Attachment_0002_Technical_Information_Questionnaire_-_Ford_F250_Crew_Cab_4x4.doc

Solicitation

Technical Information Questionnaire (TIQ) (Attachment 0002) October 2017

FAILURE TO PROVIDE ALL OF THE INFORMATION REQUIRED BELOW MAY RENDER YOUR PROPOSAL INELIGIBLE FOR AWARD.

TRUCK, PICK-UP, FORD F250

The purpose of this questionnaire is to determine the suitability of your equipment to satisfy the requirements as stated in the specification. YOU MUST PROVIDE A RESPONSE TO ALL QUESTIONS. Failure to provide a response may result in the rejection of your proposal.

Units: The data provided in the response to the Technical Information Questionnaire (TIQ) shall be provided in English units, unless otherwise specified. Metric units may be provided if clearly defined and identified.

All written information shall be in English.

In addition to responding to the questions below, the offeror shall provide the following:

(a) Vehicle and major component commercial literature or specification sheets or any other information that would substantiate the information provided. If your commercial literature does not provide information relating to a particular question, you are required to provide a written explanation of your ability to meet that particular requirement with your written proposal. Where indicated herein, supporting documentation must be provided along with the location of that information stated (e.g. page number, paragraph, etc).

1) Supporting documentation is required for sections 1(c), 2(a)(1), and 4(c)1.

(b) Identification of all modifications and/or redesigns to the previously manufactured base vehicle necessary to meet the requirements of the specifications. The offeror shall also explain in detail the reasons for the modifications or redesigns.

Information Notes

(a) For components procured by the vehicle manufacturer, the component manufacturer’s name and model or part number shall be shown.

(b) Curb weight shall be weight of vehicle offered, completely equipped with coolant, fuel and lubricants, less the weight of a fully loaded vehicle and crew (driver and passengers) and troops. Weight distribution empty shall be based on curb weight.

(c) Gross Vehicle Weight (GVW) shown shall include vehicle’s curb weight, weight of the crew (450 pounds), and weight of a fully loaded vehicle.

GENERAL INFORMATION REQUIRED

Personnel Responding to Questionnaire:

(a) Name:

(b) Job Title:

(c) Company Name:

(d) Telephone/Fax Numbers:

(e) E-mail address:

(f) Mailing address:

(g) Company Website:

Comments:

TRUCK, PICK-UP, FORD F250

1. CONFIGURATION

(a) Is the vehicle a 4x4 Ford F250 4 door Crew Cab Pick-Up Truck? FORMDROPDOWN

(b) Is the vehicle a 2017 model year or later, with no more than 200 miles on the odometer? FORMDROPDOWN

(c) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all options provided with the 4x4 Ford F250 4-door Crew Cab Pick-Up Truck must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

Comments:

2. EQUIPMENT

(a) Is the vehicle equipped with all of the standard equipment typically found on a 4x4 Ford F250 2-door Pick-Up Truck? FORMDROPDOWN

1) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all standard equipment found on a 4x4 Ford F250 2-door Pick-Up Truck must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

(b) Is the rear axle provided with a limited-slip differential? FORMDROPDOWN , if yes, which axle ratio is provided?

Comments:

3. DIMENSIONS (inches)

(a) Wheelbase:

4. ENGINE

(a) Does the vehicle have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of ½%)? FORMDROPDOWN

(b) Is the vehicle provided with any emission control devices? FORMDROPDOWN if yes, list emission control devices

(c) What Ford export model code option is being provided?

1) SUPPORTING DOCUMENTATION REQUIRED: A Ford spec sheet with this export model code listed must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

Comments:

5. TRANSMISSION

(a) Type: FORMDROPDOWN

(b) Is Electronic Shift on the Fly (ESOF) provided? FORMDROPDOWN

Comments:

6. STEERING

(a) Is the vehicle left-hand drive? FORMDROPDOWN

Comments:

7. COLOR

(a) Is the exterior color of the vehicle and troop carrier oxford white or OD green? FORMDROPDOWN

Comments:

8. TOWING

(a) Is the vehicle equipped with a trailer hitch receiver and a pintle? FORMDROPDOWN , if yes:

1) Pintle Manufacturer:

(b) Is a trailer tow package and electric brake controller provided? FORMDROPDOWN

Comments:

9. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

(a) Is each vehicle or item and associated lot of spares tagged with a removable active RFID tracking tag? FORMDROPDOWN Manufacturer Model

(b) Will the tag’s electronic format be in compliance with the Joint Total Asset Visibility (JTAV) version 2.0 specifications, section 3.4.1 format? FORMDROPDOWN

(c) Which company or agency will “write to” or “program” the tag?

Comments:

SOURCE SELECTION SENSITIVE, SEE FAR 3.104