W56HZV-24-D-0013.pdf

AWARD/CONTRACT 1. This Contract Is A Rated Order Under DPAS (15 CFR 700)

Rating Page Of Pages

2. Contract (Proc. Inst. Ident.) No. 3. Effective Date 4. Requisition/Purchase Request/Project No.

5. Issued By Code 6. Administered By (If Other Than Item 5) Code e-mail address:

7. Name And Address Of Contractor (No., Street, City, County, State and Zip Code) 8. Delivery

FOB Origin Other (See Below)

9. Discount For Prompt Payment

10. Submit Invoices Item (4 Copies Unless Otherwise Specified)

Code Facility Code To The Address Shown In:

11. Ship To/Mark For Code 12. Payment Will Be Made By Code

13. Authority For Using Other Than Full And Open Competition: 14. Accounting And Appropriation Data

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( )

15A. Item No. 15B. Supplies/Services 15C. Quantity 15D. Unit 15E. Unit Price 15F. Amount

15G. Total Amount Of Contract

16. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses

B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attachments

C Description/Specs./Work Statement J List of Attachments

D Packaging and Marking Part IV - Representations And Instructions

E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors

H Special Contract Requirements M Evaluation Factors for Award Contracting Officer Will Complete Item 17 (Sealed-Bid or Negotiated Procurement) Or 18 (Sealed-Bid Procurement) As Applicable

17. Contractor’s Negotiated Agreement (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all the services set forth or otherwise identified above and on any continuation sheets for the consideration stated herein. The rights and obligations of the parties to this contract shall be subject to and governed by the following documents: (a) this award/contract, (b) the solicitation, if any, and (c) such provisions, representations, certifications, and specifications, as are attached or incorporated by reference herein. (Attachments are listed herein.)

18. Sealed-Bid Award (Contractor is not required to sign this document.) Your bid on Solicitation Number , including the additions or changes made by you which additions or changes are set forth in full above, is hereby accepted as to the items listed above and on any continuation sheets. This award consummates the contract which consists of the following documents: (a) the Government’s solicitation and your bid, and (b) this award/contract. No further contractual document is necessary. (Block 18 should be checked only when awarding a sealed-bid contract.)

19A. Name And Title Of Signer (Type Or Print) 20A. Name Of Contracting Officer

19B. Name of Contractor 19c. Date Signed 20B. United States Of America 20C. Date Signed

By By

(Signature of person authorized to sign) (Signature of Contracting Officer)

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 26 (Rev. 5/2011) Previous edition is NOT usable Prescribed By GSA - FAR (48 CFR) 53.214(a)

DOA4

W56HZV-24-D-0013 2024FEB01 SEE SCHEDULE

W56HZV

ACC-DTA

6501 E. 11 MILE RD.

DETROIT ARSENAL, MI 48397-5000

MARGUERITE STRELECKI

MARGUERITE.M.STRELECKI.CIV@ARMY.MIL

S1403A

DCMA CHICAGO

1523 WEST CENTRAL ROAD

BLDG 203

ARLINGTON HEIGHTS IL 60005-2451

98255

DRS SUSTAINMENT SYSTEMS, INC.

DRS SUSTAINMENT SYSTEMS, INC.

4201 INNOVATION WAY

BRIDGETON, MO 63044-2309

X

SEE SCHEDULE

HQ0339

DFAS - COLUMBUS CENTER

WEST ENTITLEMENT OPERATIONS

P O BOX 182317

COLUMBUS OH 43218-2317

X 1

SEE SCHEDULE

$0.00

X

2 signed

KELLY A. KOWALSKI

KELLY.A.KOWALSKI.CIV@ARMY.MIL (586)282-8607

/SIGNED/ 2024FEB01

1 71

X 1

X 3

X 7

X 20

X 22

X 23

X 28

X 30

X 35

X 71

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: MARGUERITE STRELECKI

Buyer Office Symbol/Telephone Number: CCTA-APS-A/(571)588-9260

Type of Contract 1: Cost Plus Fixed Fee

Kind of Contract: Service Contracts

Type of Business: Large Business Performing in U.S.

Surveillance Criticality Designator: C

Contract Expiration Date: 2029JAN31

*** End of Narrative A0000 ***

A.1 ACCEPTANCE APPENDIX

(a) Contract Number W56HZV-24-D-0013 is awarded to DRS Sustainment Systems, Inc.

(b) The contractor, in its proposal, provided data for various solicitation clauses, and that data has been added in this contract.

(c) Any attachments not included within this document will be provided by ACC-DTA directly to the administrative contracting officer

(ACO) via e-mail as required. Technical data packages that are only available on CD-ROM will be mailed by ACC-DTA to the ACO. Within one week of this award, any office not able to obtain these attachments from System for Award Management (SAM) at beta.sam.gov and still requiring a copy, can send an e-mail request to the buyer listed on the front page of this contract.

(d) The following Amendment(s) to the solicitation are incorporated into this contract: 001, 002, and 003.

*** END OF NARRATIVE A0001 ***

2 71

W56HZV-24-D-0013

DRS SUSTAINMENT SYSTEMS, INC.

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

B.1 This is a 5 year Cost Plus Fixed Fee (CPFF), Indefinite Delivery Indefinite Quantity (IDIQ) contract to procure System Technical

Support (STS), Sustainment System Technical Support (SSTS) and Post Production Software Support (PPSS) for the Stryker Fire Support

Vehicle (FSV) Mission Equipment Package (MEP).

B.1.1 Contract Minimum and Maximum:

Contract Minimum: $ 300,000

Contract Maximum: $42,500,000

B.1.1 The contract will establish the negotiated composite hourly rates for required engineers and logisticians, to include Field

Service Representative (FSR), and establish an estimated dollar amount for material and other direct costs (ODC), including travel and fee, that may be awarded for each ordering period under a task order. The Government will award based on a negotiated portion of hours by Work Directive, either Term (Level of Effort) or Completion, at the time of task order award or by modification to the task order.

B.2 CLIN Structure:

The first three digits of each Contract Line Item Number (CLIN) signifies the item and the last digit signifies the applicable contract year. For example, CLIN 0011 is the first item, first ordering period; CLIN 0012 is the first item, second ordering period; CLIN 0013 is the first item, third ordering period. Each ordering period will have will have a separate composite hourly rate for engineering and logistics that will be used for each Work Directive issued during that ordering period. The CLIN structure is as follows:

CLIN 0011 First Ordering Period

CLIN 0012 Second Ordering Period

CLIN 0013 Third Ordering Period

CLIN 0014 Fourth Ordering Period

CLIN 0015 Fifth Ordering Period

B.3 Ordering Periods:

B.3.1 CLIN 0011: First Ordering Period - Date of contract award plus 364 days

Total Estimated Hours: 41,092

Total Estimated Material Fee: 4%

Travel: No Fee

Total Estimated ODCs (inclusive of Travel):

Total Estimated ODC Fee: 4%

Composite Hourly Rate (Engineering):

Rate: $168.51

Fixed Fee: $15.06

Total CPFF: $183.57

Composite Hourly Rate (Logistics):

Rate: $138.83

Fixed Fee: $12.40

Total CPFF: $151.23

B.3.2 CLIN 0012: Second Ordering Period - 365 days through 729 days after contract award

Total Estimated Hours: 41,092

Total Estimated Material Fee: 4%

Total Estimated ODCs (inclusive of Travel):

Total Estimated ODC Fee: 4%

Travel: No Fee

Composite Hourly Rate (Engineering):

Rate: $173.10

Fixed Fee: $15.47

Total CPFF: $188.56

Composite Hourly Rate (Logistics):

Rate:$142.58

Fixed Fee: $12.73

Total CPFF: $155.31

3 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

B.3.3 CLIN 0013: Third Ordering Period - 730 days through 1,094 days after contract award

Total Estimated Hours: 41,092

Total Estimated Material Fee: 4%

Total Estimated ODCs (inclusive of Travel):

Total Estimated ODC Fee: 4%

Travel: No Fee

Composite Hourly Rate (Engineering):

Rate: $177.80

Fixed Fee: $15.89

Total CPFF: $193.68

Composite Hourly Rate (Logistics):

Rate: $ 146.44

Fixed Fee: $13.08

Total CPFF: $159.51

B.3.4 CLIN 0014: Fourth Ordering Period - 1,095 days through 1,459 days after contract award

Total Estimated Hours: 41,092

Total Estimated Material Fee: 4%

Total Estimated ODCs (inclusive of Travel):

Total Estimated ODC Fee: 4%

Travel: No Fee

Composite Hourly Rate (Engineering):

Rate: $182.78

Fixed Fee: $16.33

Total CPFF: $199.11

Composite Hourly Rate (Logistics):

Rate: $150.53

Fixed Fee: $13.44

Total CPFF: $163.97

B.3.5 CLIN 0015: Fifth Ordering Period -1,460 days through 1,824 days after contract award

Total Estimated Hours: 41,092

Total Estimated Material Fee: 4%

Total Estimated ODCs (inclusive of Travel):

Total Estimated ODC Fee: 4%

Travel: No Fee

Composite Hourly Rate (Engineering):

Rate: $187.92

Fixed Fee: $16.79

Total CPFF: $204.72

Composite Hourly Rate (Logistics):

Rate: $154.75

Fixed Fee: $13.82

CPFF: $168.57

*** END OF NARRATIVE B0001 ***

4 71

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0011 FIRST ORDERING PERIOD Estimated _____________________

Cost $ 6,302,494.00 __________________

Fixed Fee $ 562,991.00 __________________

Not to Exceed

(Funding) $ 6,865,485.00 __________________

SERVICE REQUESTED: FSV MEP STS-SSTS-PPSS

PSC: R425

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

0012 SECOND ORDERING PERIOD Estimated ______________________

Cost $ 6,473,251.00 __________________

Fixed Fee $ 578,243.00 __________________

Not to Exceed

(Funding) $ 7,051,494.00 __________________

SERVICE REQUESTED: FSV MEP STS-SSTS-PPSS

PSC: R425

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

0013 THIRD ORDERING PERIOD Estimated _____________________

Cost $ 6,648,773.00 __________________

Fixed Fee $ 593,922.00 __________________

Not to Exceed

(Funding) $ 7,242,695.00 __________________

SERVICE REQUESTED: FSV MEP STS-SSTS-PPSS

PSC: R425

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

0014 FOURTH ORDERING PERIOD Estimated ______________________

Cost $ 6,834,857.00 __________________

Fixed Fee $ 610,545.00 __________________

Not to Exceed

(Funding) $ 7,445,402.00 __________________

SERVICE REQUESTED: FSV MEP STS-SSTS-PPSS

PSC: R425

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

0015 FIFTH ORDERING PERIOD Estimated _____________________

5 71

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Cost $ 7,026,902.00 __________________

Fixed Fee $ 627,700.00 __________________

Not to Exceed

(Funding) $ 7,654,602.00 __________________

SERVICE REQUESTED: FSV MEP STS-SSTS-PPSS

PSC: R425

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

9001 SERVICE CONTRACT REPORTING $ ** NSP ** __________________________ __________________

SERVICE REQUESTED: SERVICE CONTRACT REPORTING

PSC: R608

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

Contractor Manpower Reporting, in accordance with

Section C, Clause C-4.

(End of narrative B001)

9002 DATA ITEMS - CDRLS $ ** NSP ** __________________ __________________

SERVICE REQUESTED: DATA ITEMS

PSC: R608

CLIN CONTRACT TYPE:

Cost Plus Fixed Fee

Data deliverables, including Technical Data, as set forth in the Contract Data Requirement List (CDRL), currently CDRLs A01-A031, which are Exhibits specified in Section J.

These CDRLs are not separately priced, and are required contract deliverables, based on Work

Directives to be added to the contract by task order for each ordering period. CDRLs will be added as necessary based on the Work Directives.

(End of narrative B001)

6 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

PERFORMANCE WORK STATEMENT

C.1 INTRODUCTION

C.1.1 This non-personal service Performance Work Statement (PWS) establishes the requirements for contractor-provided services to

Project Management Office Stryker Brigade Combat Team (PMO SBCT). Under this contract, the contractor shall provide, on a Work Directive

(WD) basis, System Technical Support (STS), Sustainment System Technical Support (SSTS), and Post Production Software Support (PPSS) functions, in addition to any associated materials and equipment as specified. The contractor shall provide these technical services to support the Mission Equipment Package (MEP) of the Stryker Fire Support Vehicle (FSV) Family of Vehicles (FoV) (FSV, FSVV, and FSVV-A1).

C.1.2 The contractor shall work as an independent contractor and not as an agent or employee of the Government. Contractor personnel, consultants, and subcontractor personnel providing services hereunder are under the sole administrative control and supervision of the contractor, regardless of location. The Government will not exercise any supervision or control over the contractor personnel, consultants, or subcontractor personnel performing the services herein. Such personnel shall be accountable solely to the contractor.

C.1.3 Work Directives (WDs). All work shall be completed in accordance with the WDs, to include reference to the applicable PWS paragraphs, issued by the Procuring Contracting Officer (PCO). Each WD will specify a description of work to be performed, costs, period of performance, and any required deliverables. WDs can be executed under this contract as either term (level of effort) scope or completion scope. Each WD shall be within the general scope of this contract and will be incorporated, via modification, into Section C of the applicable Task Order.

C.1.3.1 Work Directive Type. Each WD will indicate if it is a Term WD (also referred to as Level of Effort (LOE)) or Completion WD based on the requirements stated within the WD.

C.2. GENERAL REQUIREMENTS

C.2.1 Access to Data. On request by the PCO or Contracting Officers Representative (COR), the contractor agrees to provide access to records and data pertaining to performance of work on this contract. The Government shall have access rights to all data (e.g. hard copy and computer files generated under this contract, and all underlying data and files) generated under this contract as well as reports, assessments, software programs, and technical reports and analyses.

C.2.2 The Government may provide to the contractor components, subsystems (built up from several components), systems, vehicles, Government Furnished Material (GFM), Government Furnished Systems (GFS), or data as Government Furnished Equipment (GFE) or Government

Furnished Information (GFI) for installation onto or into projects or programs for integration, testing and evaluation. For the duration of this contract, the Government will provide an AN/PYQ-10 Simple Key Loader (SKL) for use by the Contractor.

C.2.3 The contractor shall be responsible for integrating and or installing components or sub-systems (built up from several components) developed by independent developers or other Government contractors for testing and evaluation. These items will be provided as

Government Furnished Property (GFP).

C.2.3.1 The contractor shall establish and maintain non-disclosure agreements (NDAs) with any commercial entities who support contractor and provide a copy of the NDAs to the COR and PCO. Many programs PMO SBCT is involved in make use of proprietary information that requires NDAs. To be fully engaged in those programs on behalf of PMO SBCT, the contractor will be required to access that information but provide assurance that said information will not be proliferated.

C.2.3.2 The contractor is responsible for providing executed NDAs for all personnel supporting PMO SBCT under this contract in order to protect all proprietary, restricted, competition sensitive, or any other restricted (e.g. non-foreign disclosure due to public law) data that will be used or accessed during the execution of this contract. The contractor shall provide the executed NDAs to the COR and the

PCO prior to commencing work under the contract or obtaining the badges permitting access to the property.

C.2.4 The contractor shall not duplicate or otherwise provide efforts for any requirements under this contract that it has performed or is performing under any current or past Government contract(s). In the event that the Government issues a WD under this contract that is a duplication of any prior work or effort, the contractor shall promptly notify the PCO and the COR and shall identify and explain the duplication of work.

C.2.5 The contractor shall manage and control the resources necessary to ensure timely achievement of all requirements of this contract in the most economical manner possible.

C.2.6 The contractor shall (i) establish a single focal point, as Program Manager, who has management and fiscal responsibility over the entire contract and (ii) maintain a supporting program management system tailored to accomplishing the administrative, management, technical, and financial requirements of the tasks associated with each individual WD. The contractor shall provide the Government with the name and contact information for its designated Program Manager and shall notify the Government of any change in that designation.

7 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

C.2.7 Place of Performance. The contractor shall perform the work under this contract at Detroit Arsenal, Warren, MI; Selfridge Air

National Guard Base (SANG), Harrison Twp., MI; Contractor Location; and other CONUS and OCONUS location as defined by the individual

WDs.

C.2.8 Anticipated Travel. In conjunction with required engineering and technical services, and to the extent specified per the individual WDs, the contractor shall be required to travel for purposes such as: to observe or conduct tests, ensure compatibility of configuration changes and other integration services, and perform Modification Work Order retrofits, perform training, and furnish guidance to operational and maintenance personnel regarding the techniques of product/system modifications. Contractor personnel potentially may also travel to attend project meetings, present papers, and attend technical conferences. The number of trips and types of personnel shall be limited to the minimum required to accomplish work requirements.

C.2.8.1 Reimbursement of Travel Costs. Reimbursement for travel, subsistence, and lodging will be paid to the contractor only to the extent that is it necessary for performance of a WD under the contract and allowable under

FAR 31.205-46, Travel Costs.

C.2.8.1.1 All travel costs associated with the contractor employee(s) driving to/from work shall be at the contractors expense and not reimbursable by the Government. All other travel expenses are subject to the Joint Travel Regulation (JTR) and PCO approval. The

Government will not pay any travel expenses for the contractor employee to travel to/from his place of residence to/from worksite unless authorized as Rest and Recuperation (R&R) associated with OCONUS performance. There will be no reimbursement for local travel in and around the contractors place of performance at PMO SBCT (within a 50 mile radius). The Government will not pay for any non-mission related travel.

C.2.8.1.2 Fee/profit on travel expenses is not an allowable cost on any WD issued under this contract.

C.2.8.2 A trip report (including dates, time, location of travel, summary of the activities and an Action Item list) shall be delivered to the COR no later than five business days after completion of each trip (CDRL A008).

C.2.9 Contracting Officer Representative (COR).

C.2.9.1 The COR will monitor all technical aspects of the contract and assist in contract administration. The COR is authorized to perform the following functions:

C.2.9.1.1 Assure the contractor performs the technical requirements of the contract;

C.2.9.1.2 Perform inspections necessary in connection with contract performance; and

C.2.9.1.3 Maintain written and oral communications with the contractor concerning technical aspects.

C.2.9.2 The COR is not authorized to direct any changes to the contract. If the contractor believes either an out-of-scope change or an in-scope change has been directed, it is to notify the PCO in writing immediately and not proceed with this work until written authorization is received from the PCO.

C.3. SECURITY GUIDELINES

C.3.1 Security Classification Specification. The contractor shall adhere to the requirements of the DD Form 254 (Attachment 0001)

(Contract Security Classification Specification) for the protection of the unclassified information, Controlled Unclassified Information

(CUI), and classified information, data, hardware, and software generated for or provided in support of the program. To preserve national security interest, the contractor shall ensure all aspects of the contract and work performed are evaluated for conformance with security procedures and standards. The contractor shall evaluate all products for security implications and prepare appropriate security documents and plans.

C.3.2 Classification. The highest classification associated with this contract is Secret. The contractor shall ensure all personnel needing access to classified information meet clearance and access requirements. Refer to the DD Form 254 (Attachment 0001) for additional security and personnel requirements. Each Work Directive will specify the tasks that shall require the contractor employee to have a clearance. If no clearance is required, CUI guidelines apply.

C.3.3 Controlled Unclassified Information (CUI). CUI provided to or generated pursuant to this contract shall be protected. The procedures for the protection of CUI are outlined in the CUI Attachment to the DD Form 254, DoDI 5200.58 and DFARS 252.204-7012. The contractor shall ensure any covered defense information provided by the Government under this contract is destroyed or sanitized from contractor-owned media and reported in accordance with NIST Special Publication (SP) 800-88, Rev 1, Guidelines for Media Sanitization, December 2014, and returned to the owning organization upon the completion of the contract or as directed by the Contracting Officer.

C.3.4 Manage Security. The contractor shall manage security activities at the unclassified, CUI, and all applicable classification levels encompassing all security disciplines (Information Security, Operations Security, Anti-Terrorism and Force Protection, International Security, Physical Security, Communications Security, Information Systems Security, and Personnel Security). This

8 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

requirement is to utilize the above security functions to protect the programs information and technology.

C.3.5 Public Release Requests. The contractor shall screen all information submitted for determination of public release to ensure it is both unclassified and technically accurate. The contractor shall provide a letter of transmittal certifying a screening was conducted and that the contractor attests that the information is unclassified and technically accurate, to the best of the contractor's knowledge. The contractor shall not release program information outside of program channels until the Government review process is complete. The contractor shall submit all requests for public release approval through the Procuring Contracting Officer (PCO) for a review by Government technical and security personnel and by the Government's Public Affairs Officer (PAO). The PCO will, after appropriate review, either authorize or reject the request to disseminate Government information publicly. Note that authorization may be given contingent on specified changes being made to the material for which public release has been requested. The program requires 45 calendar days to process the request and render a decision. Requests for public release shall be sent electronically via encrypted email using cryptographic products that are National Institute for Standards and Technology/National Information Assurance Partnership

(NIST/NIAP) approved or mail a Compact Disc/Digital Video Disc (CD/DVD) using U.S. Postal First Class mail.

C.3.6 Information Flowdown. The contractor shall ensure the security requirements and guidelines contained in section C.3 is flowed down to U.S. subcontractors and consultants.

C.3.7 Operations Security (OPSEC) Requirements. The contractor is not required to produce an OPSEC Plan. U.S. contractors with access to CUI (e.g. technical data, information marked with a distribution statement or FOUO) or classified information shall be required to follow the Stryker Combat System Team OPSEC Plan, Attachment 0002. The contractor shall ensure that new personnel receive Stryker Combat

System Team OPSEC Plan specific training within 30 days of first task order award. To ensure awareness of the Stryker Combat System Team

OPSEC Plan, the contractor shall provide annual training for personnel supporting this contract on the contents of the Stryker Combat

System Team OPSEC Plan. Personnel who have taken the Stryker Combat System Team OPSEC Plan training within the last 12 months shall be considered compliant unless the Stryker Combat System Team OPSEC Plan has been revised since the last training. The contractor shall report IAW CDRL A022.

C.3.8 TEMPEST Requirements. Prior to the implementation of any TEMPEST countermeasures or expenditure of funds, a TEMPEST assessment will be conducted at every contractor facility electronically processing classified information. TEMPEST assessments will be marked at a minimum of CUI or classify according to content. The Army TEMPEST staff will review the information provided and determine if a formal

TEMPEST Countermeasures Review (TCR) is required. Notification will be provided by the Government Security Manager to the point of contact identified in the submission. The contractor will send a TCR request for their facility within 30 days after contract award to the Stryker Security Manager. The TCR request, if unclassified, shall be sent electronically via encrypted email using cryptographic products that are National Standards and Technology/National Information assurance Partnership (NIST/NIAP) approved or mail using U.S.

Postal First Class mail. If the TCR request is classified, please contact the Stryker security Manager for instruction. This requirement shall be flowed down to all U.S. subcontractors that use information Systems to process classified material. This meets the requirements as identified in the DFARS 252.239-7000 and AR 380-27.

C.3.9 OPSEC Awareness Training Requirements. All contractor employees shall complete OPSEC Awareness for Military Members, DoD

Employees and Contractors training. This training is available at: https://securityawareness.usalearning.gov/opsec/index.htm .

All training shall be completed and reported IAW CDRL A024 (OPSEC Awareness Training Report) and have available upon request all certificates of completion for initial and annual reporting requirements. An alternative method is to conduct face-to-face training in a classroom or auditorium setting utilizing a downloaded version of the CDSE OPSEC Awareness training with a sign-in or attendance sheets along with copies of the completed test questions/exam for the CDSE training for each participant verifying passing with a test score of

75% or better in lieu of certificates. The instructor will be OPSEC Level III certified to perform this alternative training method.

C.3.10 Common Access Card (CAC) or Installation Access Identification. Issuance of a CAC is authorized under this contract if one of the following requirements under Issuance is met.

C.3.10.1 Issuance. The contractor employee shall be issued a CAC only if duties involve one of the following: (1) Logical access to a

DoD network that requires a CAC for login or a DoD website that only accepts the CAC for login access; or (2) Both physical access to a

DoD facility and access, via logon, to DoD network on-site or remotely. Access to a DoD network must require the use of a computer with

Government-controlled configuration or use of a DoD-approved remote access procedure in accordance with Defense Information Systems

Agency; or (3) Physical access to multiple DoD facilities or multiple non-DoD federally controlled facilities on behalf of the DoD on a recurring basis for a period of 6 months or more. Contractor employees who meet these requirements shall be issued a CAC as explained at http://www.cac.mil/common-access-card/getting-your-cac/for-contractors/ . Contractor employees who do not meet the requirements for a CAC but are required to have access to a government installation shall be sponsored for an installation

Identification card by the contracting officers representative (COR) and provide all information to comply with adjudication standards and procedures using the National Crime Information Center Interstate identification Index (NCIC-III) and Terrorist Screening Database

(TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility and area commander agreements and other theater regulations. The contractor shall provide verification of contractor employee employment and that a valid security clearance is in place for each new and/or renewed CAC to the USG Trusted Agent Security Manager (TASM). Approximately every 6 months thereafter CAC issuance, the contractor shall provide continued employment and security status verification in response to a TASM request by completing, signing, and securely transmitting the requested reverification form to the TASM, ensuring that the employees PII is not exposed when transmitting the form.

9 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

C.3.10.2 Protection and Handling of Identification (ID) Cards and Reporting Lost or Stolen Cards. For CAC, refer to http://www.cac.mil/common-access-card/managing-your-cac/ . Installation identification or badge shall be displayed while on the installation on the front of the outer garment between the shoulder and waist. The contractor is responsible for ensuring all ID cards are properly safeguarded and accounted for at all times. The contractor shall immediately file an installation police report in cases of loss, theft, forgery, or damage.

C.3.10.3 Return of ID Cards. The Contractor shall ensure that all employees, including all subcontractor employees at all tiers, return installation and/or access badges in accordance with (IAW) FAR 52.204-9 to the Visitor Control Center for deactivation and destruction.

If a Contractor employees badge is not returned, the Contractor shall report, as soon as the incident is discovered, the unrecovered badge to the Installation Police. Contractor employees in possession of a CAC shall be responsible for turning in the CAC IAW FAR

52.204-9. All ID cards (installation or CAC) are property of the U.S. Government.

C.3.11 Antiterrorism (AT) Level 1 Training. All Contract employees conducting work on a DOD controlled installation, facility or area shall complete initial AT Level 1 training and annual training thru the life of the contract. AT level I awareness training is available at the following website: https://jkodirect.jten.mil/pdf/atl1/launch.html . All Contractors shall adhere to CDRL A025 training and reporting requirements training and have available upon request all certificates of completion for initial and annual reporting requirements. An alternative method is to conduct face-to-face training in a classroom or auditorium setting, using a sign-in or attendance sheets in lieu of certificates. The instructor will be Antiterrorism Level II certified and be an appointed Antiterrorism

Officer to perform this alternative training method.

C.3.12 iWatch Training. The Contractor shall use Government provided iWatch training for all contractor personnel supporting the contract who are operating on a DoD controlled installation, facility or area. This training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. All Contractors are required to adhere to CDRL A026 training and reporting requirements and have available upon request all certificates of completion for initial and annual reporting requirements. Training shall be obtained at: https://www.mepcom.army.mil/Home/contractors.aspx .

C.3.13 Covered Defense Information

C.3.13.1 Identify all covered defense information associated with the execution and performance of this contract. At the post-award conference, the Contractor and the Government/Program Office shall identify and affirm marking requirements for all covered defense information, as prescribed by DODI 5200.48, Controlled Unclassified Information (CUI), and DoDI 5230.24, Distribution Statements on

Technical Documents, to be provided to the Contractor, and/or to be developed by the contractor, associated with the execution and performance of this contract.

C.3.13.2 Track all covered defense information associated with the execution and performance of this contract. The Contractor shall document, maintain, and provide to the Government, a record of tier 1 level subcontractors, vendors, and/or suppliers who will receive or develop covered defense information as defined in DFARS Clause 252.204-7012, and associated with the execution and performance of this contract. The contractor shall report IAW CDRL A030, Contractors Record of Tier 1 Level Suppliers Receiving/Developing Covered

Defense Information.

C.3.13.3 Restrict unnecessary sharing and/or flow down of covered defense information associated with the execution and performance of this contract. The Contractor shall restrict unnecessary sharing and/or flow down of covered defense information as defined in DFARS

Clause 252.204-7012 and associated with the execution and performance of this contract in accordance with marking and dissemination requirements specified in the contract and based on a need-to-know to execute and perform the requirements of this contract.

C.3.13.4 The Contractor shall flow down the requirements in C.13.1 and C.13.2 to their tier 1 level subcontractors, vendors, and/or suppliers.

C.3.14 System Security Plan

C.3.14.1 The Contractor shall, upon request, provide to the government, a system security plan (or extract thereof) and any associated plans of action developed to satisfy the adequate security requirements of DFARS 252.204-7012, and in accordance with NIST Special

Publication (SP) 800-171, Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations in effect at the time the solicitation is issued or as authorized by the contracting officer, to describe the contractors unclassified information system(s)/network(s) where covered defense information associated with the execution and performance of this contract is processed, is stored, or transmits. The contractor shall report IAW CDRL A031.

C.3.14.2 The Contractor shall, upon request, provide the government with access to the system security plan(s) (or extracts thereof) and any associated plans of action for each of the Contractors tier one level subcontractor(s), vendor(s), and/or supplier(s), and the subcontractors tier one level subcontractor(s), vendor(s), and/or supplier(s), who process, store, or transmit covered defense information associated with the execution and performance of this contract. The contractor shall report IAW CDRL A031.

C.3.15 Threat Awareness Reporting Procedures (TARP).

Annual TARP training and reporting requirements are applicable to all Army contractors if included in the contract (Statement of Work

10 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

and or DD Form 254), this is applicable to all contract employees not just those contractor employees with security clearances. Per AR

381-12, Threat Awareness and Reporting Program (TARP), contractor employees must receive annual TARP training by a Counter Intelligence agent or other trainer as specified in AR 381-12, chapter 2 sections 2-4..

C.3.16 Access to Government Information Systems Requirements. All Contract employees with access to a government info system shall be registered in the ATCTS (Army Training Certification Tracking System) https://atc.us.army.mil/iastar/index.php . All Contract employees shall complete the DOD Information Assurance Awareness training prior to being granted access to the government information systems. This training is required to be completed annually for the duration of the contract. The minimum security investigative requirements for access to government information systems is Tier 1 formally known as National Agency Check with Inquiries (NACI) and

JPAS needs to reflect IT-III (Non-Privileged Access).

C.4 Contractor Commercial Drivers License (CDL). All Contractor employed civilians operating Fire Support Platforms FOVs shall have a

CDL per Army Regulation 60055 Section 2-2.

C.5 SPECIFIC REQUIREMENTS

As required by WD, the contractor shall perform engineering and technical activities to provide STS, SSTS, and PPSS services for the common Fire Support MEP utilized in the Stryker FSV FOVs. The specific types of technical services which may be defined, combined and executed under a WD are detailed in C.5.1 through C.5.29.

C.5.1 The contractor shall provide product improvements and support for Fire Support, Reconnaissance, and Surveillance target acquisition capabilities, aiding and improving target detection, identification, recognition, and destruction capabilities of the

Stryker FSV MEP.

C.5.2 The contractor shall conduct testing of vehicle targeting systems and associated MEP hardware and software.

C.5.3 The contractor shall provide onsite and remote Field Service Representative (FSR), engineering, and logistics support for

Government testing of vehicle systems to ensure that systems are properly configured and operational.

C.5.4 The contractor shall package and ship vehicle systems and the associated MEP components and developmental items to and from locations specified by the Government.

C.5.5 The contractor shall provide engineering, logistics, and FSR support for the design, development, troubleshooting, system disassembly and reassembly, integration, documentation, packaging, and shipping of vehicles, and associated system MEPs in support of demonstrations, exercises, system design and integration, test, fielding, and network and communication initiatives.

C.5.6 The contractor shall demonstrate system capabilities at Government and industry exercises, conferences, and demonstrations.

C.5.7 The contractor shall provide MEP system configuration management for software, operating systems, hardware, documentation, specifications, associated software code, system and subsystem component drawings and models, and the design, analyses, validation, test, logistics, and quality assurance of components and subsystems.

C.5.8 The contractor shall integrate individual technologies, to include the design, analysis, validation, test, logistics, quality assurance, fabrication and procurement of hardware and software into production and post-production baselines. Technologies include but are not limited to stabilized and elevated targeting, firing, and designation capability, increased situational awareness and threat detection and destruction capability.

C.5.9 The contractor shall provide administrative and management support for new design, development, technology implementation and integration, redesign of MEP components and systems, and all associated logistics, fielding, and troubleshooting.

C.5.10 The contractor shall provide administrative, programmatic, system configuration management, and engineering and integrated logistics support, to include planning, managing, and controlling system and software support activities, the Technical Data Package

(TDP), work proposal and Work Directive (WD) development activities, task statements detailing proposed work, documentation and drawings, computer software, cost estimates, logistics products and attending and participating in associated program reviews and meetings.

C.5.11 The contractor shall procure parts and spares required for system design, development, and integration of capabilities and improvements into Stryker FSV MEP systems and subsystems; the validation, test, and retrofit of vehicles and subsystems; and the completion and validation of Engineering Change Proposals (ECP), Engineering Change Orders (ECO), Modification Work Orders (MWO), and

Low Rate Initial Production (LRIP).

C.5.12 The contractor shall integrate networks and communications capabilities onto vehicle systems, ensure connectivity between networks and systems, and support Army Interoperability Certification (AIC) testing.

11 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

C.5.13 The contractor shall facilitate the network communications equipment and Communications Security (COMSEC) requirements for properly handling and communicating on Army networks in support of development, integration, production, retrofit, demonstration, and training efforts, IAW Attachment 0001, DD Form 254 Contract Security Classification Specification.

C.5.14 The contractor shall perform system level Information Assurance (IA) to protect systems and Mission Equipment Package(MEP) components from malicious code and threats.

C.5.15 The contractor shall identify, assess, and report Cyber Security (CS) threats to the MEP to the COR and provide recommended corrective action.

C.5.16 The contractor shall provide technical insertion, consisting of research, design, investigation, analysis, Human Factors

Engineering (HFE) and safety; concept evaluation, demonstration, integration, and testing of evolving technologies and improvements in the areas of reconnaissance, surveillance, target acquisition, target identification, detection, and recognition, and Counter-Unmanned

Aerial Systems (c-UAS) far-target location calculation and reporting; and self-location, accuracy, and Target Location Error (TLE) prediction.

C.5.17 The contractor shall interface with Army Command and Control (C2) systems to improve communication, detection and identification, tracking, and targeting capabilities.

C.5.18 The contractor shall prepare, as required by WD, and submit ECPs, ECOs, and Technical Data Packages (TDPs), IAW CDRL A005, and all computer software, IAW CDRLs A017 through A021, A028 and A029.

C.5.18.1 The contractor shall include its assertion of restrictions in its proposal submission for each ECP and include each of the following: other than commercial technical data, other than commercial computer software, commercial technical data, and commercial computer software. The contractor is permitted to revise its pre-award assertion of restrictions for commercial data only if such a revision would be permitted for comparable other than commercial technical data or other than commercial computer software pursuant to

DFARS 252.227-7013 or 252.227-7014 (i.e., based on new information).

C.5.19 The contractor shall prepare, submit, and install MWOs, entering and tracking the application of all MWOs into the Government

Modification Management Information System (MMIS). (CDRL A009)

C.5.20 The contractor shall provide logistics and engineering support in the development and integration of the TDP in the design, development, upgrade, and model changes of scientific and/or technical information necessary to translate system requirements into discrete engineering and logistical support documentation. Technical data includes, but is not limited to:

1) Technical Manuals (Maintenance, Troubleshooting, and Operator/Crew);

2) Technical and supply bulletins;

3) Transportability guidance technical manuals;

4) Maintenance expenditure limits and calibration procedures;

5) Repair Parts and Special Tools Lists (RPSTL);

6) Maintenance allocation charts;

7) Corrective maintenance instructions;

8) Preventive maintenance and Predictive maintenance instructions;

9) Drawings/specifications/technical data packages;

10) Computer software;

11) Software documentation;

12) Provisioning/Cataloging documentation;

13) Depot maintenance work requirements;

14) Identification lists;

15) Component lists;

16) Product support and source data;

17) Configuration Management; and

18) Hazardous material documentation.

C.5.21 The contractor shall prepare and submit Technical Manuals (TMs), and updates to TMs. (CDRLs A014 and A015)

C.5.21.1 The contractor shall provide source data in support of TM development and updates.

C.5.22 The contractor shall perform vehicle and MEP installation and upgrades, troubleshooting, maintenance test and repairs, onsite support, system training, procure parts as required, configure hardware and software, and ship and receive equipment and vehicle systems.

C.5.23 The contractor shall receive, update, maintain, use, and return facility vehicles as required.

C.5.24 The contractor shall perform inventory management and repair of Government Furnished Property (GFP) delivered to the contractor

12 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

in support of its performance under this contract.

C.5.25 The contractor shall prepare and conduct onsite, classroom level training, to include the creation and submission of training materials, vehicle systems, and support equipment. The contractor shall also prepare and provide remote training and support for the

Stryker FSV MEPs.

C.5.26 The contractor shall provide training, software and hardware version updates, manage system software revisions and software releases, deliver and install software to the field, and provide remote and onsite support for the Government MEP software Systems

Integration Lab (SIL), including shipping hardware and software to and from the SIL.

C.5.27 The contractor shall provide onsite engineering support and remote support via email and telephone for MEP and system problem investigations, troubleshooting, and problem resolution.

C.5.28 The contractor shall provide operator and maintenance training and field support of such training, including packaging and transportation of all required training materials to each site, onsite training, and follow-on training support.

C.5.29 The contractor shall track, study, predict, and mitigate MEP Line Replaceable Unit (LRU) and vehicle system obsolescence.

C.6 Start of Work Meeting. The contractor shall conduct a Post Award Start of Work meeting within 30 days after award of the first task order at the PMO SBCT facility in Warren, Michigan. The contractor shall coordinate a mutually acceptable meeting date with the COR within 14 days after contract award. The contractor shall prepare and submit a proposed agenda for the start of work meeting at least three business days before the scheduled meeting date. The contractor shall prepare and distribute meeting minutes (CDRL A003).

C.7 DELIVERABLES

C.7.1 Data deliverables, including Technical Data, are required contract deliverables, based on Work Directives to be added to the contract by task order for each ordering period. The contractor shall submit the deliverables as specified in each individual WD.

C.7.2 Contract Data Requirements List (CDRL). The contract deliverables are currently set forth in CDRLs A001 - A031, which are

Exhibits specified in Section J. All the data specified in this contract shall be delivered using the Governments CDRL Tool accessible at https://gcscdrl.army.mil/ext/ , unless otherwise specified in the CDRL(s). Within 10 calendar days after contract award, the contractor shall deliver the Government with a list of personnel requiring access to the CDEL Delivery Tool. Personnel are required to have either a Government-issued Common Access Card (CAC), Government-approved External Certificate Authority (ECA), or an Army Knowledge

Online (AKO) account in order to be provided access to the CDRL Delivery Tool. CDRL Delivery Tool user instructions and training will be provided at the Start of Work Meeting (SOWM). All contractor CDRL submissions shall be in the English language.

C.7.3 Deliverable Documentation as required by applicable WD.

C.7.3.1 The Contractor shall deliver Project Schedules, as required by WD, IAW CDRL A001.

C.7.3.2 The Contractor shall deliver Biweekly Status Reports, as required by WD, IAW CDRL A002.

C.7.3.3 The Contractor shall deliver Meeting Minutes, as required by WD, IAW CDRL A003.

C.7.3.4 The Contractor shall deliver Slide Presentations, as required by WD, IAW CDRL A004.

C.7.3.5 The Contractor shall deliver Engineering Change Proposals and Engineering Release Records, as required by WD, IAW CDRL A005.

C.7.3.6 The Contractor shall deliver Product Drawings and Models, and Associated Lists, as required by WD, IAW CDRL A006.

C.7.3.7 The Contractor shall deliver Test Inspection Reports, as required by WD, IAW CDRL A007.

C.7.3.8 The Contractor shall deliver Trip-Travel Reports, as required by WD, IAW CDRL A008.

C.7.3.9 The Contractor shall deliver Modified Work Orders, as required by WD, IAW CDRL A009.

C.7.3.10 The Contractor shall deliver Supplemental Data for Provisioning, as required by WD, IAW CDRL A010.

C.7.3.11 The Contractor shall deliver Technical Report Studies-Services, as required by WD, IAW CDRL A011.

C.7.3.12 The Contractor shall deliver Test Plans/Test Procedures, as required by WD, IAW CDRL A012.

C.7.3.13 The Contractor shall deliver Safety Assessment Reports, as required by WD, IAW CDRL A013.

C.7.3.14 The Contractor shall deliver Equipment Technical Manuals, as required by WD, IAW CDRL A014.

13 71

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

C.7.3.15 The Contractor shall deliver System Technical Manuals, as required by WD, IAW CDRL A015.

C.7.3.16 The Contractor shall deliver As Built Configuration Lists, as required by WD, IAW CDRL A016.

C.7.3.17 The Contractor shall deliver Interface Control Documents, as required by WD, IAW CDRL A017.

C.7.3.18 The Contractor shall deliver Interface Design Descriptions, as required by WD, IAW CDRL A018.

C.7.3.19 The Contractor shall deliver Software Resources Data Reporting, as required by WD, IAW CDRL A019.

C.7.3.20 The Contractor shall deliver Interface Requirements Specifications, as required by WD, IAW CDRL A020.

C.7.3.21 The Contractor shall deliver…