Request for Information and Answers_as of 20 Sep 2023.docx
DOCX document 14 KB Posted
- Attached to
- Salt/Sand Spreaders
- Solicitation number
- W50S8023Q0007
- Issued by
-
Department of the Army National Guard
About this file
This document contains questions and answers regarding a request for information for salt/sand spreaders. The Army National Guard is seeking quotes to install salt/sand spreaders on three trucks located at Otis Air National Guard Base in Massachusetts within 250 miles. The truck beds measure 10 feet by 7 feet by 29 inches, 13 feet 11 inches by 81.5 inches by 35 inches, and back to the wall is 11 feet 1 inch. Installation must include dropping in the spreaders and installing the wiring harness.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 11D308.jpg | JPG image | |
| 5 ton 0056.jpg | JPG image | |
| 11D308-1.jpg | JPG image | |
| Request for Information and Answers.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Requests for Information
1. What base will these Salt/Sand Spreaders be install?
a. The quote asks that install takes place within 250 miles of zip code 02542, however, if the vendor wants to install the salt/sand spreaders on base, that is acceptable. Location: Otis Air National Guard Base, Massachusetts 02542
2. Will the spreaders be installed in the bed of the trucks?
a. The spreaders are to be drop installed and installing the wiring harness.
3. The description of the truck bed for the Spreader was unclear. No length of the bed of the truck. Where it a hydraulic lift extra. The end use need to provide both description.
a. Here are the measurements for the three truck beds for sanders.
08D00056: 10’ X 7’ X 29”, 39” with board 11D 308, 309, 337 : back to wall 13’11”,back to the hump is 11’1”X 81.5”X 35”, 43” with board.
File details come from the government source that posted it. Updated .