Attachment_0001_W52P1J19Q0002_Product_Description_.docx

ATTACHMENT 0001: PRICING MATRIX & PRODUCT DESCRIPTIONS

PRICING MATRIX:

***Please fill out the unit price and total CLIN price. The total price should including opton CLIN’s***

CLIN 0001 & 0004:

Anti-Fatigue Mat is an effort to provide reasonable accommodation for the First Army Commanding General's health and welfare initiative. Must meet the following salient characteristics:

· High Density Foam (HDF) interior

· Beveled Edge

· Flame Resistant

· Washable

· Puncture Resistant

· Mat Length 36"

· Mat Thickness 0.50"

· Mat Width 24"

CLIN 0002 & 0003:

Standing Desk sized to accommodate for dual-monitor and extra gear setups or large workspace needs. Must meet the following salient characteristics:

· Arrives fully assembled.

· Compact Footprint, that will fit onto a 24" deep desk surface

· Able to be placed on top of existing desk, sturdy and stable at any height

· Gas, spring, hydraulic, or other mechanical assist of the height adjustment feature

· Users can switch from a sitting to a standing position in several seconds, with ease

· After height adjustment, the user can easily, securely lock the surface at their chosen height.

· Primary work surface extends a minimum of 13.8" height, not to exceed 20” fully extended.

· Can be set at multiple height settings within the height range; at least 10 different settings (or approximately every 2 ¼”) over the range is the minimum.

· Must be capable – as a minimum - of holding up to 35 lbs.

· Will accommodate two (2) 24" monitors

· Ergonomic keyboard tilt - a minimum of 20 degrees of keyboard tilt, full range.

· Keyboard and the Primary surfaces both height-adjust together

· Weight: Approximate weigh of 40 pounds or less

· Product Warranty: Two years covered by vendor for materials and workmanship.

· Utilizes grommets or other features for wire/cable management.

· Easily installed, retrofitting to the existing working surfaces. The unit shall not require any drilling into existing furniture for anchoring purposes

· Acceptable colors and finishes. Supporting mechanical parts and components are to be of a similar color. The specific color should conform to the contemporary décor of a modern office area. The customer’s office settings are conducive to the colors of black, mid and dark greys, mid and dark greens, and some tan hues. Working surface shall be a laminate or equal material. A dark, imitation wood grain is also acceptable for the working surface.