Specification_-_Ford_F250_Crew_Cab_4x4.doc

Specification (Attachment 0001) October 2017

TRUCK, PICK-UP, FORD F250

THE PICK-UP SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a 4x4 Ford F250, 4 door Crew Cab Pick-Up Truck.

1.2. The vehicle shall be provided with a 6 3/4 foot box.

1.3. The vehicle shall be a 2017 model year or later, with no more than 200 miles (320 km) on the odometer.

2. EQUIPMENT

2.1. An ABC type fire extinguisher, minimum 2.2 pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.2. The vehicle shall be provided with a basic safety pack to include at least a first aid kit with non-expired items, three triangles, and tow rope.

2.3. The vehicle shall be provided with a portable 12 volt air compressor kit to include pump, hose, and fittings.

2.4. The vehicle shall be provided with storage to secure the basic safety pack and portable 12 volt air compressor kit.

2.5. Operator manual(s) shall be provided with the vehicle, written in English.

2.6. Rear axle shall be provided with a limited-slip

2.7. Truck bed shall be provided with a drop-in bed liner.

2.8. LED box lighting shall be provided.

2.9. LED roof marker clearance lights shall be provided.

2.10. Front and rear wheel well liners shall be provided.

2.11. Platform running boards shall be provided.

2.12. Up-fitter switches shall be provided.

3. DIMENSIONS

3.1. The vehicle wheelbase shall be 159.8 inches (4,059 mm).

4. ENGINE

4.1. The vehicle shall have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of ½%).

4.2. The vehicle shall have an export engine and not be provided with emission control devices, such as but not limited to the Exhaust Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), and Diesel Oxidation Catalyst (DOC).

4.3. High-Sulfur Diesel Modification Package code 98H must be provided.

5. TRANSMISSION

5.1. The vehicle shall be provided with an automatic transmission, 6 speed.

5.2. Electronic Shift on the Fly (ESOF) shall be provided.

6. Steering

6.1. The vehicle shall be left-hand drive.

7. COLOR

7.1. The exterior color of the vehicle and troop carrier will be oxford white or OD green as specified in the solicitation.

8. TOWING

8.1. Vehicle shall be provided with a trailer hitch receiver with a pintle with trailer tow package.

8.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

8.2. An electric brake controller shall be installed and operable.

9. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

9.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

9.1.1. Savi ST-654-031

9.1.2. Savi ST-654-041

9.1.3. Identec I-Q310 DRT

9.1.4. Evigia EV3-DRT

9.2. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

9.3. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

9.4. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

9.4.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

9.4.2. The “MISC1” field shall be the item serial number, if available.

9.4.3. The “MISC2” field shall be used for user comments (e.g. contract number).