TechnicalRequirement_RMAC_19-39.pdf

RMAC 19-39 Technical Requirements

Description of Requirement:

Composite Materials & Missile Division works on material bonding systems where the surface of their substrates must be well prepared and understood at various locations. In order to prepare these surfaces for bonding a tool is required to quantitatively and precisely measure the surface to provide practical and precise feedback on the surface condition, in order to control bonding quality to a very tight requirement specification. This tool must be portable and flexible enough to fit inside of objects and along the exterior surfaces without having to relocate the object from the lab or manufacturing facility.

The required surface analyst tool must be a hand held portable surface analyst tool that can be used at multiple required locations and on very complex internal and external three (3) dimensional objects of large and small scales with the following specifications:

(1) Surface Analyst TSF (SA3001-TSF)

Tether - Allows measurements on hard-to-reach surfaces: horizontal, vertical, inverted, blind, contoured, and textured

Data Transfer Ports and Bluetooth - Allows users to connect wirelessly or directly to PC for transferring, data, images, and instrument updates

Live Video Scope Image displayed on screen

LCD touchscreen displays results in 2 seconds Customization for substrate and user log-in profiles

Logs and displays all inspection images and data history for review on instrument

Fluid Cartridge Uses non-destructive, highly purified HPLC water

Instrument Dimensions 10.8×5.2×22.9 cm (4.2×2.1:×9 in)

Instrument Weight .5kg (1lb)

Operational Temperature Range 55°- 90° F (13°- 32° C)

Fluid Measurements 1000 per cartridge

Minimum Inspection Clearance 1.2 in

Battery 2 hour charge cycle

Operation per Charge 5 hours of continuous operation

Inspection Time 2 Seconds

Comprehensive Care Plan (S-XTEND001)

Commissioning (S-COMMISSIONING)

Travel is not required in the performance of this contract.