Question and Answers Roll-Off Dump Truck W564KV-21-Q-0026.pdf

Question and Answers - W56KV-21-Q-0026 -Roll-Off Dump Truck - 17 May 2021

Truck

• Are you looking for a 4x4 truck with 2 axles, a 6x4 with 3 axles or a 6x6 with 3 axles?

ANSWER: 6x4 with 3 axles

• 4x4 with 3 axles is not available

ANSWER: Please see point 1

• Do you need a differential lock on the front axle ? This is only available with 4x4 or 6x6, not with 6x4

ANSWER: No

• With wide bed rims size 10.00W-2O and a later to be mounted crane the maximum allowed height of 4.00m for the truck might be exceeded. Are those wide bed rims a must ?

ANSWER: No

Crane standard side tipper

• Are you looking for a two-way tipper to roll-off from the Roll-off unit (Hookloader) prepared to mount a crane at a later stage (Picture 1) or are you looking for a roll-off platform with side walls and crane prep (Picture 2)?

ANSWER: Nothing from both, we are looking for a Container-Roll-off Truck, Picture 1, with the possibility to transport later Equipment shown on Picture 2

• What type/kind of crane and size of crane are you planning to mount at a later stage ?

ANSWER: Similar to PALFINGER 9.9 Meter Triple extension

• Crane position: Do you want the crane to be mounted at the front or at the back of the platform/ tipper ?

ANSWER: On the front from the Roll-Off Container

• What is your preferred height for the front and back wall of the roll-off platform/tipper ?

The same as for the side walls (550 – 600mm) ?

ANSWER: We require a Roll-Off Container with the measurements 6500x2420x800mm

• What do you mean by „Stimulus height 800 up to 850mm“ ?

ANSWER: Height of the Roll-Off Container

• Is 4100 up to 4200 mm your preferred length for the whole roll-off unit including crane or is it you preferred inside length for the loading area only ?

ANSWER: We require the measurements 6500x2420x800mm for loading