JLG SOW.pdf
PDF 80 KB Posted
- Attached to
- MXG JLG REPAIR
- Solicitation number
- W50S6P26QG001
- Issued by
-
Department of the Army National Guard
About this file
This is a Statement of Work (SOW) for repair and maintenance services of two JLG Model 800AJ aerial lifts for the 189th Maintenance Squadron at Little Rock Air Force Base, Arkansas.
The contract requires the contractor to supply all necessary parts, labor, tools, equipment, and transportation to restore both lifts to fully functional, mission-ready, and safe operating conditions. For the first unit (Serial Number 0300264273), the work includes supplying and installing one Dual Axis Sensor (PN: 1001094400 or equivalent) and performing system diagnostics to clear fault codes. For the second unit (Serial Number 0300264128), the scope includes supplying and installing one Rail Pressure Sensor (PN: 70400220 or equivalent), one Pressure Relief Valve Kit, one Fuel Pressure Pump Kit, and one Wiring Harness Kit (PN: 2938317DTZ or equivalent), plus performing a Deutz engine timer reset and system diagnostics. Both units require comprehensive annual safety inspections in accordance with manufacturer specifications and ANSI/SIA standards, full preventative maintenance including replacement of all engine oil, fuel, hydraulic, and air filters, complete fluid changes, and lubrication of all moving joints and wear pads per the manufacturer's service manual. All work must be completed on-site at Hangar 207, Little Rock Air Force Base, 207 Vandenburg Boulevard, Little Rock, Arkansas 72099, with completion required no later than thirty calendar days after contract award. The contractor must deliver two fully operational and safety-certified lifts, comprehensive service reports for each unit detailing work performed and parts utilized, and formal safety inspection certifications or checklists. Final acceptance is contingent on both units operating according to manufacturer specifications without error codes, successful completion of full range-of-motion operational checks and drive tests by 189 MXS personnel, and submission and review of all required documentation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SN 0300264128 Engine Plate.jpg | JPG image | |
| SN 0300264273 Engine Plate.jpg | JPG image | |
| WD_15-5117.pdf | ||
| JLG SOW.pdf | ||
| W50S6P26QG002_Clause Set.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK (SOW)
REPAIR AND MAINTENANCE SERVICES FOR JLG MODEL 800AJ LIFTS
189TH MAINTENANCE SQUADRON (189 MXS)
LITTLE ROCK AIR FORCE BASE, AR
1.0 BACKGROUND
The 189th Maintenance Squadron (189 MXS) requires on-site repair and recurring preventative maintenance services for two (2) JLG Model 800AJ aerial lifts. These services are vital to return the equipment to fully mission-capable status and ensure compliance with all safety and operational standards.
2.0 OBJECTIVE
The primary objective of this contract is to completely restore both JLG Model 800AJ aerial lifts to fully functional, mission-ready, and safe operating conditions. This ensures the 189 MXS has reliable equipment necessary to support daily flightline operations and essential aircraft maintenance requirements without delay.
3.0 SCOPE OF WORK
The contractor shall provide all necessary parts, labor, tools, equipment, and transportation to perform the repairs and services detailed in this SOW. The scope includes specific component replacements for two separate JLG 800AJ units, comprehensive annual inspections, and full preventative maintenance services for both machines. All work will be performed on-site at the customer location: Hangar 207, Little Rock AFB, AR.
4.0 SPECIFIC TASKS AND TECHNICAL REQUIREMENTS
4.1 JLG 800AJ (Serial Number: 0300264273) - Dual Axis Sensor Replacement
4.1.1 Parts Supply: The contractor shall supply one (1) Dual Axis Sensor (PN:
1001094400 or equivalent).
4.1.2 Installation: The contractor shall install the new Dual Axis Sensor.
4.1.3 Diagnostics: The contractor shall perform system diagnostics to clear fault codes and verify correct operation of the sensor and lift system.
4.2 JLG 800AJ (Serial Number: 0300264128) - Fuel System and Wiring Harness Repair
4.2.1 Sensor Supply and Installation: The contractor shall supply and install one (1) Rail Pressure Sensor (PN: 70400220 or equivalent).
4.2.2 Valve Kit Supply and Installation: The contractor shall supply and install one (1) Pressure Relief Valve Kit.
4.2.3 Fuel Pump Supply and Installation: The contractor shall supply and install one
(1) Fuel Pressure Pump Kit.
4.2.4 Harness Supply and Installation: The contractor shall supply and install one (1) Wiring Harness Kit (PN: 2938317DTZ or equivalent).
4.2.5 Engine Timer Reset (Service): The contractor shall perform a Deutz engine timer reset.
4.2.6 Diagnostics: The contractor shall perform system diagnostics to confirm all new components are functioning correctly and that all associated system faults are resolved.
5.0 ANNUAL MAINTENANCE AND INSPECTION REQUIREMENTS
The contractor shall perform the following scheduled maintenance on BOTH units (S/N 0300264273 and S/N 0300264128):
5.1 Annual Safety Inspection
5.1.1 Inspection Standards: The contractor shall perform a comprehensive annual inspection in accordance with manufacturer specifications and ANSI/SIA standards.
5.1.2 Documentation: The contractor shall provide a formal record of inspection results and safety certifications to the 189 MXS representative upon completion.
5.2 Full Service / Preventative Maintenance
5.2.1 Filter Replacement: The contractor shall replace all engine oil, fuel, hydraulic, and air filters.
5.2.2 Fluid Changes: The contractor shall perform a complete engine oil change and top off all essential system fluids (including hydraulic fluid and coolant).
5.2.3 Lubrication: The contractor shall lubricate all moving joints, grease points, and wear pads per the manufacturer's service manual.
6.0 DELIVERABLES
The contractor shall provide the following deliverables to the 189 MXS point of contact upon completion of the services:
6.1 Operational Equipment: Two (2) fully repaired, operational, and safety-certified JLG 800AJ aerial lifts.
6.2 Service Reports: A comprehensive service report for each unit detailing the work performed, hours logged, parts utilized, and final operational test results.
6.3 Certifications: A formal certificate or checklist of completion for the annual safety inspection for each unit.
7.0 ACCEPTANCE CRITERIA
Final acceptance of the contractor's work is strictly contingent upon the return of both JLG units to the government in a fully functional and operational state. The 189 MXS point of contact will verify acceptance by confirming:
7.1 System Functionality: All mechanical and electronic systems operate according to manufacturer specifications without error codes or faults.
7.2 Verification Testing: Both units successfully complete a full range-of-motion operational check and drive test performed by 189 MXS personnel.
7.3 Documentation Review: All required service reports and annual inspection certifications (as outlined in Section 6.0) have been submitted and reviewed for accuracy.
8.0 PERIOD OF PERFORMANCE
8.1 Completion Timeline: All tasks outlined in this SOW, including specific repairs, annual preventative maintenance, testing, and submission of all deliverables, shall be completed no later than thirty (30) calendar days after the date of contract award.
8.2 Coordination: The contractor shall coordinate all on-site service dates and times with the designated 189 MXS point of contact prior to arrival.
9.0 PLACE OF PERFORMANCE
All work shall be performed on-site at the following location:
189th Maintenance Group (189 MXG) 207 Vandenburg BLVD.
Little Rock Air Force Base, AR 72099
File details come from the government source that posted it. Updated .