Spec_-_Ford_Ranger_Pickup.doc

Specification October 2019

PICK-UP TRUCK, FORD RANGER

THE PICK-UP TRUCK SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a 4x4 Ford Ranger, 4-door(Full/Crew), Pick-Up Truck.

1.2. The vehicle shall be a 2018 model year or later, with at most 300 miles (483 km) on the odometer.

1.3. The vehicles shall be left hand drive (LHD).

1.4. The vehicles shall be equipped with a diesel engine.

1.4.1. The engine shall be able to operate long-term on high sulfur diesel fuel (5,000 ppm sulfur).

1.5. The vehicles shall be provided with an automatic transmission.

1.6. The vehicles shall be equipped with on/off road tires, including a full-size spare

1.7. The exterior paint shall be a different color on each vehicle (no two alike), and be the manufacturer’s closest versions of black, white, grey, and tan.

2. EQUIPMENT

2.1. The vehicles shall be equipped with all the standard equipment typically found on a 4x4 Ford Ranger 4-door(Full/Crew) Pick-Up Truck.

2.2. A Grille/Brush Guard with integrated headlight protection shall be provided.

2.3. Front and rear anti-sail mud flaps shall be provided.

2.4. Towing package:

2.4.1. Vehicle shall be provided with a rear-mounted ball and pintle hitch, with the capability to tow up to 7,500 lbs (3,402 kg).

2.4.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

2.4.2. An SAE J560 7 pin, 12 volt electrical connector for trailers shall be provided.

2.5. The vehicles shall be provided with antilock brakes system (ABS.)

2.6. An ABC type fire extinguisher, minimum 2.2 lb (1.0 kg) capacity, with mounting bracket shall be provided.

2.7. Manuals shall be provided, written in English, including:

2.7.1. An Owner’s manual

2.7.2. A Service manual

2.7.3. A Parts manual

3. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

3.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as:

3.1.1. Savi ST-654-041

3.1.2. Savi ST-654-031

3.1.3. Identec I-Q310 DRT

3.1.4. Evigia EV3-DRT

3.2. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

3.3. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

3.4. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 "Commodity Item Database Format" with the following clarifications:

3.4.1. The "document field" titled "DOCUMENT" shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

3.4.2. The "MISC1" field shall be the item serial number, if available.

3.4.3. The "MISC2" field shall be used for user comments (e.g. contract number).