B08 W519TC27RA006 0002.pdf
PDF 4 MB Posted
- Attached to
- Lifting Pull Strap
- Solicitation number
- W519TC27
About this file
This is Amendment 0002 to Solicitation W519TC-27-RA006, issued by Army Contracting Command - Rock Island (ACC-RI) on November 16, 2026, to answer vendor questions regarding a Lifting Pull Strap procurement. The solicitation is for a five-year, Firm Fixed Price Indefinite Delivery Indefinite Quantity (IDIQ) contract issued under FAR Part 15 (Contracting by Negotiation) and NAICS 314994 (Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills). The requirement includes CLIN 0001 for Lifting Pull Strap M930 with a maximum quantity of 59,500 units and CLIN 0002 for First Article Test (FAT) with a maximum of 1 lot (15 units). The guaranteed minimum is 13,500 units under CLIN 0001, obligated through the first delivery order awarded simultaneously with the base contract. The award will be made to the offeror submitting the lowest-priced technically acceptable proposal. Proposals must remain valid for 60 days after receipt and be submitted via email by November 23, 2026, at 10:00 AM CST to Heather Johns (Primary Contract Specialist) and Michelle M. Lund (Contracting Officer). Pricing must be submitted using a completed Price Matrix (Attachment 0001) for FOB origin delivery, with separate pricing for FAT CLINs.
Delivery of the initial production quantity is due 120 days after the executed delivery order, with inspection and acceptance at destination at Pine Bluff Arsenal (Central Shipping and Receiving Point, Building 53-990, 506th Street, Pine Bluff, AR 71602). FAT is required 60 days after contract date and must include material certifications for webbing and thread, with test data required per MIL-W-4088. All boxes must be labeled with manufacturer, contract number, item nomenclature, drawing number, lot number, and quantity. The five ordering periods span the full five-year contract term in approximately 365-day increments. The drawings are restricted and require certification through the US/Canada Joint Certification Program with a certified DD Form 2345 to access via SAM.gov. Contractors must be registered in the System for Award Management (SAM) and comply with applicable security and export control requirements, including CUI marking and distribution statement protocols. Electronic invoicing will be used for payment via DFAS using Wide Area Workflow (WAWF), and a DD250 form is required. Amendment 0002 adds Attachment 0004 (Pull Strap Questions) to address vendor inquiries, with the primary point of contact being Heather Johns at heather.b.johns.civ@army.mil.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 0004 Pull Strap Questions.pdf | ||
| B08 W519TC27RA006 0001.pdf | ||
| A03 Attachment 0004 - MIL-W-4088.pdf | ||
| A03 Attahcment 0003 - ASTM D6193.pdf | ||
| B08 Solicitation - W519TC27RA006 Final.pdf | ||
| B08 Attachment 0001-Price Matrix Pull Strap IDIQ.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.
If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER
NUMBER IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
15C. DATE SIGNED 16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
16C. DATE SIGNED
Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES
2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)
6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE
8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NUMBER
10B. DATED (SEE ITEM 13)
CODE FACILITY CODE
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
Section A - Solicitation/Contract Form
The following changes have been made:
Miscellaneous text in this section has been modified from:
AMENDMENT 0001 NARRATIVE
The purpose of Amendment P0001 is for the following:
1. Answer question to industry on the Q&A Sheet.
2. Update POC information. Contract Specialist change from Heather Johns to Abby Schneider, abigail.b.schneider.civ@army.mil.
3. Addition of Attachment 0005 photograph of Pull Strap.
Q&A SHEET
Q: Drawings: One view shows no fold on the webbing, while the other shows it as a fold. Please advise if there is a fold or not.
A: There is a fold. The end of the strap gets folded underneath itself and stitched twice. See attached.
1. Army Contracting Command - Rock Island (ACC-RI) hereby issues Solicitation W519TC-27- RA006 for Lifting Pull Strap. This solicitation is issued in accordance with (IAW) Revolutionary Federal Acquisition Regulation Overhaul (RFO FAR) Part 15 - Contracting by Negotiation. This solicitation will be awarded to the Offeror whose proposal is responsible and adheres to all the terms and conditions of the solicitation with the lowest priced technically acceptable.
2. This solicitation will result in a five (5) year, Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract to the offeror whose proposal is responsible and adheres to all the terms
W519TC27RA0060002
and conditions of the solicitation with the lowest priced technically acceptable proposal. This requirement is issued under NAICS 314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills.
3. Offerors are cautioned to ensure their proposal is fully completed , including all fill -ins and blanks in the RFP. Any offeror submitting a proposal agrees by submission that their proposal and the prices contained therein will be valid for 60 days after receipt of final proposals. Offerors are to provide proposals IAW Section L- Instructions to Offerors. Proposals will be evaluated IAW Section M- Evaluation Factors for award.
4. The Government's only obligation under the subsequent contract is for the guaranteed minimum of 13,500 each (ea.) of Lifting Pull Straps. The minimum guaranteed will be obligated by the first delivery order awarded simultaneously with the base IDIQ contract. All other quantities are estimates only, and do not bind the Government in any way to include, but not limited to, quantities listed in this solicitation. The maximum quantity for the resulting contract is 59,500 ea. Lifting Pull Straps.
5. The Ordering Periods are provided below: (actual dates will be provided at the time of award)
Ordering Period 1: Award Date - 365 Days After Award (DAA)
Ordering Period 2: 366 DAA - 731 DAA
Ordering Period 3: 732 DAA - 1,097 DAA
Ordering Period 4: 1,098 DAA - 1,463 DAA
Ordering Period 5: 1,464 DAA - 1,829 DAA
6. The Contract Line-Item Numbers (CLINs) are as follows:
CLIN 0001 -Lifting Pull Strap, M930, Maximum Qty 59,500
CLIN 0002 - First Article Test, Maximum QTY 1 LOT (15 each)
7. The guaranteed minimums are as follows:
CLIN 0001-8,000
ADDITIONAL INFORMATION
1 Lot (15 each) FAT required along with material certifications for webbing and thread. Each lot supplied to PBA should be accompanied with these documents. Each box must be labeled with Manufacturer, Contract Number, Item Nomenclature, End Item (120mm), Drawing Number, Lot Number and Quantity. Test data required for the webbing IAE MIL-W-4088.
The minimum guarantee will be obligated by the first delivery order award simultaneously with the base IDIQ contract. All other guarantees are estimates only, and do not bind the U.S. Government in any way to include, but not limited to, quantities listed in the solicitation.
8. Price Matrix- The Offeror must submit a completed Price Matrix at Attachment 0001 in section J.
the pricing submitted in the Price Matrix must be fully executable by the U.S. Government at the unit price and quantity range limits specified in the Price Matrix. Prices are for FOB origin.
Separately priced FATR CLINs must also be completed for each items.
9. The total quantity of each subcomponent will be determine the applicable range of unit pricing for each OP, as set forth in the Price Matrix at attachment 0001 in Section J.
10. A First Article Test (FAT) is required. FAT is due sixty (60 day after date of contract.s) FAT instructions are listed within the CLIN detail under FAT CLINS. Offerors will be notified by Government once FAT is approved.
11. Initial delivery of production quantity is due after executed delivery order.120 days ACC-RI, Pine Bluff Arsenal and the contractor will agree upon a delivery schedule at time of delivery order execution.
12. The Government is under no obligation to place subsequent orders after award of the guaranteed minimum quantity. Units of the minimum guaranteed first delivery order may be deliveries as early as available at no additional cost to the Government. All forthcoming delivery orders may allow early delivery at the discretion of the Contracting Officer.
13. Inspection and Acceptance/Delivery of the Lifting Pull Straps, CLIN 0001 and CLIN 0002 will be done at Destination.
FOB Point is Destination at Pine Bluff Arsenal
Pine Bluff Arsenal (PBA)
Central Shipping and Receiving Point (CSRP)
Bldg 53-990, 506th Street
Pine Bluff, AR 71602
14. Contractor questions regarding the solicitation and drawings are due no later than 12 November 2026 pm CST, to ensure that all questions can be answered and posted for all Offeror's knowledge prior to solicitation closing. All questions should be directed in writing to Heather Johns at heather.b.johns.civ@army.mil, and Michelle Lund at michelle.m.lund3.civ@army.mil, providing RFQ number, W519TC-27-R-A006 in the subject line.
15. The completed package will be submitted by emailing the Primary Contract Specialist (CS) Heather Johns at heather.b.johns.civ@army.mil and Contracting Officer, Michelle M. Lund at
W519TC27RA0060002
mailto:heather.b.johns.civ@army.mil mailto:michelle.m.lund3.civ@army.mil michelle.m.lund3.civ@army.mil before 10:00 AM CST on 23 November 2026. Contractor is to provide a signed copy of the solicitation and all its amendments if applicable.
16. This Executive Summary is provided for administrative assistance only and is not intended to alter the terms and conditions of the contract in any manner. Provisions of this solicitation and technical date must prevail over this Executive Summary.
17. NOTES:
a. Contract will be awarded in accordance with FAR 15 to the responsive and responsible contractor that is the best value that is determined fair and reasonable and meets the terms and conditions of the solicitation.
b. Contractor is liable for accuracy of submitting proposal and for any incurred costs if proposal was submitted erroneously.
c. Electronic Invoicing Instructions must be provided at the time of award. A DD250 will be required.
d. Proposals submitted in response to this solicitation must remain valid for 60 days.
e. Contractors must be registered in the System for Award Management (SAM) in order to be eligible for an award with the U.S. Government.
18. For the contract resulting from the solicitation, the payment will be made by DFAS, via Wide Area Workflow (WAWF).
19. Although the Government intends to award the resultant contract without negotiations, the Government reserves the right to open negotiations.
20. For contractors that do not require CAC but require access to a DoD facility or installation.
Contract and all associated sub-contractors employees must comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC- III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.
21. The drawings for this requirement are restricted. A link to the drawings will be provided on Sam.gov via Solicitation W519TC-27-R-A006. Contactors must have a SAM.gov account prior to accessing any TDP(s). You may request the drawings however, due to export restrictions, you must first be certified with US/Canada Joint Certification Program and obtain a certified DD Form 2345. To obtain certification, you may go to the website at https://www.logisticsinformationservice.
dla.mil/PublicHome/jcp/default.aspx. Once certified, the data custodian listed on your company's certified DD Form 2345 must submit the request for TDP access in FBO using the link provided.
The data custodian must also be the one to complete the Non-Disclosure Agreement. Please allow 2-3 working days to process your request. To expedite the review process, please ensure you include your CAGE Code in the reasoning box. You will receive a system generated email from SAM.Gov stating you have been granted permission for viewing or downloading the drawings provided.
a. Drawings and associated data such as specifications and safety data sheets of the subject TDP have been reviewed and are deemed certified for use in procurement with the recommendation to provide the following directives to prospective bidders regarding distribution, security, export control and destruction, which complete drawings missing this information or replace existing information on drawings that conflicts with this information:
Distribution: Drawings are to be handled and distributed in accordance with DoDI 5200.48, DoDI 5230.24, DoDD 5230.25 and DoDI 2040.02' Any distribution of individual drawings to potential subcontractors must be only to Qualified Contractors as specified in DoDD 5230.25 with a current DLA certified DD form 2345s and must include the required "NOTICE TO ACCOMPANY THE DISSEMINATION OF EXPORT-CONTROLLED TECHNICAL DATA" of DoDD 5230.25. The drawings are to be considered to have the distribution statement added or updated to: "Distribution Statement D. Distribution authorized to the Department of Defense and U.S. DOD Contractors Only:
Export Controlled, CTI, Critical Technology; DATE of Determination: YY-MM-DD. Other requests for this document must be referred to: U.S. ARMY DEVCOM CBC (for CAGE CODE 81361) or U.
S. ARMY DEVCOM AC (for CAGE CODES 19200 & 19203). Unless marked with "Distribution A", CAGE CODE 19200 and 19203 drawings are to be handled and distributed the same as CAGE CODE 81361 drawings, and, until superseded by any next revision drawings with update control markings, must be considered to have the same markings as 81361 drawings.
Hazardous Component Safety Data Statements are to be considered to have the distribution statement added or updated to: "Distribution Statement C. Distribution authorized to U.S.
Government Agencies and their contractors, CTI, Date of Determination; YY-MM-DD . Other requests for this document must be referred to U.S. Army DEVCOM CBC (for CAGE CODE 81361) or U.S. Army DEVCOM AC (for CAGE CODES 19200 & 19203)."
b. Security: Drawings are to be considered to have the marking "CUI" updated or added at the top and bottom of the drawing and the following CUI Determination Indicator box added or updated at the bottom of the drawing: "Controlled By: DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203) CUI Categories: CTI, EXPT Distribution Statement: D
POC: DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203)"
Hazardous Component Safety Data Statements are to be considered to have the marking "CUI" updated or added at the top and bottom of the statement and the following CUI Determination Indicator box added or updated at the bottom of the drawing:, and CUI Determination Indicator added or updated at the bottom of the statement: "Controlled By: US ARMY Controlled By:
DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203)CUI Categories: CTI Distribution Statement: C
POC: DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203)"
c. Export Control: The drawings are to be considered to have the Export Control Warning added or updated to: "WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02."
d. Destruction: The drawings are to be considered to have the destruction notice added or updated to: "Destruction Notice - Destroy by any means approved for destroying classified information or by any other means making the information unreadable, indecipherable, and unrecoverable, such as those identified in NIST SP 800-88 and in accordance with section 2002.14(f) of title 32, CFR."
Destruction by unsuccessful bidders should occur immediately after notification of an unsuccessful bid, while successful bidders should destroy provided documents upon completion of their contract.
22. This Executive Summary is provided for administrative assistance only and is not intended to alter the terms and conditions of the contract in any manner. Provisions of this solicitation and technical data must prevail over this executive summary.
23. The point of contact for this action is Heather Johns, at heather.b.johns.civ@army.mil.
ADDITIONAL INFORMATION
NON-RELEASE OF CONTRACT INFORMATION
1. Any proprietary, confidential commercial, trade secret or similar type of information in the contract resulting from this solicitation may not be released to anyone outside the Government.
2. Do not release proprietary, confidential commercial, trade secret or similar type of information from this contract to anyone inside the Government that does not have a legitimate need to know the information.
3. If in doubt about what information in the contract may be released, contact the Contracting Officer.
4. Criminal penalties are provided by 18 U.S.C. for the improper release of proprietary and/or confidential commercial information.
DISCLOUSRE OF UNIT PRICE INFORMATION
This constitutes notification pursuant to Executive Order 12600, Pre-Disclosure Notification Procedures for Confidential Commercial Information (June 23,1987), of our intention to release unit prices of the awardee in response to any request under the Freedom of Information Act, 5
W519TC27RA0060002
mailto:johns.civ@army.mil
USC 552. Unit price is defined as the contract price per unit or item purchased. We consider any objection to be waived unless the Contracting Officer is notified of your objection to such release prior to submission of initial quotes.
To:
AMENDMENT 0002 NARRATIVE
The purpose of Amendment P0002 is for the following:
1. Answer questions to industry in Attachment 0004 Pull Strap Questions.
All other terms, conditions, and schedules remain unchanged.
The points of contact for this effort are Abby Schneider, Contract Specialist, at abigail.b.schneider.
civ@army.mil and Michelle Lund, Procuring Contracting Officer, michelle.m.lund3.civ@army.mil.
AMENDMENT 0001 NARRATIVE
The purpose of Amendment P0001 is for the following:
1. Answer question to industry on the Q&A Sheet.
2. Update POC information. Contract Specialist change from Heather Johns to Abby Schneider, abigail.b.schneider.civ@army.mil.
3. Addition of Attachment 0005 photograph of Pull Strap.
Q&A SHEET
Q: Drawings: One view shows no fold on the webbing, while the other shows it as a fold. Please advise if there is a fold or not.
A: There is a fold. The end of the strap gets folded underneath itself and stitched twice. See attached.
1. Army Contracting Command - Rock Island (ACC-RI) hereby issues Solicitation W519TC-27- RA006 for Lifting Pull Strap. This solicitation is issued in accordance with (IAW) Revolutionary Federal Acquisition Regulation Overhaul (RFO FAR) Part 15 - Contracting by Negotiation. This solicitation will be awarded to the Offeror whose proposal is responsible and adheres to all the terms and conditions of the solicitation with the lowest priced technically acceptable.
2. This solicitation will result in a five (5) year, Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract to the offeror whose proposal is responsible and adheres to all the terms and conditions of the solicitation with the lowest priced technically acceptable proposal. This requirement is issued under NAICS 314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills.
3. Offerors are cautioned to ensure their proposal is fully completed , including all fill -ins and blanks in the RFP. Any offeror submitting a proposal agrees by submission that their proposal and the prices contained therein will be valid for 60 days after receipt of final proposals. Offerors are to provide proposals IAW Section L- Instructions to Offerors. Proposals will be evaluated IAW Section M- Evaluation Factors for award.
4. The Government's only obligation under the subsequent contract is for the guaranteed minimum of 13,500 each (ea.) of Lifting Pull Straps. The minimum guaranteed will be obligated by the first delivery order awarded simultaneously with the base IDIQ contract. All other quantities are estimates only, and do not bind the Government in any way to include, but not limited to, quantities listed in this solicitation. The maximum quantity for the resulting contract is 59,500 ea. Lifting Pull Straps.
5. The Ordering Periods are provided below: (actual dates will be provided at the time of award)
Ordering Period 1: Award Date - 365 Days After Award (DAA)
Ordering Period 2: 366 DAA - 731 DAA
Ordering Period 3: 732 DAA - 1,097 DAA
Ordering Period 4: 1,098 DAA - 1,463 DAA
Ordering Period 5: 1,464 DAA - 1,829 DAA
6. The Contract Line-Item Numbers (CLINs) are as follows:
CLIN 0001 -Lifting Pull Strap, M930, Maximum Qty 59,500
CLIN 0002 - First Article Test, Maximum QTY 1 LOT (15 each)
7. The guaranteed minimums are as follows:
CLIN 0001-8,000
ADDITIONAL INFORMATION
1 Lot (15 each) FAT required along with material certifications for webbing and thread. Each lot supplied to PBA should be accompanied with these documents. Each box must be labeled with Manufacturer, Contract Number, Item Nomenclature, End Item (120mm), Drawing Number, Lot Number and Quantity. Test data required for the webbing IAE MIL-W-4088.
The minimum guarantee will be obligated by the first delivery order award simultaneously with the base IDIQ contract. All other guarantees are estimates only, and do not bind the U.S. Government in any way to include, but not limited to, quantities listed in the solicitation.
8. Price Matrix- The Offeror must submit a completed Price Matrix at Attachment 0001 in section J.
the pricing submitted in the Price Matrix must be fully executable by the U.S. Government at the unit price and quantity range limits specified in the Price Matrix. Prices are for FOB origin.
Separately priced FATR CLINs must also be completed for each items.
9. The total quantity of each subcomponent will be determine the applicable range of unit pricing for each OP, as set forth in the Price Matrix at attachment 0001 in Section J.
10. A First Article Test (FAT) is required. FAT is due sixty (60 day after date of contract.s) FAT instructions are listed within the CLIN detail under FAT CLINS. Offerors will be notified by Government once FAT is approved.
11. Initial delivery of production quantity is due after executed delivery order.120 days ACC-RI, Pine Bluff Arsenal and the contractor will agree upon a delivery schedule at time of delivery order execution.
12. The Government is under no obligation to place subsequent orders after award of the guaranteed minimum quantity. Units of the minimum guaranteed first delivery order may be deliveries as early as available at no additional cost to the Government. All forthcoming delivery orders may allow early delivery at the discretion of the Contracting Officer.
13. Inspection and Acceptance/Delivery of the Lifting Pull Straps, CLIN 0001 and CLIN 0002 will be done at Destination.
FOB Point is Destination at Pine Bluff Arsenal
Pine Bluff Arsenal (PBA)
Central Shipping and Receiving Point (CSRP)
Bldg 53-990, 506th Street
Pine Bluff, AR 71602
14. Contractor questions regarding the solicitation and drawings are due no later than 12 November 2026 pm CST, to ensure that all questions can be answered and posted for all Offeror's knowledge prior to solicitation closing. All questions should be directed in writing to Heather Johns at heather.b.johns.civ@army.mil, and Michelle Lund at michelle.m.lund3.civ@army.mil, providing RFQ number, W519TC-27-R-A006 in the subject line.
15. The completed package will be submitted by emailing the Primary Contract Specialist (CS) Heather Johns at heather.b.johns.civ@army.mil and Contracting Officer, Michelle M. Lund at michelle.m.lund3.civ@army.mil before 10:00 AM CST on 23 November 2026. Contractor is to provide a signed copy of the solicitation and all its amendments if applicable.
16. This Executive Summary is provided for administrative assistance only and is not intended to alter the terms and conditions of the contract in any manner. Provisions of this solicitation and technical date must prevail over this Executive Summary.
17. NOTES:
a. Contract will be awarded in accordance with FAR 15 to the responsive and responsible contractor that is the best value that is determined fair and reasonable and meets the terms and conditions of the solicitation.
b. Contractor is liable for accuracy of submitting proposal and for any incurred costs if proposal was submitted erroneously.
c. Electronic Invoicing Instructions must be provided at the time of award. A DD250 will be required.
d. Proposals submitted in response to this solicitation must remain valid for 60 days.
e. Contractors must be registered in the System for Award Management (SAM) in order to be eligible for an award with the U.S. Government.
18. For the contract resulting from the solicitation, the payment will be made by DFAS, via Wide Area Workflow (WAWF).
19. Although the Government intends to award the resultant contract without negotiations, the Government reserves the right to open negotiations.
20. For contractors that do not require CAC but require access to a DoD facility or installation.
Contract and all associated sub-contractors employees must comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC- III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.
W519TC27RA0060002
mailto:heather.b.johns.civ@army.mil mailto:michelle.m.lund3.civ@army.mil
21. The drawings for this requirement are restricted. A link to the drawings will be provided on Sam.gov via Solicitation W519TC-27-R-A006. Contactors must have a SAM.gov account prior to accessing any TDP(s). You may request the drawings however, due to export restrictions, you must first be certified with US/Canada Joint Certification Program and obtain a certified DD Form 2345. To obtain certification, you may go to the website at https://www.logisticsinformationservice.
dla.mil/PublicHome/jcp/default.aspx. Once certified, the data custodian listed on your company's certified DD Form 2345 must submit the request for TDP access in FBO using the link provided.
The data custodian must also be the one to complete the Non-Disclosure Agreement. Please allow 2-3 working days to process your request. To expedite the review process, please ensure you include your CAGE Code in the reasoning box. You will receive a system generated email from SAM.Gov stating you have been granted permission for viewing or downloading the drawings provided.
a. Drawings and associated data such as specifications and safety data sheets of the subject TDP have been reviewed and are deemed certified for use in procurement with the recommendation to provide the following directives to prospective bidders regarding distribution, security, export control and destruction, which complete drawings missing this information or replace existing information on drawings that conflicts with this information:
Distribution: Drawings are to be handled and distributed in accordance with DoDI 5200.48, DoDI 5230.24, DoDD 5230.25 and DoDI 2040.02' Any distribution of individual drawings to potential subcontractors must be only to Qualified Contractors as specified in DoDD 5230.25 with a current DLA certified DD form 2345s and must include the required "NOTICE TO ACCOMPANY THE DISSEMINATION OF EXPORT-CONTROLLED TECHNICAL DATA" of DoDD 5230.25. The drawings are to be considered to have the distribution statement added or updated to: "Distribution Statement D. Distribution authorized to the Department of Defense and U.S. DOD Contractors Only:
Export Controlled, CTI, Critical Technology; DATE of Determination: YY-MM-DD. Other requests for this document must be referred to: U.S. ARMY DEVCOM CBC (for CAGE CODE 81361) or U.
S. ARMY DEVCOM AC (for CAGE CODES 19200 & 19203). Unless marked with "Distribution A", CAGE CODE 19200 and 19203 drawings are to be handled and distributed the same as CAGE CODE 81361 drawings, and, until superseded by any next revision drawings with update control markings, must be considered to have the same markings as 81361 drawings.
Hazardous Component Safety Data Statements are to be considered to have the distribution statement added or updated to: "Distribution Statement C. Distribution authorized to U.S.
Government Agencies and their contractors, CTI, Date of Determination; YY-MM-DD . Other requests for this document must be referred to U.S. Army DEVCOM CBC (for CAGE CODE 81361) or U.S. Army DEVCOM AC (for CAGE CODES 19200 & 19203)."
b. Security: Drawings are to be considered to have the marking "CUI" updated or added at the top and bottom of the drawing and the following CUI Determination Indicator box added or updated at the bottom of the drawing: "Controlled By: DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203) CUI Categories: CTI, EXPT Distribution Statement: D
POC: DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203)"
Hazardous Component Safety Data Statements are to be considered to have the marking "CUI" updated or added at the top and bottom of the statement and the following CUI Determination Indicator box added or updated at the bottom of the drawing:, and CUI Determination Indicator added or updated at the bottom of the statement: "Controlled By: US ARMY Controlled By:
DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203)CUI Categories: CTI Distribution Statement: C
POC: DEVCOM CBC (for CAGE CODE 81361) or DEVCOM AC (for CAGE CODES 19200 & 19203)"
c. Export Control: The drawings are to be considered to have the Export Control Warning added or updated to: "WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02."
d. Destruction: The drawings are to be considered to have the destruction notice added or updated to: "Destruction Notice - Destroy by any means approved for destroying classified information or by any other means making the information unreadable, indecipherable, and unrecoverable, such as those identified in NIST SP 800-88 and in accordance with section 2002.14(f) of title 32, CFR."
Destruction by unsuccessful bidders should occur immediately after notification of an unsuccessful bid, while successful bidders should destroy provided documents upon completion of their contract.
22. This Executive Summary is provided for administrative assistance only and is not intended to alter the terms and conditions of the contract in any manner. Provisions of this solicitation and technical data must prevail over this executive summary.
23. The point of contact for this action is Heather Johns, at heather.b.johns.civ@army.mil.
ADDITIONAL INFORMATION
NON-RELEASE OF CONTRACT INFORMATION
1. Any proprietary, confidential commercial, trade secret or similar type of information in the contract resulting from this solicitation may not be released to anyone outside the Government.
2. Do not release proprietary, confidential commercial, trade secret or similar type of information from this contract to anyone inside the Government that does not have a legitimate need to know the information.
3. If in doubt about what information in the contract may be released, contact the Contracting Officer.
W519TC27RA0060002
mailto:johns.civ@army.mil
4. Criminal penalties are provided by 18 U.S.C. for the improper release of proprietary and/or confidential commercial information.
DISCLOUSRE OF UNIT PRICE INFORMATION
This constitutes notification pursuant to Executive Order 12600, Pre-Disclosure Notification Procedures for Confidential Commercial Information (June 23,1987), of our intention to release unit prices of the awardee in response to any request under the Freedom of Information Act, 5 USC 552. Unit price is defined as the contract price per unit or item purchased. We consider any objection to be waived unless the Contracting Officer is notified of your objection to such release prior to submission of initial quotes.
Section J - List of Attachments
The attachments table has changed from:
Identifie r
Document Name
Document Description Reference Identifier
Date Line Item Page N umbers
Docum ent Type
Provide d Under Separat e Cover
0004 Attachment 0004 Pull Strap Questions
Questions for Industry 16 Nov
Attach ment
No
To:
Identifie r
Document Name
Document Description Reference Identifier
Date Line Item Page N umbers
Docum ent Type
Provide d Under Separat e Cover
0004 Attachment 0004 Pull Strap Questions
Questions for Industry 16 Nov
Attach ment
No
The following contract documents were added:
Attachment 0004 Pull Strap Questions
The following contract documents Page Counts were changed:
DOCUMENT PAGE COUNTS
DOCUMENT NAME FROM TO
Attachment 0004 Pull Strap Questions none
| IDCode: J |
| Page: 1 |
| Pages: 15 |
| AmendNo: 0002 |
| EffDate: 16 NOV 2026 |
| ReqNo: |
| ProjNo: |
| IssCode: W519TC |
| AdmCode: |
| IssuedBy: W6QK ACC-RI |
ACC ROCK ISLAND BLDG 60, 3055 RODMAN AVE
ROCK ISLAND, IL 61299-0000
UNITED STATES
ABIGAIL SCHNEIDER, EMAIL: ABIGAIL.B.SCHNEIDER.CIV@ARMY.MIL TELEPHONE: 5207151205
AdminBy:
SCD: PAS:
| ContractorNameAdd: |
| Code: |
| FacCode: |
| SolChg: 1 |
| SolNo: W519TC27RA006 |
| SolDate: 21 OCT 2026 |
| AwardChg: Off |
| AwardNo: |
| AwardDate: |
| Amended: 1 |
| OffrExt: Off |
| OffrNoEx: 1 |
| NoCopies: 1 |
| ApprData: SEE SECTION G - CONTRACT ADMINISTRATION DATA |
| ChgeOrd: Off |
| ChgeOrder: |
| Modify: Off |
| SuppAgre: Off |
| SuppAuth: |
| ModOthr: Off |
| OthrSpec: |
| NoReq: Off |
| Require: Off |
| Copies: |
| Descript: The purpose of this amendment is to answer vendor questions. |
| ContNameTitle: |
| CoNameTitle: MICHELLE M. LUND |
| ContDate: |
| CODate: 17 NOV 2026 |
File details come from the government source that posted it. Updated .