SPECIAL_PACKAGING_INSTRUCTION_NATIONAL_STOCK_NUMBER_P13-19-37.pdf

SPECIAL PACKAGING INSTRUCTION NATIONAL STOCK NUMBER

NOMENCLATURE SPI NUMBER (PN)QUPUI

SEE NOTE (B)

GRENADE, HAND, SMOKE, M18 EA 16

MILITARY PRESERVATION DRAWING OR

P13--19--37 Cleaning & Drying shall be in accordance with MIL--STD--2073--1

(SPI)

NOT APPLICABLE TO INTERPLANT SHIPMENTS (A)

ITEM WEIGHT--

APPROVAL REVISION DATE

0.960 lbs

5 NOV 04

DISTRIBUTION STATEMENT A: Approved for public release, distribution unlimited.

PAGE NUMBER NUMBER OF PAGES

155--0112--019FMS --

REQUIREMENT

(MIL--STD--2073--1, Method HM)

STEPS SPECIFICATION STYLE TYPE GRADE CLASS SIZE AND REMARKS

(INCHES)

UNIT PACK LOGISTICS DATA (Approximate unit pack weight and size)

WEIGHT (POUNDS) CUBE (CUBIC FEET) SIZE (EXTERIOR FEET)

INTERMEDIATE PACKAGING AND PACKING MARKING

REMARKS/ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.

III 1 6 1/2 x 3 diameterContainer, Fiber (C) 1

SW W5cFiberboard Pads (D) 2 4 A 2Container (E) 3

1 2Closure (G) 4 1 0.072 dia

QUALITY PERFORMANCE and TESTING REQUIREMENTS

MIL--C--2439

ASTM D4727

PPP--B--621

ASTM D3953

(alt)ASTM A 641

0.856

In accordance with MIL--STD--2073--1 As specified hereon.

In accordance with MIL--STD--129 As specified hereon.

In accordance with MIL--STD--2073--1 As specified hereon.

Unless otherwise specified, materials shall be minimum size in accordance with MIL--STD--2073--1. Tolerances shall be in accordance with material specifications.

SEE NOTE (K)

30.00 lbs

SEE NOTES (G) AND (H) SEE NOTE (I)

X

XX

X

X

1.13 x 1.13 x .67

CF

DWG 13--9--119

12 1/2 x 12 1/2 x 6 3/4 inside

1/2 x 0.020 Finish B (alt) ASTM D6880 4 2 Size above, Treatment B

(A) -- This SPI is not applicable for Interplant shipments. Packaging and marking for interplant ship-ment is for supplies and materials that do not directly enter the military supply system. Typical interplant shipments are shipments from a vendor to a subcontractor or a prime contractor, or between contractors and subcontractors, or from a vendor or contractor to a military arsenal, plant, or other activity for evaluation, immediate use, or further processing as specified in the applicable contract.

(B) -- Grenades are listed in accordance with their color, NSN and DODIC:

Grenade, Hand, Smoke, GREEN 1330--00--289--6851 G940

Grenade, Hand, Smoke, RED 1330--00--289--6852 G950

Grenade, Hand, Smoke, VIOLET 1330--00--289--6853 G955

Grenade, Hand, Smoke, YELLOW 1330--00--289--6854 G945

AMSRD---ECB---ENA---P

ECBC 81361ITEM SIZE ---

ITEM SI

155---0119---001

155---0116---023

B

A

26 JAN 06

10 NOV 04

Original Preparer:

MKP

Revised by:

6 x 2 1/2 diameterITEM SIZE ---

ITEM CODE ---

ITEM DATA

M.Schuring M.K. Peck

155---0134---001 C 22 AUG 07mkp

(APPROX)

Date: 29 SEP 06

MKP

SPECIAL PACKAGING INSTRUCTION

NATIONAL STOCK NUMBER

NOMENCLATURE SPI NUMBER (PN)

SEE NOTE (B)

GRENADE, HAND, SMOKE, M18 P13--19--37

PAGE NUMBER

(C) -- Sixteen grenades shall be individually packaged in fiber containers conforming to MIL--C--2439, Drawing 13--9--119, as specified on Drawing 13--9--120. Spacers, as shown in Drawing B13--19--143,must be in place before the grenade is placed in the individual container. Fuze Protec-tor Collars, Drawing C13--19--142, must be placed on the grenade before the fiber container is closed.

(D) -- Fiberboard pads as specified shall completely separate the unit containers from shipping container.

Additional pads shall be used as required to insure a tight pack.

(E) -- Sixteen grenades, unit packed as specified shall be packaged together, fuze end up, in single layer, in a fiberboard--padded, overseas type shipping container as specified.

(F) -- An instruction card conforming to Drawing 13--19--38 shall be placed on top of the unit packaged grenades, inside of the shipping container.

(G) -- Shipping containers shall be closed and strapped in accordancewith the applicable container speci-fications and ASTM D 4675, using heavy--duty, galvanized 1/2--inch flat strapping conforming to ASTMD3953. Alternately, containersmay be closed and strapped using 0.072 dia roundwire strap-ping conforming to ASTMA 641, Class 1, and the following performance requirements: 130ksi mini-mum tensile strength, 6%minimumelongation in 10 inchesusing testmethodE8, nowelds permitted after final draw, and the Adherence of Coating test, currently 10.1, shall be conducted around a 1d mandrel for 8 turns without the wire fracturing. Two straps (flat or round) shall be applied girthwise around the top, sides and bottom, 1--1/2 inches (nominal) from the ends of the shipping containers.

(H) -- Unitization. Palletize the grenades according to AMCDrawings AMC 19--48--4116--20PA1002 and AMC19--48--4116/65--20PA1002. Pallets shall comply withMIL--P--15011, Style 1, Size A (standard 40” x 48”), TYpe 1 Class 1, or ASME MH1/9--11BW4048P.

(I) -- Marking.

1. In addition to any special marking required by the contract or order, Fiber Containers shall be marked in accordance with Drawing C13--9--120 and MIL--STD--129. Shipping Containers shall be marked in accordance with Drawing D13--19--83, MIL--STD--129, and Code of Federal Regulations Title 49 (CFR 49). Mark Palletized loads in accordance with MIL--STD--129 and CFR 49. When transported by air, shipping containers and pallets must also have any additionalmarking and labels required by IATA, ICAO, and TM 28--250.

2. FollowingCFR49, paragraph 172.400a.(a)(2), hazard labels and “CAO” labels (when applicable) may be omitted from the individual shipping containers of grenades if at least one of each of the re-quired labels is displayed on each pallet.

NOMENCLATURE SPI NUMBER (PN)

SEE NOTE (B)

GRENADE, HAND, SMOKE, M18 P13--19--37

PAGE NUMBER

(J) -- Hazardous Materials Shipping Data.

1. These grenades are regulated hazardousmaterials for all modes of transportation. All shipments of this item must comply with 49 CFR, Parts 100--180, the International Air Transport Association (IATA) Dangerous Goods Regulations, The International Maritime Organization (IMO) Dangerous Goods Code, Air Force Manual 24--204 (TM38--250), the Defense Transportation Regulation (DTR) 4500.9--R, Part II, Chapters 204 and 205. The shipper has the responsibility to insure the grenades are properly marked. labeled, packed, certified and meet all regulatory requirement for the mode(s) of shipment utilized.

2. A copy of this Special Packaging Instruction MUST accompany the Hazardous Materials Ship-per’s Declaration Form (shipping papers) when shipped byMilitary Air. Air shipments of this packag-ing configuration are permitted by Cargo Air Only.

3. Proper Shipping Name: AMMUNITION, SMOKE

UN IDentification Number: 0303

Hazard Classification: 1.4(G)

Packing Group: II

(K)-- PACKAGING QUALITY ASSURANCE PROVISIONS (PQAP)

PART I -- APPLICABLE DOCUMENTS

Military standards

MIL--STD--2073--1 -- Standard Practice For Military Packaging MIL--STD--1916 -- DOD Preferred Methods for Acceptance of Product

PART II -- QUALITY PROVISIONS

1. First Article Inspection.

a. Lotting. The first article lot shall consist of the packaged containers required to package the first article lot of Grenades specified in MIL--DTL--12326.

b. Sampling. Three packed containers, and their contents, shall be randomly selected from the first article lot of packaged grenades.

c. Inspection Procedure. The sample containers and contents shall be inspected in accordance with the classification of characteristics.

NOMENCLATURE SPI NUMBER (PN)

SEE NOTE (B)

GRENADE, HAND, SMOKE, M18 P13--19--37

PAGE NUMBER

d. Acceptance Criteria. If any first article sample item fails to comply with any of the applicable requirements, the first article sample shall be rejected.

2. Conformance Inspection.

a. Lotting. A lot shall consist of the number of packaged containers, represented in a lot of gre-nades, presented for acceptance under the provisions of MIL--DTL--12326, except that the items shall be packaged as specified herein.

b. Sampling. Sampling shall be conducted in accordancewith the classification of characteristics and the attributes sampling plan of MIL--STD--1916. Sample containers shall be selected at random.

c. Inspection Procedure. The sample containers and contents shall be inspected in accordance with the classification of characteristics. Failure of any sample item to conform to any characteristic in the classification of characteristics shall be cause for rejection of the lot represented.

PART III -- Inspection Requirements

CLASSIFICATION OF CHARACTERISTICS

Sampling and Inspection Category Characteristics Acceptance Criteria Method

Critical None Defined

Major

101 Item clean and dry VL--IV VI 102 Collar Fuze Protector correct VL--IV VI/CE 103 Inner fiber containers and closure correct VL--IV VI/CE 104 Wood box and closure correct VL--IV VI/CE 105 Inner fiberboard pads correct VL--IV VI/CE 106 Instruction card correct VL--IV VI/CE 107 Marking and labeling correct VL--IV VI/CE 108 UN Performance--Oriented Packaging (POP) test 100%;ACC 0, Rej 1 VI/CE certification correct and current

Minor None Defined

INSPECTION EQUIPMENT CRITERIA:

CE -- Commercial Equipment VI -- Visual Inspection

NOMENCLATURE SPI NUMBER (PN)

SEE NOTE (B)

GRENADE, HAND, SMOKE, M18 P13--19--37

PAGE NUMBER

PART IV -- CERTIFICATION REQUIREMENTS

Certification shall be required for each characteristic specified below and shall include actual examination and test results when required herein. Results of examinations and tests shall be on file at the contractor’s facility and shall be available to the Government for review.

Number Characteristic To Comply with

401 Packaging material Applicable specification or standard specified in this SPI.