Attachment 0003 - 1295325REV C Support Foam.pdf

This is a technical engineering drawing for a foam support component (Part No. I2944515).

The drawing specifies a polyethylene foam cushioning material in a single-piece design with closed-cell foam plank construction, meeting DOD-STD-001000 (AR), MIL-A-2550, and ANSI Y14.5M-1982 standards. The primary material is Type III, Class 4, Grade A polyethylene foam in charcoal black color with a minimum density of 3 pounds per cubic foot. The finished piece must not outgas flammable, explosive, poisonous, or corrosive products. An alternative material option is specified as closed-cell foam plank (A-A-59136, Type III, Class 3) with maximum water absorption not exceeding 0.3 pound per square foot and a Lower Explosive Limit of 10% maximum. The component features detailed dimensional specifications including overall length of 12.78 inches, width of 6.39 inches, height of 4.92 inches, with three 3.97-diameter holes and various other precision measurements indicated on the technical drawing. The drawing was prepared for the U.S. Army Missile Command at Redstone Arsenal, New Jersey, with contractor information included. No specific contract award dates, response dates, or pricing terms are evident from this technical specification document.