate packs, exterior shipping containers, and, as applicable, unitized loads shall be marked in accordance with MIL-STD-129). The contractor is responsible for application of special markings as discussed in the Military Standard regardless of whether specified in the contract/order or not. Special markings include, but are not limited to, Shelf-life markings, structural markings, and transportation special handling markings. The marking of pilferable and sensitive materiel will not identify the nature of the materiel.

D.1.4 Heat Treatment and Marking of Wood Packaging Materials (WPM):

D.1.4.1 In accordance with DOD 4140.65-M and the requirements of the International Standards for Phytosanitary Measures 15 (ISPM), Regulation of Wood Packaging Material in International Trade, current edition, (hereinafter ISPM 15), the following commercial heat treatment and marking process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging

Material (WPM). Foreign manufacturers shall comply with ISPM 15, and have the WPM heat treatment and marking verified in accordance with their National Plant Protection Organizations compliance program.

D.1.4.2 Boxes/pallets and any wood used as inner packaging made of non-manufactured wood shall be heat-treated. All WPM using a conventional steam or dry kiln heat chamber (treatment code for the mark: HT) shall be heat treated to a minimum core temperature of 56 degrees Celsius for a minimum of 30 minutes, and certified by an agency accredited by the ALSC in accordance with Wood Packaging

Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org ). WPM heat treated wood using dielectric heating (treatment code for the mark: DH) shall follow the requirements in ISPM 15, and shall be certified by an agency accredited by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL:

http://www.alsc.org ). The box/pallet manufacturer and the manufacturer of wood used as inner packaging shall ensure the materials used in manufacture can be traced to the original source of heat treatment, and that the original source of the heat treatment obtained the necessary certifications.

D.1.4.3 Marking: Each box/pallet shall be marked to show the conformance to the International Plant Protection Convention Standard.

The ALS approved quality mark shall be placed on both ends of the outer packaging, between the end cleats or end battens. Pallet markings shall be applied to the side of the stringer or end of the block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked

5 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

with an ALSC approved DUNNAGE stamp. Foreign manufacturers shall comply with ISPM -15 and shall have the marking of WPM verified in accordance with their National Plant Protection Organizations compliance program.

D.1.5 Hazardous Materials (As applicable):

D.1.5.1 Hazardous Materials is defined as a substance, or waste which has been determined by the Secretary of Transportation to be capable of posing an unreasonable risk to health, safety, and property when transported in commerce and which has been so designated.

(This includes all items listed as hazardous in Titles 29, 40 and 49 CFR and other applicable modal regulations effective at the time of shipment.)

D.1.5.2 Unless otherwise specified, packaging and marking for hazardous material shall comply with the requirements herein for the mode of transport and the applicable performance packaging contained in the following documents:

- International Air Transport Association (IATA) Dangerous Goods Regulations

- International Maritime Dangerous Goods Code (IMDG)

- Code of Federal Regulations (CFR) Title 29, Title 40 and Title 49

- Joint Service Regulation AFJMAN24-204(I)/TM38-250/NAVSUPPUB 505/MCO P4030.19(I)/DLAM 4145.3(I) (for military air shipments).

D.1.5.3 If the shipment originates from outside the continental United States, the shipment shall be prepared in accordance with the

United Nations Recommendations on the Transport of Dangerous Goods in a manner acceptable to the Competent Authority of the nation of origin and in accordance with regulations of all applicable carriers. A Product Material Safety Data Sheets (MSDS) is required to be included with every unit pack and intermediate container and shall be included with the packing list inside the sealed pouch attached to the outside of the package.

D.1.6 This SPI has been validated and the method of preservation/packing has proven successful in meeting the needs of the military distribution system, including indeterminate storage and shipment throughout the world. Special instructions and/or tailoring of the

SPI is detailed in the Supplemental Instructions below. A prototype package is required to validate the sizes and fit requirements of the SPI. Minor dimensional and size changes are acceptable provided contractor provides the PCO and ACO with notification 60 days prior to delivery. Any design changes or changes in the method of preservation that provide a cost savings without degrading the method of preservation or packing or affecting the serviceability of the item will be considered and responded to within 10 days of submission to

PCO and ACO. Government reserves the right to require testing to validate alternate industrial preservation methods, materials, alternate blocking, bracing, cushioning, and packing.

D.1.7 SUPPLEMENTAL INSTRUCTIONS: SEE SPECIAL PACKAGING INSTRUCTIONS ATTACHMENT 0002

*** END OF NARRATIVE D0001 ***

6 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION I - CONTRACT CLAUSES

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

I-1 DELETED 52.203-5 COVENANT AGAINST CONTINGENT FEES MAY/2014

I-2 DELETED 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT JUN/2020

I-3 DELETED 52.203-7 ANTI-KICKBACK PROCEDURES JUN/2020

I-4 DELETED 52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR MAY/2014

IMPROPER ACTIVITY

I-5 DELETED 52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY MAY/2014

I-6 DELETED 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER FIBER CONTENT PAPER MAY/2011

I-7 DELETED 52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT OCT/1997

I-8 DELETED 52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA AUG/2011

I-9 DELETED 52.215-14 INTEGRITY OF UNIT PRICES NOV/2021

I-10 DELETED 52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS (PRB) JUL/2005

OTHER THAN PENSIONS

I-11 DELETED 52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN NOV/2021

CERTIFIED COST OR PRICING DATA --MODIFICATIONS

I-12 DELETED 52.222-20 CONTRACTS FOR MATERIALS, SUPPLIES, ARTICLES, AND EQUIPMENT JUN/2020

I-13 DELETED 52.226-7 DRUG-FREE WORKPLACE (MAY 2024) MAY/2024

I-14 DELETED 52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT JUN/2020

I-15 DELETED 52.227-9 REFUND OF ROYALTIES APR/1984

I-16 DELETED 52.229-3 FEDERAL, STATE, AND LOCAL TAXES FEB/2013

I-17 DELETED 52.230-6 ADMINISTRATION OF COST ACCOUNTING STANDARDS JUN/2010

I-18 DELETED 52.232-1 PAYMENTS APR/1984

I-19 DELETED 52.232-8 DISCOUNTS FOR PROMPT PAYMENT FEB/2002

I-20 DELETED 52.232-11 EXTRAS APR/1984

I-21 DELETED 52.232-17 INTEREST MAY/2014

I-22 DELETED 52.232-25 PROMPT PAYMENT JAN/2017

I-23 DELETED 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS JUN/2013

I-24 DELETED 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM OCT/2004

I-25 DELETED 52.242-5 PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS JAN/2017

I-26 DELETED 52.242-13 BANKRUPTCY JUL/1995

I-27 DELETED 52.244-5 COMPETITION IN SUBCONTRACTING DEC/1996

I-28 DELETED 52.244-6 SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC DEC/2023

2023)

I-29 DELETED 52.246-26 REPORTING NONCONFORMING ITEMS NOV/2021

I-30 DELETED 52.247-63 PREFERENCE FOR U.S.-FLAG AIR CARRIERS JUN/2003

I-31 DELETED 52.248-1 VALUE ENGINEERING JUN/2020

I-32 DELETED 52.249-2 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE) APR/2012

I-33 DELETED 52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) APR/1984

I-34 DELETED 52.253-1 COMPUTER GENERATED FORMS JAN/1991

I-35 DELETED 252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-CONTRACT- JAN/2023

RELATED FELONIES (JAN 2023)

I-36 DELETED 252.204-7006 BILLING INSTRUCTIONS--COST VOUCHERS (MAY 2023) MAY/2023

I-37 DELETED 252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE MAY/2019

GOVERNMENT OF A TERRORIST COUNTRY

I-38 DELETED 252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS DEC/2012

I-39 DELETED 252.216-7004 AWARD FEE REDUCTION OR DENIAL FOR JEOPARDIZING THE HEALTH OR SAFETY SEP/2011

OF GOVERNMENT PERSONNEL

I-40 DELETED 252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (JAN JAN/2023

2023)

I-41 DELETED 252.223-7004 DRUG-FREE WORK FORCE SEP/1988

I-42 DELETED 252.225-7016 RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (JAN 2023) JAN/2023

I-43 DELETED 252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND JAN/2023

TUNGSTEN (JAN 2023)

I-44 DELETED 252.227-7013 RIGHTS IN TECHNICAL DATA--OTHER THAN COMMERCIAL PRODUCTS AND MAR/2023

COMMERCIAL SERVICES (MAR 2023

I-45 DELETED 252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL COMPUTER MAR/2023

SOFTWARE DOCUMENTATION(MAR 2023)

I-46 DELETED 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS DEC/2014

I-47 DELETED 52.215-19 NOTIFICATION OF OWNERSHIP CHANGES OCT/1997

I-48 DELETED 52.230-2 COST ACCOUNTING STANDARDS JUN/2020

7 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

I-49 DELETED 252.225-7972 PROHIBITION ON THE PROCUREMENT OF FOREIGN-MADE UNMANNED AIRCRAFT MAY/2020

SYSTEMS (DEVIATION 2020-O0015)

8 9

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION K - REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS OF OFFERORS

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

K-1 DELETED 252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS NOV/2023

9 9