W50S6T22Q0011-0001 Amendment1 SF30.pdf

W50S6T22Q0011

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

A. Provide clarif ications of RFI questions, items, and procedures.

B. Extend the due date from 20 July to 22 July 2022 at 2pm.

C. Provide notification that requests for information (RFI) answ ers are addressed as an attachment.

D. Update PWS to clarify requirements.

E. Inform updates w ere annotated for CLIN 0001, 0003, and 0004.

F. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 16

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 19-Jul-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W50S6T22Q0011

X 9B. DATED (SEE ITEM 11)

23-Jun-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

19-Jul-2022

CODE

USPFO CA 144 MSC

5323 E. MCKINLEY AVE

FRESNO CA 93727-2197

W50S6T 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

1266229530N Typewritten Text

1266229530N Typewritten Text X

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 20-Jul-2022 02:00 PM to 22-Jul-2022 02:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

Provide round LED high bay, energy efficient light fixtures with lamps, UL for wet location (IP65), 28K lumens, 0- 10v dimming and color temperature of 4000K.

To:

Provide round LED high bay, energy efficient light fixtures with lamps, UL for wet location (IP65), 28K lumens, and color temperature of 4000K.

CLIN 0003

The CLIN description has changed from Unshielded & Non-cutoff Security Lights to Wall Pack LED Security Lights.

The CLIN extended description has changed from:

Provide, remove and install LED unshielded and non-cutoff luminaires with lamps, lumen output shall be limited to 4200 lumens but not less than 2000 lumens and a color temperature of 4000K. Provide and install in accordance with the PWS in the MSA location.

Provide, remove and install LED wall pack lights unshielded and non-cutoff luminaires with lamps, lumen output shall be limited to 4200 lumens but not less than 2000 lumens and a color temperature of 4000K. Provide and install in accordance with the PWS in the MSA location.

CLIN 0004

The CLIN description has changed from Fully Shielded LED Security Lights to Area Lights, LED Security Lights.

The CLIN extended description has changed from:

Provide, remove and install LED fully shielded or IES fully shielded luminaires with lamps, shall be limited 18,000 lumens but not less than 13000 lumens and a color temperature of 4000K. Provide and install in accordance with the PWS in the MSA location.

Provide, remove and install LED pole mounted area lights fully shielded or IES fully shielded luminaires with lamps, shall be limited 18,000 lumens but not less than 13000 lumens and a color temperature of 4000K. Provide and install in accordance with the PWS in the MSA location. Shielded to provide security camera visibility. Parking light/ shoebox area type light required.

The following have been modified:

PWS

Performance Work Statement

Upgrade High Bay, Security, and Operations Lights BLDGs 100, 121, 123, 194, 225 & MSA

21 June 2022

144TH FIGHTER

WING CALIFORNIA AIR NATIONAL GUARD,

FRESNO

TABLE OF CONTENTS:

1.0 DESCRIPTION OF SERVICES

2.0 SITE OF WORK

3.0 PERFORMANCE WORK STATEMENT

4.0 CONTRACTOR LICENSE REQUIREMENTS

5.0 PROJECT SPECIFIC REQUIREMENTS

6.0 GENERAL REQUIREMENTS

7.0 CLOSEOUT DOCUMENTATION

8.0 DEFINITIONS

9.0 ACRONYMS

1.0 DESCRIPTION OF SERVICES

This Performance Work Statement (PWS) describes contractor requirements for the project titled “Upgrade High Bay, Security, and Operations Lights, BLDGs 100, 121, 123, 194, 225 & MSA”. All work will occur at the Fresno Air National Guard Base, Fresno, California. The contractor is responsible to furnish and install all labor and materials to complete the items listed in this Performance Work Statement. The contractor shall provide the government a complete and usable product that will be inspected/accepted by the government at the completion of the project. All information included in this document, along with the instructions and standards referenced in the document, should be considered as part of the Performance Work Statement.

2.0 SITE OF WORK

All work will occur at the:

144th Fighter Wing, Fresno Air National Guard Base 5323 E McKinley Ave Fresno, CA 93727

3.0 PERFORMANCE WORK STATEMENT

3.1 Objectives: The purpose of this project is to replace the high bay lighting (following UFC 3-530-

01) in buildings 100, 121, 123, 225, and MSA with LED alternatives, upgrade the security lighting at the MSA compound, and install artificial daylight as well as LED upgrades in building 194.

3.2 Demolition

3.2.1 Contractor must remove all materials completely off 144th FW property.

3.2.2 Properly dispose of all light fixtures and light bulbs.

3.2.3 Provide a weight ticket to the Project Manager at the end of the project.

3.3 Directions

3.3.1 Remove and dispose approx. 136 old metal halide lamp fixtures in buildings 100, 121, 123, and 225.

3.3.2 Provide and replace approx. 136 round LED high bay energy efficient fixtures with lights, UL listed for wet locations (IP65), 28K lumens, and color temperature of 4000K.

3.3.2.1 The Government has approx. 36 round LED high bay lights that the contractor will also use for installation then provide 100 LED high bay lights for the rest of the buildings.

3.3.4 Please match to some of the existing round LED high bay lights in building 100.

3.3.4.1 Exist high bays are: Hubble Lighting CRN-40MV-EDU Premium Round High Bay LED. 4000K, 28,0000lm, 199 watts, 120-277. Diming not required for high bays.

3.3.4.2 Note: A compliant FAR 252.225-7001 Buy American And Balance Of Payments Program—Basic, version must be quoted.

MSA (Missile Storage Area)

3.3.5 Remove and replace all high/low pressure sodium security lighting systems to LED at the Missile Storage Area (MSA) following the guidance from UFC 3-530-01.

3.3.6 Provide and install approx. 43 wall pack unshielded and non-cutoff luminaires; lumen output shall be limited to 4200 lumens but not less than 2000 lumens and a color temperature of 4000K.

3.3.7 Provide and install approx. 35 pole mounted area lights fully shielded or IES fully shielded luminaires shall be limited 18,000 lumens but not less than 13,000 lumens and a color temperature of 4000K. Shielded to provide security camera visibility. Parking light/ shoebox area type light required.

3.3.8 Provide and install approx. 21 adjustable pole mounted flood lights which shall be 5000 lumens and a color temperature of 4000K. To be mounted on round pole.

3.3.9 Remove photo sensor(s) that control the lighting system in the Missile Storage Area (MSA). Install 3 programmable timer system switch(s), weather proof that control lighting systems in MSA area.

Building 194 Operations Group (OG) Vault

3.3.10 Demo and dispose of (35) existing 2’x4’ fluorescent light lenses and lamps, and (23) existing 6” fluorescent recess can light trims and lamps.

3.3.11 Remove and dispose of existing lighting control devices, to re-utilize conduit pathway and switch locations.

3.3.12 Provide and install (35) 2’x4’ ABL-Lithonia light fixture (Model# 2BLTR 48L ADP EZ1 LP840 N100 BAA) and lamps with retrofit kit, or equal.

3.3.12.1 An equivalent model must have the following features and specifications: 2’x4’ fixture retrofit kit, LED, center basket troffer, able to emit 4800 lumens on a 4000K color temperature, while using up to 40 watts, with dimming capability.

3.3.13 Provide and install (23) Lithonia 6” downlight (Model# LBR6 15LM 40K AR LSS MWD MVOLT UGZ1) and lamps with retrofit at existing locations, or equal.

3.3.13.1 An equivalent model must have the following features and specifications: 6 Inch round, LED, retrofit downlight, 120-277V, 1500 Lumens, color temperature: 4000K, clear reflector, semi-specular, with dimming capability.

3.3.14 Provide and install (5) ABL-healthcare Lighting, 2’x4’ (Model# HCV224 G MVOLT SP1 LED35) and (4) 2’x2’ (Model# HCV222 G MVOLT SP1 LED35) troffer with cloud image skylights, or equal.

3.3.14.1 An equivalent model must have the following features and specifications: Be 2’x4’ and 2’x 2’ fixtures as indicated, with illuminated high definition image creating a skylight effect with cloud image; images must be capable of being designed in a larger grid system; voltage: 120-277V; lamping type: 3500K LED. 2x2 - 327 Lumens. 2x4 - 654 Lumens. Dimmable. Gloss white finish. Exact image number(s) to be selected at or after award.

3.3.15 Provide and install complete “nLight” dimming, lighting control system and devices, or equal, as follows:

RM. 109 Man Trap – (1) NPODM DX WH USPOM 1-Zone dimmer switch or equal RM 110A/110B JAFN – (1) NPODM 4P DX WH USPOM 4-ZONE dimmer, (2) NPP16

EFP USPOM on/off sw. pack (skylight), (2) NPP16 D EFP USPOM 0-10V DIM PACK, (1) NPODMA Switch

RM 111 Briefing – (1) NPODM 4P DX WH USPOM 4-ZONE dimmer, (3) NPP16 D

EFPUSPOM 0-10V DIM PACK, (1) NPODMA SWITCH

Rm 113 WPO – (1) NPODM 2P DX WH USPOM 2-ZONE dimmer, (1) NPP16 EFP USPOM on/off pack (skylight), (1) NPODMA Switch

RM 114 File Server – (1) NWSX PDT LV DX WH USPOM WALL MOTION DIMMER RM 115/116 Pilot Briefing – (2) NPODM 4P DX WH USPOM 4-ZONE dimmer, (2)

NPP16 EFP USPOM on/off SW PACK (SKYLIGHT), (2) NPP16 D EFP USPOM 0-10V DIM

PACK, (1) NPODMA SWITCH

RM. 117 Pilot Briefing Small – (1) NPODM 4P DX WH USPOM 4-ZONE dimmer, (1) NPP16 EFP USPOM on/off sw. pack (skylight), (1) NPP16 D EFP USPOM 0-10V dim pack, (1) NPODMA switch.

RM 118 AMD – (1) NWSX PDT LV DX WH USPOM WALL MOTION DIMMER,

LOBBY/ENTRANCE/HALLWAY – (1) NPODM 2P DX WH USPOM 2-ZONE DIMMER, (1)

NPP16 D EFP USPOM 0-10v DIM PACK.

3.3.15.1 Equivalent switches shall have the same quantity of controls, LED green indicators, dimming capability, 24V ability and similar written nomenclature or arrow designs.

3.3.16 Provide and install conduit and wiring necessary to upgrade lighting.

4.0 CONTRACTOR LICENSE REQUIREMENTS

4.1 The primary contractor will possess a valid C-10 license or state equivalent to perform electrical work and be able to provide proof of competence in the area of work. The contractor may self-perform sections of the project. All employees performing as “electricians” shall be properly certified to perform electrical work.

4.2 It is the responsibility of the contractor to ensure any sub-contractor is properly C-10 licensed or state equivalent to perform electrical work, and any electrician employed by the sub-contractor is properly certified to perform electrical work.

5.0 PROJECT SPECIFIC REQUIREMENTS

5.1 The project shall be completed no later than 60 calendar days after start of performance.

The contractor and government can negotiate the final phasing if we schedule (as applicable) a review of the project at the post award conference.

5.2 Proposed substitution(s): If submitting an “equal” product for consideration, please include all relevant product literature to support the assertion.

5.3 All electrical work shall meet or exceed the national electrical code (NEC).

6.0 GENERAL REQUIREMENTS

6.1 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference and/or periodic progress meetings convened by the KO. These meeting may be conducted in person, virtually or a combination of the two. The KO, Project Manager and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

6.2 Available Utilities and Storage. The government will provide water, sewer and electrical connections. Unsecure outdoor storage area at the base is available and must be requested through the project manager prior to utilizing. Secured storage is the responsibility of the contractor.

6.3 Quality Control. Contractor shall develop and maintain a quality program to ensure work is performed as described in this Performance Work Statement and in accordance with all local, state and federal rules.

6.4 Quality Assurance. The Government will maintain a Quality Assurance Program to ensure work is performed as described in this Performance Work Statement and in accordance with all local, state, and federal rules. The Project Manager will manage the Government’s QA program.

6.5 Hours of Operation. The hours of work shall be between 7:00 a.m. and 5:00 p.m. Monday through Friday unless otherwise prescribed by this Performance Work Statement. Work shall not be performed on weekends, federal holidays and SDOs (scheduled days off) without prior coordination from the Project Manager. The 144FW base participates in a 5/4/9 compressed work schedule which provides a day off every two weeks. The Contracting Office or Project Manager will provide a list of scheduled days off after award.

6.6 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

6.7 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation.

Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance.

The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

6.8 Base Access. Base security requires all personnel entering the installation be cleared for access. The contractor will provide first name, last name, driver’s license number and applicable vehicle data for all personnel accessing the base. The contractor shall submit this information using the Wing Form and DBIDS Pre-Enrollment application no later than five working days prior to the date of required access. Contractor personnel are further required to email each employee driver’s license to the government project manager. All contractor personnel must maintain a valid driver’s license, vehicle registration and proof of insurance at all times while on the base. Real ID is the preferred identification for base vetting purposes. In lieu of Real ID, Original Social Security Card and Original Birth Certificate or a valid U.S. Passport will suffice.

DBIDS Pre-enrollment: https://dbids-global-enroll.dmdc.mil/preenrollui/#!/

6.8.1 For Contractors that do not require CAC, but require access to a DoD Facility and/or Installation. Contractors require a Defense Biometrics Identification System (DBIDS) Card.

Before DBIDS Card issuance, contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (AFI 10-245, AFI 31-101 and AFMAN 31-113), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

6.8.2 ACCESS AND GENERAL PROTECTION/SECURITY POLICY/PROCEDURES - The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Project Manager. The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation’s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, Headquarters of the Air Force and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

6.8.3 Antiterrorism Awareness Level I Training (AT Level I). All contractor employees, to include subcontractor employees, requiring unescorted access to US Government installations, facilities and controlled access areas shall complete AT Level I training prior to DBIDS badge issuance, contract start date, or effective date of incorporation of this requirement into the contract, whichever is applicable. AT Level I may be accomplished by a Level I qualified instructor in accordance with DoDI 2000.16 v1 Standard 9 and Table 1 curriculum. Tracking for each contractor or subcontractor employee is the responsibility of the Project Manager or unit AT Representative.

6.9 Communications Security (COMSEC)/Information Technology Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures.

The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

6.10 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

6.11 Technical Competence and Ability. If requested by the Government, the Contractor shall provide proof of technical competence and experience in the area of expertise required by this Performance Work Statement. The contractor shall be prepared to submit documents providing proof of successful competence such as training certificate or accreditations from recognized industry leaders. Contractors shall also be prepared to provide proof of successful project experience through references of former clients in related project types.

6.12 Dimensions and Quantity. All dimensions and quantities provided in the Performance Work Statement are estimates only. They are provided as a courtesy for contractors to estimate the magnitude of work or materials necessary to complete a task. They are not intended to be final measurements. The Contractor is responsible for verifying all dimensions and quantities in the field prior to starting work.

6.13 Warranty. The contractor shall guarantee all workmanship and materials covered under this Performance Work Statement for a period of no less than one (1) year from the date of project acceptance. This contractor’s warranty shall be included with any manufacturer’s warranties that accompany materials or systems installed as part of this Performance Work Statement.

6.14 Deliverables. Throughout performance, the contractor will be required to submit the documentation listed in Technical Exhibit 1 as specified.

7.0 CLOSEOUT DOCUMENTATION

7.1 Final acceptance will be contingent upon receipt of the following items:

7.1.1 Contractor workmanship letter of warranty up to one year.

7.1.2 All applicable O&M manuals

7.1.3 Waste disposal ticket(s)

8.0 DEFINITIONS

Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

Physical Security: Actions that prevent the loss or damage of Government property.

Project Manager: The Government Point of Contact for the Contractor; a representative for the Contracting Officer.

Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

9.0 ACRONYMS

AFI Air Force Instruction AFMAN Air Force Manual AT/OPSEC Antiterrorism/Operational Security BLDG Building COMSEC Communications Security DBIDS Defense Biometrics Identification System DoD Department of Defense FW Fighter Wing IES Illuminating Engineering Society K Kelvin KO Contracting Officer KV Kilo Volt LED Light-emitting Diode MSA Munitions Storage Area NLT No Later Than O&M Operations and Maintenance QA Quality Assurance QC Quality Control SDO Scheduled Day Off PWS Performance Work Statement UFC Unified Facilities Criteria US United States USPOM United States Point of Manufacture

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or

Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition

Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current/in dex.html or https://www.acquisition.gov/dfars

AFI 10-245

Antiterrorism 03/28/2013 (Certified current

03/30/2017) https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131

AFI 31-101

Security Forces Standards and

Procedures

08/18/2020 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131

AFMAN 31-113

Security Forces Standards and Procedures

03/05/2013 Change 1:

12/02/2015 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131

UFC 3-530-01

Interior and Exterior Lighting Systems and Controls

04/01/2015 Change 4:

11/01/2019 https://wbdg.org/FFC/DOD/UFC/ufc_3_530_01_201 5_c4.pdf

DoDI 2000.16 DoD Antiterrorism (AT) Standards

10/02/2006 Change 2:

12/08/2006 https://www.acq.osd.mil/ncbdp/nm/pseag/news-references/references/DoDI_2000.16.pdf?msclkid=7

28dd2c3cfd211ecb0249768548f21c5

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website Base Access Request Form N/A N/A (Local copy provided after award)

TECHNICAL EXHIBIT 1

Deliverables Schedule

PWS Reference / Deliverable Title

Frequency Number of Copies

Medium/Format Submit To

6.8 Base Access

Request Form

Initial request shall be provided no later than five

(5) business days prior to the anticipated performance start date.

Revised requests shall be provided as they become known and allow at least five (5) business days for processing.

1 copy Electronic (PDF format)

Project Manager

1.4.10 Identification

Media

Return within 10 business days of employee’s departure from contract performance.

Original(s) Hard Copy Project Manager

6.14 Project

Schedule(s)

Initial schedule shall be provided no later than Ten

(10) business days prior to the anticipated performance start date.

Any revisions shall be submitted for KO approval as soon as the need becomes known.

1 copy Electronic (PDF format)

KO & Project Manager

6.14 Safety Plan Shall be provided no later

than 10 business days after notification of contract award.

1 copy Electronic (PDF or Word format)

Project Manager

6.14 Quality

Control Plan

Shall be provided no later than 10 business days after notification of contract award.

1 copy Electronic (PDF or Word format)

Project Manager

7.1.1 Warranty

Letter for

Workmanship

Upon completion

1 copy

Electronic (PDF format))

Project Manager

7.1.2 O&M

Manuals (if applicable) or Word format)

3.2.3, 7.1.3 Waste disposal ticket(s) format)

(End of Summary of Changes)