W519TC23Q2072_0001.pdf

SEE SCHEDULE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amendment to update the requirement, CLIN descriptions and add variance clause. No further changes.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 22-Dec-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W519TC23Q2072

X 9B. DATED (SEE ITEM 11)

20-Dec-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

22-Dec-2022

CODE

ARMY CONTRACTING COMMAND - ROCK ISLAND

3055 RODMAN AVE

ROCK ISLAND IL 61299

W519TC 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W519TC23Q2072

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

RUNNER,PALLET, USED ON MK 79 PALLETS PER MCAAP DRAWING #1511AS201 REV G PAGE 1 OF 3, 1151AS201 REVISION C PAGE 2 OF 3 AND 1511AS201 REVISION C PAGE 3 OF 3 ITEM NUMBER 1.

MANUFACTURED FROM ASTM A1011/A1011M 10 GAGE HOT ROLLED STEEL, WITH 1.25 HOLES. ALL MATERIAL MUST HAVE MILL TEST REPORTS MUST BE FREE OF PAINT HAVE LIGHT TO NO RUST, BE TRANSPORTED COVERED, ALL DRAWING DIMENSIONAL TOLERANCES APPLY. CERTIFICATE

OF CONFORMANCE REQUIRED TO ABOVE SPECIFICATIONS FOB MCALESTER, OKLAHOMA * See qualifying statement and item description for detail.

____________________________________________________________ Technical specifications MUST BE MET Technical Detail: MUST BE SUBMITTED with bid to be considered MUST BE SAM registered

To:

MK79 PALLET RUNNER MCAAP DRAWINGS- 1511AS201 REVISION G (PAGE 1 OF 3), 1151AS201

REVISION C (PAGE 2 OF 3) AND 1511AS201 REVISION C (PAGE 3 OF 3). ITEM NUMBER 1.

MANUFACTURED FROM ASTM A1011/A1011M (10 GAUGE) HOT ROLLED STEEL, WITH 1.25 HOLES.

ALL MATERIAL MUST HAVE- MILL TEST REPORTS, FREE OF PAINT, LIGHT TO NO RUST,

TRANSPORTED COVERED. ALL DRAWING DIMENSIONAL TOLERANCES APPLY. CERTIFICATE OF

CONFORMANCE (REQUIRED TO ABOVE SPECIFICATIONS)FOB MCALESTER, OKLAHOMA * See requirement for additional detail. ____________________________________________________________ Technical specifications MUST BE MET Technical Detail: MUST BE SUBMITTED with bid to be considered MUST BE SAM registered

CLIN 0002

The CLIN extended description has changed from:

RUNNER,PALLET, USED ON MK 79 PALLETS PER MCAAP DRAWING #1511AS201 REV G PAGE 1 OF 3, 1151AS201 REVISION C PAGE 2 OF 3 AND 1511AS201 REVISION C PAGE 3 OF 3 ITEM NUMBER 1.

MANUFACTURED FROM ASTM A1011/A1011M 10 GAGE HOT ROLLED STEEL. ALL MATERIAL MUST

HAVE MILL TEST REPORTS MUST BE FREE OF PAINT HAVE LIGHT TO NO RUST, BE TRANSPORTED

COVERED, ALL DRAWING DIMENSIONAL TOLERANCES APPLY. CERTIFICATE OF CONFORMANCE

REQUIRED TO ABOVE SPECIFICATIONS FOB MCALESTER, OKLAHOMA * See qualifying statement and item description for detail. ____________________________________________________________ Technical specifications MUST BE MET Technical Detail: MUST BE SUBMITTED with bid to be considered MUST BE SAM registered

To:

MK79 PALLET RUNNER MCAAP DRAWING 1511AS201 REVISION G (PAGE 1 OF 3), 1151AS201

REVISION C (PAGE 2 OF 3) AND 1511AS201 REVISION C (PAGE 3 OF 3) ITEM NUMBER 1.

MANUFACTURED FROM ASTM A1011/A1011M (10 GAUGE) HOT ROLLED STEEL. ALL MATERIAL

MUST HAVE- MILL TEST REPORTS, FREE OF PAINT, LIGHT TO NO RUST, TRANSPORTED COVERED.

ALL DRAWING DIMENSIONAL TOLERANCES APPLY. CERTIFICATE OF CONFORMANCE (REQUIRED

TO ABOVE SPECIFICATIONS)FOB MCALESTER, OKLAHOMA * See requirement for additional detail.

____________________________________________________________ Technical specifications MUST BE MET Technical Detail: MUST BE SUBMITTED with bid to be considered MUST BE SAM registered

The following have been added by full text:

52.211-16 VARIATION IN QUANTITY (APR 1984)

(a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below.

(b) The permissible variation shall be limited to:

10% Percent increase 0% Percent decrease This increase or decrease shall apply to CLIN 0001, CLIN 0002.

(End of clause)

The following have been modified:

REQUIREMENTS

SPECIFICATIONS & SHIPMENT INSTRUCTIONS

PRIOR TO EACH LARGE SHIPMENT THE BELOW INSTRUCTION MUST BE FOLLOWED:

- ITEMS SHALL CONFORM TO MCAAP DRAWING - 1511AS201 REVISION G (PAGE 1 OF 3), 1151AS201

REVISION C (PAGE 2 OF 3) AND 1511AS201 REVISION C (PAGE 3 OF 3). ITEM NUMBER 1.

ALL DRAWING DIMENSIONAL TOLERANCES APPLY.

- MUST BE FREE OF PAINT, LIGHT TO NO RUST, AND BE TRANSPORTED COVERED.

- MUST PROVIDE MILL TEST REPORTS/CERTIFICATION SHEET CONFORMING TO ASTM

A1011/A1011M (10 GAUGE HOT ROLLED STEEL)

- VENDOR SHALL PROVIDE A SAMPLE (1%) OF EACH PALLET RUNNER SHIPPED TO MCAAP FOR

DIMENSIONAL CHECKS.

- CERTIFICATE OF CONFORMANCE DOCUMENTS SIGNED BY THE CONTRACTORS QUALITY

REPRESENTATIVE AND TIED TO THE SHIPMENT BY DATE OR NUMBER.

ALL SHIPMENTS SHOULD REFERENCE THE FOLLOWING INFORMATION:

CONTRACT NUMBER, DRAWING [1511AS201 REVISION G (PAGE 1 OF 3), 1151AS201 REVISION C (PAGE 2 OF 3) AND 1511AS201 REVISION C (PAGE 3 OF 3). ITEM NUMBER 1], AND ITEM # [CLIN0001, CLIN 0002]

(End of Summary of Changes)