Directions_to_Bldg_1458_Fort_Belvoir_VA.docx

DIRECTIONS TO BUILDING 1458

THE OFFIC OF THE ADMINISTRATIVE ASSISTANT

Fort Belvoir is located on US Route 1 approximately 15 miles SW of DC and about 5 miles south of the Beltway intersection of I-95 and I-495.

Tulley Gate All persons entering the base with a CAC or a Military ID must stay in the left lane and show their CAC/Military ID to the gate guard. Anyone without a CAC or Military ID must use the far right lane and go inside the Visitor Center for a one day visitor pass. You will need to show your driver’s license in order to receive a pass.

After receiving the visitor pass, continue on Pohick Road to the second traffic light (Gunston Road). Turn right onto Gunston Road. Turn right on 3rd street. Park anywhere in the parking lot to your left. The Building 1458 is to the right of the parking lot. Once inside the building take the stairs inside the lobby to the second floor. Go through the double doors and take a left at the end of the hallway. The conference room is about 15 feet to your right.

From the south:

Take I-95 North to 7100 East (Fairfax County Parkway). 7100 dead-ends at Route 1. Turn left onto Route 1 North and take the next right (Tulley Gate) onto Fort Belvoir.

From Old Town Alexandria:

Take the George Washington Parkway past Mount Vernon, the Estate. Mount Vernon Highway dead-ends into US Route 1. Turn left onto US Route 1 South. The second traffic light is Belvoir Road. DoD registered vehicles may enter through the Pence Gate, all vehicles others must continue to the next light, Beulah Road/Pohick Road, and turn left into Tulley Gate.

From the Springfield/Franconia Parkway:

Take the Springfield/Franconia Parkway northeast past the Springfield Metro Station. At the first traffic light after the metro station, turn right onto Beulah. Follow Beulah for approximately 3 miles where it runs direction into Woodlawn Road. DoD decal vehicles may enter this gate. All other vehicles must turn right onto Telegraph Road. Continue on Telegraph Road approximately 2 miles to 7100 Fairfax County Parkway. Turn left onto 7100 Fairfax County Parkway East. 7100 ends at US Route 1. Turn left onto US Route 1 North, and take the next right into Tulley Gate.

From the Beltway (I-95) east side:

Take the Beltway South over the Woodrow Wilson Bridge and take the Route 1, South Exit. Follow US Route 1 for approximately 7 miles. Turn left onto Beulah/Pohick Road to enter into Tulley Gate.

From the north and Beltway (I-495) west side:

Take I-395 south and continue past Springfield on I-95 to 7100 East (Fairfax County Parkway) or on the Beltway take I-495 to I-95 south and proceed southbound until reaching 7100 East. 7100 dead-ends at US Rout 1. Turn left onto Route 1 North and take the next right into Tulley Gate.