Solicitation - W519TC27QA013.pdf
PDF 3 MB Posted
- Attached to
- M82 Bore Seal
- Solicitation number
- W519TC-27-Q-A013
About this file
This is a Request for Quote (RFQ) solicitation issued by the Army Contracting Command - Rock Island for the procurement of Bore Seal Rings in support of the M82 Grenade Program at Pine Bluff Arsenal. The solicitation number is W519TC27QA013, issued on November 17, 2026, with an offer due date of December 3, 2026, at 10:00 AM CST. This is a 100% Small Business Set-Aside under NAICS 339991 (Gasket, Packing, and Sealing Device Manufacturing), with a Product Service Code of 5331.
The solicitation establishes two Contract Line Item Numbers (CLINs): CLIN 0001 for 76,500 Bore Seal Rings to be manufactured in accordance with Drawing 13-16-169, and CLIN 1001 for an option quantity of up to 76,500 additional units at the same specification. A CLIN 0002 is also included for first article/preproduction sample submission (20 samples). The contract will be firm fixed price, with delivery required by July 29, 2027, to Pine Bluff Arsenal's Central Shipping Receiving Point. Offerors must submit pricing via a completed Price Matrix (Attachment 0001) for all option quantity ranges or be deemed ineligible. Inspection and acceptance occurs at destination using MIL-STD-1916 sampling standards. Payment will be made through the Defense Finance and Accounting Service via Wide Area Workflow (WAWF) with electronic invoicing required. Contractors must be registered in the System for Award Management (SAM), provide their CAGE Code and UEI number, and submit complete quote packages via email to the contract specialist and contracting officer. Proposals remain valid for 60 days. The solicitation incorporates numerous FAR and DFARS clauses covering topics including commercial products/services terms, trafficking in persons prohibitions, security requirements, buy American provisions, and various compliance and representations certifications.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 0001 Price Matrix.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WOMEN-OWNED SMALL
BUSINESS (WOSB)
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES
1. REQUISITION NUMBER PAGE 1 OF
2. CONTRACT NUMBER 3. AWARD/EFFECTIVE
DATE
4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE
DATE
7. FOR SOLICITATION
INFORMATION CALL:
a. NAME b. TELEPHONE NUMBER (No collect 8. OFFER DUE DATE/
LOCAL TIME
9. ISSUED BY
13b. RATING
14. METHOD OF SOLICITATION
CODE
15. DELIVER TO 16. ADMINISTERED BY CODE
18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/
OFFEROR
CODE
FACILITY
CODE
CODE
TELEPHONE NUMBER
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN
OFFER
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK
BELOW IS CHECKED
REQUEST
FOR QUOTE
(RFQ)
INVITATION
FOR BID
(IFB)
REQUEST
FOR
PROPOSAL
(RFP)
SEE ADDENDUM
19.
ITEM NUMBER
20.
SCHEDULE OF SUPPLIES/SERVICES
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
AMOUNT
(Use Reverse and/or Attach Additional Sheets as Necessary)
25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH
AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND
ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS
SPECIFIED
29. AWARD OF CONTRACT: REFERENCE OFFER
DATED . . YOUR OFFER ON SOLICITATION
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR
30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED
31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
STANDARD FORM 1449 (REV. 11/2021)
Prescribed by GSA - FAR (48 CFR) 53.212
10. THIS ACQUISITION IS UNRESTRICTED OR
NORTH AMERICAN
INDUSTRY CLASSIFICATION
STANDARD (NAICS):
SIZE STANDARD:
13a. THIS CONTRACT IS A
RATED ORDER UNDER
THE DEFENSE PRIORITIES
AND ALLOCATIONS
SYSTEM - DPAS (15 CFR 700)
SET ASIDE: % FOR:
11. DELIVERY FOR FREE ON
BOARD (FOB) DESTINATION
UNLESS BLOCK IS MARKED
SEE SCHEDULE
12. DISCOUNT TERMS
ARE ARE NOT ATTACHED
ARE ARE NOT ATTACHED
27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3
AND 52.212-5 ARE ATTACHED. ADDENDA
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA
8(A)
ECONOMICALLY
DISADVANTAGED
WOMEN-OWNED SMALL
BUSINESS (EDWOSB)
SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
(SDVOSB)
HUBZONE SMALL
BUSINESS
SMALL BUSINESS
NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.
calls)
Section A - Solicitation/Contract Form
Bore Seal RingsInstrument Name:
Product Service Code : 5331
1. Army Contracting Command - Rock Island (ACC-RI) has a requirement for Bore Seal Rings in support of the M82 Grenade Program at Pine Bluff Arsenal (PBA). This solicitation will result in a firm fixed price base contract with an up to 100% quantity option. This solicitation is posted in accordance with RFO FAR Part 12, Acquisition of Commercial Products and Commercial Services.
This requirement is a 100% Small Business Set Aside under NAICS 339991 - Gasket, Packing, and Sealing Device Manufacturing.
2. The following Contract Line Item Numbers (CLINs) are established:
CLIN 0001 - Bore Seal Rings, 76,500 each in accordance with Drawing 13-16-169
CLIN 1001 - Bore Seal Rings Option Quantity - Up to 76,500 each in accordance with Drawing 13- 16-169
Please see CLINS for more information regarding Preproduction samples.
3. Offeror shall submit a completed Attachment 0001 - Price Matrix in lieu of Section B Pricing.
Failure to provide firm fixed prices for all option quantity ranges is unacceptable and will render the offeror ineligible for award.
4. A complete quote package is defined as and contains the Solicitation W519TC-27-Q-A013 filled out completed and signed by the offeror where applicable. Submissions missing information regarding pricing of all CLINS and confirmation of delivery, will be deemed as unresponsive.
Complete packages will be submitted via email, by emailing contract specialist, Abby Schneider at abigail.b.schneider.civ@army.mil and contracting officer, Michelle Lund at michelle.m.lund3 .civ@army.mil, before the solicitation closing date and time: 10:00AM CST pm 3 December 2026.
a. Contractor is liable for ACCURACY of submitted proposals and for any incurred costs if proposal is submitted erroneously.
W519TC27QA013
b. Any contract resulting from this solicitation will be paid by DFAS via Wide Area Workflow (WAWF). Electronic Invoicing instructions shall be provided at time of award. A DD250 will be required. Please see DFARS 252.232-7006 for more information.
c. Proposals submitted in response to this solicitation shall remain valid for 60 days.
d. Contractors must be registered in the System for Award Management (SAM) in order to be eligible for an award with the U.S. Government. Application to this site can be found under the following link: ww.sam.gov. Failure to comply with SAM registration may deem a quote ineligible for award.
e. Please provide your CAGE Code.
f. Please provide your UEI number.
g. Offeror shall reference solicitation number W519TC-27-Q-A013 and company name in the quote email subject line.
h. Our email system standard is an estimated limit often (10) megabytes per incoming email.
Please be award that large files may require extra time to be delivered into our email system.
i. All quote documents must be fully delivered into the email systems and time stamped by the Government server no later than 10:00AM CST pm 3 December 2026.
5. The contract resulting from this solicitation will receive payment by DFAS via Wide Area Workflow (WAWF). Please see DFARS 252.232-7006 for more information.
6. Inspection and Acceptance is at Destination. Delivery FOB Destination, Pine Bluff Arsenal.
7. This Executive Summary is provided for administrative assistance only and is not intended to alter the terms and conditions of the contract in any manner. Provisions of this solicitation and technical data shall prevail over this executive summary.
8. Points of contact for this solicitation is Abby Schneider, abigail.b.schneider.civ@army.mil, and Michelle Lund, michelle.m.lund3.civ@army.mil.
*** END OF NARRATIVE 1 ***
Section B - Supplies or Services & Prices or Costs
Additional Information/Notes
Preproduction Samples
Pre-production sample requirements: 20 samples for examination. The contractor is required to perform all required measurements for all components and prepare a FAT/pre-production Report detailing all those measured inspections. Every requirement and dimension noted in drawing and specification must be measured and reported. Also, all required Material Certifications along with Certificates of Analysis must be included in the report. Failure to provide this data and report will cause delays in approval and acceptance.
Preproduction Sample. The Preproduction Sample consisting of the items listed below, shall be (i) representative of items to be manufactured using the process and procedures as contract production and (ii) inspected and tested to all contract drawing& specifications requirements.
PREPRODUCTION SAMPLE ITEMS:
QUANTITY: 20
ITEM NOMENCLATURE: bore seal
DRAWING/SPECIFICATIONS: Drawing 13-16-169
b. The approved Preproduction Sample will not serve as a manufacturing standard.
c. The contractor shall notify the Contracting Officer within 14 calendar days prior to production of the Preproduction Sample so that the Government may witness the production if desired.
d. The contractor shall submit the Preproduction Samples within 30 calendar days from the date of this contract to the address given in the delivery/shipping instructions of this order/contract marked "PREPRODUCTION SAMPLES: Contract No. ______TBD__________ Lot/Item No. _____TBD __________". Within _10____ calendar days after the Government receives the Preproduction Samples, the Contracting Officer shall notify the contractor, in writing, of the conditional approval or disapproval of the Preproduction Sample. The notice of conditional approval or disapproval shall not relieve the contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the contractor. A notice of disapproval shall cite reasons for the disapproval.
e. If the Preproduction Sample is disapproved, the contractor, upon Government request, shall make any necessary changes, modifications, or repairs to the Preproduction Sample or submit another Preproduction Sample for Government inspection. All costs related to these submissions are to be borne by the contractor, including any and all costs for additional samples following a disapproval. The Government shall take action on the resubmitted Preproduction Sample within the time specified in paragraph (c) above. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule, or for any additional costs to the Government related to these resubmissions.
f. If the contractor fails to deliver any Preproduction Sample on time, or the Contracting Officer disapproves any Preproduction Sample, the contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract.
g. Unless otherwise provided in the contract, and if the approved Preproduction Sample is not consumed or destroyed by testing, the contractor may deliver the approved Preproduction Sample as part of the contract quantity if it meets all contract requirements for acceptance.
h. If the Government does not act within the time specified in paragraph (c) or (d) above, the Contracting Officer shall, upon timely written request form the contractor, equitably adjust under the changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay.
i. Before the Preproduction Sample approval. The acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the contractor. Before Preproduction Sample approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government.
j. The Government may waive the requirement for Preproduction Samples where supplies identical or similar to those called for in the schedule have been previously furnished by the offeror /contractor and have been accepted by the Government. The offeror/contractor may request a waiver.
k. The contractor shall produce both the Preproduction Sample and the production quantity at the same facility and shall submit a certification to this effect with each Preproduction Sample.
*** END OF NARRATIVE 1 ***
Item Supplies/Service Quanti ty
Unit Unit Price Amount
0001 BORE SEAL, M82 SIMULANT
SMOKE GRENADE Made in accordance with Dwg 13-16-169
Drawing Revision Number: 13-19-
CLIN only - Requisition Document Number (MILSTRIP, DLMS, FEDSTRIP): W41G26619400N1
Product Service Code: 5331
North American Industry Classification System (NAICS):
339991
Bill to Party: W41G26
Pricing Arrangement: Firm Fixed Price
76,500 Each
0002 FIRST ARTICLE BORE SEAL M82
STIMULANT GRENADE
Drawing Revision Number: 13-16-
169 REVE
CLIN only - Requisition Document Number (MILSTRIP, DLMS, FEDSTRIP): W41G266194007Q
Product Service Code: 5331
1 Lot
North American Industry Classification System (NAICS):
339991
Bill to Party: W41G26
Pricing Arrangement: Firm Fixed Price
Option Line Item
OPTION QUANTITY BORE SEAL,
M82 SIMULANT SMOKE
GRENADE Made in accordance with Dwg 13-16-169
Drawing Revision Number: 13-19-
CLIN only - Requisition Document Number (MILSTRIP, DLMS, FEDSTRIP): W41G26619400N1
Product Service Code: 5331
North American Industry Classification System (NAICS):
339991
Bill to Party: W41G26
Pricing Arrangement: Firm Fixed Price
76,500 Each
Section C - Description/Specifications/Statement of Work
Requirements
BORE SEAL, M82 SIMULANT SMOKE GRENADE
Section D - Packaging and Marking
Packaging and Delivery Information:
NOTE: ALL CARRIER SHIPMENTS MUST BE SCHEUDLED IN ADVANCE. SEE ADDITIONAL
INFORMATION SECTION FOR MORE INFORAMTION.
Delivery shall be made to the following address:
US ARMY, PINE BLUFF ARSNEAL
CENTRAL SHIPPING RECEIVING POINT (CSRP)
BLDG 53-990 504TH ST
PINE BLUFF, AR 71602
PACKAGING (PRESERVATION/PACKING/MARKING):
Containers shall be clearly marked, at a minimum, with the information as follows:
a. Name of contractor
b. Contract / Purchase Order Number
c. Description of items contained therein
d. Lot / Batch Number(s)
*** END OF NARRATIVE 1 ***
Section E - Inspection and Acceptance
INSPECTION AND ACCEPTANCE:
Inspection and acceptance will be at destination, unless otherwise provided herein. Until delivery and acceptance, and after any rejections, risk of loss will be on the contractor, unless loss results from negligence of the United States Government.
ACCEPTANCE OF PRODUCT: MIL-STD-1916
The Department of Defense (DoD) Preferred Methods for this Acceptance of Product, MIL-STD- 1916, shall be used for this procurement action. All references to MIL-STD-105, MIL-STD-414, MIL- STD-1235, and ANSI Z1.4 appearing in the Technical Data Package (TDP) are replaced by MIL- STD-1916. Verification Levels (VL) shall replace AQLs and shall be VL IV for major characteristics and VL II for minor characteristics.
*** END OF NARRATIVE 1 ***
FAR Clauses Incorporated by Full Text
Number Title Effective Date
Alternate Deviation
Variation Effective Date
52.246-15 Certificate of Conformance. 1984-04
As prescribed in 46.315 , insert the following clause in solicitations and contracts for supplies or services when the conditions in 46.504 apply:
Certificate of Conformance (Apr 1984)
(a) When authorized in writing by the cognizant Contract Administration Office (CAO), the Contractor shall ship with a Certificate of Conformance any supplies for which the contract would otherwise require inspection at source. In no case shall the Government’s right to inspect supplies under the inspection provisions of this contract be prejudiced. Shipments of such supplies will not be made under this contract until use of the Certificate of Conformance has been authorized in writing by the CAO, or inspection and acceptance have occurred.
(b) The Contractor’s signed certificate shall be attached to or included on the top copy of the inspection or receiving report distributed to the payment office or attached to the CAO copy when contract administration (Block10 of the DD Form 250) is performed by the Defense Contract Administration Services. In addition, a copy of the signed certificate shall also be attached to or entered on copies of the inspection or receiving report accompanying the shipment.
(c) The Government has the right to reject defective supplies or services within a reasonable time after delivery by written notification to the Contractor. The Contractor shall in such event promptly replace, correct, or repair the rejected supplies or services at the Contractor’s expense.
(d) The certificate shall read as follows:
I certify that on ______ [ insert date ], the ____ [ insert Contractor’s name ] furnished the supplies or services called for by Contract No._____ via ____ [ Carrier ] on ________ [ identify the bill of lading or shipping document ] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this or on the attached acceptance document.
Date of Execution: ________________________________
Signature: _______________________________________
Title: ____________________________________________
(End of clause)
Overall Contract Inspection/Acceptance Locations
0001 Inspection and Acceptance Location
Both Destination Instructions: SEE SECTION E FOR MORE INFORMATION
DoDAAC: W41G26 CountryCode: USA
W0K4 USA OSC PINE BLUFF ARS
504TH ST BLDG 53990, CENTRAL RECEIVING SHIPPING POINT
PINE BLUFF, AR 71602-9500
UNITED STATES
0002 Inspection and Acceptance Location
Both Destination Instructions: SEE SECTION E FOR MORE INFORMATION
DoDAAC: W41G26 CountryCode: USA
W0K4 USA OSC PINE BLUFF ARS
504TH ST BLDG 53990, CENTRAL RECEIVING SHIPPING POINT
PINE BLUFF, AR 71602-9500
UNITED STATES
Option Line Item
Inspection and Acceptance Location
Both Destination Instructions: SEE SECTION E FOR MORE INFORMATION
DoDAAC: W41G26 CountryCode: USA
W0K4 USA OSC PINE BLUFF ARS
504TH ST BLDG 53990, CENTRAL RECEIVING SHIPPING POINT
PINE BLUFF, AR 71602-9500
UNITED STATES
Section F - Deliveries or Performance
0001 Delivery Schedule Delivery On Or Before Delivery Date 29 Jul 2027
76,500 EachQuantity
Address and POC Ship To DoDAAC: W41G26 CountryCode: USA
W0K4 USA OSC PINE BLUFF ARS
504TH ST BLDG 53990, CENTRAL RECEIVING SHIPPING POINT PINE BLUFF,
AR 71602-9500 UNITED STATES
Special Handling/Notes FoB Details
Party to Pay Transportation Cost: Contractor
Point Type: Destination
0002 From date of lead time event to delivery 120 Calendar Days
Date of Award DoDAAC: W41G26
1 LotQuantity
Address and POC Ship To DoDAAC: W41G26 CountryCode: USA
W0K4 USA OSC PINE BLUFF ARS
504TH ST BLDG 53990, CENTRAL RECEIVING SHIPPING POINT PINE BLUFF,
AR 71602-9500 UNITED STATES
Special Handling/Notes FoB Details
Party to Pay Transportation Cost: Contractor
Point Type: Destination
Option Line Item
Delivery Schedule Delivery On Or Before Delivery Date 29 Jul 2027
76,500 EachQuantity
Address and POC Ship To DoDAAC: W41G26 CountryCode: USA
W0K4 USA OSC PINE BLUFF ARS
504TH ST BLDG 53990, CENTRAL RECEIVING SHIPPING POINT PINE BLUFF,
AR 71602-9500 UNITED STATES
Special Handling/Notes FoB Details
Party to Pay Transportation Cost: Contractor
Point Type: Destination
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate Deviation
Variation Effective Date
52.247-34 F.o.b. Destination. 1991-01
Section G - Contract Administration Data
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate Deviation
Variation Effective Date
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.
2018-12
DFARS Clauses Incorporated by Full Text
Number Title Effective Date
Alternate Deviation
Variation Effective Date
252.232-7006 Wide Area WorkFlow Payment Instructions.
2023-01
(a) As used in this clause--Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at , 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process Electronic invoicing.
vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) , Electronic Submission of Payment Requests 252.232-7003 and Receiving Reports.
W519TC27QA013
https://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm#252.232-7003 https://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm#252.232-7003
(c) To access WAWF, the Contractor shall--WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at ; andhttps://www.sam.gov
(2) Be registered to use WAWF at following the step-by-step https://wawf.eb.mil/ procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF WAWF training.
Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web WAWF methods of document submission.
entry, Electronic Data Interchange, or File Transfer Protocol.
(f) The Contractor shall use the following information when WAWF payment instructions.
submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the Document type.
following document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items--
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
Invoice 2 in 1
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
W519TC27QA013
https://www.sam.gov/ https://wawf.eb.mil/ https://wawf.eb.mil/
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Document routing.
Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC HQ0303
Issue By DoDAAC W519TC
Admin DoDAAC W519TC
Inspect By DoDAAC W41G26
Ship To Code W41G26
Ship From Code
Mark For Code
Service Approver (DoDAAC)
Service Acceptor (DoDAAC)
Accept at Other DoDAAC
LPO DoDAAC
DCAA Auditor DoDAAC
Other DoDAAC(s)
(4) The Contractor shall ensure a payment request includes Payment request.
documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the Receiving report.
requirements of DFARS Appendix F.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
Abby Schneider, abigail.b.schneider.civ@army.mil
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
Section I - Contract Clauses
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate Deviation
Variation Effective Date
52.203-6 Restrictions on Subcontractor Sales to the Government.
2020-06
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.
2017-01
52.204-13 System for Award Management— Maintenance.
2026-02
52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded.
2026-02
52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters.
2026-02
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations.
2026-02
52.219-6 Notice of Total Small Business Set-Aside.
2026-02
52.222-3 Convict Labor. 2026-02
52.222-19 Child Labor-Cooperation with Authorities and Remedies.
2026-03
52.222-37 Employment Reports on Veterans.
2026-02
52.222-40 Notification of Employee Rights Under the National Labor Relations Act.
2026-02
52.222-90 Addressing DEI Discrimination by Federal Contractors.
2026-04
52.223-23 Sustainable Products. 2026-02
52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.
2024-05
52.232-33 Payment by Electronic Funds Transfer-System for Award Management.
2018-10
52.232-40 Providing Accelerated Payments to Small Business Subcontractors.
2023-03
52.233-3 Protest after Award. 2026-02
52.233-4 Applicable Law for Breach of Contract Claim.
2026-02
52.240-93 Basic Safeguarding of Covered Contractor Information Systems.
2026-02
52.243-1 Changes-Fixed-Price. 2026-02
52.244-6 Subcontracts for Commercial Products and Commercial Services.
2026-04
52.249-1 Termination for Convenience of the Government (Fixed-Price)
1984-04
(Short Form).
DFARS Clauses Incorporated by Reference
Date
Alternate Deviation
Variation Effective Date
252.203-7000 Requirements Relating to Compensation of Former DoD Officials.
2011-09
252.203-7002 Requirement to Inform Employees of Whistleblower Rights.
2022-12
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
2024-05
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
2023-01
252.223-7008 Prohibition of Hexavalent Chromium.
2023-01
252.225-7001 Buy American and Balance of Payments Program.
2024-02
252.225-7002 Qualifying Country Sources as Subcontractors.
2022-03
252.225-7012 Preference for Certain Domestic Commodities.
2022-04
252.225-7056 Prohibition Regarding Business 2023-01
Operations with the Maduro Regime.
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
2023-06
252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.
2023-01
252.232-7010 Levies on Contract Payments. 2006-12
252.243-7002 Requests for Equitable Adjustment.
2022-12
252.247-7023 Transportation of Supplies by Sea.
2024-10
FAR Clauses Incorporated by Full Text
Date
Alternate Deviation
Variation Effective Date
52.212-4 Terms and Conditions— Commercial Products and Commercial Services.
2026-02
As prescribed in 12.205(b)(3) , insert the following clause:
Terms and Conditions—Commercial Products and Commercial Services (Deviation Date)
(a) Definitions . The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.
(b) Inspection/Acceptance . The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—
(1) Within a reasonable time after the defect was discovered or should have been discovered;
and
(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.
(c) Assignment . The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.
C. 3727). However, when a third party makes payment ( e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.
(d) Changes . Changes in the terms and conditions of this contract may be made only by written agreement of the parties.
(e) Disputes . This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.
(f) Excusable delays . The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall—
(1) Notify the Contracting Officer in writing as soon as possible;
(2) Remedy the delay as quickly as possible; and
(3) Notify the Contracting Officer when the occurrence is over.
(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.
C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices. An invoice must include the information required by 5 CFR part 1315.9(b).
(h) Patent indemnity . The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.
(i) Payment —
(1) Items accepted . Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.
(2) Prompt payment . The Government will make payment in accordance with the Prompt Payment Act ( 31 U.S.C. 3903 ) and prompt payment regulations at 5 CFR part 1315 .
(3) Discount . In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.
(4) Overpayments . If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—
(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—
(A) Circumstances of the overpayment ( e.g. , duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);
(B) Affected contract number and delivery order number, if applicable;
(C) Affected line item or subline item, if applicable;
(D) Contractor point of contact; and
(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.
(5) Interest .
(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.
(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.
(iii) Final decisions . The Contracting Officer will issue a final decision as required by FAR part 33 if–
(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;
(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or
(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32).
(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.
(v) Amounts shall be due at the earliest of the following dates:
(A) The date fixed under this contract.
(B) The date of the first written demand for payment, including any demand for payment resulting from a termination for cause.
(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-
(A) The date on which the designated office receives payment from the Contractor;
(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or
(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.
(vii) The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract.
(j) Risk of loss . Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon—
(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or
(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.
(k) Taxes . The contract price includes all applicable Federal, State, and local taxes and duties.
(l) Termination for the Government’s convenience . The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.
(m) Termination for cause . The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.
(n) Title . Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.
(o) Warranty . The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract.
(p) Limitation of liability . Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.
(q) Compliance with laws unique to Government contracts . The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C.
chapter 87, Kickbacks; 49 U.S.C. 40118, Government-financed air transportation; and 41 U.S.
C. chapter 21 relating to procurement integrity.
(r) Order of precedence . Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:
(1) The schedule of supplies/services;
(2) The Disputes, Payments, Invoice, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;
(3) Other contract clauses incorporated in the solicitation or contract;
(4) Addenda to this solicitation or contract;
(5) Solicitation provisions incorporated in the solicitation;
(6) Other paragraphs of this clause;
(7) Other documents, exhibits, and attachments; and
(8) The specification.
(s) Unauthorized obligations .
(1) Except as stated in paragraph (s)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:
(i) Any such clause is unenforceable against the Government.
(ii) Neither the Government nor any Government-authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.
(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.
(2) Paragraph (s)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.
(t) Comptroller General examination of record . This paragraph applies if this contract was awarded using other than sealed bid procedures and is in excess of the simplified acquisition threshold on the date of award of this contract.
(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.
(2) The Contractor shall make available at its offices, at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR part 4, longer period required by statute, or periods specified in other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.
(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This clause does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.
(u) Incorporation by reference . The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.
(End of clause)
Alternate I (Deviation Date) . When contemplating a time-and-materials or labor-hour contract, substitute the following paragraphs (a), (b), (i), (l), and (m) for those in the basic clause.
(a) The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference. As used in this clause—
Direct materials means those materials that enter directly into the end product, or that are used or consumed directly in connection with the furnishing of the end product or service.
Hourly rate means the rate(s) prescribed in the contract for payment for labor that meets the labor category qualifications of a labor category specified in the contract that are—
(1) Performed by the contractor;
(2) Performed by the subcontractors; or
(3) Transferred between divisions, subsidiaries, or affiliates of the contractor under a common control.
Materials means—
(1) Direct materials, including supplies transferred between divisions, subsidiaries, or affiliates of the contractor under a common control;
(2) Subcontracts for supplies and incidental services for which there is not a labor category specified in the contract;
(3) Other direct costs (e.g., incidental services for which there is not a labor category specified in the contract, travel, computer usage charges, etc.);
(4) The following subcontracts for services which are specifically excluded from the hourly rate:
[Insert any subcontracts for services to be excluded from the hourly rates prescribed in the schedule.] ; and
(5) Indirect costs specifically provided for in this clause.
Subcontract means any contract, as defined in FAR 2.101, entered into with a subcontractor to furnish supplies or services for performance of the prime contract or a subcontract including transfers between divisions, subsidiaries, or affiliates of a contractor or subcontractor. It includes, but is not limited to, purchase orders, and changes and modifications to purchase orders.
(b) Inspection/Acceptance .
(1) The Government has the right to inspect and test all materials furnished and services performed under this contract at all places and times before acceptance. The Government will perform inspections and tests in a manner that will not unduly delay the work.
(2) If the Government performs inspection or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish and shall require subcontractors to furnish all reasonable facilities and assistance for the safe and convenient performance of these duties.
(3) Unless otherwise specified in the contract, the Government will accept or reject services and materials at the place of delivery as promptly as practicable after delivery, and they will be presumed accepted 60 days after the date of delivery, unless accepted earlier.
(4) At any time during contract performance, but not later than 6 months (or such other time as may be specified in the contract) after acceptance of the services or materials last delivered under this contract, the Government may require the Contractor to replace or correct services or materials that at time of delivery failed to meet contract requirements. Except as otherwise specified in paragraph (b)(6) of this clause, the cost of replacement or correction shall be determined under paragraph (i) of this clause, but the “hourly rate” for labor hours incurred in the replacement or correction shall be reduced to exclude that portion of the rate attributable to profit. Unless otherwise specified below, the portion of the “hourly rate” attributable to profit shall be 10 percent. The Contractor shall not tender for acceptance materials and services required to be replaced or corrected without disclosing the former requirement for replacement or correction, and, when required, shall disclose the corrective action taken. [Insert portion of labor rate attributable to profit.]
(5)(i) If the Contractor fails to proceed with reasonable promptness to perform required replacement or correction, and if the replacement or correction can be performed within the ceiling price (or the ceiling price as increased by the Government), the Government may—
(A) By contract or otherwise, perform the replacement or correction, charge to the Contractor any increased cost, or deduct such increased cost from any amounts paid or due under this contract; or
(B) Terminate this contract for cause.
(ii) Failure to agree to the amount of increased cost to be charged to the Contractor shall be a dispute under the Disputes clause of the contract.
(6) Notwithstanding paragraphs (b)(4) and (5) of this clause, the Government may, at any time, require the Contractor to remedy by correction or replacement, without cost to the Government, any failure by the Contractor to comply with the requirements of this contract, if the failure is due to—
(i) Fraud, lack of good faith, or willful misconduct on the part of the Contractor’s managerial personnel; or
(ii) The conduct of one or more of the Contractor’s employees selected or retained by the Contractor after any of the Contractor’s managerial personnel has reasonable grounds to believe that the employee is habitually careless or unqualified.
(7) This clause applies in the same manner and to the same extent to corrected or replacement materials or services as to materials and services originally delivered under this contract.
(8) The Contractor has no obligation or liability under this contract to correct or replace materials and services that at time of delivery do not meet contract requirements, except as provided in this clause or as may be otherwise specified in the contract.
(9) Unless otherwise specified in the contract, the Contractor’s obligation to correct or replace Government-furnished property shall be governed by the clause pertaining to Government property.
(i) Payments .
(1) Work performed . The Government will pay the Contractor as follows upon the submission of commercial invoices approved by the Contracting Officer:
(i) Hourly rate .
(A) The amounts shall be computed by multiplying the appropriate hourly rates prescribed in the contract by the number of direct labor hours performed. Fractional parts of an hour shall be payable on a prorated basis.
(B) The rates shall be paid for all labor performed on the contract that meets the labor qualifications specified in the contract. Labor hours incurred to perform tasks for which labor qualifications were specified in the contract will not be paid to the extent the work is performed by individuals that do not meet the qualifications specified in the contract, unless specifically authorized by the Contracting Officer.
(C) Invoices may be submitted once each month (or at more frequent intervals, if approved by the Contracting Officer) to the Contracting Officer or the authorized representative.
(D) When requested by the Contracting Officer or the authorized representative, the Contractor shall substantiate invoices (including any subcontractor hours reimbursed at the hourly rate in the schedule) by evidence of actual payment, individual daily job timecards, records that verify the employees meet the qualifications for the labor categories specified in the contract, or other substantiation specified in the contract.
(E) Unless the Schedule prescribes otherwise, the hourly rates in the Schedule shall not be varied by virtue of the Contractor having performed work on an overtime basis.
( 1 ) If no overtime rates are provided in the Schedule and the Contracting Officer approves overtime work in advance, overtime rates shall be negotiated.
( 2 ) Failure to agree upon these overtime rates shall be treated as a dispute under the Disputes clause of this contract.
( 3 ) If the Schedule provides rates for overtime, the premium portion of those rates will be reimbursable only to the extent the overtime is approved by the Contracting Officer.
(ii) Materials .
(A) If the Contractor furnishes materials that meet the definition of a commercial product at FAR 2.101, the price to be paid for such materials shall not exceed the Contractor’s established catalog or market price, adjusted to reflect the—
( 1 ) Quantities being acquired; and
( 2 ) Any modifications necessary because of contract requirements.
(B) Except as provided for in paragraph (i)(1)(ii)(A) and (D)(2) of this clause, the Government will reimburse the Contractor the actual cost of materials (less any rebates, refunds, or discounts received by the contractor that are identifiable to the contract) provided the Contractor—
( 1 ) Has made payments for materials in accordance with the terms and conditions of the agreement or invoice; or
( 2 ) Makes these payments within 30 days of the submission of the Contractor’s payment request to the Government and such payment is in accordance with the terms and conditions of the agreement or invoice.
(C) To the extent able, the Contractor shall—
( 1 ) Obtain materials at the most advantageous prices available with due regard to securing prompt delivery of satisfactory materials;…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .