SOW _12Aug2015.pdf
PDF 209 KB Posted
- Solicitation number
- W52P1J-15-T-3055
About this file
Statement of Work dated August 12 2015
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W52P1J15T3055_Solicitation_Released _09112015.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
August 12, 2015
SOW, Galvanizing, Page 1 of 2
Statement of Work (SOW) Hot dip galvanizing of MK79 metal pallets
Quantities:
4,760 Sets (Consists of top and bottom frame – one (1) each) 248 lbs per set Lot shipment = 140 sets
Variation in quantity of -0% / +10% is permissible for quantity specified.
Scope:
The vendor location, where all work will be performed, shall be within a 200 mile driving radius of McAlester, OK. McAlester Army Ammunition Plant (MCAAP) will transport pallets to and from the vendor’s location. The vendor shall be responsible for the loading and unloading of Government trailers at the job site.
Each pallet set consists of a top and a bottom frame. The condition of the pallets is new and rusted. Pallets shall be hot dip galvanized to ASTM-A123 / A123M standards. The Contractor must provide references to demonstrate the ability to meet this standard.
To insure a legible stencil, Contractor will give special attention to all stenciled areas during the galvanizing process. Surface roughness for all saddle areas must also be kept to a minimum.
Pallet Top Frame – Approx. 70” x 38” x 3.25”
August 12, 2015
SOW, Galvanizing, Page 2 of 2
Pallet Bottom Frame – Approx. 70” x 38” x 6.75”
A preproduction testing quantity of three (3) pallet sets shall be provided to the Government for testing purposes, within 14 calendar days of Contractor receipt of the pallets. Preproduction testing may be waived if the Contractor has previous galvanizing experience with MCAAP. See also the clause entitled, "First Article Approval -- Government Testing".
Once the preproduction testing quantity is approved in writing by the Contracting Officer, the Contractor shall have seven (7) calendar days to complete each lot of pallet sets for Government pickup. Each lot shall be supported with a Certificate of Conformance. A Certificate of Conformance shall be provided with each offeror’s submission, preproduction testing quantity, and each lot delivered.
The Service Contract Act applies to this procurement. Please submit a copy of the Service Contract Act (SCA) Wage Determination (WD) that applies to your appropriate labor categories.
SCA WDs are accessible at the following website: http://www.wdol.gov
File details come from the government source that posted it. Updated .