Answers to questions from Site Visit on 19 August 2026.docx
DOCX document 24 KB Posted
- Attached to
- Vehicle Lifts
- Solicitation number
- W50S7F26Q0036
About this file
This is a Questions and Answers document providing clarifications on site conditions discovered during a pre-bid site visit conducted on August 19, 2026, for solicitation W50S7F26Q0036. The document addresses two specific facility inquiries: the crane carriage height mounted on the ceiling measures 16'4" from the floor to the bottom of the crane guide rail, and the floor concrete thickness in the mounting areas is listed as 6" of reinforced concrete per the as-built drawings. These responses are directly relevant to offerors bidding on the vehicle lift equipment and installation services being procured by the Minnesota Air National Guard at their Duluth, Minnesota location. The clarifications address structural constraints that affect the installation and configuration of the four-post alignment lifts (CLIN 0001-0002) and 2-post symmetric lifts (CLIN 0003-0004) specified in the RFQ. The site visit and subsequent Q&A process led to an extension of the solicitation closing date from August 21, 2026, to August 26, 2026, allowing offerors adequate time to incorporate the discovered site conditions into their quotes and delivery timelines.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 148FW Form 66 Application Release (Fillable).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Answers to questions from Site Visit on 19 August 2026
1. What is the height of the crane carriage mounted on the ceiling?
The height from the floor to the bottom of the crane guide rail in 16’4”
2. What is the floor concrete thickness in the mounting areas?
The as-built drawing list the floor thickness as 6” of reinforced concrete
File details come from the government source that posted it. Updated .