Spec_-_Ford_F450_Crew_Cab_4x4.doc

Solicitation Specification (Attachment 0001) December 2016

TRUCK, PICK-UP, FORD F450 CREW CAB 4X4 DUALLY

THE PICK-UP SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a 4x4 Ford F450, 4 full door, Crew Cab Pick-Up Truck.

1.1.1. The vehicle shall have a single rear axle with 4 wheels and tires (dually configuration).

1.2. The vehicle shall be configured with the 8 ft rear box.

1.3. The vehicle shall be a 2017 model year or later, with no more than 100 miles (160 km) on the odometer.

2. EQUIPMENT

2.1. Manual telescoping trailer tow mirrors with power heated glass shall be provided.

2.2. The vehicle shall be provided front and rear cloth seats.

2.3. An ABC type fire extinguisher, minimum 2.2 pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.4. The vehicle shall be provided with a basic safety pack to include at least a first aid kit, three triangles, and tow rope.

2.5. The vehicle shall be provided with a portable 12 volt air compressor kit to include pump, hose, and fittings.

2.6. The vehicle shall be provided with storage to secure the basic safety pack and portable 12 volt air compressor kit.

2.7. An exterior back-up alarm shall be provided.

2.8. A drop-in bed liner shall be provided.

2.9. Operator manual(s) shall be provided with the vehicle, written in English.

3. DIMENSIONS

3.1. The vehicle wheelbase shall be 176 inches (4,470 mm).

4. ENGINE

4.1. The vehicle shall have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine.

5. TRANSMISSION

5.1. The vehicle shall be provided with an automatic transmission.

5.2. A driver-selectable transfer case shall be provided.

5.2.1. The transfer case shall be the Electronic Shift-On-the-Fly (ESOF) version.

6. Steering

6.1. The vehicle shall be left-hand drive.

7. COLOR

7.1. The exterior color of the vehicle will be blue.

8. TOWING

8.1. Vehicle shall be provided with a trailer hitch receiver with a pintle.

8.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

8.2. The vehicle shall be provided with the electric trailer brake controller.

9. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

9.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

9.1.1. Savi ST-654-031

9.1.2. Savi ST-654-041

9.1.3. Identec I-Q310 DRT

9.1.4. Evigia EV3-DRT

9.2. The active RFID tag shall have at least 128 Kbytes of memory.

9.3. The active RFID tag shall be compliant with ISO 18000/7.

9.4. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

9.5. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

9.6. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

9.6.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

9.6.2. The “MISC1” field shall be the item serial number, if available.

9.6.3. The “MISC2” field shall be used for user comments (e.g. contract number).

9.6.3.1. The JTAV - V2.0 data format specification is available at:

http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf