RFQ_W564KV-18-Q-0066_Gym_Equip_Rumania_Bulgaria.pdf

SEE ADDENDUM

(No Collect Calls)

W564KV18Q0066 31-Aug-2018

b. TELEPHONE NUMBER

06111435426891

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 10 Sep 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W564KV9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JAMES ARTHUR

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

TCC-KAISERSLAUTERN

KLEBER KASERNE MANNHEIMER STRASSE 238

BLDG 3233

67657 KAISERSLAUTERN

GERMANY

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE WK4UT1 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

0021 CS HHC TDA

0021 CS HHC TDA

MANNHEIMER STRASSE

PANZER KASERNE BLDG 3014

67657 KAISERSLAUTERN

GERMANY

TEL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339920

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF101

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 1449 - CONTINUATION SHEET

DELIVERY LOCATIONS

DELIVERY REQUIREMENT / LOCATIONS

No partial shipment are permitted unless specifically authorized at the time of award.

Equipment shall be delivered, installed and serviced at the following location:

Delivery / Ship to Address to MK Romania Air Base:

Civilian: US Army Black Sea Area SP SSA Michail Kogalniceanu Airbase PFOS DN2A, Tudor Vladimirescu Street no.8, Constanta, Romania Zip Code 907195

Delivery / Ship to Address to NSTA Bulgaria:

Military: W6N0 CS ELE USA MIS JTF-BU, JOINT TASK FORCE EAST, NOVO SELO TRAINING AREA

BLDG 7000, MOKREN BURGAS BG 8994

APO, AE 09753

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Gym Equipment, Romania

FFP

MK Air Base Gym Equipment

IAW the Salient Characteristics Shall Meet Warranty Requirements in ADDENDUM FAR 52.212-4

See Price Exhibit A

FOB: Destination

NET AMT

0002 1 Each Shipping and Installation, Romania

FFP

Delivery / Ship to Address to MK Air Base, Romania:

Military: US Army Black Sea Area SP SSA Michail Kogalniceanu Airbase PFOS DN2A, Tudor Vladimirescu Street no.8, Constanta, Romania Zip Code 907195

0003 1 Job Gym Equipment, Bulgaria

FFP

NSTA Gym Equipment

IAW the Salient Characteristics Shall Meet Warranty Requirements in ADDENDUM FAR 52.212-4

See Price Exhibit B

0004 1 Each Shipping and Installation, Bulgaria

FFP

Delivery / Ship to Address to NSTA Bulgaria:

Military: W6N0 CS ELE USA MIS JTF-BU, JOINT TASK FORCE EAST, NOVO SELO TRAINING AREA

BLDG 7000, MOKREN BURGAS BG 8994

APO, AE 09753

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 N/A N/A N/A Government 0004 N/A N/A N/A Government

SALIENT CHARACTERISTICS

SALIENT CHARACTERISTICS MK ROMANIA GYM EQUIPMENT

1. LifeFitness - Integrity DX Treadmill Life Fitness Integrity DX Treadmill, model INTDX-ALLXX, or equal (see FAR 52.211-6) with the following minimum features and specifications:

Console 7 in LCD Touch screen with touch and tactile buttons/controls

USB charging port

Device holder/reading rack

Language: English as a minimum

Display Specifications Time, Incline, Speed, Distance, • Heart Rate, Calories • Expanded Display Metrics: Time Elapsed, Distance Climbed, Cal/Hr., METs, Watts, Avg HR, Max HR, Time in Zone, Avg Speed Workouts: Manual and Quick Start, Hill, Random; Time Goal, Distance Goal, Calories Goal, Heart Rate Goal, Rolling Hills, Speed Interval • Incline Interval

LifePulse Digital Heart Rate Monitoring with DSP (Digital Signal Processing) Workouts

Workout Performance History Digital Solutions

Speed Range: 0.5-14 mph (0.8-23 kph)

Incline 0% - 15%

Motor System 4 HP AC peak performance motor (comparable with Life Fitness Integrity DX Treadmill motor system)

Remote speed and incline controls

Side handrails 24" (61 cm) minimum

2 Removable locking cup holders

Integrated accessory tray Frame

Cast aluminum lower side rails and end caps

Front wheels for easy mobility

Adjustment levelers for product stability

Quick- release removable shroud for simple serviceability

Robust paint (corrosion, stain, and chemical-resistant coating)

Titanium Storm frame Technical Specifications

Running surface: 22 x 60" (56 x 152 cm) minimum

Stepup height: 8" (20 cm) minimum

As a minimum must handle a max user weight of 400 lbs. (181 kg)

Length: 82" (209cm) minimum

Width: 36" (92 cm) minimum

Height: 56" (142 cm) minimum

Power Requirements 230 volts, 10A outlet (country dependent) with dedicated line, neutral, ground wires and dedicated circuit breaker for each treadmill.

2. LifeFitness - Integrity DX Elliptical

Life Fitness Integrity DX Elliptical, model INXDX-ALLXX or equal (see FAR 52.211-6) with the

Display: Telemetry and Heart Rate,Time, Speed, Distance, resistance, Heart Rate, Calories, time elapsed, Cal/Hr., METs, watts,average HR, max HR, time in zone, average pace, average speed; Workouts: Time Set, Calories Set Distance Set, Heart Rate Set, Random, Hill, Manual, Rolling Hills, Resistance Interval, Fit Test, Reverse

Oversized non-slip pedals to enhance comfort

Versatile/moving mutli-grip handles with integrated/remote resistance controls

Hill, Random • Time Goal, Distance Goal, Calories Goal, Heart Rate Goal, Rolling Hills, Speed Interval; Incline Interval

Minimum Space between foot pedals: 3 in (7.6 cm)

Step-up Height: More than 9.5in (24cm)

As a minimum must handle a max user weight of 400 lbs. (181 kg)

Resistance levels: 25 minimum

Transport wheels

Water bottle holder /accessory tray: Reading rack and one cup holder w/removable anti-theft locking feature

Self-powered

Power Requirements: 230V, 10A outlet (country dependent) with dedicated line, neutral, ground wires and dedicated circuit breaker.

3. LifeFitness - Integrity DX Recumbent Bike Life Fitness Integrity DX Recumbent Bike, model INRDX-ALLXX, or equal (see FAR 52.211-6) with the following minimum features and specifications:

Name Technical specification:

Display: (English as a minimum) Readouts: Speed, Distance, Distance Climbed, Average Pace, Average Speed, Total Cal Burned, Average METs, Average Watts, Average HR, Max HR, RPM;

Workouts: Time, Distance, Calorie, Heart Rate, Random, Hill, Manual, Rolling Hills, Speed Interval, Fitness Tests, Resistance Interval, Reverse, METS, Watts

USB port for software updates and device charging

Heart Rate Monitoring with DSP (Digital Signal Processing)

Hill, Random • Time Goal, Distance Goal, Calories Goal, Heart Rate Goal, Rolling Hills, Speed Interval; Incline Interval

Dimensions (est): 41.5in x 24.5in x 54.5in (105cm x 62cm x 138cm)

Step over height: More than 21in (54cm)

User height range: 4'9" - 6'5" (144cm - 195cm)

As a minimum must handle a max user weight of 400 lbs. (181 kg)

Transport wheels

Generator Drive System with 8-Ribbed Poly-V Belt resistance system for a smooth, quiet operation and limited maintenance

Belt drive: Single stage drive with self-tensioning idlers for minimal mechanical drag and low maintenance; Resistance type: Hybrid Eddy current brake with brushless internal generator for low drag and high power capability

25 resistance levels

Telemetry capable

Self-powered

Power International: 230V, 10A outlet with dedicated line, neutral, ground wires and dedicated circuit breaker

Seat, Handlebars, Pedals • Adjustable Ergonomic Racing Handlebars with elbow support, capable of supporting three different exercise positions cruising, hybrid and race positions

Adjustable Ergonomic Unisex padded seat

Handlebar and seat adjustments: vertical and horizontal

Interchangeable seat and pedals

Self- leveling wide pedals with simple buckle straps to allow exerciser to get on and go

Integrated accessory tray and water bottle holder

4. LifeFitness - Integrity DX Upright Bike

Life Fitness Integrity DX Upright Bike, model INCDX-ALLXX, or equal (see FAR 52.211-6) with the

Display: (English as a minimum) Readouts: Speed, Distance, Distance Climbed, Average Pace, Average Speed, Total Cal Burned, Average METs, Average Watts, Average HR, Max HR, RPM;

Workouts: Time, Distance, Calorie, Heart Rate, Random, Hill, Manual, Rolling Hills, Speed Interval, Fitness Tests, Resistance Interval, Reverse, METS, Watts

USB port for software updates and device charging

Hill, Random; Time Goal, Distance Goal, Calories Goal, Heart Rate Goal, Rolling Hills, Speed Interval; Incline Interval

Dimensions (est): 41.5in x 24.5in x 54.5in (105cm x 62cm x 138cm)

Step over height: More than 21in (54cm)

User height range: 4'9" - 6'5" (144cm - 195cm)

As a minimum must handle a max user weight of 400 lbs. (181 kg)

Transport wheels

Generator Drive System with 8-Ribbed Poly-V Belt resistance system for a smooth, quiet operation and limited maintenance

Belt drive: Single stage drive with self-tensioning idlers for minimal mechanical drag and low maintenance; Resistance type: Hybrid Eddy current brake with brushless internal generator for low drag and high power capability

25 resistance levels

Telemetry capable

Self-powered

Power International: 230V, 10A outlet with dedicated line, neutral, ground wires and dedicated circuit breaker

Seat, Handlebars, Pedals •

Adjustable Ergonomic Racing Handlebars with elbow support, capable of supporting three different exercise positions cruising, hybrid and race positions

Adjustable Ergonomic Unisex padded seat

Handlebar and seat adjustments: vertical and horizontal

Interchangeable seat and pedals

Self- leveling wide pedals with simple buckle straps to allow exerciser to get on and go

Integrated accessory tray and water bottle holder

5. LifeFitness - PowerMill Elevation Series

LifeFitness Elevation Series model PowerMill Climber 95PXP-DOMXX-02 or equal (see FAR 52.211-6) with the following minimum features and specifications:

Flash Programmable with USB:

Manager Menu Options:

Cup Holders: 2 Integrated Accessory Tray Pedals: Wide Non-Slip Two-Tone Stair/Riser Plug In Accessory No Resistance levels 25 Support Handlebars Compatible Devices: Android; iOS 4.3 & above Easy To Remove Headphone Jack Integrated Reading Rack On the Fly Programming Welded Steel Frame, Front Roller Lift Wheels and Rear Levelers Wheels: 4 Wheels for Easy Mobility and Positioning Dimensions: (L x W x H)55.92 in x 32.81 in x 82.3 in (143 cm x 84 cm x 210 cm) Weight: 473 lb. (215 kg) 3.5mm Headphone Jack:

Max User Weight:400 lb. (182 kg) Step Up Height: 10.5 in (27 cm) Power Requirements:100-240 volts, 50/60 HZ, 3 Amps

6. LifeFitness - Signature Series- Adjustable Decline/Abdominal Bench

Life Fitness Signature Series Adjustable Decline/Abdominal Bench, model SADB or equal (see FAR

Dimensions (L x W x H) 64 in x 29 in x 32 in (163 cm x 74 cm x 82 cm) Color: Titanium/Black.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Urethane paint guards to protect paint Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

7. LifeFitness Signature Series - Arm Curl Bench

Life Fitness Signature Series Arm Curl Bench, model SAC or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 33 in x 47 in x 46 in (84 cm x 120 cm x 117 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

8. Life Fitness Signature Series - Barbell Rack Life Fitness Signature Series Barbell Rack, model SBBR or equal (see FAR 52.211-6) with the following minimum features and specifications:

Dimensions (L x W x H) 38 in x 33 in x 60 in (97 cm x 84 cm x 153 cm) Color: Titanium.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

9. LifeFitness Signature Series - Chin/Dip/Leg Raise

Life Fitness Signature Series Chin/Dip/Leg Raise, model SCDLR or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 45 in x 50 in x 91.5 in (115 cm x 127 cm x 233 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

10. LifeFitness Signature Series- Two Tier Dumbbell Rack

Life Fitness Signature Series Two Tier Dumbbell Rack, model SDR2 or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 90 in x 25 in x 33 in (229 cm x 64 cm x 84 cm)

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

11. LifeFitness Signature Series - Multi Adjustable Bench

Life Fitness Signature Series Multi Adjustable Bench, model SMAB or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 53 in x 32 in x 17.5 in (135 cm x 82 cm x 45 cm) Color: Titanium/Black Adjustments: Yes.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

12. LifeFitness - Signature Series Multi Jungle - MJ5

LifeFitness Signature Series MJ5 Multi Jungle or equal (see FAR 52.211-6) with the following minimum features and specifications:

Multi-Jungle Core Tower (MJCORE) With: MJ Handle Accessory Pack (MJHAR), MJ Lat Pulldown

(MJLP), MJ Row (MJRW), MJ Adjustable Crossover w/Outrigger Stack (MJACO), and MJ Triceps Pushdown (MJTP).

Multi-Jungle Core Tower: (MJCORE) Dimensions: (L x W x H) 32.5 in x 32.5 in x 94 in (83 cm x 83 cm x 239 cm) Weight: 225 lb. (103 kg)

MJ Handle Accessory Pack: (MJHAR) Dimensions: (L x W x H) 27 in x 8.5 in x 28 in (69 cm x 22 cm x 72 cm), Weight: 31 lb. (15 kg)

MJ Lat Pulldown: (MJLP) Dimensions: (L x W x H) 26.75 in x 37.25 in x 92 in (68 cm x 95 cm x 234 cm), Weight: 340 lb. (155 kg), Weight Stack Weight in kgs: 130 kg, Weight Stack Weight in lbs.: 260 lbs., MJ Row: (MJRW) Dimensions: (L x W x H) 26.75 in x 37.25 in x 92 in (68 cm x 95 cm x 234 cm), Weight: 360 lb. (164 kg), Weight Stack Weight in kgs: 130 kg Weight Stack Weight in lbs.: 260 lbs.

MJ Adjustable Crossover w/Outrigger Stack: (MJACO) Dimensions: (L x W x H) 28.5 in x 142 in x 94 in (73 cm x 361 cm x 239 cm), Weight: 720 lb. (327 kg, Weight Stack Weight in kgs: 95 kg Weight Stack Weight in lbs.: 190 lb.

MJ Triceps Pushdown: (MJTP) Dimensions: (L x W x H) 4.5 in x 21.25 in x 92 in (12 cm x 54 cm x 234 cm), Weight: 225 lbs. (103 kgs), Weight Stack Weight in kgs: 95 kgs Weight Stack Weight in lbs.:

225 lbs.

Color: Titanium Frame & Black Upholstery.

13. LifeFitness - Signature Series Dual Adjustable Pulley

Life Fitness Signature Series Dual Adjustable Pulley, model CMDAP, or equal (see FAR 52.211-6) with

Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use. Hand grips are a durable urethane composite.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Shrouds: Standard rear shrouds or Optional front shrouds.

Weight Plates and Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss.

Dimensions (L x W x H): 44 in x 62 in x 95 in (112 cm x 158 cm x 242 cm) Weight: 1,265 lb. (574 kg), Weight Stack Weight in kgs: 195, Weight Stack Weight in lbs.: 390.

14. LifeFitness Signature Series - Olympic Decline Bench

Life Fitness Signature Olympic Decline Bench, model SODB or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 51 in x 68 in x 51 in (130 cm x 173 cm x 130 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

15. LifeFitness Signature Series - Olympic Flat Bench

Life Fitness Signature Series Olympic Flat Bench, model SOFB or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 51 in x 49 in x 51 in (130 cm x 125 cm x 130 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

16. LifeFitness Signature Series - Olympic Incline Bench Life Fitness Signature Series Olympic Incline Bench, model SOIB or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 51 in x 58 in x 57 in (130 cm x 148 cm x 145 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

17. LifeFitness Signature Series - Olympic Military Bench

Life Fitness Signature Series Olympic Military Bench, model SOMB or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 51 in x 48 in x 66 in (130 cm x 122 cm x 168 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

18. LifeFitness Signature Series - Olympic Squat Rack

Life Fitness Signature Series Olympic Squat Rack, model SOSR or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 66 in x 77.5 in x 75.5 in (168 cm x 197 cm x 192 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

19. LifeFitness Signature Series - Olympic Bench Weight Storage Rack Life Fitness Signature Series Olympic Bench Weight Storage Rack, model SOBWS or equal (see FAR

Dimensions (L x W x H) 17 in x 28 in x 49 in (44 cm x 72 cm x 125 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

20. LifeFitness Signature Series - Olympic Weight Tree Storage

Life Fitness Signature Series Olympic Weight Tree Storage, model SOWT or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 23 in x 27 in x 37 in (59 cm x 69 cm x 94 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

21. LifeFitness Signature Series - Utility Bench

Life Fitness Signature Series Utility Bench, model SUB or equal (see FAR 52.211-6) with the following

Dimensions (L x W x H) 28 in x 36 in x 36 in (72 cm x 92 cm x 92 cm)

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

22. LifeFitness Signature Series - Plate Loaded Calf Raise Life Fitness Signature Series Plate Loaded Calf Raise, model SPLCALF or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 61 in x 29 in x 42 in (155 cm x 74 cm x 107 cm)

Plate Capacity: 4-45 lb (3-25 kg) plates per weight rod.

Starting Resistance: 95 lbs (43 kg).

Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

Hand Grips: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

23. LifeFitness Signature Series - Plate Loaded Decline Chest Press

Life Fitness Signature Series Plate Loaded Decline Chest Press, model SPLDCP or equal (see FAR

Dimensions (L x W x H) 51 in x 69 in x 76 in (130 cm x 176 cm x 194 cm)

Plate Capacity: 5-45 lb (4-25 kg) plates per weight rod.

Standard Weight Horns: 6.

Starting Resistance: 6 lbs (3 kg) per workarm.

Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

24. LifeFitness Signature Series - Plate Loaded High Row

Life Fitness Signature Series Plate Loaded High Row, model SPLHR or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 73 in x 66 in x 76 in (186 cm x 168 cm x 194 cm)

Plate Capacity: 5-45 lb (4-25 kg) plates per weight rod.

Standard Weight Horns: 4.

Starting Resistance: 3 lbs (1 kg).

Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Urethane paint guards to protect paint. Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use. Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

25. LifeFitness Signature Series - Plate Loaded Incline Chest Press

Life Fitness Signature Series Plate Loaded Incline Chest Press, model SPLIP or equal (see FAR

Dimensions (L x W x H) 50 in x 62 in x 75 in (127 cm x 158 cm x 191 cm)

Plate Capacity: 5-45 lb (4-25 kg) plates per weight rod.

Standard Weight Horns: 4.

Starting Resistance: 3 lbs (1 kg).

Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Urethane paint guards to protect paint. Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use. Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

26. LifeFitness Signature Series - Plate Loaded Linear Leg Press

Life Fitness Signature Series Plate Loaded Linear Leg Press, model SPLLLP or equal (see FAR

Dimensions (L x W x H) 98 in x 61 in x 61 in (249 cm x 155 cm x 155 cm)

Plate Capacity: 8-45 lb (7-25 kg) plates per weight rod.

Standard Weight Horns: 4.

Starting Resistance: 103 lbs (47 kg).

Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Urethane paint guards to protect paint. Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use. Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

27. LifeFitness Signature Series - Plate Loaded Row

Life Fitness Signature Series Plate Loaded Row, model SPLROW or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 55 in x 57 in x 54 in (140 cm x 145 cm x 138 cm)

Plate Capacity: 5-45 lb (4-25 kg) plates per weight rod.

Standard Weight Horns: 4.

Starting Resistance: 12 lbs (5 kg) per workarm.

Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Urethane paint guards to protect paint. Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use. Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

28. LifeFitness Signature Series - Plate Loaded Shoulder Press

Life Fitness Signature Series Plate Shoulder Press, model SPLSP or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 61 in x 66 in x 53 in (155 cm x 168 cm x 135 cm)

4-45 lb (3-25 kg) plates per weight rod.

Standard Weight Horns: 2.

Starting Resistance: 10 lbs (4.5 kg) per workarm Adjustments: Spring assist to (where applicable) improve ease of use on adjustments.

Cushioning: Contoured cushions utilize a molded foam for superior comfort and durability. Pads have plastic backers to protect and increase durability.

Frame Description: 11-gauge steel frame ensures maximum structural integrity. Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability. Urethane paint guards to protect paint. Standard rubber feet protect base of the frame and prevent the machine from slipping.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use. Hand

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained.

29. Cybex - T-Bar Row Cybex T-bar Row, model 16280 or equal (see FAR 52.211-6) with the following minimum features and specifications:

Dimensions (L x W x H) 80" x 30" x 28" 203 cm x 76 cm x 71 cm Machine Weight: 172 lbs, 78 kg.

Color: Black.

Dual handgrips

30. Hammer Strength Select Shoulder Press

Hammer Strength Select Chest Press, model HS-CP or equal (see FAR 52.211-6) with the following

Dimensions (L x W x H) 41 in x 57 in x 64 in (105 cm x 145 cm x 163 cm)

Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system. Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity. Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

31. Hammer Strength Select Chest Press

Hammer Strength Select Chest Press, model HS-CP or equal (see FAR 52.211-6) with the following

Dimensions (L x W x H) 41 in x 57 in x 64 in (105 cm x 145 cm x 163 cm)

Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

32. Hammer Strength Select Pectoral Fly/Rear Deltoid

Hammer Strength Select Pectoral Fly/Rear Deltoid, model HS-FLY or equal (see FAR 52.211-6) with

Dimensions (L x W x H) 49 in x 56 in x 71 in (125 cm x 143 cm x 181 cm) Color: Titanium/Black. Cables: 7x19 strand construction, lubricated, nylon-coated cable meets

U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Cushioning: Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

33. Hammer Strength Select Lat Pulldown

Hammer Strength Select Lat Pulldown, model HS-PD or equal (see FAR 52.211-6) with the following

Dimensions (L x W x H) 54 in x 33 in x 89 in (138 cm x 84 cm x 227 cm)

Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; All edges are stitched to

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

34. Hammer Strength Select Biceps Curl

Hammer Strength Select Biceps Curl, model HS-BC or equal (see FAR 52.211-6) with the following

Dimensions (L x W x H) 45 in x 41 in x 55 in (115 cm x 105 cm x 140 cm)

Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

35. Hammer Strength Select Triceps Extension

Hammer Strength Select Triceps Extension, model HS-TE or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 45 in x 44 in x 55 in (115 cm x 112 cm x 140 cm)

U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; All edges are stitched to

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

36. Hammer Strength Select Seated Leg Press

Hammer Strength Select Seated Leg Press, model HS-SLP or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 79 in x 40 in x 71 in (201 cm x 102 cm x 181 cm)

U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

37. Hammer Strength Select Leg Extension

Hammer Strength Select Leg Extension, model HS-LE or equal (see FAR 52.211-6) with the following

Dimensions (L x W x H) 47 in x 41 in x 64 in (120 cm x 105 cm x 163 cm)

U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature

Cushioning: Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

38. Hammer Strength Select Leg Curl

Hammer Strength Select Leg Curl, model HS-LC or equal (see FAR 52.211-6) with the following minimum

Dimensions (L x W x H) 65 in x 39 in x 55 in (166 cm x 100 cm x 140 cm)

U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings. 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss. Drop down incremental weight system.

Adjustments: Roller mechanism on seat adjustment provides smooth operation.

Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity.

Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant.

39. Hammer Strength Select Dip/Chin/Assist

Hammer Strength Select Back Extension, model HS-ADC or equal (see FAR 52.211-6) with the

Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature

Cushioning Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Foot Platforms Polyethylene spray-coated for impact, corrosion, and abrasion resistance.

Frame Description: Standard rubber feet protect base of the frame and prevent the machine from slipping, 11-gauge steel frame ensures maximum structural integrity; each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability.

40. Hammer Strength Select Hip Abduction

Hammer Strength Select Hip Abduction, model HS-HAB or equal (see FAR 52.211-6) with the

Dimensions (L x W x H) 61 in x 26 in x 55 in (155 cm x 67 cm x 140 cm)

U.S. military specifications.

Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained. Axis of rotation marked with red indicator to help cue correct alignment.

Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings.

Cushioning: Pads are molded with radius on edge for improved comfort; all edges are stitched to eliminate any folds in the material that would limit durability.

Weight Plates And Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self- lubricating bushings.