W56HZV23Q0025-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0001 2023OCT19

W56HZV

ACC-DTA

6501 E. 11 MILE RD.

DETROIT ARSENAL, MI 48397-5000

CHRISTINA HERBIG

EMAIL: CHRISTINA.A.HERBIG.CIV@ARMY.MIL

W56HZV-23-Q-0025

2023JUL14

X

X 2023OCT30 03:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 39

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: CHRISTINA HERBIG

Buyer Office Symbol/Telephone Number: CCTA-CPB-C/(586)282-1234

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

Weapon System: Light Armored Vehicle

*** End of Narrative A0000 ***

A.1 BACKGROUND/DESCRIPTION OF THE ACTION

A.1.1 Under the authority of FAR 13.103-1(b)(1), "Soliciting from a Single Source," the Government intends to award a Sole Source, Firm-

Fixed Price (FFP) contract to Caterpillar Inc. for the Remover, Bearing and Bushing, NSN: 5120-01-485-4648, Part Number 4C-4869: .

A.2 SOLICITATION STRUCTURE

The Government will utilize North American Industry Classification System (NAICS) code 332216 (Bearing pullers, handtools, manufacturing).

A.3 Delteted

A.4 Electronic Contracting

A.4.1 All Army Contracting Command Detroit Arsenal solicitations will be publicized on the System for Award Management website

(https://www.sam.gov ). Any additional attachments, including Technical Data Packages (TDPs) when available electronically, will be separate attachments or links embedded in the solicitation.

A.4.2 Unless directed to do otherwise in Section L of this solicitation, offerors shall follow the instructions in paragraph (c) below.

A.4.3 With the recent transition from www.FBO.gov to www.beta.sam.gov and then to www.sam.gov , the www.sam.gov site has been experiencing a number of issues. Interested Offerors shall submit a proposal via email to the Contract Specialist

(christina.a.herbig.civ@army.mil) and cc the corresponding Contracting Officer (erika.j.dennison2.civ@army.mil) with the subject header:

Proposal Submission - W56HZV-23-Q-0025 (company name). Once a proposal is received, the Contract Specialist/Contracting Officer will reply with the respective Offeror stating receipt of proposal submission.

A.4.3.1 Maximum size of each e-mail shall be 10 megabytes. You may use multiple e-mail messages for each bid/submission, however, you must annotate the subject lines as described above for each message, and number them in this manner: Message 1 of 3, 2 of 3, 3 of 3.

Bids can be submitted can be submitted using any of the following electronic formats:

A.4.3.2 Microsoft Office Products; Word, Excel, or PowerPoint. Spreadsheets must be sent in a format that includes all formulate macro and format information. Print image is not acceptable.

A.4.3.3 Files in Adobe PDF (Portable Document Format). Scanners should be set to 300 dots per inch.

A.4.3.4 Files in HTML (Hypertext Markup Language). HTML documents must not contain active links to live Internet sites or pages. All linked information must be contained within your electronic bid/offer and be accessible offline.

A.4.3.5 Other electronic formats are not acceptable. Ensure that filenames of attachments DO NOT contain spaces to limit virus scanners rejecting the email as unscannable.

A.4.4 Please pay close attention to the Issued By block location on the cover page of the solicitation for closing date and time. The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with FAR 15.208(a), offerors are responsible for submitting proposals, and any revisions, and modifications, so as to be received by the Government office designated in the solicitation by the time specified.

A.4.5 It is the responsibility of the Offeror to ensure the proposal/quote is received by the date and time specified on the cover page of this solicitation. In accordance with FAR 15.208, if the proposal/quote was not received at the initial point of entry to the

Government infrastructure (in this case, received through SAM) by the exact date and time specified on the cover page of this solicitation, it will be determined late. Proposal/quote is defined to mean ALL volumes or parts required in the solicitation are included in the electronic submission.

Note: There is no "expected" or "target" length of time for proposal submission; size and content may be factors, therefore offerors are

2 39

W56HZV-23-Q-0025

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

strongly cautioned when submitting proposals to allow adequate time for submission.

A.4.6 Solicitations may remain posted on www.Ssam.gov after the solicitation closing date. If the response deadline has passed for the solicitation, vendors will no longer be able to submit electronic responses.

A.4.7 Any award issued as a result of this solicitation will be distributed electronically. In the event of a FOIA request for a copy of any award issued as a result of this solicitation, or any subsequent modifications to the contract, the contract and modifications will be released, including the awarded unit price. This is the notice required by Executive Order 12600 (June 23, 1987) of the

Governments intention to release unit prices in response to any request under the Freedom of Information Act (FOIA), 5 USC 552. Unit price is defined as the contract price per unit or item purchased as it appears in Section B of the contract and is NOT referring to nor does it include Cost or Pricing data/information. If an Offeror objects to such release in the base contract or contract modifications, the Offeror must notify the contracting officer in writing prior to the closing date identified in this solicitation and include the rationale for the objection consistent with the provisions of FOIA. A release determination will be made based on rationale given.

A.4.8 Questions pertaining to this solicitation should be directed to the Contract Specialist identified on the cover page of this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the

Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center.

A.5 ACKNOWLEDGEMENT OF AMENDMENTS

Acknowledge all the amendments received from the Government by identifying the amendment number and its issue date below:

Amendment Number: Date:

A.6 ALL OR NONE-COMMERCIAL ITEM ACQUISITION

A.6.1 This provision serves as an addendum that modifies paragraph (h) of FAR 52.212-1, entitled INSTRUCTIONS TO OFFERORS--COMMERCIAL

ITEMS. Paragraph (h) is modified to say that the proposal or quote must offer to provide the total quantity of the items in this solicitation.

A.6.2 Only one award will be made as a result of this solicitation. Offers submitted for less than the total quantities of all the items in this solicitation will NOT be considered for award.

A.7 ARMY CONTRACTING COMMAND DETROIT ARSENAL (DTA) OMBUDSPERSON

Information regarding the Ombudsperson for this contract is located at the following website: https://www.tacom.army.mil/ombudsperson

. (Best viewed using Google Chrome or Microsoft Edge)

*** END OF NARRATIVE A0001 ***

SOLICITATION: W56HZV-23-Q-0025

AMENDMENT: 0001

1. The purpose of Amendment 0001 is to:

SECTION A:

a) Delete paragraph A.3, System for Award Management (SAM), Size Standards, and NAICS Codes, from narrative A0001.

b) Delete paragraph A.6, All or None, from narrative A0001, as it is not approved from the use in Commercial contracts.

c) Add new paragraph A.6, All of None Commercial Item Acquisition.

SECTION C:

d) Delete paragraph C.1, Acquisition of Manufacturers Part Number, as it is not approved for the use in Commercial contracts.

3 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E:

e) Delete paragraph E.1, Technical Data for Inspection, as it is not approved from the use in Commercial contracts.

f) Add new paragraph E.2, Drawings for Inspection Commercial Item.

g) Delete FAR clause 52.246-2, Inspection of Supplies Fixed Price, as it is not approved from the use in Commercial contracts.

h) Delete FAR clause 52.246-15, Certification of Conformance, as it is not approved from the use in Commercial contracts.

i) Delete FAR clause 52.246-16, Responsibility for Supplies, as it is not approved from the use in Commercial contracts.

SECTION F:

j) Delete paragraph F.1, Depot Address for the Applicable Mode of Shipments: In-the-Clear Addresses, as it is not approved from the use in Commercial contracts.

k) Delete FAR clause 52.242-15, Stop-Work Order, as it is not approved from the use in Commercial contracts.

l) Delete FAR clause 52.242-17, Government Delay of Work, as it is not approved from the use in Commercial contracts.

m) Delete FAR clause 52.246-48, F.O.B. Destination Evidence of Shipment, as it is not approved from the use in Commercial contracts.

n) Delete FAR clause 52.211-8, Time of Delivery, as it is not approved from the use in Commercial contracts.

o) Add DFARs clause 252.211-7003, Item Unique Identification and Valuation.

SECTION I:

p) Add FAR clause 52.204-10, Reporting EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS.

q) Delete FAR clause 52.211-5, MATERIAL REQUIREMENTS, as it is not approved from the use in Commercial contracts.

r) Delete FAR clause 52.211-15, DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS, as it is not approved from the use in Commercial contracts.

s) Add FAR clause 52.212-4, CONTRACT TERMS AND CONDITIONS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES.

t) Delete FAR clause 52.215-8, ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT, as it is not approved from the use in Commercial contracts.

u) Delete FAR clause 52.222-1, NOTICE TO THE GOVERNMENT OF LABOR DISPUTES, as it is not approved from the use in Commercial contracts.

v) Delete FAR clause 52.227-1, AUTHORIZATION AND CONSENT, as it is not approved from the use in Commercial contracts.

w) Delete FAR clause 52.232-23, ASSIGNMENT OF CLAIMS (MAY 2014) -- ALTERNATE I (APR 1984), as it is not approved from the use in

Commercial contracts.

x) Add FAR clause 52.232-33, PAYMENT BY ELECTRONIC FUNDS TRANSFER--SYSTEM FOR AWARD MANAGEMENT, as it is not approved from the use in

Commercial contracts.

y) Add FAR clause 52.233-1, DISPUTES, as it is not approved from the use in Commercial contracts.

z) Delete FAR clause 52.243-1, ChangesFixed Price, as it is not approved from the use in Commercial contracts.

aa) Delete FAR clause 52.246-23, LIMITATION OF LIABILITY, as it is not approved from the use in Commercial contracts.

ab) Delete FAR clause 52.247-68, REPORT OF SHIPMENT (REPSHIP), as it is not approved from the use in Commercial contracts.

ac) Delete DFARs clause 252.204-7000, DISCLOSURE OF INFORMATION, as it is not approved from the use in Commercial contracts.

ad) Delete DFARs clause 252.204-7003, CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT, as it is not approved from the use in Commercial contracts.

ae) Add DFARs clause 252.204-7004, ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS.

af) Add DFARs clause 252.223-7008, PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023).

4 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

ag) Delete DFARs clause 252.225-7012, PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES, as it is not approved from the use in Commercial contracts.

ah) Add DFARs clause 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (JAN 2023).

ai) Delete DFARs clause 252.225-7033, WAIVER OF UNITED KINGDOM LEVIES, as it is not approved from the use in Commercial contracts.

aj) Delete DFARs clause 252.225-7048, EXPORT-CONTROLLED ITEMS, as it is not approved from the use in Commercial contracts.

ak) Add DFARs clause 252.225-7052, RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, TUNGSTEN (JAN 2023).

al) Delete DFARs clause 252.225-7016, RIGHTS IN BID OR PROPOSAL INFORMATION (JAN 2023), as it is not approved from the use in Commercial contracts.

am) Delete DFARs clause 252.231-7000, SUPPLEMENTAL COST PRINCIPLES, as it is not approved from the use in Commercial contracts.

an) Delete DFARs clause 252.243-7001, PRICING OF CONTRACT MODIFICATIONS, as it is not approved from the use in Commercial contracts.

ao) Add DFARs clause 252.244-7000, SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (JAN 2023).

ap) Add DFARs clause 252.246-7003, NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023).

aq) Add FAR clause 52.212-5, CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (SEP 2023).

ar) Add FAR clause 52.204-21, BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS.

as) Add FAR clause 52.204-25, PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT.

at) Delete FAR clause 52.213-4, TERMS AND CONDITIONS--SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERICIAL PRODUCTS AND COMMERCIAL SERVICES)

(JUN 2023), as it is not approved from the use in Commercial contracts.

au) Delete FAR clause 52.223-3, HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA, as it is not approved from the use in

Commercial contracts.

av) Delete FAR clause 52.252-6, AUTHORIZED DEVIATIONS IN CLAUSES, as it is not approved from the use in Commercial contracts.

aw) Delete DFARs clause 252.223-7001, HAZARD WARNING LABELS, as it is not approved from the use in Commercial contracts.

ax) Add DFARs clause 252.239-7018, SUPPLY CHAIN RISK (DEVIATION 2018-O0020).

SECTION K:

ay) Add FAR clause 52.225-25, PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN SANCTIONED ACTIVITIES RELATING TO IRAN--

REPRESENTATION AND CERTIFICATION.

az) Delete FAR clause 52.204-8, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2023), as it is not approved from the use in Commercial contracts.

ba) Delete FAR clause 52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT, as it is not approved from the use in Commercial contracts.

bb) Delete FAR clause 52.207-4, ECONOMIC PURCHASE QUANTITY-SUPPLIES, as it is not approved from the use in Commercial contracts.

bc) Add FAR clause 52.212-3, OFFERORS REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (SEP 2023) --

ALTERNATE I (OCT 2014).

bd) Add DFARs clause 252.225-7973, PROHIBITION ON THE PROCUREMENT OF FOREIGN-MADE UNMANNED AIRCRAFT SYSTEMS--REPRESENTATION (DEVIATION

2020-O0015).

SECTION L:

be) Delete FAR clause 52.207-1, NOTICE OF STANDARD COMPETITION, as it is not approved from the use in Commercial contracts.

bf) Add FAR clause 52.212-1, INSTRUCTIONS TO OFFERORS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (SEP 2023).

bg) Delete FAR clause 52.214-34, SUBMISSION OF OFFERS IN THE ENGLISH LANGUAGE, as it is not approved from the use in Commercial

5 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

contracts.

bh) Delete FAR clause 52.214-35, SUBMISSIONS OF OFFERS IN U.S. CURRENCY, as it is not approved from the use in Commercial contracts.

bi) Delete FAR clause 52.215-16, FACILITIES CAPITAL COST OF MONEY, as it is not approved from the use in Commercial contracts.

bj) Delete DFARs clause 252.204-7019, NOTICE OF NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS, as it is not approved from the use in

Commercial contracts.

bk) Delete FAR clause 52.211-14, NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE, as it is not approved from the use in Commercial contracts.

bl) Add DFARs clause 252.215-7012, REQUIREMENTS FOR SUBMISSION OF PROPOSALS VIA ELECTRONIC MEDIA.

bm) Delete FAR clause 52.211-1, AVAILABILITY OF SPECIFICATIONS LISTED IN THE GSA INDEX OF FEDERAL SPECIFICATIONS, STANDARDS AND

COMMERCIAL ITEM DESCRIPTIONS, FPMR PART 101-29, as it is not approved from the use in Commercial contracts.

bo) Delete FAR clause 52.211-2, AVAILABILITY OF SPECIFICATIONS, STANDARDS, AND DATA ITEM DESCRIPTIONS LISTED IN THE ACQUISITION

STREAMLINING AND STANDARDIZATION INFORMATION SYSTEM (ASSIST), as it is not approved from the use in Commercial contracts.

bp) Delete FAR clause 52.252-1, SOLICITATION PROVISIONS INCORPORATED BY REFERENCE, as it is not required.

bq) Delete FAR clause 52.252-5, AUTHORIZED DEVIATIONS IN PROVISIONS, as it is not required.

br) Delete L.1, General Proposal Information, as it is no approved for use in Commercial contracts.

bs) Delete L.2, Proposal Content, Format and Instructions, as it is no approved for use in Commercial contracts.

bt) Delete L.3, OFFERS DELIVERED BY THIRD PARTY EXPRESS SERVICES (NON-US POSTAL SERVICE MAIL), as it is no approved for use in

Commercial contracts.

bu) Delete L.4, HQ-AMC LEVEL PROTEST PROCEDURES, as it is no approved for use in Commercial contracts.

bv) Delete L.5, NOTICE REGARDING REQUIRED SOURCE-CONTROLLED COMPONENT OR MANUFACTURER'S PART NUMBER, as it is no approved for use in

Commercial contracts.

bw) Delete L.6, PART NUMBERS NOT CURRENTLY APPROVED, as it is no approved for use in Commercial contracts.

bx) Delete L.7, PACKING/PACKAGING LEVEL FOR OPTION QUANTITIES, as it is no approved for use in Commercial contracts.

SECTION M:

by) Delete M.1, EVALUATION OF INCOMPLETE OPTION PRICING, as it is no approved for use in Commercial contracts.

bz) Delete M.2, CONTRACTOR RESPONSIBILITY AND ELIGIBILITY FOR AWARD, as it is no approved for use in Commercial contracts.

All other terms and conditions of the Solicitation remain unchanged and in full force and effect.

*** END OF NARRATIVE A0002 ***

6 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

*** DELETED NARRATIVE C0001 ***

INSPECTION AND ACCEPTANCE

E.1 INSPECTION AND ACCEPTANCE POINTS: ORIGIN

The Government's inspection and acceptance of the supplies offered under this contract/purchase order shall take place at ORIGIN.

Offeror must specify below the exact name, address, and CAGE of the facility where supplies to be furnished under this contract/purchase order will be available for inspection/acceptance.

INSPECTION POINT: __________________________________________

(Name) (CAGE)

(Address) (City) (State) (Zip)

ACCEPTANCE POINT: __________________________________________

(Name) (CAGE)

(Address) (City) (State) (Zip)

E.2 Drawings for Inspection Commercial Item

E.2.1 When requested, the Contractor shall make available to the Government Inspector, the drawings and specifications to which the product was manufactured. Upon completion of product inspection and acceptance by the Government Inspector, all drawings and specifications will be returned to the Contractor.

E.2.2 If the contractor is not the actual manufacturer of the item being procured (i.e. dealer, distributor, etc.) the contractor shall ensure that subcontractor drawings are available for review to support the Governments inspection requirements.

E.2.3 The Government may rely on the contractors Certificate of Conformance, as outlined in FAR 52.246-15, that the commercial item tendered for acceptance conforms to the contract requirements. However, conditions may warrant that the contractor be required to make available to the Government drawings, specifications or other technical data such that the Government can determine if the commercial item meets the contract requirements. These conditions may include but not be limited to the following:

E.2.3.1 Complex items or items which have quality characteristics, for which contractual conformance must be established through precise measurements and functional operation either as an individual item or in conjunction with other items.

E.2.3.2 Items used in critical applications or items denoted as critical on technical data.

E.2.3.3 Items with known quality conformance issues.

E.2.3.4 Items with an unstable design history.

E.2.3.5 Contractor changes in technical requirements, technical data, and/or production processes which impacts the fit, form or function of the item.

*** END OF NARRATIVE E0001 ***

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

1 DELETED 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

2 DELETED 52.246-15 CERTIFICATE OF CONFORMANCE APR/1984

3 DELETED 52.246-16 RESPONSIBILITY FOR SUPPLIES APR/1984

7 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DELIVERIES OR PERFORMANCE

*** DELETED NARRATIVE F0001 ***

4 DELETED 52.242-15 STOP-WORK ORDER AUG/1989

5 DELETED 52.242-17 GOVERNMENT DELAY OF WORK APR/1984

6 DELETED 52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT FEB/1999

7 DELETED 52.211-8 TIME OF DELIVERY JUN/1997

8 CHANGED 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023) JAN/2023

(a) Definitions. As used in this clause--

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards

Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Governments unit acquisition cost" means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the

Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the

Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459 .

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as

8 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

__N/A_____________ ___________N/A________________________

__N/A______________ ___________N/A________________________

__N/A______________ ___________N/A________________________

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

__N/A______________ ____________N/A_______________________

__N/A______________ ____________N/A_______________________

9 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

__N/A______________ ____________N/A_______________________

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in

Attachment Number -5-.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in

Attachment Number -6-.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC

International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI

MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International

Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2

Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air

Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer

Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of

U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of

MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

10 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and

Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material

Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Governments unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material

Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

11 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at

252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/ ; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

12 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

9 ADDED 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS JUN/2020

10 DELETED 52.211-5 MATERIAL REQUIREMENTS AUG/2000

11 DELETED 52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS APR/2008

12 ADDED 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL PRODUCTS AND COMMERCIAL NOV/2021

SERVICES

13 DELETED 52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT OCT/1997

14 DELETED 52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES FEB/1997

15 DELETED 52.227-1 AUTHORIZATION AND CONSENT JUN/2020

16 DELETED 52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014) -- ALTERNATE I (APR 1984) APR/1984

17 ADDED 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER--SYSTEM FOR AWARD MANAGEMENT OCT/2018

18 ADDED 52.233-1 DISPUTES MAY/2014

19 DELETED 52.243-1 CHANGES--FIXED PRICE AUG/1987

20 DELETED 52.246-23 LIMITATION OF LIABILITY FEB/1997

21 DELETED 52.247-68 REPORT OF SHIPMENT (REPSHIP) FEB/2006

22 DELETED 252.204-7000 DISCLOSURE OF INFORMATION OCT/2016

23 DELETED 252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT APR/1992

24 ADDED 252.204-7004 ANTITERRORISM AWARENESS TRAINING FOR CONTRACTORS FEB/2019

25 ADDED 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023) JAN/2023

26 DELETED 252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES APR/2022

27 ADDED 252.225-7016 RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (JAN 2023) JAN/2023

28 DELETED 252.225-7033 WAIVER OF UNITED KINGDOM LEVIES APR/2003

29 DELETED 252.225-7048 EXPORT-CONTROLLED ITEMS JUN/2013

30 ADDED 252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND JAN/2023

TUNGSTEN (JAN 2023)

31 DELETED 252.227-7016 RIGHTS IN BID OR PROPOSAL INFORMATION (JAN 2023) JAN/2023

32 DELETED 252.231-7000 SUPPLEMENTAL COST PRINCIPLES DEC/1991

33 DELETED 252.243-7001 PRICING OF CONTRACT MODIFICATIONS DEC/1991

34 ADDED 252.244-7000 SUBCONTRACTS FOR COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES (JAN JAN/2023

2023)

35 ADDED 252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023) JAN/2023

36 CHANGED 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR SEP/2023

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (SEP

2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered

Entities (Nov 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021)

(Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) ( 31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10

13 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L.

111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of

Div. C).

_X_ (8) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

_X_ (9) 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for

Debarment. (Nov 2021) ( 31 U.S.C. 6101 note).

__ (10) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

__ (11) [Reserved].

__ (12) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

__ (13) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

__ (14) [Reserved]

__ (15)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (16)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

_X_ (17) 52.219-8, Utilization of Small Business Concerns (Sep 2023) ( 15 U.S.C. 637(d)(2) and (3)).

__ (18)

(i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Sep 2023) of 52.219-9.

__ (19)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) ( 15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

14 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

__ (20) 52.219-14, Limitations on Subcontracting (Oct 2022) ( 15 U.S.C. 637s).

__ (21) 52.219-16, Liquidated DamagesSubcontracting Plan (Sep 2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

__ (22) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Oct 2022) ( 15 U.S.C. 657f).

_X_ (23)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2023)( 15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (24) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct

2022) ( 15 U.S.C. 637(m)).

__ (25) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned

Small Business Program (Oct 2022) ( 15 U.S.C. 637(m)).

__ (26) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)).

__ (27) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15U.S.C. 637(a)(17)).

__ (28) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_X_ (29) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Dec 2022) (E.O.13126).

_X_ (30) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (31)

(i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

_X_ (32)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

_X_ (33)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

_X_ (34) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (35) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X_ (36)

(i) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (37) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR

22.1803.)

__ (38)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPADesignated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)).

(Not applicable to the acquisition of commercially available off-the-shelf items.)

15 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

__ (ii) Alternate I (May 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

_X_ (39) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (40) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

__ (41)

(i) 52.223-13, Acquisition of EPEAT\'ae-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (42)

(i) 52.223-14, Acquisition of EPEAT\'ae-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (43) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) ( 42 U.S.C. 8259b).

__ (44)

(i) 52.223-16, Acquisition of EPEAT\'ae-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (45) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

__ (46) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

__ (47) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (48)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

__ (49)

(i) 52.225-1, Buy American-Supplies (Oct 2022) ( 41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

__ (50)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Dec 2022) ( 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-

169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (Dec 2022) of 52.225-3.

__ (iv) Alternate III (Jan 2021) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

__ (51) 52.225-5, Trade Agreements (Dec 2022) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (52) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (53) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of

16 39

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

__ (54) 52.226-4, Notice of Disaster or Emergency Area…