Quality_Assurance_Provisions_Part_Number_11-1-2061.pdf

25 Nov 2014

Quality Assurance Provisions:

Cable Assembly, Coupling

P/N: 11-1-2061

1. First Article Test (FAT). The FAT includes:

a. A review of material and process Certifications of Compliance.

b. End Item Visual Examination (see 3.3).

c. End Item Dimensional Examination (see 3.4).

d. End Item Testing (see 3.5).

2. Acceptance/rejection criteria for the FAT. Materials not as specified on the drawing, any visual defect any dimension out of tolerance or not meeting the FAT requirements of drawing 11-1-4220 and 11-1-4222 as applicable shall be cause for rejection of the FAT.

3. Conformance Inspection

3.1 Sampling. Sampling shall be performed in accordance with ANSI/ASQ Z1.4.

3.2 Conformance inspection. The items shall be examined for materials and the requirements of 3.3 and 3.4 and 3.5

3.3 End item visual examination. The items shall be examined for the nonconformities/defects in accordance with drawing 11-1-4220. The lot size shall be expressed in units of cable assemblies. The sample unit shall be one cable assembly.

Any nonconformity shall be cause for rejection of the lot.

3.4 End Item Dimensional Examination. The contractor shall submit a quality plan to the government for approval prior to the FAT. The plan must detail methods of inspections to insure the items are manufactured and tested to the requirements of the

Technical Data Package. The cable assembly shall be examined for conformance to the dimensions specified on drawing 11-1-2061. Any dimension not within the specified tolerance shall be classified as a nonconformity/defect. The lot size shall be expressed in unite of cable assemblies. The sample unit shall be one cable assembly. The inspection level shall be in accordance with drawing 11-1-4220. The cable critical dimensions and functions shall be in accordance with drawing 11-1-4222.

3.5 End Item Testing. Drawing 11-1-2061 and 11-1-4222, provides the item testing requirements for the FAT and lot inspections.

4. Classification of nonconformities. Classification of nonconformities not listed in drawing 11-1-4220 shall be as specified by the procuring activity.