W50S7F25Q0034 Mini Toolkits.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement is being issued as a request for quotation (RFQ) and constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2025-04. This combined synopsis/solicitation is set-aside 100% for small business. North American Industrial Classification Standard 332216 applies to this solicitation; business size standard is 750 employees. The Contracting Officer reserves the right to award under a different NAICS if the company would qualify as a small business under the solicited NAICS.

The Minnesota Air National Guard has a requirement for Brand Name or EQUAL--TOOLBOX with the tools listed below (Reference part numbers included in the right-side column):

The contractor shall furnish all tools, labor, equipment, transportation, and parts necessary for the supply and delivery of the Snap-On Tools and Toolboxes listed below:

REQUIREMENTS FOR TOOLBOX:

1. TOOLBOX MUST FIT INTO F-16 TRAVEL POD AND BE NO LARGER THAN 20.39” X 11.2” X 7.12”

2. TOOLBOX WILL BE ORANGE TO ACCOMODATE TSA REQUIREMENTS

3. ALL TOOLS AND TOOLBOX WILL HAVE A LIFETIME WARRANTY

4. BOX WILL BE KEY LOCKABLE

5. ALL CONTENTS WITHIN THE BOX WILL BE SHADOWED IN WITH BLACK ON YELLOW OR BLACK ON

RED LASER CUT FOAM.

6. ALL ITEMS WILL BE LASER ETCHED WITH THE TOOLBOX NAME

7. ALL TOOLS WITHIN SET WILL BE THE SAME BRAND. TO INCLUDE WRENCHES, SOCKETS, DRIVERS, PLIERS, HAMMERS, PUNCHES, ETC.

8. TOOLBOX POC (MSgt Brad Flannigan) WILL BE CONTACTED DURING TOOL LAYOUT AND HE WILL

GIVE FINAL APPROVAL FOR TOOL LAYOUT DURING THE FOAM CUTTING.

NOMENCLATURE

QUAN-

ITY EXAMPLE P/N

Tool Box 20 1535NF ORANGE

2 1/4 DI MIRROR 20 UIM225

PROTAC 2L-X Flashlights 20 STL88062

1/4 DR 3/16 STD HEX SOCKET DR 20 TMA6E

1/4DR 5/64 STD HEX SOCKET DR 20 TMA2.5E

FLAT TIP MINISCREWDRIVER .017X.125 20 SDD244

PHILLPS POCKET ORANGE SCREWDRIVER 20 SDDP204BO

10X MAGNIFIER GLASS 20 MCI03183795

18-20 9/16 5/8IN 15 SPLINE BOX WRENCH 20 XDES1820A

16 1/2IN HEX SHORT SPLINE COMMON WRENCH 20 OES16B

14 7/16IN HEX SHORT SPLINE COMMON WRENCH 20 OES14B

12 3/8IN HEX SHORT SPLINE 20 OES12B

10 5/16IN HEX SHORT SPLINE COMMON WRENCH 20 OES10B

8 1/4IN HEX SHORT SPLINE COMMON WRENCH 20 OES8B

3/8DR 3/8 12 SHALLOW SPLINE SOCKET 20 FES120B

1/4DR 10 5/16IN SHALLOW SPLINE SOCKET 20 TES10B

1/4DR 9 9/32 HEX SHALLOW SPLINE SOCKET 20 TES9B

1/4DR 8 1/4 HEX SHALLOW SPLINE SOCKET 20 TES8B

1/4DR 7 7/32 HEX SHALLOW SPLINE SOCKET 20 TES7B

3/8DR 5/8 20 SHALLOW SPLINE SOCKET 20 FES200B

3/8 DR 9/16 18 SHALLOW SPLINE SOCKET 20 FES180B

3/8DR 1/2 16 SHALLOW SPLINE SOCKET 20 FES160B

3/8DR 7/16 14 SHALLOW SPLINE SOCKET 20 FES140B

3/8DR 6IN LOCK WOBBLE EXTENSION 20 FXWKL6

3/8DR 80T STANDARD FOD RATCHET 20 F80FOD

1/4DR 72T STANDARD FOD RATCHET 20 T72FOD

1/4DR 2IN LOCK KNURLED EXT 20 TMXKL2

1/4DR 6PT 3/16 DEEP SOCKET 20 STM6

3/8DR 12PT 1 SHALLOW SOCKET 20 F321

3/8DRIVE ADAPTOR 20 A2A

1/4 DRIVE SQUARE ADAPTOR 3/8 DRIVE 20 GFAT1E

1/4 INTERNAL DRIVE 3/8 EXTERNAL DRIVE ADAPTOR 20 TA3

3/8DR 3IN LOCK WOBBLE EXT 20 FXWKL3

TORQ ADAPTOR 20 FRES20

TORQ ADAPTOR 20 FRDH141

3/8DR 9/16 18 DEEP SPLINE SOCKET 20 FEL180B

1/4DR FIX H/G SPEEDER 15IN BLK 20 TMS4EK

1/4DR 72T STANDARD FIXED BIT DRIVER 20 TM72

3/4IN 4 WAY ANGLE HEAD OPEN END WRENCH 20 VS24B

9/16IN 4 WAY ANGLE HEAD OPEN END WRENCH 20 VS18B

11/16IN 4 WAY ANGLE HEAD OPEN END WRENCH 20 VS22B

25D STRAIGHT MINI RATCHET HANDLE 20 BTWS

18-20 9/16 5/8IN SPLINE RACHET BOX WRENCH 20 RES1820C

3/8DR 1/4 SCREWDRIVER BIT SOCKET 20 FBS8

1/4 DR 1/4IN MAG SCREWDRIVER BIT SOCKET 20 TMBS8A

3/8DR 1/4 MAG SCREWDRIVER BIT SOCKET 20 FBSM8A

1/2DR 12PT 1 1/8 DEEP SOCKET 20 S361

SOFTGRIP 1/4IN DRIVER SHANK DRIVER 20 SGT4BR

SPRING CLAW PICK UP TOOL 20 YA837A

8IN WIRE TWIST PLIERS 20 WTG8A

7IN PLIER CURVED JAW WITH /CUTTER 20 LP7WR

VALVE DEFLATING TOOL 20 AVO968RB

10FT SAE TAPE MEASURE 20 TPMB10HV

MULTI TOOL 20 SMT97R

STRAIGHT 38 BLADE SET FEELER GAUGES 20 FBST338

LONG NOSE PLIERS 20 96ACF

7IN DIAGONAL CUTTER DIKES 20 87BCF

FLT .040IN INS H/GR RED SCREWDRIVER 20 SHD4R

FLT .035IN INS H/GR RED SCREWDRIVER 20 SHD2R

PH 2IN HARD GRIP HANDLE RED SCREWDRIVER 20 SHDP42IRR

PH 1IN HARD GRIP HANDLE RED SCREWDRIVER 20 SHDP31IRR

TREAD DEPTH GAUGE 20 TDG1

DEAD/BLW COMBO 16OZ HAMMER 20 HSPD16

FLEXIBLE MAGNETR PICK/UP TOOL 20 UPT2FL

SCRIBE STR/90 DEG BLK 20 YA339A

6IN LONG NOSE LOCKING PLIERS 20 LP6LN

3/8DR 11IN LCK WOBBLE EXTENSION 20 FXWKL11

3/8DR 1 1/8IN OPEN END CROWS FOOT WRENCH 20 FC36A

FOAM 46962-52737 20 FM1039580

Preparing and Submitting your Quote:

Offerors shall provide pricing for the above items inclusive of delivery to the Minnesota Air National Guard, 4680 Viper Street, Duluth, MN 55811-6022. These items must be delivered within 60 days after date of contract. If you cannot meet this request, please provide your best delivery date. Please make quotes valid for a minimum of 60 days.

Response is encouraged to include past performance information: other military, commercial, and civilian companies with whom you have done business. Include country of manufacture for all items.

Include feasible delivery dates.

Preferred CLIN structure example:

CLIN0001: Toolbox, 20 EA CLIN0002: Blowgun, 20 EA CLIN0003: Etc…

All questions and quotes must be directed to Rebecca Dimler at rebecca.dimler@us.af.mil and Joshua Fish at joshua.fish.1@us.af.mil no later than two business days prior to quote due date. All questions and answers must be in writing. Do not contact other Government personnel, as this will only delay receipt of answers. All questions and the answers provided will be released to all eligible offerors on a non-attribution basis. All terms and conditions remain unchanged unless amended in writing.

Place the solicitation number in the subject line of any email.

Evaluation:

The Government plans to award a contract resulting from this solicitation to the offer conforming to the solicitation which will be most advantageous to the Government and on the basis of a Best Value approach. Quotes will be evaluated using price, technical, delivery, and past performance. Technical, delivery, and past performance, when combined, are approximately equal to price. All solicitation specifications are not absolute and the 148FW will consider innovative solutions to this requirement.

Quotes may be comparatively evaluated in compliance with FAR 13.106-2 (b) (3). Be sure to submit/attach enough additional information to enable the Government to fully ascertain the specifications/capabilities of any products quoted.

The Government intends to evaluate offers and award a contract without discussions with offerors.

Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waiver informalities and minor irregularities in offers received.

GOVERNMENT INTENDS TO ISSUE ONE (1) CONTRACT BUT RESERVES THE RIGHT TO CONSIDER PARTIAL OR MULTIPLE AWARDS. If not already registered in SAM, go to WWW.SAM.GOV to register prior to submitting quote. At the time of evaluation of your quote, your company must have an active status in SAM.gov.

Electronic Documents: All electronic documents must NOT be “secured”, “locked”, or otherwise inaccessible. Submitter risks rejection if documents prove inhospitable to viewing and evaluation. Utilize standard Microsoft or Adobe formats, and net file size of all documents should be less than 10MB.

A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB Program; or

(E) Historically underutilized business zone small business.

The selected Offeror must comply with the following Clauses, which are incorporated herein by reference:

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) 52.204-19 Incorporation by Reference of Representations and Certifications. (DEC 2014) 52.212-4 Contract Terms and Conditions--Commercial Items (NOV 2023) 52.222-20 Contracts for Materials, Supplies, Articles, and Equipment (JUN 2020) 52.223-5 Pollution Prevention and Right-to-Know Information (MAY 2024) 52.232-39 Unenforceability of Unauthorized Obligations (JUN 2013) 52.233-2 Service of Protest (SEP 2006) 52.252-2 Clauses Incorporated By Reference (FEB 1998) 52.252-6 Authorized Deviations In Clauses (NOV 2020) 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.203-7001 Prohibition On Persons Convicted of Fraud or Other Defense-Contract-Related Felonies

(JAN 2023)

252.203-7002 Requirement to Inform Employees of Whistleblower Rights (DEC 2022) 252.204-7003 Control Of Government Personnel Work Product (APR 1992) 252.204-7009 Limitations on the use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (JAN 2023) 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting (DEV 2024-

O0013) (MAY 2024)

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (JAN 2023) 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services (JAN 2023) 252.211-7003 Item Unique Identification and Valuation (JAN 2023) 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials (SEP 2014) 252.223-7008 Prohibition of Hexavalent Chromium (JAN 2023) 252.223-7998 Prohibition on Procurement of Certain Items Containing Perfluorooctane Sulfonate or Perfluorooctanic Acid (Dev 2022-O0010) (DEC 2022) 252.225-7002 Qualifying Country Sources As Subcontractors (MAR 2022) 252.225-7036 Buy American--Free Trade Agreements--Balance of Payments Program--Basic (FEB 2024) 252.225-7048 Export-Controlled Items (JUN 2013) 252.225-7052 Restriction on Acquisition of Certain Magnets, Tantalum, and Tungsten (MAY 2024) 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime (JAN 2023) 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region (JAN 2023) 252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems (DEF 2024-

O0014) (AUG 2024)

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (DEC 2018) 252.232-7010 Levies on Contract Payments (DEC 2006) 252.237-7010 Prohibition on Interrogation of Detainees by Contractor (JAN 2023) 252.243-7001 Pricing Of Contract Modifications (DEC 1991) 252.244-7000 Subcontracts for Commercial Items (NOV 2023) 252.247-7023 Transportation of Supplies by Sea (JAN 2023)

Provisions:

52.203-18 Prohibition on Contracting With Entities That Require Certain Internal Confidentiality Agreements or Statements--Representation (JAN 2017) 52.204-7 System for Award Management (OCT 2018)

52.204-16 Commercial and Government Entity Code Reporting (AUG 2020) 52.204-17 Ownership or Control of Offeror (AUG 2020) 52.204-20 Predecessor of Offeror (AUG 2020) 52.204-22 Alternative Line Item Proposal (JAN 2017) 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) 52.204-29 Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures (DEC 2023) 52.207-4 Economic Purchase Quantity-Supplies (AUG 1987) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (FEB 2016) 52.211-6 Brand Name or Equal (AUG 1999) 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services (MAY 2024) AND Alt I (FEB 2024) 52.219-1 Small Business Program Representations (FEB 2024) 52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals – Representation (DEC 2016) 52.225-18 Place of Manufacture (AUG 2018) 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. (JUN 2020) 252.203-7005 Representation Relating to Compensation of Former DoD Officials (SEP 2022) 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls (OCT 2016) 252.204-7016 Covered Defense Telecommunications Equipment or Services-Representation (DEC 2019) 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation (MAY 2021) 252.204-7024 Notice on the Use of the Supplier Performance Risk System (MAR 2023) 252.225-7000 Buy American--Balance Of Payments Program Certificate-- Basic (FEB 2024) 252.225-7055 Representation Regarding Business Operations with the Maduro Regime (MAY 2022) 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region— Certification (JAN 2023) 252.225-7061 Restriction on the Acquisition of Personal Protective Equipment and Certain Other Items from Non-Allied Foreign Nations (JAN 2023) 252.225-7973 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems— Representation (DEV 2024-O0014) (AUG 2024) 252.239-7098 Prohibition on Contracting to Maintain or Establish a Computer Network Unless Such Network is Designed to Block Access to Certain Websites—Representation (DEVIATION 2021-O0003)

(APR 2021)

Provisions and Clauses for this synopsis/solicitation can be found in full text at https://www.acquisition.gov/. Additional required clauses other than those listed above may be included as Addenda on the award document.

52.212-2 Evaluation—Commercial Products and Commercial Services. (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offe-ror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Evaluation Method: Best Value – Tradeoff Evaluation criteria: Price, Technical approach, and past performance, all being equal in evaluation.

Price:

A. Overall price will be evaluated to determine it is complete and reasonable.

B. Proposal must be good for at least 60 days after submittal.

Technical Submission A. Quote describes how each element of the Statement of Work has been met.

B. Offerors must submit technical information (descriptive literature/specifications) that adequately demonstrates their quote meets the minimum standards required as specified in the Statement of Work.

C. A general statement of compliance or restatement of the requirement will be rated Non-Feasible.

D. New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.

E. Shipping is FOB Destination CONUS (Continental U.S.)

Past Performance A. Past Performance will be evaluated utilizing FAPIIS and/or SPRS. Negative or adverse action in the last three years may render the proposal to be rated lower.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all op-tions to the total price for the basic requirement. The Government may determine that an offer is unac-ceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(End of provision)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE

ORDERS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JAN 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C.

3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__(1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

__(2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

_X_(5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub.

L. 109-282) (31 U.S.C. 6101 note).

__(6) [Reserved].

__(7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

__(8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_(9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

__(10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115–390, title

II).

_X_(11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) (Pub. L. 115–390, title II).

_X_(ii) Alternate I (Dec 2023) of 52.204-30.

_X_(12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JAN 2025) (31 U.S.C. 6101 note).

__(13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

__(14) [Reserved].

__(15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

__(16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__(17) [Reserved] _X_(18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__(ii) Alternate I (Mar 2020) of 52.219-6.

__(19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__(ii) Alternate I (Mar 2020) of 52.219-7.

_X_(20) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15 U.S.C. 637(d)(2) and (3)).

__(21) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

__(ii) Alternate I (Nov 2016) of 52.219-9.

__(iii) Alternate II (Nov 2016) of 52.219-9.

__(iv) Alternate III (Jun 2020) of 52.219-9.

__(v) Alternate IV (Jan 2025) of 52.219-9.

__(22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__(ii) Alternate I (Mar 2020) of 52.219-13.

__(23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

__(24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__(25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

_X_(26) (i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632(a)(2)).

__(ii) Alternate I (Mar 2020) of 52.219-28.

__(27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

__(28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

__(29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

_X_(30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

_X_(31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_X_(32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025) (E.O. 13126).

__(33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

__(34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__(ii) Alternate I (Feb 1999) of 52.222-26.

__(35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

__(ii) Alternate I (Jul 2014) of 52.222-35.

__(36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

__(ii) Alternate I (Jul 2014) of 52.222-36.

__(37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

__(38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X_(39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

__(ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__(41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__(ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__(42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

__(43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

__(44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

__(45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

_X_(46) 52.223-23, Sustainable Products and Services (May 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C.

6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

__(47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__(ii) Alternate I (Jan 2017) of 52.224-3.

_X_(48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

__(ii) Alternate I (Oct 2022) of 52.225-1.

__(49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501- 4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112- 41, 112-42, and 112-43.

__(ii) Alternate I [Reserved].

__(iii) Alternate II (Jan 2025) of 52.225-3.

__(iv) Alternate III (Feb 2024) of 52.225-3.

__(v) Alternate IV (Oct 2022) of 52.225-3.

__(50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_(51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__(52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

__(53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__(54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

_X_(55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O.

13513).

__(56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

__(57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

__(58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

_X_(59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

__(60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__(61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

__(62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

_X_(63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C.

3901 note prec.).

__(64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

__(65) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

__(ii) Alternate I (Apr 2003) of 52.247-64.

__(iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__(1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

__(2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__(3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__(4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__(5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

__(6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

__(7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

__(8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

__(9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

__(10) 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (Jan 2025) ( 49 U.S.C. 40118(g)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(vii) (A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) (Pub.

L. 115–390, title II).

(B) Alternate I (Dec 2023) of 52.204–30.

(viii) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(x) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xvi) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (Jan 2025) (E.O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C.

3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C.

3901 note prec.).

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247- 64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.219-14 LIMITATIONS ON SUBCONTRACTING (DEVIATION 2021-O0008) (FEB 2023)

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) Definition. Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that—

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its so-cioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(c) Applicability. This clause applies only to—

(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(2) Part or parts of a multiple-award contract that have been set aside for any of the small business con-cerns identified in 19.000(a)(3);

(3) Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;

(4) Orders expected to exceed the simplified acquisition threshold and that are—

(i) Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or

(ii) Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);

(5) Orders, regardless of dollar value, that are—

(i) Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or

(ii) Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or

19.15 under multiple-award contracts, as described in 19.504(c)(1)(ii); and

(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business con-cern unless the concern waived the evaluation preference.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) Limitations on subcontracting. By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification Sys-tem (NAICS) code for—

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Gov-ernment for contract performance, excluding certain other direct costs and certain work performed out-side the United States (see paragraph (e)(1)(i)), to subcontractors that are not similarly situated entities.

Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract. The following services may be excluded from the 50 percent limitation:

(i) Other direct costs, to the extent they are not the principal purpose of the acquisition and small busi-ness concerns do not provide the service. Examples include airline travel, work performed by a transpor-tation or disposal entity under a contract assigned the environmental remediation NAICS code 562910), cloud computing services, or mass media purchases.

(ii) Work performed outside the United States on awards made pursuant to the Foreign Assistance Act of 1961, or work performed outside the United States required to be performed by a local contractor.

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situ-ated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 85 percent subcontract amount that cannot be exceeded; or

(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 75 percent subcontract amount that cannot be exceeded.

(f) The Contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause–

__ By the end of the base term of the contract and then by the end of each subsequent option period; or

_X_ By the end of the performance period for each order issued under the contract.

(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.

(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.

(1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Busi-ness Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions.

(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work per-formed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions.

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://piee.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF.

Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://piee.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report OR COMBO

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance-based payments, submit a performance-based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Field Name in WAWF Data to be Entered in WAWF CLIN(s) 0001 Pay Official DoDAAC F87700 Issue By DoDAAC W50S7F Admin DoDAAC ** W50S7F Inspect By DoDAAC BLOCK #15 Ship To Code BLOCK #15 Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) ____ Service Acceptor (DoDAAC) ____ Accept At Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Rebecca.dimler@us.af.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

NG Agency Protest Program is intended to encourage interested parties to seek resolution of their concerns with the National Guard (NG) as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum.

Contract award or performance is suspended during the protest to the same extent, and within the same time periods as if filed at the GAO. The NG protest decision goal is to resolve protests within 35 calendar days from filing. An agency protest may be filed with either the Contracting Officer or the NG Agency’s Protest Decision Authority, but not both, in accordance with NG protest procedures.

To be timely, the protests must be filed with the periods specified in FAR 33.103. To file a protest under the NG Agency Protest Program, the protest must request resolution under that program and be sent to the address below:

National Guard Bureau Office of the Director of Acquisitions/ Head of Contracting Activity

ATTN: NGB-AQ-O

111 S. George Mason Dr.

Arlington, VA 22204 Email: ng.ncr.ngb-arng.mbx.ngb-task-order-ombudsman@mail.mil

All other agency-level protests should be sent to the Contracting Officer for resolution at the address in the solicitation. See FAR clause 52.233-2.