W50S7522Q00080001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

1) Delete Performance Work Statement (PWS) paragraphs 5.1, 5.1.3, and 5.1.4. The requirements associated w ith these paragraphs are no longer required;

2) Change the Quantity and Unit of Measure on CLINs 0001 through 4001 from "12" "Months" to "9" "Job"; and

3) Extend the quotes due date from 10:00 AM PT on 22 Aug 22 to 10:00 AM PT on 26 Aug 22.

1. CONTRACT ID CODE PAGE OF PAGES

1 14

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 23-Aug-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W50S7522Q0008

X 9B. DATED (SEE ITEM 11)

07-Aug-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

23-Aug-2022

CODE

USPFO CA 146 MSC

119 MULCAHEY DR

PORT HUENEME CA 93041-4011

W50S75 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

KRISTIAN M. PERLAS / CONTRACTING OFFICER

(805) 986-7970 kristian_martin.perlas.2@us.af.mil

W50S7522Q0008

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 22-Aug-2022 10:00 AM to 26-Aug-2022 10:00 AM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The pricing detail quantity has decreased by 3.00 from 12.00 to 9.00.

The unit of issue has changed from Months to Job.

CLIN 1001

CLIN 2001

CLIN 3001

CLIN 4001

The unit of issue has changed from Months to Job.

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0001 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

12 mths. ADC 12 146 AW - CHANNEL ISLANDS ANGS

RANDOLPH T. VAN OTTEN

146 AW/EM

119 MULCAHEY DRIVE

PORT HUENEME CA 93041-4011

(805) 986-7883 FOB: Destination

F8S3EM

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

12 mths. ADC 9 146 AW - CHANNEL ISLANDS ANGS

RANDOLPH T. VAN OTTEN

146 AW/EM

119 MULCAHEY DRIVE

PORT HUENEME CA 93041-4011

(805) 986-7883 FOB: Destination

F8S3EM

The following have been modified:

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

FOR

OIL/WATER SEPARATORS AND GREASE TRAP SERVICES

7 August 2022

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform Oil/Water Separator’s, and Grease Trap Services, as defined in this PWS.

1.2 Background: The contractor shall be required to maintain and service oil/water separators, and grease traps, at Channel Islands ANGS in a manner that will ensure the health and general well-being of installation personnel

1.3 Period of Performance (PoP): The Period of Performance shall be 1 Base Year of 12 months and four 12-month option periods.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services between the hours of 6:30 AM to 4:30 PM on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. The performance shall be at Channel Islands Air

National Guard Station (CIANGS), Port Hueneme, CA 93041. The contractor shall at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the workforce are essential. Teleworking is not authorized.

1.4.1.1 Reserved

1.4.1.2 Unscheduled gate closures by the 146th Security Forces Squadron (146 SFS) may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.3 The contractor's employees shall become familiar with and obey the regulations of the installation;

including fire, traffic, safety, and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for the total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays. The contractor shall not perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure the non-recurrence of defective services. The contractor's QCP is the means by which it assures itself that its work complies with the requirements of the contract.

As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer Representative (COR) NLT 10 days after contract award. After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.4.4 Reserved

1.4.5 Access and General Protection/Security Policy and Procedures. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer's Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation's Security Forces, Director of Emergency Services, or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, Headquarters Air Force (HAF), and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1. The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

2. The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of the work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver s license, current vehicle registration, valid vehicle insurance certificate, and [insert any additional requirements to comply with local security procedures] to obtain a vehicle pass.

3. During the performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

4. When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with applicable sections of AFI 31-101, Integrated Defense, DODMAN5200.02, and AFMAN 16-1405, Air Force Personnel Security Program.

5. Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

6. Failure to comply with these requirements may result in withholding of final payment.

1.4.5.2 For Contractors that do not require CAC, but require access to a DoD Facility and/or Installation.

The contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Air Force Instruction (AFI) 10-245, AFI 31-101, and Air Force Manual (AFMAN) 31-113), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by Government representative)

1.4.5.3 Antiterrorism Awareness Level I Training (AT Level I). All contractor employees, including subcontractor employees, requiring access to US Government installations, facilities, and controlled access areas shall complete AT Level I training within 15 calendar days after the contract start date or the effective date of incorporation of this requirement into the contract, whichever is applicable. AT Level I may be accomplished by a Level I qualified instructor; by completing the Force Protection computer-based training (CBT) course on the Advanced Distributed Learning System (ADLS) or Joint Knowledge Online at http://jko.jten.mil. Tracking for each contractor or subcontractor employee is the responsibility of the COR or unit AT Representative. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the COR within 15 calendar days after completion of training by each employee or subcontractor personnel.

1.4.5.4 Reserved.

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information.

The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 Reserved.

1.4.5.7 Reserved.

1.4.5.8 Reserved.

1.4.5.9 Reserved.

1.4.5.10 Reserved.

1.4.5.11 Reserved.

1.4.5.12 Reserved.

1.4.5.13 Reserved.

1.4.5.14 Reserved

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured.

1.4.6.1 Reserved.

1.4.7 Special Qualifications: The contractor shall ensure all employees possess all required licenses for performing OWS and grease trap maintenance services in the performance of this contract. This does not include education or other qualifications for the position in which the contractor employee is performing, dress codes, or other information. (NOTE: The Government does not provide training to contractors.

Contractors must ensure that any personnel performing under a contract are fully trained, licensed, certified, and otherwise qualified to provide services.)

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post-award conference convened by the KO in accordance with FAR 42.5. The KO, COR, and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor's performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contractor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO. The CM or alternate shall have full authority to act for the contractor on all contract matters relating to the daily operation of this contract. The CM shall work through the COR, to resolve issues, receive technical instructions, and ensure the adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor's status as a "contractor" shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non- Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word "contractor" displayed.

1.4.10.1 The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicle passes) to the KO within 14 days of an employee's departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero-tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor during the performance of the contract. The Contractor shall notify its employees of the United States Government's zero-tolerance policy, and the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described in FAR 22.17.

1.4.12 Reserved.

1.4.13. Reserved.

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information, or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor's mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 Reserved.

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or services to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that is evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel is used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Reserved.

2.1.8 Quality Control: All necessary measures are taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have the privity of a contract with the subcontractor.

2.1.10 Oil/Water Separators: Oil/water separators are devices commonly used to separate oily waste products from wastewater streams. They are typically installed in industrial and maintenance areas to receive and separate oils at low concentrations from wastewater generated during industrial processes such as maintaining and washing aircraft and vehicles.

2.2 Acronyms:

AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager COR Contracting Officer Representative DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services IA Information Assurance IS Information System(s) KO Contracting Officer OCI Organizational Conflict of Interest OWS Oil/Water Separator PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PWS Performance Work Statement QA Quality Assurance QC Quality Control QCP Quality Control Program TE Technical Exhibit

3.0 Government Furnished Property, Material, Equipment, and Services (GFP/M/E/S): The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Reserved.

3.2 Reserved.

3.3 Reserved.

3.4 Reserved.

3.5 Utilities: All utilities in the facility will be available for the contractor's use in the performance of this contract. The contractor shall instruct employees in utility conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

5.0 Requirements: The contractor shall:

5.1 Perform required maintenance services on the OWS and grease trap per the manufacturer's operation and manuals (O&M), all applicable National Pollution Discharge Elimination System (NPDES) permits, federal, State, and local rules and regulations, and this PWS. If a manufacturer O&M is not available, use standard commercial practice or applicable NPDES permit requirements, whichever is more stringent.

5.1.1 The contractor shall pump all oil, oil residue, and other waste from separators. Drain separator completely. Inspect all parts for problems. Wash and drain the separator and fill it with clear water as required for the unique configuration of the separator.

5.1.2 The Contractor shall transport all waste from OWS to an off-base oil recovery and storage facility.

5.1.3 The contractor shall periodically inspect all parts of the separator and its draining system to prevent failures caused by operations, breaks, and mechanical settings. The contractor must become familiar with the piping and configuration of each separator. The contractor shall perform maintenance, cleaning, and draining to ensure optimal separation efficiency on all OWS.

5.1.4 Inspection and recommended frequency

Item Suggested Frequency Conventional Gravity Separator

Flight mechanism: flights, chains, sprockets, rails, drive

Visual weekly; detailed annually

Sludge hopper valves; open/close freely, close tight

Weekly

Oil skimmer mechanism: moves freely, level not plugged

Weekly

Skimming pump(s) Weekly Sludge pump(s) Weekly

Corrugated Plate Interceptors (CPI) Separator Parallel plates: fouling Weekly Skimmer weir: level Annually Skimming pump(s) Weekly

Sludge pump(s) Weekly Dissolved Air Flotation

Surface skimmer mechanism: drive, flight, roller, beach

Visual weekly; detailed annually

Bottom rake: flight Annually Pressurization pump and tank Weekly Back pressure valve: holds recommended back pressure

Weekly

Sludge valve: operates freely, closes tightly Weekly Skimming/bottoms pump(s) Weekly

5.2 The contractor shall pump out all grease and residues from the trap; remove waste build-up from the trap or pit walls and all associated equipment within the pit.

5.2.1 The contractor shall flush down with water and pump out the remaining residue as required by the unique configuration of the grease trap. Residual or recharge water must be higher than lower inlets.

5.2.2 The Contractor shall clear obstructions in inlet/outlet pipes to ensure unrestricted flow.

5.2.3 The Contractor shall transport all materials from grease traps to an approved off-base storage facility.

5.3 The contractor shall report the quantity of hazardous and non-hazardous waste removed from OWS and grease trap to the 146 CES Environmental Management office.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition Regulation Supplement https://www.acquisition.gov/dfars

UFC 3-240-03 Operation & Maintenance (O&M): Wastewater Treatment, Chapter 10

10/03/2019 https://wbdg.org/ffc/dod/unified-facilities-criteria-ufc/ufc-3-240-03

EPA/625/R-00/008 Onsite Wastewater Treatment Systems Manual – Revised February 2002

02/01/2002 https://cfpub.epa.gov/si/si_public_record_Report.cfm?La b=NRMRL&dirEntryID=55133

7.0 Applicable Regulations

Resource Conservation and Recovery Act (as amended by the Hazardous and Solid Waste amendments of 1984), subtitle C, “Hazardous Waste Management.”

Oil Pollution Act of 1990, Section 1001.

The Clean Water Act, Title 3, “Standards and Enforcement”, and Title 4, “Permits and Licenses”.

Title 40 CFR 260-282, “Hazardous Waste” Title 40 CFR Parts 104-149 “Water Programs”.

Title 40 CFR Part 110, “Discharge of Oil”.

Title 40 CFR Part 112, “Oil Pollution Prevention”.

Title 40 CFR Part 401-471, “Effluent Guidelines and Standards”.

Title 40 CFR Subpart F, “Releases from Solid Waste Management Units”.

TECHNICAL EXHIBIT 1

Oil/Water Separator & Grease Trap Inventory

Item Description Building Manufacturer Serial Number Capacity (Gals.)

1 Oil/Water Separator 901 McTighe POWS-2000-DW 2000

2 Oil/Water Separator 1601 Highland Tank & Mfg. Co. HTC 1000 1000

3 Oil/Water Separator 1503 McTighe POWS-1000-DW 1000

4 Oil/Water Separator 1502 McTighe POWS-1000-DE 1000

5 Oil/Water Separator 802 Rockford Sanitary Systems OS-5658-CP 1000

6 Oil/Water Separator 801 (West) McTighe POWS-500-DW 550

7 Oil/Water Separator 801 (East) McTighe POWS-500-DW 550

8 Oil/Water Separator 701 M.C. Nottingham Co. 8-750 750

9 Grease Interceptor M.C. Nottingham Co. B-1500 1500

TECHNICAL EXHIBIT 2

Oil/Water Separator and Grease Trap Locations

(End of Summary of Changes)