Commercial_Addendum_-_W52P1J-16-T-3021.doc

ADDENDUM TO W52P1J-16-T-3021

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection of Supplies – Fixed-Price

AUG 1996

52.204-7 System for Award Management

JUL 2013

52.204-13 System for Award Management Maintenance

JUL 2013

52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving

AUG 2011

52.225-13 Restrictions on Certain Foreign Purchases

JUN 2008

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran – Representation and Certifications

DEC 2012

52.232-39 Unenforceability of Unauthorized Obligations

JUN 2013

52.233-2 Protest after Award

SEP 2006

52.233-4 Applicable Law for Breach of Contract Claim

OCT 2004

52.244-6 Subcontracts for Commercial Items

CLAUSES INCORPORATED BY FULL TEXT

1. 52.0000-4000 02 Non-Release of Contract Information (MAR 2000)

1. Any proprietary, confidential commercial, trade secret or similar type of information in the contract resulting from this solicitation may not be released to anyone outside the Government.

2. Do not release proprietary, confidential commercial, trade secret or similar type of information from this contract to anyone inside the Government that does not have a legitimate need to know the information.

3. If in doubt about what information in the contract may be released, contact the Contracting Officer.

4. Criminal penalties are provided by 18 U.S.C. for the improper release of proprietary and/or confidential commercial information.

2. 52.211-8 Time of Delivery (JUN 1997)

a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR’S PROPOSED DELIVERY SCHEDULE

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding

(1) five calendar days for delivery of the award through the ordinary mails, or

(2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of Clause)

3. 52.0000-4000 03 Electronic Award Notice (SEP 2005).

Any contract awarded as a result of this solicitation will be posted to the Army Single Face to Industry (ASFI)under Procurement Notification; the Federal Business Opportunities (FedBizOps); and/or the Electronic Document Access (EDA) Websites (see addresses below). Paper copies will not be distributed. This is a material condition of the solicitation and by submission of a bid or proposal, the vendor agrees to accept notification of an electronic award transmitted in the manner described above.

Notice of award to the awardee will be issued only via electronic mail. Vendors who wish to be notified if they receive an award as a result of this solicitation must provide their electronic mail address in the space provided below. If the vendor fails to provide an electronic mail address, then a separate notice of award will not be provided and it shall be the sole responsibility of the vendor to periodically check the Army Single Face To Industry (ASFI) web site https://acquisition.army.mil/asfi/ and/or the Federal Business Opportunities (FedBizOpps) web site http://www.fbo.gov/ and/or the Electronic Document Access (EDA) web site http://eda.ogden.disa.mil/ to determine if he/she has received an award. In this event, the vendor's failure to check any of the three web sites mentioned above in a timely manner shall not be an excuse for failure to perform or grounds for a delivery schedule extension.

Notice of award to unsuccessful offerors shall be issued only via electronic mail from the Contracting Office and/or the FedBizOpps/Vendor Notification and/or ASFI/Procurement Notifications features. Vendors who wish to receive an electronic mail notice if they are unsuccessful must provide an electronic mail address in the space provided below. If the vendor fails to provide an electronic mail address, then a separate notice will not be provided, and it shall be the sole responsibility of the vendor to periodically check the FedBizOpps/Vendor Notification or the ASFI/Procurement Notifications to determine if an award has been made. In this event, the vendor's failure to check these sites to determine if an award has been made shall not constitute grounds for an extension of the ten (10) day protest period allowed by regulation.

VENDOR'S ELECTRONIC MAIL (E-MAIL) ADDRESS: _________________________________________

NOTE: For EDA registration guidance and information please go to http://eda.ogden.disa.mil. The registration process will accommodate Contractor and Government users. For FedBizOpps registration guidance and information please go to http://www.fedbizopps.gov and for registration guidance and information for ASFI go to https://acquisition.army.mil/asfi/

4. 52.0000-4000 04 ASFI Notice (SEP 2005).

Contractors are requested to use ASFI to view solicitations and amendments. To view the Rock Island Contracting Center’s solicitations/amendments go to https://acquisition.army.mil/asfi/ and click on the link Contracting Opportunities Search. Under the title Select Contracting Office type in a W52P1J%. Click the Continue Button at the bottom of the screen. The next page will give a listing of all open solicitations/amendments for Rock Island Contracting Center. Please contact the contract specialist listed on the solicitation/amendment for instructions with your bid response. You can also bid electronically using the ASFI bid response module. For guidance and information of the electronic bidding response system please go to https://acquisition.army.mil/asfi/ and click on the link ASFI FAQ Page.

5. 52.0000-4001Clauses/Solicitation Provisions Incorporated By Reference (APR 2004).

This solicitation incorporates one or more clauses and/or solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at these addresses:

http://farsite.hill.af.mil/ ; http://www.arnet.gov/far/ ; http://akss.dau.mil/jsp/default.jsp;

6. 52.0000-4002 Shipping/Delivery Instructions and Information (FEB 2004)

1. THE COMPLETE 13-DIGIT PURCHASE ORDER, DELIVERY ORDER, OR CONTRACT NUMBER (The Number that starts with W52P1J----) MUST BE ON THE OUTSIDE OF THE SHIPPING CONTAINER. This number must also appear on all packing slips, invoices, bills, or any communications regarding this order.

2. A Packing List must be included with each shipment.

3. Any excess quantity delivered, that is not covered by a Variation in Quantity clause, is subject to rejection.

4. SHIPMENT OR DELIVERY TO ANY ADDRESS OTHER THAN THE “SHIP TO” ADDRESS

DESIGNATED IN THE PURCHASE ORDER/DELIVERY ORDER/CONTRACT (Block 14 of the DD1155, Block 15 of the SF1449, or Block 11 of the SF 26) MAY RESULT IN A DELAY IN PAYMENT.

5. ANY CHANGE IN THE “SHIP TO” ADDRESS MUST BE APPROVED BY A WRITTEN CONTRACT MODIFICATION FROM THE CONTRACTING OFFICER.

6. Information from FAR clause 52.232-25, Prompt Payment (FEB 2002), Paragraph (a)(5)(i): For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

7. 52.0000-4003 Disclosure of Unit Price Information (AUG 2005).

This constitutes notification pursuant to Executive Order 12600, Pre-Disclosure Notification Procedures for Confidential Commercial Information (June 23,1987), of our intention to release unit prices of the awardee in response to any request under the Freedom of Information Act, 5 USC 552. Unit price is defined as the contract price per unit or item purchased. We consider any objection to be waived unless the Contracting Officer is notified of your objection to such release prior to submission of initial proposals.

8. 52.0000-4004 Hand Delivered Bids, Quotes, or Proposals (AUG 2013)

(a) Should you elect to hand-deliver your bid, quote, or proposal, you must arrive at the Army Contracting Command, Rock Island Contracting Center (ACC-RI) Bid, Quote, and Proposal Receiving Area prior to the time set for receipt of offers AND within staffing hours. If you use a delivery service, it is your responsibility to ensure they are provided these instructions.

(b) The ACC-RI Bid, Quote, and Proposal Receiving Area is located on the

Rock Island Arsenal, Rock Island, IL, in the vestibule of the southwest entrance to Building 60 (first floor).

(c) The ACC-RI Bid, Quote, and Proposal Receiving Area is the ONLY area where hand-delivered bids, quotes, or proposals will be accepted.

(d) Staffing hours of the ACC-RI Bid, Quote, and Proposal Receiving Area are 8:00 a.m. to 4:00 p.m. CT, Monday through Friday. No packages will be accepted on Federal Holidays.

(e) The ACC-RI offices are located in a secure building; however, the Bid, Quote, and Proposal Receiving Area is accessible to the public. When you arrive at the Receiving Area, you will need to use a personal phone to contact an ACC-RI point of contact (POC) who will log in your bid, quote, or proposal. Primary POC phone numbers are: 309-782-5729 or 309-782-3218. If there is no answer on either of these numbers, you should call 309-782-6895 to reach an alternate POC. Note, these contact phone numbers are displayed on a table located in the Receiving Area.

(f) In the event this solicitation is an Invitation for Bids, reference FAR 52.214-7, "Late Submissions, Modifications, and Withdrawal of Bids". Conversely, if this solicitation is either a Request for Quotations or Request for Proposals, reference FAR 52.215-1, "Instructions to Offerors - Competitive Acquisitions."

9. 52.0000-4026 Standard Practice for Commercial Packaging (JUN 2005) Preservation/Packaging/Packing shall conform to commercial level in accordance with the requirements of American Society for Testing and Materials, ASTM D 3951 (DEC 21 1990). The contractor shall mark all shipments in accordance with the requirements of ASTM D 3951 (DEC 21 1990).

10. 52.0000-4042 INSPECTION AND ACCEPTANCE SITES (JUN 1997)

1. CLIN(S):

2. Government Procurement Quality Assurance Actions And/Or Inspection Will Be Performed At:

Pine Bluff Arsenal, Pine Bluff, AR.

3. Government Acceptance Will Be Performed At:

Pine Bluff Arsenal, Pine Bluff, AR..

11. NOTICE TO TRANSPORTATION CARRIERS

Beginning on 1 March 2016, Pine Bluff Arsenal will no longer receive unscheduled inbound shipments. Scheduling is executed via the Carrier Appointment System (CAS) in Electronic Transportation Acquisition (ETA) tool. Carriers without access to CAS call (870) 540-3610 or (870) 540-3611 for appointment 24 hours in advance. In order to obtain an appointment, you must provide a BOL (must contain the following: NSNs, DODIC, Nomenclature and HAZCLASS). This includes FAK. Pine Bluff Arsenal Transportation office hours of operation are 7:00 am – 2:30 pm Mon-Thur (except Federal Holidays). Closed for receiving on Fridays.

Carriers that do not register shipments in advance may be turned away.

ETA Registration New Users. If you do not have an ETA account, follow the instructions below:

1. Go to ETA Home https://eta.sddc.army.mil

2. Select Register for Access-> First Time Registration

3. Select CAS (Carrier Appointment System) in the Freight/Cargo section

4. Select a CAS Role from the drop down on the right-hand side. This should be the same role that was provided in the list sent by the depot.

5. Select the Generate Request Form button at the bottom of the page

6. Enter your information. All required fields contain an asterisk to the left of the field name. Users with a .mil address will be required to register their digital certificate (CAC).

7. After entering information. Select Submit Request.

8. Confirm your email address is correct by selecting OK. A page will be displayed with a Request ID. This will become your ETA User ID upon approval. Your request for access will be reviewed and you will be contacted via email.

9. There will be a time delay while the request is in the queue. The CAS ETA Administrator will approve depot users based on the depot implementation date.

10. Once approved, ETA will send an email with a link to obtain a password. If you are using your CAC to authenticate, you will not need a password.

11. Approved CAS ETA users will access CAS through the ETA Home Page (https://eta.sddc.army.mil) -> Select Freight/Cargo Systems -> Select Carrier Appointment System (CAS)

Existing Users:

1. Go to ETA Home https://eta.sddc.army.mil

2. Select Register for Access-> First Time Registration

3. Select CAS (Carrier Appointment System) in the Freight/Cargo section

4. Select a CAS Role from the drop down on the right-hand side. This should be the same role that was provided in the list sent by the depot.

5. Select the Generate Request Form button at the bottom of the page

6. Enter your information. All required fields contain an asterisk to the left of the field name.

7. After entering information. Select Submit Request.

8. Confirm your email address is correct by selecting OK.

9. There will be a time delay while the request is in the queue. The CAS ETA Administrator will approve depot users based on the depot implementation date.

10. Once approved, ETA will send an email informing you that you are approved and that you may begin using the CAS application.

11. Approved CAS ETA users will access CAS through the ETA Home Page (https://eta.sddc.army.mil) -> Select Freight/Cargo Systems -> Select Carrier Appointment System (CAS)

12. 52.211-15 Defense Priority and Allocation Requirements (APR 2008).

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

13. 52.211-14 Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Use Program Use (APR 2008).

Any contract awarded as a result of this solicitation will be DX rated order; X DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation.

14. 52.215-5 Facsimile Proposals (OCT 1997).

(a) Definition. Facsimile proposal, as used in this provision, means a proposal, revision or modification of a proposal, or withdrawal of a proposal that is transmitted to and received by the Government via facsimile machine.

(b) Offerors may submit facsimile proposals as responses to this solicitation. Facsimile proposals are subject to the same rules as paper proposals.

(c) The telephone number of receiving facsimile equipment is: (309) 782-8002.

(d) If any portion of a facsimile proposal received by the Contracting Officer is unreadable to the degree that conformance to the essential requirements of the solicitation cannot be ascertained from the document-

(1) The Contracting Officer immediately shall notify the offeror and permit the offeror to resubmit the proposal;

(2) The method and time for resubmission shall be prescribed by the Contracting Officer after consultation with the offeror; and

(3) The resubmission shall be considered as if it were received at the date and time of the original unreadable submission for the purpose of determining timeliness, provided the offeror complies with the time and format requirements for resubmission prescribed by the Contracting Officer.

The Government reserves the right to make award solely on the facsimile proposal. However, if requested to do so by the Contracting Officer, the apparently successful offeror promptly shall submit the complete original signed proposal.

15. 52.216-1 Type of Contract (APR 1984).

The Government contemplates award of a FIRM FIXED PRICE contract resulting from this solicitation.

16. 52.246-17 Warranty of Supplies of a Noncomplex Nature (JUN 2003)

(a) Definitions. As used in this clause --

Acceptance means the act of an authorized representative of the Government by which the Government assumes for itself, or as an agent of another, ownership of existing supplies, or approves specific services as partial or complete performance of the contract.

Supplies means the end items furnished by the Contractor and related services required under this contract. The word does not include “data”.

(b) Contractor's obligations.

(1) Notwithstanding inspection and acceptance by the Government of supplies furnished under this contract, or any condition of this contract concerning the conclusiveness thereof, the Contractor warrants that for 2 years after acceptance of material.

(i) All supplies furnished under this contract will be free from defects in material or workmanship and will conform with all requirements of this contract; and

(ii) The preservation, packaging, packing, and marking, and the preparation for, and method of, shipment of such supplies will conform with the requirements of this contract.

(2) When return, correction, or replacement is required, transportation charges and responsibility for the supplies while in transit shall be borne by the Contractor. However, the Contractor's liability for the transportation charges shall not exceed an amount equal to the cost of transportation by the usual commercial method of shipment between the place of delivery specified in this contract and the Contractor's plant, and return.

(3) Any supplies or parts thereof, corrected or furnished in replacement under this clause, shall also be subject to the terms of this clause to the same extent as supplies initially delivered. The warranty, with respect to supplies or parts thereof, shall be equal in duration to that in paragraph (b)(1) of this clause and shall run from the date of delivery of the corrected or replaced supplies.

(4) All implied warranties of merchantability and "fitness for a particular purpose" are excluded from any obligation contained in this contract.

(c) Remedies available to the Government.

(1) The Contracting Officer shall give written notice to the Contractor of any breach of warranties in paragraph (b)(1) of this clause within 45 days after discovery of the defect.

(2) Within a reasonable time after the notice, the Contracting Officer may either--

(i) Require, by written notice, the prompt correction or replacement of any supplies or parts thereof (including preservation, packaging, packing, and marking) that do not conform with the requirements of this contract within the meaning of paragraph (b)(1) of this clause; or

(ii) Retain such supplies and reduce the contract price by an amount equitable under the circumstances.

(3) (i) If the contract provides for inspection of supplies by sampling procedures, conformance of suppliers or components subject to warranty action shall be determined by the applicable sampling procedures in the contract. The Contracting Officer--

(A) May, for sampling purposes, group any supplies delivered under this contract;

(B) Shall require the size of the sample to be that required by sampling procedures specified in the contract for the quantity of supplies on which warranty action is proposed;

(C) May project warranty sampling results over supplies in the same shipment or other supplies contained in other shipments even though all of such supplies are not present at the point of reinspection; provided, that the supplies remaining are reasonably representative of the quantity on which warranty action is proposed; and

(D) Need not use the same lot size as on original inspection or reconstitute the original inspection lots.

(ii) Within a reasonable time after notice of any breach of the warranties specified in paragraph (b)(1) of this clause, the Contracting Officer may exercise one or more of the following options:

(A) Require an equitable adjustment in the contract price for any group of supplies.

(B) Screen the supplies grouped for warranty action under this clause at the Contractor's expense and return all nonconforming supplies to the Contractor for correction or replacement.

(C) Require the Contractor to screen the supplies at locations designated by the Government within the contiguous United States and to correct or replace all nonconforming supplies.

(D) Return the supplies grouped for warranty action under this clause to the Contractor (irrespective of the f.o.b. point or the point of acceptance) for screening and correction or replacement.

(4) (i) The Contracting Officer may, by contract or otherwise, correct or replace the nonconforming supplies with similar supplies from another source and charge to the Contractor the cost occasioned to the Government thereby if the Contractor--

(A) Fails to make redelivery of the corrected or replaced supplies within the time established for their return; or

(B) Fails either to accept return of the nonconforming supplies or fails to make progress after their return to correct or replace them so as to endanger performance of the delivery schedule, and in either of these circumstances does not cure such failure within a period of 10 days (or such longer period as the Contracting Officer may authorize in writing) after receipt of notice from the Contracting Officer specifying such failure.

(ii) Instead of correction or replacement by the Government, the Contracting Officer may require an equitable adjustment of the contract price. In addition, if the Contractor fails to furnish timely disposition instructions, the Contracting Officer may dispose of the nonconforming supplies for the Contractor's account in a reasonable manner. The Government is entitled to reimbursement from the Contractor, or from the proceeds of such disposal, for the reasonable expenses of the care and disposition of the nonconforming supplies, as well as for excess costs incurred or to be incurred.

(5) The rights and remedies of the Government provided in this clause are in addition to and do not limit any rights afforded to the Government by any other clause of this contract.

17. 52.247-34 F.O.B. Destination (NOV 1991).

(a) The term "f.o.b. destination," as used in this clause, means--

(1) Free of expense to the Government, on board the carrier's conveyance, at a specified delivery point where the consignee's facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

(2) Supplies shall be delivered to the destination consignee's wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarded for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.

(b) The Contractor shall--

(1)(i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

(End of clause)

18. 252.209-7993 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under any Federal Law – Fiscal Year 2014 Appropriations (Deviation 2014-OO0009) (FEB 2014)

(a) In accordance with sections 8113 and 8114 of the Department of Defense Appropriations Act, 2014, and sections 414 and 415 of the Military Construction and Veterans Affairs and Related Agencies Appropriations Act, 2014 (Public Law 113-76, Divisions C and J), none of the funds made available by those divisions (including Military Construction funds) may be used to enter into a contract with any corporation that—

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that—

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability,

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

19.

252.232-7006 Wide Area Workflow Payment Instructions (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area Workflow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Combo Invoice/Receiving Report

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in

WAWF, as specified by the contracting officer.

TRANS OFC MF PROPERTY OFC (W911RP)

RECEIVING SECTION RSI BRANCH

BLDG 23-330

PINE BLUFF ARSENAL

PINE BLUFF, AR 71602-9500

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC

HQ0303

Issue By DoDAAC

W52P1J

Admin DoDAAC

W52P1J

Inspect By DoDAAC

W41G26

Ship To Code

Ship From Code

N/A

Mark For Code

Service Approver (DoDAAC)

N/A

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Contract Specialist: rebecca.y.jessen.civ@mail.mil

Procuring Contracting Officer: marianne.whitmer.civ@mail.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

marianne.whitmer.civ@mail.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

20. 52.246-4536 Supplemental Information For 2-D Bar Coding Verification (JUL 2005)

The following website and guide are provided as reference and to assist in understanding and constructing 2D bar code item identification labels.

a. Web site for government developed bar code software, Joint Munitions Bar Code Labeler (JMBL) is:

http://www.savi.com/downloads/JMBL/index.html

b. An Introductory Guide, The Requirements and Implementation of 2D Bar Codes on Munitions, is available upon request from HQ, JMC, AMSJM-LIS, 309-782-5206.

The guide will give you background information on the what and why of 2D bar codes for exterior shipping containers (boxes, cans, etc.) and unitized (palletized) loads. The website makes available software originally developed for government-owned, government-operated facilities. The software generates MIL-STD-129P compliant ammunition identification labels, and supports specific printers and label stock which conform to the requirements of MIL-PRF-61002A. The website also contains software user's and administrator's guides you may find helpful. The software is now made available to JMC suppliers at no charge, but comes with no warranty or support of any kind.

21. 52.0000-4545 MIL-STD-1916 (OCT 2000)

The Department of Defense (DoD) Preferred Methods for this Acceptance of Product, MIL-STD-1916, shall be used for this procurement action. All references to MIL-STD-105, MIL-STD-414, MIL-STD-1235, and ANSI Z1.4 appearing in the Technical Data Package (TDP) are replaced by MIL-STD-1916. Verification Levels (VL) shall replace AQLs and shall be VL IV for major characteristics and VL II for minor characteristics.

22. 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (DEC 2013)

(a) Definitions. As used in this clause—

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., Dun & Bradstreet’s Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/ Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/Normontwikkeling/Certificatieschemas-en-keurmerken/Schemabeheer/ISOIEC-15459.htm under “Register.”

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

(If items are identified in the Schedule, insert “See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government’s unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

23. 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING

REPORTS (JUN 2012)

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests.