W56HZV17Q0035-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0001 2017APR04

W56HZV

U.S. ARMY CONTRACTING COMMAND

WARREN, MICHIGAN 48397-5000

KATHY KESSLER

EMAIL: KATHY.A.KESSLER.CIV@MAIL.MIL

W56HZV-17-Q-0035

2017FEB27

X

X 2017MAY02 03:30pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 3

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: KATHY KESSLER

Buyer Office Symbol/Telephone Number: CCTA-HDB-N/(586)282-3538

Type of Contract 1: Firm Fixed Price

Kind of Contract: Other

Weapon System: Nontactical Wheeled Vehicles

*** End of Narrative A0000 ***

AMENDMENT 0001 IS TO EXTEND THE CLOSING DATE AND CHANGE SPECIFICATION AND TIQ INFO.

SOLICITATION CLOSING DATE IS BEING EXTENDED TO 2 MAY 2017.

SPECIFICATION IDENTIFIES THE TYPE OF EXPORT VEHICLE NEEDED.

*** END OF NARRATIVE A0002 ***

2 3

W56HZV-17-Q-0035 0001

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0001 FORD F-450 SPECIFICATION 31-MAR-2017 002 DATA

Attachment 0002 TIQ FOR FORD F-450 01-MAR-2017 004 EMAIL

3 3

W56HZV-17-Q-0035 0001

PIIN/SIIN

MOD/AMD

ATT/EXH ID

PAGE

Attachment 0001

ATTACHMENT 0001

March 2017

TRUCK, PICK-UP, FORD F450 CREW CAB 4X4 DUALLY

THE PICK-UP SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURERS STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND

CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a 4x4 Ford F450, 4 full door, Crew Cab Pick-Up Truck, export model.

1.1.1. The vehicle shall have a single rear axle with 4 wheels and tires (dually configuration).

1.2. The vehicle shall be configured with the 8 ft rear box.

1.3. The vehicle shall be a 2017 model year or later, with no more than 100 miles (160 km) on the odometer.

2. EQUIPMENT

2.1. Manual telescoping trailer tow mirrors with power heated glass shall be provided and installed.

2.2. The vehicle shall be provided front and rear cloth seats.

2.3. An ABC type fire extinguisher, minimum 2.2 pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.4. The vehicle shall be provided with a basic safety pack to include at least a first aid kit with non-expired items, three triangles, and tow rope.

2.5. The vehicle shall be provided with a portable 12 volt air compressor kit to include pump, hose, and fittings.

2.6. The vehicle shall be provided with storage to secure the basic safety pack and portable 12 volt air compressor kit.

2.7. An exterior back-up alarm shall be provided and installed.

2.8. A drop-in bed liner shall be provided.

2.9. Operator manual(s) shall be provided with the vehicle, written in English.

2.10. Air conditioning Manual Temperature Control Exterior Features

2.11. Roof Clearance Lights

2.12. Tailgate Tailgate Assist and quick release

2.13. Tie-down hooks in pickup box, six required

2.14. Tow hooks (2) front

2.15. Grab handles driver and front passenger and roof ride handles; front passenger

2.16. Brakes-4 wheel power disc brakes with Anti-lock Brake System (ABS)

2.17. Trailer sway control

2.18. Front stabilizer bar

2.19. Tire pressure monitoring system

2.20. Spare tire with lock and frame mounted carrier

2.21. Jack, 4 ton hydraulic

2.22. Gas shock absorbers

2.23. Rear, 60/40 Flip-up/Fold-Down bench seat with lockable storage

3. DIMENSIONS

3.1. The vehicle wheelbase shall be 176 inches (4,470 mm).

4. ENGINE

4.1. The vehicle shall have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of \'bd%).

4.2. The vehicle shall have an export engine and not be provided with emission control devices, such as but not limited to the Exhaust

Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), and Diesel Oxidation Catalyst (DOC).

4.3 High-Sulfer Diesel Modification Package code 98H must be provided.

5. TRANSMISSION

5.1. The vehicle shall be provided with an automatic transmission, 6 speed.

5.2. A manually operated transfer case shall be provided.

6. STEERING

6.1. The vehicle shall be left-hand drive with power steering and steering damper.

7. COLOR

7.1. The exterior color of the vehicle will be blue. (Ford color chip Blue Jean N-1)

8. TOWING

W56HZV-17-Q-0035

PIIN/SIIN

MOD/AMD

ATT/EXH ID

PAGE

Attachment 0001

8.1. Vehicle shall be provided with a trailer hitch receiver with a pintle with trailer tow package

8.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

8.2. The vehicle shall be provided with the electric trailer brake controller and installed.

9. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

9.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

9.1.1. Savi ST-654-031

9.1.2. Savi ST-654-041

9.1.3. Identec I-Q310 DRT

9.1.4. Evigia EV3-DRT

9.2. The active RFID tag shall have at least 128 Kbytes of memory.

9.3. The active RFID tag shall be compliant with ISO 18000/7.

9.4. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

9.5. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

9.6. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset

Visibility (JTAV) version 2.0, section 3.4.1 Commodity Item Database Format with the following clarifications:

9.6.1. The document field titled DOCUMENT shall be the document number (e.g. milstrip) as specified by the Government procuring agency.

9.6.2. The MISC1 field shall be the item serial number, if available.

9.6.3. The MISC2 field shall be used for user comments (e.g. contract number).

9.6.3. 1.The JTAV - V2.0 data format specification is available at:

http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf

W56HZV-17-Q-0035